Yahoo Groups archive
Messages
Page 11 of 29 · 1446 messages matched
2007-08-15 by TacocaT
Well I have four of them and I don't want any of them near the power supply. So I don't think that's an option. However, can you please inform me theoretically as to how the signal could be passing from one module to another without patch cables. Thanks --- In analogue_systems@ya
2007-08-15 by TacocaT
Actually I have not yet installed my VCA. If I plug my headphones directly into the output of one VCO I can faintly hear the pitch of the second VCO if I, say, do a frequency sweep with the POT of the second VCO. What would be allowing the signal from the second VCO to leak into
2007-08-15 by monroeeskew
That is strange. The modules are independent and don't pass signals through the power supply. Is the one VCO still connected to a VCA or mixer while you do this? Perhaps the VCA/mixer is not completely attenuating when it should be, so you may need to adjust a trimpot on it. One
2007-08-15 by TacocaT
Hello, I just recieved my rs15 case and I put a couple of doepfer style VCOs into th case and I can hear one VCO's output (faintly) through the other's output (no patches). This shouldn't be happening. Does it happen for anyone else? Is there also crosstalk when using the ASys po
2007-08-11 by nicholas_kent
--- In analogue_systems@yahoogroups.com, "monroeeskew" wrote: > > Hello, > > Does anyone know whether the modules made by Blacet Research > (http://www.blacet.com/) can be used in the Integrator? > > Thanks, > Monroe > *In* the Integrator? Quick answer: no, they are frac rack for
2007-08-06 by monroeeskew
Hello, Does anyone know whether the modules made by Blacet Research (http://www.blacet.com/) can be used in the Integrator? Thanks, Monroe
2007-07-22 by chad_kettering
Hello, Here is a euro rack/ frac system for sale on ebay. http://cgi.ebay.com/Modern-Analog-Modular-Synthesizer-Like-New-Doepfer_W0QQitemZ150143113622QQihZ005QQcategoryZ38071QQrdZ1QQcmdZViewItem Thanks for looking!
2007-07-22 by TacocaT
Anyone selling an RS Integrator system? I'm interested $1,800 shipped depending on condition and which system (1 or 2). Please let me know if you are at all interested or know some place/someone selling a used one. Thanks
2007-07-19 by jerry macdonald
hi...man i've never heaard of one, what are they?...thanks....Micmanus ----- Original Message ----- From: TacocaT To: analogue_systems@yahoogroups.com Sent: Tuesday, July 17, 2007 10:01 PM Subject: [analogue_systems] Looking to buy a used French Connection Hello all, I am a stude
2007-07-19 by TacocaT
http://www.analoguesystems.co.uk/Reviews/fconnection_review.htm --- In analogue_systems@yahoogroups.com, "jerry macdonald" wrote: > > hi...man i've never heaard of one, what are they?...thanks....Micmanus > ----- Original Message ----- > From: TacocaT > To: analogue_systems@yahoo
2007-07-18 by tommy_molotov
Hey Adam, the RS140 has an excellent response time and the built-in LFO is very useful. You can assign the mod wheel/stick to the LFO depth too which is a nice touch. Only downside I can really see is that it's monophonic, but poly midi->cv is quite rare. Then again, if someone a
2007-07-18 by Slow Alan
I cannot comment about using AS modules in Doepfer cases, although I do use Doepfer and other manufacturer modules in AS cases (they come with Doepfer power connectors, but not vice-versa). I understand you need an adaptor, available from Doepfer? to use AS in Doepfer cases. As t
2007-07-18 by TacocaT
Hello all, I am a student guitar/synth player and would like to use a french connection controller as part of my performances and in my home recordings. I would like to offer $1650 shipped for one in great condition. I'm located in massachusetts and might be willing to arrange a
2007-07-17 by junglephone
Hi, this is my first post here. Trying to find out about the RS Integrator modular system. Is anyone using the rs140 Midi/CV Converter and if so, how do you like it? Is anyone using RSI modules in a Doepfer case and how is it working? Do the RSI modules work well with other euro-
2007-07-15 by TacocaT
thanks for the info, I am definetly wanting to buy something that can convert midi to a 4 voice CV output (1 midi controller and 4 1v/oct outs and 4 velocity cv outs). Do you know how the RS370 compares to the MOTM midi-to-cv (http://synthtech.com/motm650.html). The motm module f
2007-07-13 by illektrobot
HI, I think I've a problem with my RS integrator, and I think it's coming from the power supply... The Vco dont seems to be stable, like all the others part in fact, the vcf and co, all are "like detuned" or make a very long oscillation... I can find where is the fault... thus i
2007-07-10 by Möbius Project
Hi, If you already have a midi keyboard that has touch sensitivity, and you want more voices, I would look into the RS370. This is one of the most advanced cv/midi converter ever made, and you will also be Introduced to the P.P.G world, additive synthesis, and you will bee have a
2007-07-09 by Bakis Sirros
very nice!! --- Bryan Lowe wrote: > I've owned a French Connection for a while, but have > been distracted > by other things lately. > > Got back to the instrument recently when I was asked > to fill in on > rehearsals for Messiaens Turrangalia symphony. > > Did a YouTube video o
2007-07-09 by Bryan Lowe
I've owned a French Connection for a while, but have been distracted by other things lately. Got back to the instrument recently when I was asked to fill in on rehearsals for Messiaens Turrangalia symphony. Did a YouTube video of an early practice session. http://www.youtube.com/
2007-07-06 by wayne greenhaw
i own a new demon it is absolutley beautifull the wheels change colers as they are moved pitch goes blue purple red mod goes blue to green ..when you say voices do you mean polyphony it is not polyphonic the midi controllers on the left only work with the midi signals comeing in
2007-07-05 by TacocaT
I'd like to know more of the features of the Demon. The product page here has very littled info and no link to a manual: http://www.bigcitymusic.com/product.asp?cat=new&pid=1000100 That pages lists the following features: * New colorfully backlit acrylic wheels! * Midi-interface
2007-06-23 by analogue_systems@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the analogue_systems group. File : /MIDI-Edrummer Uploaded by : midi_jazz Description : You can access this file at the URL: http://groups.yahoo.com/group/analogue_syste
2007-06-03 by dingfutzer
The following gear auctions end this evening on eBay: Electra EP-550 12 Bit Delay PAiA Tubehead Kenton Pro4 Midi/CV Converter w/custom machined and wired single rackspace patch panel Sequentix P3 Sequencer - Factory built, unused and new in box Doepfer A100: A114 Ring Modulator,
2007-06-01 by austrohungaro2006
Hello Yes, I am using Doepfer's A-190 MIDI to CV. > > Hi, Are you using a midi/cv converter or an analogue master controller to > controll the pitch of the vco? > > Regards > Audiobersjerk > > > >From: "austrohungaro2006" > >Reply-To: analogue_systems@yahoogroups.com > >To: analo
2007-06-01 by Möbius Project
Hi, Are you using a midi/cv converter or an analogue master controller to controll the pitch of the vco? Regards Audiobersjerk >From: "austrohungaro2006" >Reply-To: analogue_systems@yahoogroups.com >To: analogue_systems@yahoogroups.com >Subject: [analogue_systems] RS95E tuning fa
2007-05-30 by austrohungaro2006
Hi, I'm new to the list. I have some AS modules in a Doepfer portable suitcase (alongside with Doepfers and Cwejmans). I use my system live as bass synth. Some weeks ago my AS Oscillator RS95E did that strange thing: Suddenly the tuning fell down a fifth! During the soundcheck it
2007-05-29 by (i think you can figure that out)
I'm very pleased to announce AnalogLive! - an all-analog live ensemble performance coming to the Redcat Theater at LA's Disney Music Hall this November. Performers include Gary Chang, Alessandro Cortini of Nine Inch Nails, Richard Devine, Peter Grenader, Chas Smith and making a r
2007-05-12 by Bakis Sirros
AMG (All Music Guide) review: "It's a distinctly odd place, Parallel Worlds, a universe Bakis Sirros has been building up over a series of intriguing albums. Obsessive Surrealism is his Worlds' fourth, and once again we are invited into the dark recesses, but of what and where pr
2007-05-08 by alex banks
Hey Pete, I did that, had Doepher stuff with my AS system. After a while I just didn't like the "feel" of the Doepher modules so I sold 'em. 'been happy as Larry with all the AS gear. I use a modified 8000 to do everything from make sounds to shape other sounds. You're gonna love
2007-05-08 by Peter Marshall
Hi credo99muro, I'm not sure if you're supposed to get the Integrator wet, might be a little dangerous!! ;) Thanks for your comments, I take it you prefer the sound of the RS modules? I've come to opinion that mixing and matching modules from various manufacturers is the way for
2007-05-08 by credo99muro
Hello, Pete !! This is credo99muro from Japan. When I watched the modular synthesizer such as a "RS Integrator SYSTEM-1" at first, it looked like a control room of the Submarine. Listening to sound of the "RS Integrator SYSTEM-1", I were a Submariner. This is the reason why I pre
2007-05-06 by Doug Wellington
I just signed up for the AS list so that I can reply to it too. Been meaning to do that for a while. I don't have any AS modules myself but a local guy I know has quite a few.... > Thanks for the reply. I'm looking for that classic analogue sound in the > first instance but defin
2007-05-06 by Peter Marshall
Hi Doug, Thanks for the reply. I'm looking for that classic analogue sound in the first instance but definitely want to experiment, which is why I'm interested in taking modular route really, rather than simply buy a fixed synth. I'm a total novice when it comes to electronics th
2007-05-06 by Peter Marshall
Hello all, I'm new to the world of modular synthesis and am looking to buy my first system. After trawling through various web sites and reading numerous reviews it seems my best bet is either a Doepfer A-100 Basic system 2 or Analogue Systems RS Integrator system 3. These two sy
2007-04-21 by droog1968
Hi all New here, first browing at the photo's i really like what 'ooobeeone' has done with that Mini moog type modular thing with the joystick.Could 'ooobeeone'get intouch as your message facility does'nt work for me. Cheers
2007-04-19 by Thomas Garrison
Hello, Sorry but the Doepfer A-176 for sale, was supposed to say $60 including shipping. Please let me know. Take care, Thomas
2007-04-18 by Thomas Garrison
Hello, I have a few more modules still available for sale or trade. Please email me with your offers at garrgal@pacbell.net All of the modules are in excellent condition and work perfectly. The modules are below with prices and shipping is included to anywhere in the states. Emai
2007-04-18 by jneilnyc
Some impulse purchases have forced me to do a little shuffling of the arsenal. Accordingly, I might be putting my French Connection up on eBay soon. If you're interested send me some mail. More info here: http://www.analoguesystems.co.uk/pdf/FC2.pdf I don't have a price fixed yet
2007-04-12 by Thomas Garrison
Hello, Sorry I forgot to add the Doepfer A-107 to my for sale list. Thanks for your time. Take care, Thomas
2007-04-12 by Thomas Garrison
Hello, I have a few modules for sale and thought I would ask people here before selling them on Ebay. The modules are in excellent condition and work perfectly. The only small marks are underneath where the rack screws are. I will ship worldwide. Please emal me with your offers.
2007-03-18 by dirk frimout
hi, i'd like to buy the a.s. ems synthi filter. i would be using it in my system at home but also to filter tape live. can i supply power to this unit with batteries or a small adaptor? -i made a little wooden case with 3 9volt batteries for my paia ring modulator. a rack would m
2007-03-14 by mobiusproject
Hi guys, any one interested in my moogerfooger MurF Seri number nr.001 ?
2007-03-05 by keithw@cix.compulink.co.uk
In-Reply-To: I built two custom cabs for asys and one more in construction: http://home.freeuk.net/lowpass/cabinet.htm : : 0V : : +12V : : +5V : : -12V I used 16 pin (turned) DILs soldered to a stripboard with LEDs at the end cheers Keith http://home.freeuk.net/lowpass
2007-03-04 by wayne greenhaw
wish i could help not sure myself did check out your cabinet.... way cool....also heard some of your music nice stuff good luck wayne stuadh wrote: What I meant was, which pins are +12V, which are -12V and which are Ground? Yours Aye Stuadh (PS, photos of my cabinet under constru
2007-03-04 by waynegreenhaw
someone needs to remind me not to respond to post when i am half asleep...... hell i was going to remind thes guy to order a power supply !!!!!
2007-03-04 by stuadh
What I meant was, which pins are +12V, which are -12V and which are Ground? Yours Aye Stuadh (PS, photos of my cabinet under construction are at http://www.stuadh.com/page4.htm along with my music) --- In analogue_systems@yahoogroups.com, wayne greenhaw wrote: > > homade cab soun
2007-03-04 by wayne greenhaw
homade cab sounds cool thinking of doing that myself when are you going to want to order stuadh wrote: Hi, I'm wiring up my home-made cabinet and I'd appreciate someone reminding me of the order of A Sys power connections using 16 pin sockets). Yours Aye Stuadh ------------------
2007-03-04 by stuadh
Hi, I'm wiring up my home-made cabinet and I'd appreciate someone reminding me of the order of A Sys power connections using 16 pin sockets). Yours Aye Stuadh
2007-02-28 by Bakis Sirros
hello all, check out the main/news page of the Synth Music Direct website (www.synthmusicdirect.com) for comments on my new cd album. here are their comments: "Parallel Worlds / Obsessive Surrealism An amazingly inventive rhythmic / melodic release that sounds quite like nothing
2007-02-22 by Bakis Sirros
hello all, Press Release info follows: DiN26 - Obsessive Surrealism by Parallel Worlds The New Album is NOW Available to BUY from the DiN store ($18.00 Including Worldwide Postage) here: http://www.din.org.uk/shop.html Release date 5th March 2007 Parallel Worlds is the main proje