Yahoo Groups archive
Messages
Page 59 of 564 · 28179 messages matched
2014-01-20 by achtung_999
Best way to get good sounding samples in the A112 is using Zoë's Python script. Convert the sample you want to use to 8 bits on your computer. Use Zoë's script to get it to a format that the A112 can use. And then transfer the result to the A112 using a mididump program. I would
2014-01-19 by mark@markfrancombe.com
Look... Im not sure what you guys have done inside the A-112 Sampler, but its a horrible hateful bastard of a module. I can NEVER get it to do what I want, have NO IDEA, whayt its supposed to sound like, but has the uncanny ability of, JUST WHEN IM GOING TO SELL IT, suddenly doin
2014-01-16 by syndromeda@telenet.be
Thanks Steve.
2014-01-16 by syndromeda@telenet.be
Thanks for that Steve.
2014-01-16 by yahoo@doepfer.de
Please refer to page 2 of the A-143-1 user's manual. Fig. 3 shows the trigger behaviour in detail. The A-143-1 can be retriggered only in the decay phase. A new trigger that appears in the attack phase has no effect as the module is already in the attack state. A retrigger would
2014-01-15 by Zoë Blade
> You may simply change the trimming of the scale of the internal HSVCO. It's > described in the document A1881_adjustment.pdf. A link to the document is > available on the A-188-1 info page. Thank you, I can't believe I missed that one! OK, that's three ways to solve my problem
2014-01-15 by achtung_999
The A108 and A120 are quite different. I used to own both. But sold my A120 since I never used it. The A108 is much more versatile. On Tue, Jan 14, 2014 at 11:09 PM, steve mantz mantzster@gmail.com > wrote: JMO but I'd think the A-120 wouldn't be much different from the A-108. Th
2014-01-15 by yahoo@doepfer.de
You may simply change the trimming of the scale of the internal HSVCO. It's described in the document A1881_adjustment.pdf. A link to the document is available on the A-188-1 info page. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups
2014-01-15 by Zoë Blade
> Surely you just need to amplify it a touch with A183-3 then run it through an offset/attenuator. Job done! Fantastic idea, thank you! Now I regret selling my A183-3, heh... Come to think of it, as I'm deriving the pitch CV using an MCV-24, I could retune that to compensate. Tha
2014-01-14 by JS Home
Surely you just need to amplify it a touch with A183-3 then run it through an offset/attenuator. Job done! Jonathan Shapero Sent from my iPhone On 14 Jan 2014, at 19:50, Zoë Blade wrote: > Hi! > > So I was trying out some basic Karplus-Strong synthesis on my A-188-1. It makes a r
2014-01-14 by steve mantz
JMO but I'd think the A-120 wouldn't be much different from the A-108. The SOS review from many years ago described the A-120 as pretty plain sounding. I think the A-108 is well thought of for Moog character. Not sure what ypu're after but I think you've got the Doepfer filter ra
2014-01-14 by Jonathan
Thank you. That is really helpful. I will try it later tonight Jonathan Shapero F rom my iPad On 14 Jan 2014, at 13:34, fleur.de.florence01@gmail.com > wrote: http://i56.servimg.com/u/f56/17/81/92/13/a154a110.jpg sorry there is a small error copying the link
2014-01-14 by Zoë Blade
Hi! So I was trying out some basic Karplus-Strong synthesis on my A-188-1. It makes a really nice sort of plucked string sound! I've been having great fun just playing a middle C and sampling it. It would be even nicer to play it live, with all those wonderful subtle imperfection
2014-01-14 by fleur.de.florence01@gmail.com
http://i56.servimg.com/u/f56/17/81/92/13/a154a110.jpg sorry there is a small error copying the link
2014-01-14 by fleur.de.florence01@gmail.com
Hello, Have you seen this document ? http://www.doepfer.de/pdf/A154_155_Connection.pdf maybe with this photo you can see better how the different parts are connected - Blue connections to the bus - Pink connections for sending a message between modules - Yellow power connection f
2014-01-14 by JS Home
Some help please. I bought an A-154 on eBay and the seller has removed the ribbon cables. The Doepfer manual does not show how they are connected to the board, only how they connect to the A155. Can anyone please just help me reconnect them up again so I don't blow up my module?
2014-01-13 by syndromeda@telenet.be
Well Florian, that was my thought too, but now I still do not know if it is worth buying a A-120. I already have the following filters in my system: A-101-1 / 105 / 106-1 / 106-5 / 106-6 / 108 / 122 / 124 / 127. As the A-108 is also a ladder filter it might be stupid to add a A-1
2014-01-12 by fleur.de.florence01@gmail.com
They are made in a demo set frameworks so as to be able to judge the quality of the filter I did not want to make a demo or hissing noise filter , demos like that there is full internet if you not find useful demos that I made it is your right , everyone has to judge the useful
2014-01-12 by Florian Anwander
Hello On 12.01.14 14:22 , fleur.de.florence01@gmail.com wrote: > yes there are pretty big differences, I made some demos of different > filters on my blog > http://synth4you.blogspot.be I have to admit I don't understand the sense of these demos. The sound is in a quite open st
2014-01-12 by fleur.de.florence01@gmail.com
yes there are pretty big differences , I made some demos of different filters on my blog http://synth4you.blogspot.be
2014-01-12 by syndromeda@telenet.be
Hi, Is there a real different in sound between the A-120 and the A-108. I already have an A-108, ladder-filter, and was thinking of adding an A-120, ladder-filter too, to my system but maybe thats idiot. Anyone? TIA, Danny
2014-01-12 by tom@worldofduff.co.uk
Many thanks for the reply. I found a spare 4001 and 084 in my bits box and tried switching them in. Turns out it was just the logic chip that had gone. All working again now. Cheers
2014-01-08 by yahoo@doepfer.de
If you ordered the modules from EMIS/UK you may send the modules to EMIS for repair. Andy Horell is familiar with A-100 repairs. But you may also send the modules to our address. But this would probably cause higher shipping charges. Best wishes Dieter Doepfer > Hi Dieter > > tha
2014-01-07 by dave_doobie@yahoo.co.uk
Hi Dieter thank you for the advice. I followed your instructions on both of my A-100LC6 units. The +5v leds are consistently as bright as the +12v/-12v leds on both rails of both units. Both adapters indicate that they are working. The A-190.1 lights up and will not reset. The A-
2014-01-07 by Scott Rogers
Hey Dieter I just want to say welcome back and thanks for all the hard work! We really do appreciate it and love the modules! Scott At 06:59 AM 1/7/2014, you wrote: >First of all: A happy New Year to all members. I'm back from the >Christmas/New Year break and will answer all que
2014-01-07 by yahoo@doepfer.de
I'd recommend to replace the (low cost) integrated circuits TL084 and CD4001. If this does not help you may contact the Doepfer representative in your country (e.g. EMIS if you are in the UK). Andy of EMIS is very experienced with A-100 repairs. Best wishes Dieter Doepfer > -----
2014-01-07 by yahoo@doepfer.de
Hello, the technical document is correct and so far no customer complained about the document (I know many users who connected their Dark Energy in the way that is described in the document). The way how you connected the two units is not how it is planned. When you connect both
2014-01-07 by yahoo@doepfer.de
Please look at the LED at the bus board that indicates the +5V. This LEDs has to be "on" with the same brightness as the +/12V LEDs. If the +5V LED is off or brighter than the +/-12V LEDs the A-100AD5 is faulty (if it's brighter there are more than +5V, if it's off there is no vo
2014-01-07 by yahoo@doepfer.de
The Dark Time does not generate tones but only the control signals CV and Gate that can be used to generate a tone. It depends upon the settings of the sound generation unit (especially release of the envelope generator) if the tone ends when the gate turns low. We considered the
2014-01-07 by yahoo@doepfer.de
These switches are used in the Dark Time (and other units): Manufacturer: Salecom Type: T8014-SECQ-E-E You find the data sheet on the Salecom website (www.salecom.com) Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doe
2014-01-07 by yahoo@doepfer.de
The Dark Time has the jump-to-step feature (use the jump position of the Continue/Jump/Stop switch). Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von > draks@apollo111.demon.co
2014-01-07 by yahoo@doepfer.de
Each USB network requies a host. It's not possible to connect only USB "slaves". A host is typically a computer with USB. Details on the FAQ page of our website: www.doepfer.com > FAQ > General > USB connection principles Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht-
2014-01-07 by yahoo@doepfer.de
First of all: A happy New Year to all members. I'm back from the Christmas/New Year break and will answer all questions little by little. The MAQ has no skip function but only a step off function (available via the single step). For live situations that's not very handy and I'd r
2014-01-05 by Martin Alaçam
Hi and a happy new year, Does the trigger on the 143-1 envelope behave like a re-trigger? In other words, does it re-trigger when it receives a signal, no matter in which phase it is? Thanks, Martin
2014-01-05 by tom@worldofduff.co.uk
Hi I have just plugged an A-140 into my bus board the wrong way round and it no longer triggers when fed a gate signal. Does anyone have any pointers as to what I have most likely fried and need to replace. Thanks in advance
2014-01-04 by blair_cowan@mac.com
Hi, regarding my earlier post about linking (not stacking) two dark energy units using the internal midi thru buss: I connected my two dark energy's using the supplied jumper lead, making sure that the the lead was plugged into JP5 of the sending unit, and JP6 of the receiving un
2014-01-04 by dave_doobie@yahoo.co.uk
Hi, thanks Flosynth and Florian for the prompt replies. I have swopped both my adapters around and discovered that both units still do not work so I must have blown a part somewhere whether it is the adapter or the modules I do not know yet. I may buy another adapter to see if th
2014-01-03 by Bakis Sirros
NODE - NODE 2 (DiN44) DiN44 | 2014 | Limited to 1,000 copies Release date 18th February 2014 Synth supergroup Node return with their first new release since 1995! “Node 2” features three of the original members, maverick producer and sonic legend Flood, renowned producer and comp
2014-01-03 by blair_cowan@mac.com
Florian, thank you for your detailed response. I currently use my Dark Energy mk2 as an additional vco, envelope generator and LFO for my Dark Energy mk1. I do this using the CV/gate inputs and outputs on each machine. On this basis I would want the midi note information received
2014-01-03 by Florian Anwander
Hello Am 03.01.2014 14:49, schrieb fleur.de.florence01@gmail.com: > More LC5V a Doepfer adapter has uen capacity 100mA, this is already the > need for A-113 alone > > it is best to place the A-rail 113 of the other A-190-1 with its adapter > to each The LC5V is a simple 7805 regu
2014-01-03 by fleur.de.florence01@gmail.com
More LC5V a Doepfer adapter has uen capacity 100mA , this is already the need for A -113 alone it is best to place the A- rail 113 of the other A -190- 1 with its adapter to each
2014-01-03 by Florian Anwander
Hello Dave Am 03.01.2014 13:18, schrieb dave_doobie@yahoo.co.uk: > Hi, I recently had both my A-190.1 and A-113 Sub harmonic generator > working on the same rail of my LC6 case. Each module had an AD5 +%v > adapter on the same rail and both worked fine for a while then they both
2014-01-03 by Florian Anwander
Hello Am 03.01.2014 12:32, schrieb blair_cowan@mac.com: > 1. Does it matter that my two Dark Energy's are different models, or > will this prevent the link from working? No they both are base on the same MIDI interface. All the differences between I and II are clearly marked in t
2014-01-03 by dave_doobie@yahoo.co.uk
Hi, I recently had both my A-190.1 and A-113 Sub harmonic generator working on the same rail of my LC6 case. Each module had an AD5 +%v adapter on the same rail and both worked fine for a while then they both decided to stop working. Now, the A-190.1 has all the LEDs illuminated
2014-01-03 by blair_cowan@mac.com
Hi, I have two Dark Energy's, a mk1 and a mk2, which I have physically connected together using the method described in the Technical Information documents that came with each. I also want to connect the two via midi, again using the method described in the Technical Information
2014-01-01 by Nicholas Keller
Or, if using with a modular system, employ a Sample & Hold module to control when the pitches hold and change. I've done that when using a single CV sequence and multiple Gate patterns to create several patterns from the one CV sequence (if two gate patterns are active simultaneo
2014-01-01 by christian ienni
exactly, what Florian said. i also find it helpful to set sustain to zero, and use both the decay & release settings to get the effect you want. On Wednesday, January 1, 2014 7:08 AM, Florian Anwander wrote: Hello The step-off setting only means, that no gate/trigger is sent. The
2014-01-01 by Florian Anwander
Hello The step-off setting only means, that no gate/trigger is sent. The question is not the sequence, but the sound setting. If the soundsettings have a long release, then the synth will of course sound on in the pause. He should try with a short or zero release, also he must se
2014-01-01 by draks@apollo111.demon.co.uk
My brother is having difficulty with his Darktime. He describes the issue below "I want to enter a rest in a sequence of 8 notes. So, as per the manual, I set the step to off and expect to hear silence of a duration equivalent to the notes of the rest of the sequence when the swe
2014-01-01 by Zoë Blade
Indeed. I notice a rather festive looking module from Doepfer too: http://www.doepfer.de/home_e.htm ;) Happy new year, everyone!