Yahoo Groups archive
Messages
Page 491 of 564 · 28179 messages matched
2003-03-25 by code_pig
Hans, Email me if you want to get rid of your A112. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "hans greuber" wrote: > Hi all : > > >People have asked before and I am now agreeing with them, how about > >a new VCO? > > What Doepfer should do now is to do a MAC editor for
2003-03-25 by hans greuber
Hi all : >People have asked before and I am now agreeing with them, how about >a new VCO? What Doepfer should do now is to do a MAC editor for their A-112 sampler that I have unused and disconnected,Did they know that almost eveybody in the music community uses mac ?( well nowada
2003-03-25 by Tim Stinchcombe
Hi Jed, > i am the owner of an A-100 basic system who just joined your group. it seems as though the oscillators(A-110) in my system are not exactly in tune with eachother, when both the range and the fine tune (set to 0) are set the same, one oscillator is slightly higher >in pi
2003-03-25 by Paul Schulz
Hell yeah, the Yamaha filters sound really sweet. They had an old CS5 at my school, and the filters was the best thing on this machine.No idea if one can compare them to the filters of the CS80. Just checked the MOTM leaflet and saw that they also have a Yamaha filter ("MOTM-480
2003-03-24 by Bakis Sirros
hi andreas and jed, do you have the a185 bus access module???when you connect the a190 thru the a185 to the two a110's must stay pretty much in tune for some octaves... also,jed,about the two a110's: i think it's normal to have a slightly different pitch when the tune knobs of bo
2003-03-24 by Bakis Sirros
hi john, i definitely agree about the chaos module!!!(where is it???) and the new vco! bakis. --- jmaddocks1975 wrote: > Hi, > The Korg MS20 filter is easily one of my favourites, > you can > recognise it anywhere. That is the reason I bought > the Analogue > Solutions SY02 (and
2003-03-24 by Andreas Lindholm
I have had theese kind of problems myself with my A110 and that is why I hate it. I have recalibrated the damn thing about 20 times or so and it always gets out of tune after a while. So now I have given up and use it as an LFO. That's not very helpful and perhaps I have a crazy
2003-03-24 by Jed Cappelli
woops, my email client is on the fritz sorry about that, i wasnt getting a confirmation that the email was sent.
2003-03-24 by Joe Buechler
> it seems as though the oscillators(A-110) in my system are not > exactly in tune with eachother, when both the range and the fine > tune (set to 0) are set the same, one oscillator is slightly higher > in pitch. its slight, but still audible. is this normal? if not, > does anyo
2003-03-24 by Jed Cappelli
hello all, i am the owner of an A-100 basic system who just joined your group. it seems as though the oscillators(A-110) in my system are not exactly in tune with eachother, when both the range and the fine tune (set to 0) are set the same, one oscillator is slightly higher in pi
2003-03-24 by Jed Cappelli
hello all, i am the owner of an A-100 basic system who just joined your group. it seems as though the oscillators(A-110) in my system are not exactly in tune with eachother, when both the range and the fine tune (set to 0) are set the same, one oscillator is slightly higher in pi
2003-03-24 by Jed Cappelli
hello all, i am the owner of an A-100 basic system who just joined your group. it seems as though the oscillators(A-110) in my system are not exactly in tune with eachother, when both the range and the fine tune (set to 0) are set the same, one oscillator is slightly higher in pi
2003-03-24 by jmaddocks1975
Hi, The Korg MS20 filter is easily one of my favourites, you can recognise it anywhere. That is the reason I bought the Analogue Solutions SY02 (and an MS10), this filter is so close to the korg. Dieter has mentioned a few times that he doesn't see the point in making modules tha
2003-03-24 by Bakis Sirros
> ----- Original Message ----- > From: Dieter Doepfer > To: Bakis Sirros > Sent: Monday, March 24, 2003 3:36 PM > Subject: AW: new filter module on the way??? > > > > -----Ursprungliche Nachricht----- > Von: Bakis Sirros [mailto:syrros@ath.forthnet.gr] > Gesendet am: Montag, 24.
2003-03-24 by selfoscillate
hello bakis, maybe dieter should also purchase an analogue solutions sy02 filter for comparison and take a look at their efforts. they did really well with the sy02, but dieter can sure make some improvements like vc of resonance and the rest of those nasty things you already men
2003-03-24 by Bakis Sirros
hi psm, there are jumpers in the a176 cv source,not in the a136... bakis. --- ps_minor wrote: > which a136 user's guide has this info?? > > i re-read the pdf and checked the html from > doepfer.de and couldn't find any > mention of these jumpers. > > -psm > > > > > --- In Doepfer
2003-03-24 by Bakis Sirros
all these maybe politics to you,that you live in america,but are a matter of life and death for the people in iraq!no,we don't discuss politics here, but when there is happening a major crime against humanity,we just have to show our support to all these dying people... end of to
2003-03-24 by Joe Buechler
Actually, I *Did* mean the A136, which in addition to distortion/waveshaping, can be used for all sorts of utility purposes not intended or described in the user's manual - attenuator, voltage invertor, positive and negative CV source, gain stage, tracking function generator etc.
2003-03-24 by selfoscillate
> Bad news :-( > > After double checking my configuration diagram again, I remebered that > I *already* dropped the A-115 to squeeze in the Trautonium > controller (A-198). > > Now the only things left to exchange for the A102 are: > > A-117 (Digital Noise /808) > A-116 (Waveform
2003-03-24 by p. hendricks
On 3/23/03 6:22 PM, "ps_minor" wrote: > which a136 user's guide has this info?? yeah, I looked also not to be found I thought it may be the 176 they spoke of. anyway, I'm finding the a-136 great for processing the clock to an A-155 seq, (at least the old version) kinda controlled
2003-03-24 by ps_minor
thanks kevin, sorry, i thought joe was talking about the 136 (see : below), not the 176. seemed plausible since the 136 is also an amplifier..but also thought it to be odd for it to have such a different capability from it's orig purpose. anyway, so that's why i couldn't find it.
2003-03-24 by code_pig
It's in the A176 ontrol Voltage Source manual. You'll find it on page 3, heading number four labelled "Outputs", and listed item number five labelled "CV 3". It even has a little hand next to it. See? I really DID open the damn thing. Regards, Kevin --- In Doepfer_a100@yahoogroup
2003-03-24 by ps_minor
which a136 user's guide has this info?? i re-read the pdf and checked the html from doepfer.de and couldn't find any mention of these jumpers. -psm --- In Doepfer_a100@yahoogroups.com, "code_pig" wrote: > Bakis, Joe, > > I too am guilty, and stand corrected. One day I'll even lea
2003-03-24 by synchro1
so, are political opinions now considered acceptable on-topic posts there these days? And if so, what will the reaction be if someone posts detailed opinions supporting the US effort to contain a threat and enforce a negotiated cease-fire from 12 years ago? And if someone were to
2003-03-23 by code_pig
Bakis, Joe, I too am guilty, and stand corrected. One day I'll even learn to speak English as a language. By the way, are we actually supposed to read the manual? Regards, Kevin PS - I've moved one jumper... but I'd still like a dual offset module. --- In Doepfer_a100@yahoogroups
2003-03-23 by Bakis Sirros
hi kevin, not nessesarily...the a176 voltage source has positive as well as negative voltages. bakis. --- code_pig wrote: > An offset module would supply negative as well as > positive voltage. > If one was to use a A138 mixer, a A175 Inverter > would also be > required to get th
2003-03-23 by Joe Buechler
Gosh bakis, another case of where I hadn't read the user's guide! Didn't even know about those three jumpers. The A136 can be used as a positive or negative CV source. Joe --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > hi kevin, > not nessesarily...the a176 voltage so
2003-03-23 by code_pig
An offset module would supply negative as well as positive voltage. If one was to use a A138 mixer, a A175 Inverter would also be required to get the same results. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "Joe Buechler" wrote: > Yeah, and that's how I use it. But it al
2003-03-23 by Joe Buechler
Yeah, and that's how I use it. But it always feel bad to use up an entire mixer (or VCA) when all you need is a simple attenuator. Maybe this attenuator/offset module is a bad idea, it doesn't really add any new functionality to the system, and ten people would have ten different
2003-03-23 by andrew dalio
Maybe I'm missing the point, but isn't the a138 lin mixer just a voltage attenuator? Would that help? -andrew bunny
2003-03-23 by Andreas Lindholm
Not in particular, but I am sure you have ideas about it, you have almost every module. ----- Original Message ----- From: "Bakis Sirros" To: Sent: Sunday, March 23, 2003 12:37 PM Subject: Re: [Doepfer_a100] an important correction! > you mean synthfreak???me??? > bakis. > > > --
2003-03-23 by Joe Buechler
Hi Andreas I already have several gain modules - A119, A136, and A132 so I don't really need the amplification feature you proposed. If it's inexpensive to add, no problem. Include it as a poll feature. I like the idea of a +/- offset knob, but one problem is that it would be dif
2003-03-23 by Bakis Sirros
you mean synthfreak???me??? bakis. --- Andreas Lindholm wrote: > Well, it is probably all just propaganda but I am > delighted about the news > of only 3 dead up til now... Hope it keeps that kind > of body count and willl > end soon. > > Now for something more Doepfer. I have a
2003-03-22 by Andreas Lindholm
Well, it is probably all just propaganda but I am delighted about the news of only 3 dead up til now... Hope it keeps that kind of body count and willl end soon. Now for something more Doepfer. I have a hard time with this machine and thus can't draft a scetch of a attenutator mo
2003-03-22 by Bakis Sirros
hi list, oops,i don't know if the word sympathize is the correct one(??).what i mean is ,that i am really sad about all those lifes that are lost in irag,right now as we speak,just for oil... bakis. ===== synthfreak(parallel worlds) athens-greece [Doepfer_a100] group owner-modera
2003-03-22 by Andreas Lindholm
The difference here would be that you are dead serious about it I guess. I have voted, but I can wait a few more months for it although I am very curious about it. ----- Original Message ----- From: "Bakis Sirros" To: Sent: Saturday, March 22, 2003 6:24 PM Subject: Re: [Doepfer_a
2003-03-22 by Bakis Sirros
hi andreas, that's what i said to dieter,too, many days ago :-) but dieter wanted it to end in 27 of march because ,as he said,they were pretty busy working on all of the ,soon to be released, modules,so 27 of march would be ok... bakis. --- Andreas Lindholm wrote: > End it now a
2003-03-22 by synth_freak_2000
hi andreas, serious,yes. dead,no! thankfully,i'm not at iraq right now... but i sympathize all those lifes that are lost as we speak,just for oil... peace, bakis. --- In Doepfer_a100@yahoogroups.com, "Andreas Lindholm" wrote: > The difference here would be that you are dead serio
2003-03-22 by Andreas Lindholm
Well. As I see it now I can't make a vote cause I can only see one version of that module and that is the one I drafted so we atleast need to come up with alternatives for that setup. Anybody have alternatives? ----- Original Message ----- From: "Bakis Sirros" To: Sent: Friday, M
2003-03-22 by Andreas Lindholm
End it now and just make it ;) I'll probably buy any version of it anyway. ----- Original Message ----- From: "Bakis Sirros" To: "Doepfer_a100 group" Sent: Friday, March 21, 2003 11:12 PM Subject: [Doepfer_a100] another important reminder!!! > hi list, > please,come on guys!!!! >
2003-03-22 by Joe Buechler
I uploaded a picture of an offset module as I would like to see it. Joe --- In Doepfer_a100@yahoogroups.com, "Andreas Lindholm" wrote: > Well. As I see it now I can't make a vote cause I can only see one version > of that module and that is the one I drafted so we atleast need to
2003-03-22 by John
--- In Doepfer_a100@yahoogroups.com, "code_pig" wrote: > John, > > I've throw a VERY quick A124 example in the files section. I > apologise that it's about a meg in size, but... > > What I did was all manual, and quite frankly a bit cheesy. Having > said that, I think you'll get
2003-03-21 by ps_minor
would it be unreasonable to ask to just add this to the a138 line-up? maybe an 'a138c' or something for a few euros more..(??) features like this really make a difference when your talking about a bread-n-butter module such as the 138. a dual offset module w CV offset and voltage
2003-03-21 by Bakis Sirros
hi list, please,come on guys!!!! vote for the a107 poll.it will end in 6 days!then the final development of the a107 will begin!have your say! we are more than 255 members and the votes are only 15... :-( bakis. ===== synthfreak(parallel worlds) athens-greece [Doepfer_a100] group
2003-03-21 by Bakis Sirros
hi kevin, as far as i know, it's not ready yet. bakis. --- code_pig wrote: > Bakis, > > I must be blind, or was looking at too many > pictures, but I couldn't > find the DIY page. Do you have a link? THanks. > > Regards, > Kevin > > --- In Doepfer_a100@yahoogroups.com, Bakis Sirr
2003-03-21 by Bakis Sirros
hi list, ok andreas,feel free to create a poll... bakis. --- Andreas Lindholm wrote: > Ohh, it can very much be used to full effect without > the /4, but I second > the motion that a smaller offset module should be > great. And in that case I > should wish for one that not only a
2003-03-21 by Tim Stinchcombe
Hi Kevin, > I must be blind, or was looking at too many pictures, but I couldn't > find the DIY page. Do you have a link? THanks. I don't think it exists yet - some weeks back Dieter was talking about setting it up, but I'm not aware that it has happened yet. Maybe this thread wi
2003-03-21 by code_pig
John, I've throw a VERY quick A124 example in the files section. I apologise that it's about a meg in size, but... What I did was all manual, and quite frankly a bit cheesy. Having said that, I think you'll get the general idea of what the filter does. Regards, Kevin --- In Doepf
2003-03-21 by John
--- In Doepfer_a100@yahoogroups.com, "code_pig" wrote: > My favorite filters (today, that is) are the A124 Wasp filter for > reasons stated below, and the A109, which I just got. > > I really didn't care much for the A115 until I started running > comical signals through it. I ha
2003-03-21 by code_pig
Bakis, I must be blind, or was looking at too many pictures, but I couldn't find the DIY page. Do you have a link? THanks. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > --- Dieter Doepfer wrote: > > From: "Dieter Doepfer" > > To: "Bakis Sirros" > > S