Re: [Ensoniq-VFX-SD] Saving new sequence and program
2001-08-29 by Bill Wilcox
Chris: Good thought, that OS upgrade. Is the eprom chip replacement a user-installable procedure? ... While you are doing the batt. install I would upgrade
Messages
Browse messages
Page 86 of 90 · 4465 messages matched
Re: [Ensoniq-VFX-SD] Saving new sequence and program
2001-08-29 by chris groce
While you are doing the batt. install I would upgrade the O.S.version from 3.0 to 4.10 you can get the eprom chips and the O.S. version disk from
Re: [Ensoniq-VFX-SD] Saving new sequence and program
2001-08-29 by Bill Wilcox
Serge, No, you ve got only one problem, no battery! Until you can find one and install it, save all your sequences, edited presets and the INT sound program
Saving new sequence and program
2001-08-29 by serge59@telocity.com
Hi, Just bought SD-1 (1991, rom 3.0, seq.OS 3.0, sequencer 75K) and got several problems or is it just one? After powering ON every time need to load sequencer
Re: [Ensoniq-VFX-SD] Re: Need info on battery replacement
2001-08-28 by Tim Sullivan
If your near a radio shack , use their 60/40 % solder , it s a great combination for most logic board soldering , it flows quick and easy and has enough flux
Re: Need info on battery replacement
2001-08-28 by Jeff Obranovich
Not sure if the battery is the problem, but if you ve never changed it, it would be the first thing I would try. Replacing the battery is pretty easy. I
Ensoniq VFX,VFXSD,VFXSDll,SD132 E cooler and Turbo E cooling unit available now
2001-08-14 by mishon66@aol.com
The E cooler and the Turbo E cooling units are avaialabale now at: www.hometown.aol.com/mishon66/index.html We also have a full line of Musicians manuals and
Re: [Ensoniq-VFX-SD] New to VFX-SD.. is this behavior normal with sounds?
2001-07-15 by keith cummings
Hi Tom, do you have the specific patch names of some of the sounds, that would help matters...could be the previous owner was a superb programmer, you ve got
New to VFX-SD.. is this behavior normal with sounds?
2001-07-15 by bensonh27@yahoo.com
Hello, I recently purchased a VFX-SD1 .. this is my first synth of any kind. There are certain sounds ( I would say about 85%) that exhibit strange behavior..
Re: [Ensoniq-VFX-SD] MIDI File
2001-07-12 by Oussama MKaabal
hi .., to the best of my knowledge VFS-SD1 is not GM complaint but the reason you getting the same instrument on all tracks is you probably you didn t change
Kjetil Naess/ALLIANSE/NO is on holiday.
2001-07-12 by Kjetil Naess
I will be out of the office starting 12.07.2001 and will not return until 06.08.2001. I will respond to your message when I return.
Re: [Ensoniq-VFX-SD] MIDI File
2001-07-12 by Bill Wilcox
I ve never tried this, but if you remap each track in the MIDI file to an SD1 sequence track with the proper sound program assigned to it, the file should play
MIDI File
2001-07-12 by Nello Pernice
Does anyone know if it is possible to play Midi File (Standard or General Midi?) with my PC connected via MIDI interface to the SD-1 synth? I tried but it
Re: [Ensoniq-VFX-SD] Selling my VFX-SDii
2001-07-09 by R. Green
Ill take it!???!? ... __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail
Selling my VFX-SDii
2001-07-08 by Niklas Olsson
I don t really know. Thinking about 200$. I think the prise is fair enough, due to the floppy drive. /niklas ... crashed,
Re: [Ensoniq-VFX-SD] (unknown)
2001-07-06 by Charles Hairston
Niklas Olsson wrote: Hi! I m thinking on to sell my VFX-SD(2). The floppy have really crashed, so there is no sequence software on it. But
Re: [Ensoniq-VFX-SD] (unknown)
2001-07-06 by mishon66@aol.com
In a message dated 7/5/2001 9:17:17 PM Central Daylight Time, niklas627@yahoo.se writes:
Re: [Ensoniq-VFX-SD] (unknown)
2001-07-05 by chris groce
How much do you want for it -Chris ... _________________________________________________________________ Get your FREE download of MSN Explorer at
Re: [Ensoniq-VFX-SD] (unknown)
2001-07-05 by Suzanne Archibald
... Just so you know, Ensoniq still have the sequencer OS disk image on their website. So if you want to reload the sequencer before selling to perhaps
(no subject)
2001-07-05 by Niklas Olsson
Hi! I m thinking on to sell my VFX-SD(2). The floppy have really crashed, so there is no sequence software on it. But the synth works fine. Any one interested
modify VFX to VFX-SD ????
2001-07-02 by herve_laporte@yahoo.fr
Hi All, I want to know if that s possible to modify easily the VFX to VFX-SD (adding Floppy, ctrl chip....etc etc) Thanks
VFX-SD Roms?
2001-06-27 by jjenkins@ameritech.net
I just re-acquired a VFX-SD from my parents (after YEARS of beggging :) but they didn t keep it up to date. It s currently running the 1.20 ROM. Does anyone
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by Suzanne Archibald
... There was a VFX upgrade that added the disc drive (and probably the sequencer board at the same time) so in essence what you re looking at is probably
Re: RE: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by Bill Wilcox
Interesting. I tried once to use an HD disk in my version 3.0 SD1 and it rejected the disk. I have no problem finding the DD disks. The large office supply
RE: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by Sixten
Hi Bill, Naaah ... you aren t nit-picky at all, nor is this my intention. Just wanted to add that you are right the VFX-SD and SD1 both use double density
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by Bill Wilcox
Working from a photo could be causing the confusion. I have seen VFX s with the cartridge slot in the same position (just in front of the mod wheel and pitch
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by chris groce
Ashe, The VFX never had a disc drive, It does use sound cartridges. When they came out with the VFX-SD that is when they added the sequencer and the disc
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by Todd Bryant
the VFX-SD uses standard 3.5 floppy disks. I have one and I am telling you this for sure. The format however is not a DOS format which means that the files
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by Bill Wilcox
Let s not perpetuate or escalate the confusion here. There is no such thing as a standard 3.5 floppy disk. There are double density and high density
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by In Aeternum
Ok.......looks like on the old model of the VFX a 3.5 drive was optional........so some have them and some do not......that explains some of the
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by In Aeternum
Thanks Suzanne....... The VFX board Im looking at is not the VFX-SD.........its the older VFX....and it does in fact have some sort of a disc drive....IVe only
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by In Aeternum
ok.....so now the VFX doesnt even use discs of any kind...... I KNOW athe VFX-SD uses 3.5 s......but thats not the board Im asking about.......Ive gotten every
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by Suzanne Archibald
... The *VFX* doesn t have a disc drive at all. The reason you ve gotten conflicting answers is because to many people here, VFX is taken as the series, and
RE: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by Sixten
Dear Ashe, yes, the VFX-SD uses normal Double Density 3.5 discs (I often ue High Density disks, but the VFX-system automaticly formats them correctly). Because
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by In Aeternum
ok....Im confused now.......does the VFX use 3.5 discs???? Im getting yes it does and no it doesnt......does anyone know for sure??? ~Ashe ... From: carl
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by Bill Wilcox
VFX does not use disks. VFX-SD and SD1 use 3.5 double density disks. Bill Wilcox bwilcox@hcarchitects.com 1-314-863-5717 ext. 146 Hastings+Chivetta
RE: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by carl engerer
they are very hard to find but i think thier is a web site that sells them ... From: Ashe [mailto:aeternumrecordings@hotmail.com] Sent: Tuesday, 19 June 2001
AW: [Ensoniq-VFX-SD] Re: VFX family disks
2001-06-19 by Michael Junck
Hi there! AFAIK it s not a problem to use HD-Disks if you put some tape on the slot (without the protection slider) Never heard any complaints from my SQ-80
Re: VFX family disks
2001-06-19 by manicmaestro@gateway.net
It should be noted too that these machines take double density, not the more up to date high density 3.5 disks. With Ensoniqs that was the case clear up to
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by Todd Bryant
yes it uses standard 3.5 floppies. T. ... From: Ashe Sent: Monday, June 18, 2001 8:54 PM To: Ensoniq-VFX-SD@yahoogroups.com Subject: [Ensoniq-VFX-SD] VFX
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by John
Sorry if I have given wrong info but my VFX did not have a floppy drive.(only a cartridge slot). My VFX-SD and my SD-1 do have 3 1/2 floppy drives. Thanks,
Re: [Ensoniq-VFX-SD] VFX discs
2001-06-19 by John
Hi Ashe, I think I would stay away from the VFX, this is my opinion. I would go with a Ensoniq VFX-SD or a SD-1, I have owned all three of these. There is
VFX discs
2001-06-19 by Ashe
Hi.... Im thinking of buying a VFX....can someone tell me if this model uses 3.5 floppys or does it use some sort of special disc....and if so how hard are
Looking for VFX drum patch
2001-06-15 by mick@scientist.com
Howdy, Was wondering if anyone has a drum kit patch for the VFX that has kick, snare, tom, hats, cymbals and claps or sticks? I have all the drum kits that are
RE: [Ensoniq-VFX-SD] VFXsd patches - (with subject this time)
2001-06-03 by Oussama
Hi Seve this link holds samples of certiun sounds sampled from a vfx any how this link won t help you. check these links
VFXsd patches - (with subject this time)
2001-06-02 by steve.walters@ntlworld.com
I,ve just bought a VFXsd and have been trying to download patches from http://www.soundcentral.com/keyboard/ensoniq/ensoniqvfx.html Is this site still active
(no subject)
2001-06-02 by steve.walters@ntlworld.com
I,ve just bought a VFXsd and have been trying to download patches from http://www.soundcentral.com/keyboard/ensoniq/ensoniqvfx.html Is this site still active
Calibration error... last episode !
2001-05-28 by frederic@hardouin.net
Hello to the group ! Goo old VFX, couldn t stand its non reliability and wanted to get rid of this well-known calibration problem ! So I decided to take a
Re: [Ensoniq-VFX-SD] What's causing high-pitch sound?
2001-05-19 by manicmaestro@gateway.net
hmmmm...I mean eeeeeee...just out of the blue, turn pressure off in your programs (no pressure routing). Otherwise it s something in the audio chain, a
What's causing high-pitch sound?
2001-05-19 by gegco@yahoo.com
VFXsd-ers, This developed over the last year... My VFXsd, once warmed up and after about 15-30 minutes of playing, produces a low-volume, and very high