Yahoo Groups archive
Messages
Page 492 of 564 · 28179 messages matched
2003-03-21 by Joe Buechler
woops! Dieter seems to have already addressed this. Interesting, I wasn't thinking about using a protection resistor. Joe --- In Doepfer_a100@yahoogroups.com, "Joe Buechler" wrote: > I'm been thinking about modifing my A138a mixers so that channel 4 is > normalled to the fixed vo
2003-03-21 by Joe Buechler
I'm been thinking about modifing my A138a mixers so that channel 4 is normalled to the fixed voltage from the power supply, and you'd be able to adjust the offset voltage with the channel knob, but it would work like a regular mixer channel if you plugged in a patch cable. Joe --
2003-03-21 by code_pig
And nice one Bakis and Dieter. Thanks again. Regards (again), Kevin --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > --- Dieter Doepfer wrote: > > From: "Dieter Doepfer" > > To: "Bakis Sirros" > > Subject: > > Date: Fri, 21 Mar 2003 15:08:04 +0100 > > > > > Concering
2003-03-21 by code_pig
Nice one Tim. Thanks. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "Tim Stinchcombe" wrote: > Hi all, > > > I agree, this is something I am looking at building. > > My a129 never gets used and I really want a fixed filter, so if I > can > > make a module with 15 pots to co
2003-03-21 by Andreas Lindholm
Ohh, it can very much be used to full effect without the /4, but I second the motion that a smaller offset module should be great. And in that case I should wish for one that not only attenuates but also has the capacity to boost signals preferrably switched so you could set the
2003-03-21 by Andreas Lindholm
Sell the a129/3 to me and build on ;) ----- Original Message ----- From: "jmaddocks1975" To: Sent: Friday, March 21, 2003 11:31 AM Subject: [Doepfer_a100] Re: Offset module > Hi, > I agree, this is something I am looking at building. > My a129 never gets used and I really want a
2003-03-21 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: > Date: Fri, 21 Mar 2003 15:08:04 +0100 > > > Concering a message in the group: > > > > This might have already been discussed, but... > > > > I know the A129/3 does offsets, but might there be > r
2003-03-21 by Tim Stinchcombe
Hi all, > I agree, this is something I am looking at building. > My a129 never gets used and I really want a fixed filter, so if I can > make a module with 15 pots to control the a129/2 I got one. > Any ideas of best way to make it? I've posted a small schematic representing one
2003-03-21 by code_pig
My favorite filters (today, that is) are the A124 Wasp filter for reasons stated below, and the A109, which I just got. I really didn't care much for the A115 until I started running comical signals through it. I have to say that I've been using it more than I thought I would. TH
2003-03-21 by code_pig
I've been doing that, as well as using an inverter. But really, I'd rather just have an offset module. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "pstnotpd" wrote: > So why don't you run a +5 and the original signal through a linear > 138? That should do the trick, thoug
2003-03-21 by pstnotpd
So why don't you run a +5 and the original signal through a linear 138? That should do the trick, though it wouldn't save much space or money I suppose..... But then again, mixers are always usefull. --- In Doepfer_a100@yahoogroups.com, "code_pig" wrote: > Actually, I just wanted
2003-03-21 by code_pig
Actually, I just wanted a dual offset module because I really don't need (or have room for) and A129/3. I mean, I don't want to whine, but I really don't think it should be necessary for one to purchase the A129/3 (which really can't be fully expolited without the A129/4 Controll
2003-03-21 by jmaddocks1975
Hi, I agree, this is something I am looking at building. My a129 never gets used and I really want a fixed filter, so if I can make a module with 15 pots to control the a129/2 I got one. Any ideas of best way to make it? John --- In Doepfer_a100@yahoogroups.com, "pstnotpd" wrote:
2003-03-21 by selfoscillate
hello john, > > is the a102 the only lowpass filter you are planning to buy? > No. I plan to get the A-108 lowpass filter as well. > > Now the question is whether I should drop the Audio Divider module to > make room for the A102. if you mean the a115, then i would go for the a10
2003-03-21 by pstnotpd
Wouldn't that be fairly easy to make yourself? A number of pots 15 running from the internal power. Something like a CV source+ so that the 129 could be used as a filter bank, but much cheaper an space consuming. Or am I getting you wrong? --- In Doepfer_a100@yahoogroups.com, "co
2003-03-21 by code_pig
This might have already been discussed, but... I know the A129/3 does offsets, but might there be room for something like a simple dual offset generator module? Regards, Kevin
2003-03-20 by John
> Not really anything to do with enports prices but UK prices seem to > get cheaper all the time, Sure, rub it in the face of the new guy! :-) > only the Hi End VCO gets more expensive > (due to the curtis chip). Understandable, I suppose. > Also we have a Owners Club so we get a
2003-03-20 by John
> hello john, Hello. > the a102 is a nice piece of circuitry, but it is also strange. That's what I was hoping :-) > the filter resonance reacts totally weird, depending on the > incoming signal level, cutoff frequency and resonance level, > so setting up the filter is a bit diff
2003-03-20 by jmaddocks1975
Not really anything to do with enports prices but UK prices seem to get cheaper all the time, only the Hi End VCO gets more expensive (due to the curtis chip). Also we have a Owners Club so we get an extra 10% off..very nice :-) oh by the way, I've got a doepfer clock on my studi
2003-03-20 by hans greuber
Hi : ok ,thanks > >hello hans, > >the last thing i heard from doepfer regarding the morphing filter >is that we maybe have to wait until summer. i think june/july is >realistic. > >best wishes > >self oscillate _________________________________________________________________ Cha
2003-03-20 by selfoscillate
hello john, the a102 is a nice piece of circuitry, but it is also strange. the filter resonance reacts totally weird, depending on the incoming signal level, cutoff frequency and resonance level, so setting up the filter is a bit different, giving other results that all my other
2003-03-20 by pstnotpd
I tend to think that use of military force for defence is something different from use for an aggresive offencive war (as in this case). It has begun, so shame on the world. Let's stop this discussion before it gets out of hand like it almost did last time. People don't have to a
2003-03-20 by code_pig
I just got the A109 today. I like the characteristics of the filter, and the 3 VCA's are WAY handy (especially the panning section). Basically, with the one module I added a filter, a VCA, and a panning module... and it sounds very nice indeed. Thumbs up. Regards, Kevin
2003-03-20 by code_pig
I fully agree with you about politicians They, for the most part, are worthless cockroaches. You site all the negative aspects of the military, and seem to think that no soldier does anything but rape and plunder. What you ignore is that an opposing military force stopped said ma
2003-03-20 by code_pig
Matt, Doug has gone to Florida for the week. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "mritenburg" wrote: > Hello, > > I usually lurk here, however, I have to ask this question: Has > anybody had difficulty recently in contacting enport? > > Thanks, > > Matt
2003-03-19 by davevosh@aol.com
In a message dated 3/19/2003 5:29:58 PM Eastern Standard Time, timothy@tstinchcombe.freeserve.co.uk writes: > I too have also just succumbed to the 4th G6, which with the 155 and > the few other modules that came with it, is damn near half full > already. tim, i know the feeling
2003-03-19 by Bakis Sirros
hi john, the a102 diode filter is already available a long time ago!!!!!! bakis. --- John wrote: > --- In Doepfer_a100@yahoogroups.com, "Andreas > Lindholm" > wrote: > > And by all means do tell us what you did buy and > what you think > > about it when you get it! > > > I certai
2003-03-19 by Bakis Sirros
hey andreas,i agree 100%! bakis. --- Andreas Lindholm wrote: > Regarding supporting troops... > > I don't support any kind of troops(theirs, yours and > "ours") and I don't buy > that crap excuse "I only did my job". The law forced > me to enlist at a time > and I questioned and
2003-03-19 by John
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > hi john, > the a102 diode filter is already available a long time > ago!!!!!! > bakis. > Really?! I wasn't aware. The module overview page on the Doepfer website still states "(coming soon)" Now I'll have to dig out my co
2003-03-19 by John
> LOL! Perhaps they should stick a warning on each module, a la > cigarettes: "buying Doepfer modules is addictive and may harm your > bank balance" If you'll please permit me to expand on that slightly. There should have been a warning label on my FIRST synthesizer I bought year
2003-03-19 by John
--- In Doepfer_a100@yahoogroups.com, "Andreas Lindholm" wrote: > And by all means do tell us what you did buy and what you think > about it when you get it! > I certainly will. I sure wish the new TKB was available. I really wanted to add that to my custom "basic" system. But I w
2003-03-19 by Tim Stinchcombe
Hi John and Dave, > > for me to settle with only two rows of modules this first round. But > > I must try to be strong! :-) LOL! Perhaps they should stick a warning on each module, a la cigarettes: "buying Doepfer modules is addictive and may harm your bank balance" > getting oth
2003-03-19 by davevosh@aol.com
In a message dated 3/19/2003 1:50:40 PM Eastern Standard Time, jvtalbert@yahoo.com writes: > The huge modular systems I see in photos make it even more difficult > for me to settle with only two rows of modules this first round. But > I must try to be strong! :-) > > john, i star
2003-03-19 by davevosh@aol.com
In a message dated 3/19/2003 1:06:36 PM Eastern Standard Time, jvtalbert@yahoo.com writes: > Besides, I want to make sure > he stays around at this! john, a good point ! i`d hate to see a guy who is providing an honest service driven out of business by "grey market" stuff or exce
2003-03-19 by davevosh@aol.com
In a message dated 3/19/2003 10:00:59 AM Eastern Standard Time, mritenburg@yahoo.com writes: > I usually lurk here, however, I have to ask this question: Has > anybody had difficulty recently in contacting enport? > matt, no problem recently here - i exchanged a few e-mails with
2003-03-19 by Andreas Lindholm
Regarding supporting troops... I don't support any kind of troops(theirs, yours and "ours") and I don't buy that crap excuse "I only did my job". The law forced me to enlist at a time and I questioned and disobeyed all orders that I found offensive such as "if they don't stop whe
2003-03-19 by Andreas Lindholm
And by all means do tell us what you did buy and what you think about it when you get it! ----- Original Message ----- From: "John" To: Sent: Wednesday, March 19, 2003 7:10 PM Subject: [Doepfer_a100] Re: Happy Land of Modulars (was: Module Re: Enport's Doepfer Prices) > > john, >
2003-03-19 by John
> john, > welcome to the happy land of modulars ! as i look at my partially > filled 4th g6 frame, i already know what i plan for it and am > starting to think in terms of #5 ! then i see these gigantic > systems in the photo gallery and i > realize, i`m not even close yet ! :^)
2003-03-19 by John
> john, > hello ! i`ve been buying doepfer a-100 stuff from en-port since > 1999. [...]i have > always been satisfied with my en-port purchases and would recommend > them without hesitation. > best, > dave Thanks for the feedback, Dave. After giving this some thought last night,
2003-03-19 by Tommy DOG
I buy from Doug, I like the guy. He does honest business unlike some of the few companies that claim to sell Doepfer products in the US but are buying directly from him and selling at an inflated rate. I have bought a lot of Doepfer from him and years ago I bought my Sherman Filt
2003-03-19 by mritenburg
Hello, I usually lurk here, however, I have to ask this question: Has anybody had difficulty recently in contacting enport? Thanks, Matt
2003-03-19 by selfoscillate
hello hans, the last thing i heard from doepfer regarding the morphing filter is that we maybe have to wait until summer. i think june/july is realistic. best wishes self oscillate --- In Doepfer_a100@yahoogroups.com, "hans greuber" wrote: > Hello everybody : > > I´m wondering wh
2003-03-19 by hans greuber
Hello everybody : I´m wondering when will be out the new morphing filter. Just to start saving money Thanks: Hans _________________________________________________________________ Charla con tus amigos en línea mediante MSN Messenger: http://messenger.microsoft.com/es
2003-03-19 by Misugi
--- In Doepfer_a100@yahoogroups.com, Quantum Productions wrote: > that's fine with me > eric > > ----- Original Message ----- > From: "Misugi" > To: > Sent: Wednesday, March 19, 2003 3:54 AM > Subject: [Doepfer_a100] Re: Movie of Doepfer at Frankfurter Messe Hello, eric. Thank yo
2003-03-19 by Quantum Productions
that's fine with me eric ----- Original Message ----- From: "Misugi" To: Sent: Wednesday, March 19, 2003 3:54 AM Subject: [Doepfer_a100] Re: Movie of Doepfer at Frankfurter Messe > hello. > > Such an event is hardly held in Japan. > I saw a movie happily and This movie wants to i
2003-03-19 by p. hendricks
check out the info on the Digital pattern generator at the bottom of the old stuff page: http://www.blacet.com/cool.html the BZ is an updated version of this. best, phil
2003-03-19 by Misugi
hello. Such an event is hardly held in Japan. I saw a movie happily and This movie wants to introduce even A100 Japan User Group. Are you permitted UpLoad to me at A100 Japan User Group? Thanks. modular303j from Japan
2003-03-18 by Tim Stinchcombe
Hi Bret, > Could one of you synth gurus explain what the new Blacet Research > module does? Thanks a ton! http://www.blacet.com/ It's not exactly very clear by the description, is it? My guess is that it is rather like the A-115, only intended for clock/CV signals rather than aud
2003-03-18 by davevosh@aol.com
In a message dated 3/18/2003 4:01:27 PM Eastern Standard Time, jvtalbert@yahoo.com writes: > . I'm still getting over the > fact that I filled up two rows of modules faster than I though I > would. So I'm already ready to upgrade and I haven't even gotten the > first set of modul
2003-03-18 by davevosh@aol.com
In a message dated 3/18/2003 10:04:25 AM Eastern Standard Time, jvtalbert@yahoo.com writes: > Has anyone else in the U.S. purchased their Doepfer system from > Enport john, hello ! i`ve been buying doepfer a-100 stuff from en-port since 1999. the price increase you mention has be