Yahoo Groups archive
Messages
Page 387 of 564 · 28179 messages matched
2005-08-10 by Florian Anwander
Hi >>if you have bought the VCOs from any other person but a official >>distributor he might have changed those settings. >They were purchased from Doepfer's official UK distributor EMISmusic. So if you want this setting it to be changed you should contact them. Florian
2005-08-10 by Dieter Doepfer
If you need only offset und attenuation I'd recommend the new A-138 mixers. They already include the offset function for input one. Please look at our web site to the A-138 page for details: "New: From April 2004 an improved version of the module A-138b is manufactured. For the r
2005-08-10 by Florian Anwander
Hi I think there is no "wrong" or "right" range. The P6 is an offset, which can be set arbitrarily. I assume there is a standard setting by the production at Doepfer, but if you have bought the VCOs from any other person but a official distributor he might have changed those sett
2005-08-10 by analog1k
--- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > Hi > > I think there is no "wrong" or "right" range. The P6 is an offset, which > can be set arbitrarily. > > I assume there is a standard setting by the production at Doepfer, but > if you have bought the VCOs from a
2005-08-10 by Pierre Zeeman
Hi all, Could someone please confirm that I could replicate the attenuation and offset functions of the a129/3 in the following way: offset: a176 + mixer attenuation: a176 + a175 + mixer, or a176 + a138c Or is there something else going on with the a129/3 that I am missing? t.i.a
2005-08-10 by Florian Anwander
Hi >>The full set-up procedure is in the A-110 Service Manual, which is >>available at the Doepfer website (there's a link on the A-110 page). > Hmm... thanks but not very helpful, I do not wish to carry > out such a procedure, as I may make the matter worse with > the VCO. Then
2005-08-10 by analog1k
Thanks for that Florian. However I think my range is still off... This what my VCO's are now tuned to: 0 = note C3 -1 = note C2 -2 = note C1 +1 = note C4 +2 = note C5 according the a110 adjustment procedure that the above is wrong, it should be: -2 = note C3 -1 = note C2 0 = note
2005-08-09 by analog1k
--- In Doepfer_a100@yahoogroups.com, "Tim Stinchcombe" wrote: > The full set-up procedure is in the A-110 Service Manual, which is > available at the Doepfer website (there's a link on the A-110 page). > > Tim > Hmm... thanks but not very helpful, I do not wish to carry out such
2005-08-09 by Tim Stinchcombe
The full set-up procedure is in the A-110 Service Manual, which is available at the Doepfer website (there's a link on the A-110 page). Tim --- In Doepfer_a100@yahoogroups.com, "analog1k" wrote: > How do I calibrate one of my 3 VCO's in my system, > the other two are tuned to mid
2005-08-09 by analog1k
How do I calibrate one of my 3 VCO's in my system, the other two are tuned to middle C, so they are tune with the rest of my gear. But my 3rd VCO refuses to cooperate, turned to zero it will only tune to G#2, and at ten on the pot it will only tune to B2 - this is what I get pres
2005-08-04 by Zoran Bosnjak
Ingo, how do I order this chip? Where are the instructions to replace it on Doepfer web site ? Please help. Regards, Zoran >From: "selfoscillate" >Reply-To: Doepfer_a100@yahoogroups.com >To: Doepfer_a100@yahoogroups.com >Subject: [Doepfer_a100] new pic chip for the a154 >Date: Th
2005-08-04 by selfoscillate
hello zoran, maybe the a154 pic chip will be reprogrammed once again, so it is better to wait a few days before updating. i guess that dieter will post more details here in this forum about the update procedure soon. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "Zoran Bo
2005-08-04 by David Salter
For me I suppose 40 to 200 bpm would be good. That should cover most of my needs. Beyond that I can use an external LFO or VCO. David Salter Senior Project Manager Reuters Ltd Tel +44 20 7542 2402 Mob +44 7990562402 email david.salter@reuters.com RM david.salter.reuters@reuters.n
2005-08-04 by Dieter Doepfer
We could change the A-154 software to have a smaller clock range and consequently a more accurate control of the clock. Which clock range would be desirable ? Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100
2005-08-04 by selfoscillate
hello dieter, maybe 0,6 hz minimum = 36 bpm and 6 hz maximum = 360 bpm or 0,25 hz minimum = 15 bpm and 5 hz maximum = 300 bpm or 0,4 hz minimum = 24 bpm and 4 hz maximum = 240 bpm something like that ? what is the actual range of the a154 clock? i haven't measured the a154 clock
2005-08-04 by selfoscillate
hello, yesterday i changed the pic chip of my a154. it seems that the big jump in the clock tempo around 120 bpm has gone with the new pic. however the clock range seems to be the same with both pic's. it is still a bit touchy to adjust the clock to a certain tempo because of the
2005-08-04 by paradigmshiftbeats
Anyone know of a good source for 3.5mm patch cables in lengths shorter than 12 inches, perhaps 6 inches long? Thanks, Chris
2005-08-03 by denis goekdag
> B.t.w. We also think about a midi controlled vactrol unit (with > several midi > controlled vactrols and switches) to control such parameters including > switches via control change messages from a midi sequencer. > whaaaaaaaaa.......you aren't taking orders yet, are you? ;-) t
2005-08-03 by Dieter Doepfer
> And while I'm on the subject of vactrols... I can't seem to get a > mental picture of how this planned Universal Vactrol Filter is going > to control all these knobs, and even the knobs of other machines? It > sounds like magic to me... :-) The Vactrol (exactly: the resistor te
2005-08-03 by Dieter Doepfer
The single triggers are available at the 8 center terminals of the trigger/gate switches (upper or lower row). You will simply have to add 8 sockets that are connected to the center terminals e.g. of the upper trigger row (via 1k protection resistors to avoid problems with uninte
2005-08-03 by boward_k
when and where can I buy the universal AD/DA/bit cruncher??
2005-08-03 by Zoran Bosnjak
Great tip Bakis! Now when I own A-155, I start understanding what it is all about. Regards, Zoran And yes, the response is a little bit late :-) >From: Bakis Sirros >Reply-To: Doepfer_a100@yahoogroups.com >To: Doepfer_a100@yahoogroups.com >Subject: Re: [Doepfer_a100] Re: A155 >Da
2005-08-03 by ethanzer0
While the Serge is cool and the .com 960 clone has retro appeal, if you are going to spend that much on a sequencer, you should consider the Buchla 249e. That things runs circles around any currently available sequencer and is less expensive than the serge and not much more than
2005-08-03 by Florian Anwander
Hi > ...which leads me to a question: is there an easy way of replacing the > step octave knob with a smooth action one? I modified one of A110's: I added a switch, which adds a resistor of 100k parallel to R5 (1M); this expands the range of the "tune" knob to several octaves. Fl
2005-08-03 by Zoran Bosnjak
Hello everybody, I uploaded two audio files into folder "2 Sequencing Samples" in Doepfer group. (groups.yahoo.com) "5 steps.wav" shows how nice sequence can be created with only 5 steps, and 1st/last step feature on 154. "uneven steps.WAV" is a short techno sequence in which the
2005-08-02 by Robair, Gino
Hey folks, We're having the next Analog Heaven Bay Area gathering on Sunday, October 16 in Oakland, California at 21 Grand (www.21grand.org). We have a separate list if folks on this list are interested: http://lists.fdiskc.com/listinfo.cgi/ahcalifornia-fdiskc.com Hopefully Doepf
2005-08-02 by Zoran Bosnjak
Hi Florian, the decision has been made, the order has been placed. Instead of getting the second A-155, I ordered quantizer and A-152 CV switch with 8 stages. Combined with A-154 and A-155 I have already, I believe I will utilize this to it's fullest potential. And my second sequ
2005-08-02 by Zoran Bosnjak
To answer my own question: "Instead of voltage control even clock/reset controlled addressing of the active step is possible. The rising edge of each clock signal causes an advance to the next state. " And: "The digital output of the currently addressed turns to "high". All other
2005-08-02 by Anton Coops
ok Phil!! I'll check Ingo's site Thanx a lot Anton On 2 Aug 2005, at 17:11, ph@comcast.net wrote: > > > > > Hello everybody, > > > > I have the same question as Phil. > Well, not anymore, I grabbed one. This thing is amazing, it has so many possibilities from subtle to very extre
2005-08-02 by ph@comcast.net
> Hello everybody, > > I have the same question as Phil. Well, not anymore, I grabbed one. This thing is amazing, it has so many possibilities from subtle to very extreme, that samples don't help a whole lot. But I'll try and get some together. Ingo, has some samples on his site,
2005-08-02 by tkrakowiak
...which leads me to a question: is there an easy way of replacing the step octave knob with a smooth action one? best t On 8/2/05, Bryan E Cornell wrote: > I've noticed something to keep in mind when using the A110. I like to use > the octave knob a lot to jump up and down by oc
2005-08-02 by Bryan E Cornell
I've noticed something to keep in mind when using the A110. I like to use the octave knob a lot to jump up and down by octaves. If you are in the habit of doing this, you need to be careful because it is pretty easy to inadvertently turn the tune knob which is directly below the
2005-08-02 by Zoran Bosnjak
Hello, can somebody confirm if I am right on this: A-152 Voltage Addressed Track&Hold / Switch can be used with A-155 to provide separate trigger out on every step (like Moog 960 sequencer, without trigger ins, of course). Is that correct? Is there any other module that would do
2005-08-02 by Florian Anwander
Hi Zoran > I owned SH-101 that was modified to accept external sync... I sold it cause > I was trying to avoid "acid" sound (well, alternative was to glue resonance > to 0). I think it is one of the best sounding synths ever. Thanks for the > advice, Its not the sound (which can
2005-08-02 by Zoran Bosnjak
I owned SH-101 that was modified to accept external sync... I sold it cause I was trying to avoid "acid" sound (well, alternative was to glue resonance to 0). I think it is one of the best sounding synths ever. Thanks for the advice, Zoran >From: Florian Anwander >Reply-To: Doepf
2005-08-02 by Florian Anwander
Hi Zoran. another Idea that comes to my mind, is: get a Roland SH-101. The 101 provides my favourite quick-and-dirty-step-sequencer! Florian Zoran Bosnjak wrote: > Thank you Ingo and Florian for the responses. It looks to me that I will > have to acquire my third Doepfer 6U rack
2005-08-02 by freq_divider
Hello everybody, I have the same question as Phil. Are there any sound samples available from the vactrol phaser? It looks good on paper, but allready owning a quite few vintage phasers I wonder what it actually sounds like, and I would want to hear it before I order one. Just a
2005-08-02 by Zoran Bosnjak
Thank you Ingo and Florian for the responses. It looks to me that I will have to acquire my third Doepfer 6U rack eventually. The reason for sudden expansion: I stopped using computer/Cubase to make music. This completely hands-on approach makes me feel much better, and forced me
2005-08-02 by selfoscillate
ooops.... :-) yes indeed, i missed that one best wishes ingo --- In Doepfer_a100@yahoogroups.com, "analog1k" wrote: > Hehe Ingo... > > I have included the A-156, upper row after the A-155, > looks like you missed that one. ;) > > > --- In Doepfer_a100@yahoogroups.com, "selfoscill
2005-08-02 by Bakis Sirros
i just use my ears to tune my a100 vco's to whatever note i choose.i always have as reference a digital (VA) synth. regarding your next 6U rack purchase: your module choices seem fine to me! regards, bakis. --- analog1k wrote: > the A-176 VC source module where I can apply fine >
2005-08-02 by analog1k
Hehe Ingo... I have included the A-156, upper row after the A-155, looks like you missed that one. ;) --- In Doepfer_a100@yahoogroups.com, "selfoscillate" wrote: > --- In Doepfer_a100@yahoogroups.com, "analog1k" wrote: > > I also want to add another 6U to my 12U I have just now.
2005-08-02 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "analog1k" wrote: > I also want to add another 6U to my 12U I have just now. I want to add > a double A-155 sequencing unit. Can anyone tell me if this a good > choice of modules, or what modules I should need, thanks. > > This is my choice: >
2005-08-02 by analog1k
the A-176 VC source module where I can apply fine tune to the a-110. My Doepfer is an A-110 3-VCO system. I'm using a chromatic tuner to tune my OSCs, but I just wonder what pitch they should be tuned exactly to, is it A (440hz) or C. Or should I just my ears to tune my osc. I al
2005-08-02 by Florian Anwander
Hi Zoran > 1. I want to add second sequencer to my system. It has to be analog (no MIDI > please). Should I just slap another 155, or buy something else that is going > to expand even more? Hmmm, A155 is nice, but SND SAM16 is a real hit (I do not own it, but I'd like to). See ht
2005-08-02 by selfoscillate
> > 3. Is there a way to bypass changed reset functionality of 154 ? I prefer > > 155 way, where the reset moves you immediately to step one, and where you do > > NOT have to wait for next clock signal. > No, you can't. The addressing for the step position comes from the A154, >
2005-08-02 by selfoscillate
hello zoran, --- In Doepfer_a100@yahoogroups.com, "Zoran Bosnjak" wrote: > Hello everybody, > > I have just acquired A-154/A-155 combo. First: amazing. What a creative > tool. And here are the questions: > > 1. I want to add second sequencer to my system. It has to be analog (no
2005-08-01 by Bakis Sirros
me too. regards, bakis. --- ilanode wrote: > Hello Loren, like you and my namesake I'm much more > interested in the > TKS than in any seq. clone. Regards, Ingo > > --- In Doepfer_a100@yahoogroups.com, Loren Nerell > wrote: > > > On the other hand there are more seq.s in euro > r
2005-08-01 by Zoran Bosnjak
Hello everybody, I have just acquired A-154/A-155 combo. First: amazing. What a creative tool. And here are the questions: 1. I want to add second sequencer to my system. It has to be analog (no MIDI please). Should I just slap another 155, or buy something else that is going to
2005-08-01 by unknown freak
They're actually different in some important respects. You can find details on the 960 at moogarchives.com. --Chuck -----Original Message----- From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of Loren Nerell Sent: Monday, August 01, 2005 1:09 PM
2005-08-01 by Loren Nerell
> On the other hand there are more seq.s in euro rack and >mini jack format: Analogue Solutions' Oberkorn and their announced >SL16. Analgogue Systems RS200... Regards, Ingo How different is the AS RS200 sequencer from the moog one? They look very similar to me. Personally I'm mo