Yahoo Groups archive
Messages
Page 385 of 564 · 28179 messages matched
2005-08-29 by Bakis Sirros
dieter says: "at the moment we have still a lot of A-101-2 and A-101-3 left. I'd expect they will last at least until end of this year. Then we will have to decide if we make a redesign with other vactrols or if we are able to persuade the manufacturer to produce the old version
2005-08-29 by selfoscillate
hello dieter, will the new vactrols have a different timing (i.e. different release time)? afaik the current vactrols have a release time of approximately 200 ms, right? best wishes ingo --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > dieter says: > "at the moment we h
2005-08-26 by selfoscillate
hello matteus, good decision about the a101/1. regarding the examples, afaik doepfer is planning to implement some changes to their website, maybe then there will be more examples online. until then, you can request examples here and if i can find the time, i'll upload them. best
2005-08-25 by matteus_rex
Great to listen to some more sound examples! That ought to be standard for all modules at Doepfers site... I´ll order the A-101-1 for a start. matteus --- In Doepfer_a100@yahoogroups.com, "selfoscillate" wrote: > > i have a few sound examples on my homepage. > http://www.selfosci
2005-08-25 by denis goekdag
yes i suppose you could call the 106 "drier", the resonance can sometimes sound nearly like a squarewave. it's a beast, forget hi-fi nice-sounding stuff with it. which is why it's a cool filter, though ;-) from listening to them at the Musikmesse (less than optimal monitoring con
2005-08-25 by selfoscillate
i have a few sound examples on my homepage. http://www.selfoscillate.de just check the modular examples. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "matteus_rex" wrote: > Thanks for responses! > I don´t have either 105 nor the 101-1 yet. > How about the A106? A little
2005-08-24 by Hans Greuber
Hi List; Get a Roland OP8-M cheap as mine and let Dieter free to develope new ideas... Hans
2005-08-24 by matteus_rex
Thanks for responses! I don´t have either 105 nor the 101-1 yet. How about the A106? A little dryer sounding perhaps? I´ve only listened to the examples on the Doepfer site. matteus rex --- In Doepfer_a100@yahoogroups.com, "matteus_rex" wrote: > Which filter among Doepfers and co
2005-08-24 by esa kotala
Perhaps any non-normalising filter (such as out1 of the vactrol filter) followed by right kind of distortion Depending on the input sound, high resonance will *drip* at each harmonic when manipulating the cut-off point, resulting in pleasant "squelchs" when done in rapid successi
2005-08-24 by Josue Arias
Hi Bakis and list. I think this module would be great if it allows for +-10V, +-5V, 0-10V and 0-5V voltages as the analogue systems cv-midi interface, not only 0-5V as the doepfer one. This is the most important feature for me, so another poll or some words from dieter are need b
2005-08-24 by David Salter
Interesting idea. This would allow me to get my 155 sequences into Protools and then use them to drive softsynth's or use the 155's to drive my midi hardware. To be honest I don't think I'd want to pay too much for one of these as it's not likely to get much usage. Rgds David Dav
2005-08-24 by ilanode
Hello Matteus, If I'm not mislead by your poetic description I would say it`s the A-101-1. However, I know both mentioned filters (A-101-1 and 105) just from a brief testing at a local shop. Regards, Ingo --- In Doepfer_a100@yahoogroups.com, "matteus_rex" wrote: > Which filter am
2005-08-24 by synth_freak_2000
hello list, i just created a new poll for a cv to midi notes interfade module! it was suggested to me by dieter doepfer after receiving many requests from various a100 users for such a module. this new module will allow us to control all our midi synths(receving notes as well, no
2005-08-24 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: Would you like Doepfer to manufacture a CV-TO-MIDI NOTES INTERFACE Module? (this module allows to convert CV+Gate into midi note messages! So far, the doepfer a100 modular have no such a module. The A-
2005-08-24 by p. hendricks
On 8/23/05 11:17 PM, "Anton Coops" wrote: > very subjective, and depending on a lot of factors, but for a > combination of water and squelch you might want to try the a-105 > ssm-filter although, I haven't used the 105, the SSM2044 used in it was the first thing that popped into
2005-08-24 by Anton Coops
very subjective, and depending on a lot of factors, but for a combination of water and squelch you might want to try the a-105 ssm-filter On 23 Aug 2005, at 20:07, matteus_rex wrote: > Which filter among Doepfers and compatibles is > the most squelchy / watery sounding? > > Matte
2005-08-24 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "matteus_rex" wrote: > Which filter among Doepfers and compatibles is > the most squelchy / watery sounding? > > Matteus Rex hello matteus, thats a difficult question. terms like "watery" and "squelchy" in combination can be misleading, becaus
2005-08-23 by Paul Wagorn
Yep, you put it into the mode where the highest pitch note is actually a rest it's called note on/off see page 7 of the manual. Set the event type to PA1 PA5 or Pr1-Pr5 _____ From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of H ø R N Sent: Tu
2005-08-23 by ferisella
Hi guys. I'm selling this Doepfer controller PK88 I'm in New York http://newyork.craigslist.org/brk/msg/92720747.html
2005-08-23 by H � R N
Cheers... Just a dumb question.. when using the MAQ16 I usually end up with similar patterns.. I want to write rests into the pattern, just not pause, but have one or two of the 16 notes skip and not play a note.. is it possible? or am I only stuck with 16 notes which can be slow
2005-08-23 by matteus_rex
Which filter among Doepfers and compatibles is the most squelchy / watery sounding? Matteus Rex
2005-08-23 by denis goekdag
143/1 i like setting all 4 units to ad, then trigger the first one from a sequencer, in time. the other three will be triggered by the comparators automatically. when each ad controls a vca of ,say, a percussion sound, you can get really funky microsound rythms....and by simply c
2005-08-23 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "okiikahuna" wrote: > Since I spent my last couple of posts complaining about a module, I > just wanted to say something more positive. I just picked up a bunch > of the newer modules, including the A-143-1 complex envelope, A-154 > sequence c
2005-08-23 by Dieter Doepfer
> hello, > > looking at the a107 schematics, i'd say that it's the cem3379. > it is not only used as filter, it is also used as vca. > > best wishes > > ingo The VCA of the CEM3379 is used as the "normal" VCA, i.e. the VCA available with the front panel controls. Best wishes Diet
2005-08-23 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" wrote: > > hello, > > > > looking at the a107 schematics, i'd say that it's the cem3379. > > it is not only used as filter, it is also used as vca. > > > > best wishes > > > > ingo > > The VCA of the CEM3379 is used as the "no
2005-08-23 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "waveform100" wrote: > I have the impression that the Morphing Filters VCA is pretty nice and > clean. I found a good (and expensive) VCA SSM-Chip on the PCB, but I > have no idea if thats for the VCA or for the complex filter, without > follo
2005-08-22 by Dieter Doepfer
The four SSM VCAs are used to mix the outputs of the four filter stages of the CEM filter to obtain the different filters. The different filters are obtained by adding/subtracting the four filter stages: output = A*stage1 - B*stage2 + C*stage3 - D*stage 4 The factors A,B,C, and D
2005-08-22 by Bakis Sirros
hello list, i know that i have said this too many times, but, please, take the time to vote to our current polls!there are many open polls for many possible future a100 exciting new modules! most of these polls will end in about 3 to 4 weeks. so, please vote! best regards, bakis.
2005-08-22 by Bakis Sirros
although i had never met him, he will indeed be remembered. not only by me, but by all of us. he was one of the most important inventors of electronic music instruments/generators, as we know them today. best regards, bakis. --- selfoscillate wrote: > --- In Doepfer_a100@yahoogro
2005-08-22 by Pierre Zeeman
"okiikahuna" wrote: >Just to add a little more to my own last post, here is an idea [snip] >output to trigger the VCA and VCF. Great fun. Ok, I've got to get one of those sequencer thingies :) _________________________________________________________________ Search & browse smart
2005-08-22 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "okiikahuna" wrote: > I hate to be the one to bring this sad news ... > > http://www.moogmusic.com/?cat_id=80 > > K i've seen it coming. thats really bad. he will be remembered. best wishes ingo
2005-08-22 by okiikahuna
Thanks a lot for taking the time to check that for me, Ingo. At least I know now that I haven't missed something. K --- In Doepfer_a100@yahoogroups.com, "selfoscillate" wrote: > > hello, > > my a190 reacts the same way. the a190 offers > "last note prio" or "highest note prio" on
2005-08-22 by selfoscillate
hello, my a190 reacts the same way. the a190 offers "last note prio" or "highest note prio" only. in contrast the mcv24 offers modes like "lowest note + follow", which is the equivalent of what the minimoog does. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "okiikahuna"
2005-08-22 by okiikahuna
I hate to be the one to bring this sad news ... http://www.moogmusic.com/?cat_id=80 K
2005-08-20 by Zoran Bosnjak
"Sorry if I don't have any particularly astounding ideas." Thank you so much, I think the ideas you described here are very good start. I think that establishing relation between speed and mode change might be a killer patch on a very short sequences (3 to 5 steps), to create seq
2005-08-20 by okiikahuna
Just to add a little more to my own last post, here is an idea I've been playing with a lot: Assuming you want to use the sequencer to control pitch: You set up an eight note phrase on the eight stsps (the A-156 makes this easier but is not necessary) Now, clock the A- 149-1 Quan
2005-08-20 by okiikahuna
Hi, Zoran. Sorry about the last post. I clicked on the wrong button. I don't really have any special patches so far other than the really obvious ideas: I sometimes use an LFO to select the mode. Depending on the LFO speed, the mode can change in a way unrelated to the sequencer
2005-08-20 by okiikahuna
--- In Doepfer_a100@yahoogroups.com, "Zoran Bosnjak" wrote: > Hello, > > I also have A-154, and I was trying to figure out an effective patch that > would utilize mode voltage control feature; however, my imagination failed > me. Would you be so kind to share your patch with us?
2005-08-20 by waveform100
The SSM Chip is a SSM2164, A VCA Chip for 4 exponential VCA's. Pretty high quality. Doepfer could also just them for morphing or switching or to control the CV-Resonance. --- In Doepfer_a100@yahoogroups.com, "Tim Stinchcombe" wrote: > --- In Doepfer_a100@yahoogroups.com, "wavefor
2005-08-20 by Tim Stinchcombe
--- In Doepfer_a100@yahoogroups.com, "waveform100" wrote: > I have the impression that the Morphing Filters VCA is pretty nice and > clean. I found a good (and expensive) VCA SSM-Chip on the PCB, but I > have no idea if thats for the VCA or for the complex filter, without > follo
2005-08-20 by Zoran Bosnjak
Hello, I also have A-154, and I was trying to figure out an effective patch that would utilize mode voltage control feature; however, my imagination failed me. Would you be so kind to share your patch with us? Regards, Zoran >From: "okiikahuna" >Reply-To: Doepfer_a100@yahoogroups
2005-08-19 by fairlightus
Hi, my name is Jean, a new member and fresh owner of two racks of A-100 modules. Since I have a bit of overlap, I would like to trade or sell some modules. A-114 Ring Modulator A-115 Audio Divider A-116 Waveform Processor A-118 Noise / Random A-120 24dB Low Pass A-145 LFO 1 A-146
2005-08-19 by waveform100
I have the impression that the Morphing Filters VCA is pretty nice and clean. I found a good (and expensive) VCA SSM-Chip on the PCB, but I have no idea if thats for the VCA or for the complex filter, without following the trace. So, what IC did Doepfer use on that VCA?
2005-08-19 by okiikahuna
Since I spent my last couple of posts complaining about a module, I just wanted to say something more positive. I just picked up a bunch of the newer modules, including the A-143-1 complex envelope, A-154 sequence controller, A-149 Source of uncertainty and A-172 Max-Min. Its all
2005-08-19 by okiikahuna
Thanks for your reply, Ingo. I would really appreciate it if you take the time to check yours and see if it responds the same way. I don't think the problem is priority. Most of my digital synths use last note priority, while older analog synths, like my minimoog, are low note pr
2005-08-19 by denis goekdag
this filter screams like mad if it works properly, so no, you can't mistake it.... Am 19.08.2005 um 19:06 schrieb paradigmshiftbeats: > --- In Doepfer_a100@yahoogroups.com, denis goekdag wrote: > > if you patch a cable between the two resonance inserts, does the > > problem persi
2005-08-19 by denis goekdag
if you patch a cable between the two resonance inserts, does the problem persist? maybe the normalisation between the two sockets came off? other than that, yes, that sounds wrong. regards, denis Am 19.08.2005 um 17:47 schrieb paradigmshiftbeats: > Just received this filter, but
2005-08-19 by paradigmshiftbeats
--- In Doepfer_a100@yahoogroups.com, denis goekdag wrote: > if you patch a cable between the two resonance inserts, does the > problem persist? maybe the normalisation between the two sockets > came off? This was my first thought, too, but unfortunately it did not help. I presume
2005-08-19 by paradigmshiftbeats
Just received this filter, but I think the resonance is not working properly. No matter what settings are used for other parameters, turning the res knob has absolutely ZERO impact on the sound. I have even tried this with both clipping pots fully counter-clockwise and the LP lev
2005-08-19 by Dieter Doepfer
> -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von ALEX > Gesendet: Donnerstag, 18. August 2005 19:20 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a100] QUESTION about the MAQ16/3 > > > Is it pos