Yahoo Groups archive
Messages
Page 319 of 564 · 28179 messages matched
2007-02-15 by hardware@doepfer.de
> i am sorry about being a newbie but what email address is > (keyboards@...)? is that keyboards@doepfer.com? The address is keyboards@doepfer.de. Best wishes Dieter Doepfer
2007-02-15 by hardware@doepfer.de
> hi everyone- > thanks for the replies. i think if the current available in the > beauty case can accomodate an a110 plus a few other modules etc, then > that would work fine. i'm very pleased by the thought of having a > little station to swap out mini-patches for live use. > >
2007-02-15 by Silas Johansen
doepfer.de The archives of Yahoo groups removes domain names from email addresses, probably to prevent spammers from harvesting them. If you get the individual mails sent directly to your own email address other email addresses comes through just fine. On 2/14/07, spockjenkins wr
2007-02-14 by unknown freak
http://www.doepfer.de/a100z_e.htm A-100AD5 5V Low-Cost Adapter +5V@100 mA plug-in module; instead of a separate +5V power supply, this module can be plugged into a free socket on the bus board; for modules which require +5V (e.g. A-113, 190, 191), the current is taken from the 12
2007-02-14 by unknown freak
That's a 5V converter, which would only be needed in a row housing a module that required 5V. --Chuck > -----Original Message----- > From: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of spockjenkins > Sent: Wednesday, February 14, 2007 3:57 PM >
2007-02-14 by spockjenkins
thanks chuck! n
2007-02-14 by spockjenkins
i am sorry about being a newbie but what email address is (keyboards@...)? is that keyboards@doepfer.com? also i have two 6HU frames. one has a black heat sink looking thingamajig pluged in the first slot on the top bus. the other one doesn't. what is this thingamajig and why doe
2007-02-14 by thomasborax
hi everyone- thanks for the replies. i think if the current available in the beauty case can accomodate an a110 plus a few other modules etc, then that would work fine. i'm very pleased by the thought of having a little station to swap out mini-patches for live use. additionally,
2007-02-14 by doctorvague
Dieter Thanks very much for the info! That might be slightly beyond my expertise but may try it as it would be quite useful. I might just buy another 154 for the second sequencer and then could use them independently OR mult the clock and resets together and use them together tha
2007-02-14 by hardware@doepfer.de
> hi there folks. > > this may be a dieter only query, but i'll address it to the group in > case there are any suggestions. > > i was immediately interested in the a100 "beauty case" when i saw it > posted on the doepfer webpage. however i have a question about the > power suppl
2007-02-14 by hardware@doepfer.de
> I've got two A-155's and one A-154 driving them both. About half > the time I'd like to be able > to run them independently, mostly to send #2 a slower divided > clock to control longer- > running musical modulations. Is there any way a switch could be > added to #2 (or A-154)
2007-02-14 by ilanode
Hello Thomas, If DIY is fine for you, Tom (Analogue Sol.) offers what you need in the bay: http://search.ebay.de/_W0QQsassZhazchem88QQhtZ-1 As stated in a previous post Doepfer has announced a DIY Kit 2. See D.'s HP -> News --- In Doepfer_a100@yahoogroups.com, "thomasborax" wrote
2007-02-13 by travesty14850
I believe a new miniature power supply and bus board is coming out, for use with DIY projects...I'm waiting for it myself. > > hi there folks. > > this may be a dieter only query, but i'll address it to the group in > case there are any suggestions. > > i was immediately interest
2007-02-13 by thomasborax
hi there folks. this may be a dieter only query, but i'll address it to the group in case there are any suggestions. i was immediately interested in the a100 "beauty case" when i saw it posted on the doepfer webpage. however i have a question about the power supply. i've noticed
2007-02-13 by doctorvague
I've got two A-155's and one A-154 driving them both. About half the time I'd like to be able to run them independently, mostly to send #2 a slower divided clock to control longer- running musical modulations. Is there any way a switch could be added to #2 (or A-154) to be able t
2007-02-12 by clusters_movie
--- In Doepfer_a100@yahoogroups.com, wrote: > > > i joint the module A-144 with A-135 and A-108 with A-135 as > > manual's instruction, and i used VCO from another G6 and feedback > > from random, same another G6, i ask if is possible the power > > supply of module A-144,A-135,A-
2007-02-12 by travesty14850
Thanks, Dieter, I'll do that! > > > So all of a sudden, when I turn on my system, the A-190 will only > > convert gate, not CV. I get the same low note every time no matter > > what key I press on my M-Audio Axiom. CV only works when I do a > > partial reset--switch off, then bac
2007-02-12 by hardware@doepfer.de
> so i am having some problems with my a100 system and it started > all of sudden. it seems > that my a190 module is sending out continuos gate and clock > signal and every light on the > a190 is lit up. i have tried power cycling the system, > disconnecting it from the buss. any
2007-02-12 by hardware@doepfer.de
> So all of a sudden, when I turn on my system, the A-190 will only > convert gate, not CV. I get the same low note every time no matter > what key I press on my M-Audio Axiom. CV only works when I do a > partial reset--switch off, then back on with MENU pressed. > > Any ideas? P
2007-02-12 by hardware@doepfer.de
> i joint the module A-144 with A-135 and A-108 with A-135 as > manual's instruction, and i used VCO from another G6 and feedback > from random, same another G6, i ask if is possible the power > supply of module A-144,A-135,A-108, crashed? or what's happened? > thank in advance >
2007-02-12 by Florian Anwander
Hi nathan > that my a190 module is sending out continuos gate and clock signal and every light on the > a190 is lit up. If you have a voltmeter try to check the 5 volts supply. Florian
2007-02-12 by spockjenkins
so i am having some problems with my a100 system and it started all of sudden. it seems that my a190 module is sending out continuos gate and clock signal and every light on the a190 is lit up. i have tried power cycling the system, disconnecting it from the buss. any ideas? any
2007-02-11 by jeswa
--- In Doepfer_a100@yahoogroups.com, Antonio Grazioli wrote: > > I have built some DIY Multiples that fit in the original doepfer case > > look here: http://www.autodafe.net/doepfer/DSCN4225.JPG > > as you can see I also added a small mod to the "usual" multiple... > a switch in
2007-02-11 by robert cavadini
i joint the module A-144 with A-135 and A-108 with A-135 as manual's instruction, and i used VCO from another G6 and feedback from random, same another G6, i ask if is possible the power supply of module A-144,A-135,A-108, crashed? or what's happened? thank in advance Robert ----
2007-02-11 by Antonio Grazioli
hi, i have found the 3,5mm inputs here locally, the brand is "Cliff" (like the original ones used on the A100) I am sorry but I cannot help you about finding them on the net, but I am pretty sure that most of onlne electronic retailers have them ... [Non-text portions of this mes
2007-02-11 by stuadh
Hi, you'll need some of this (16 strand): http://www.maplin.co.uk/Search.aspx?criteria=XR73Q&DOY=11m2 some of these (2 x 8): http://www.maplin.co.uk/Search.aspx?criteria=FG44X&DOY=11m2 and these (2 x 8): http://www.maplin.co.uk/Module.aspx?TabID=1&DOY=11m2&ModuleNo=32803&criteria
2007-02-10 by bty205236
I'm thinking about trying some DIY work for my modular, but I've run into a little problem. Does anyone know what sort of connector the doepfer power connector is? Cheers, -a.
2007-02-10 by stuadh
These guys were helpful and good value... http://www.electronelec.co.uk/acatalog/Electron_Electronics_3_5mm_jack_plugs_and_sockets_195.html Also, about a third of the price of Maplin, try Rapid... http://www.rapidonline.com/home.aspx Yours Aye Stuadh --- In Doepfer_a100@yahoogrou
2007-02-10 by andre goncalves
Where do you buy your PCB input sockets? > I have built some DIY Multiples that fit in the original doepfer case > > look here: http://www.autodafe.net/doepfer/DSCN4225.JPG > > as you can see I also added a small mod to the "usual" multiple... > a switch in the middle to change b
2007-02-10 by Antonio Grazioli
I have built some DIY Multiples that fit in the original doepfer case look here: http://www.autodafe.net/doepfer/DSCN4225.JPG as you can see I also added a small mod to the "usual" multiple... a switch in the middle to change behaviour between 1x8 or 2x4 multiple. connections are
2007-02-10 by travesty14850
So all of a sudden, when I turn on my system, the A-190 will only convert gate, not CV. I get the same low note every time no matter what key I press on my M-Audio Axiom. CV only works when I do a partial reset--switch off, then back on with MENU pressed. Any ideas?
2007-02-09 by stuadh
Building a multiple is as simple as soldering all the jacks together. You don't need to earth it. There will be signal loss relative to the physical length of your multiple (probably very small) but also for every CV in you try to drive with it. I can't fathom the maths behind th
2007-02-09 by damaged_meat
--- In Doepfer_a100@yahoogroups.com, wrote: > > Max, > > you find my comments written inline. > > Best wishes > Dieter Doepfer > That's strange. From the factory only A-188-1 modules without BBD circuits > are delivered without filled circles at the front panel. Where did you > p
2007-02-09 by Sylvain Delisle
I'd wish to built an outboard "multiples" box. I need more multiples (A-180 style), but my case space is already all occupied. If I'm building a box inside wich I install a few 1/8" jacks and linked them pin-to-pin... I should expect the same result as a A-180, right? Is there a
2007-02-09 by amthewalrus
Hi Group, If anyone would like to sell their Doepfer Frequency Shifter or Phaser (either model) please contact me. I have some stuff to trade or cash. I'm located in the USA (Los Angeles). Thanks
2007-02-09 by thomas h
hi paul, i think someone beat you to it...sorry in case the deal falls through, i'll be in touch thanks for your interest! thomas --- Paul Schmidt wrote: > > Hi Thomas, > > > > I would like to buy your Analogue Solutions > AS0084 > > 84HP Minimodular Case for $50 > > Do you accep
2007-02-09 by Florian Anwander
Hi tonko > Am I missing something or the speed of software ADSR signal coming from Doepfer > MCV24 cannot be compared to the ultrafast signal from a-140 ADSR module? Im in love > with that beautiful click it can produce but I cannot get the same results with MCV24 > ADSR. > Is th
2007-02-09 by tonoknot
Hi to all mailinglist members. Am I missing something or the speed of software ADSR signal coming from Doepfer MCV24 cannot be compared to the ultrafast signal from a-140 ADSR module? Im in love with that beautiful click it can produce but I cannot get the same results with MCV24
2007-02-08 by bellenger_a
Just... Max I have no idea about yr A1888-1... but just coming to say "bonjour"... I dont know if there are many french on this list... but at least now I'm sure I'm not alone anymore.... Best, Alexandre --- In Doepfer_a100@yahoogroups.com, wrote: > > Max, > > you find my comment
2007-02-08 by Jay
hardware@doepfer.de wrote: > The only idea I still have is a poor or broken contact of the clock input > socket. Otherwise you have to send back the module for repair. And be sure > (though I already mentioned that) that the module is not in the CV > controlled mode. In this case
2007-02-08 by Paul Schmidt
> Hi Thomas, > > I would like to buy your Analogue Solutions AS0084 > 84HP Minimodular Case for $50 > Do you accept Paypal? If you do I can pay ASAP > > Shipping would be to: > Paul Schmidt > 4997 Mirror Lite Ct. > Shallotte, NC 28470 > > wrote: > > > > Hello everyone, > > I have
2007-02-08 by thomas h
Hello everyone, I have the following Doepfer A-100 modules as well as two cases for sale. These are generally less than a year old and all look and work like new. No worn lettering, no wear on the control panels, clean contacts and potentiometers. I can send pictures on request.
2007-02-08 by Ross Goniakowski
thanks for your reply... so i assume i would need an A176 or similar to tune fifths, etc? perhaps sending an interval to a s&h to bias the voltage would work also? ----- Original Message ---- From: "hardware@doepfer.de" To: Doepfer_a100@yahoogroups.com Sent: Thursday, February 8,
2007-02-08 by hardware@doepfer.de
> what is the range of the fine tune adjust knob supposed to be? For older A-110 it's about +/- 1/2 octave, for newer ones about +/- 1 semitone. We reduced the range many years ago (I don't remember the exact date) as customers recommended that for better fine tuning. But the ran
2007-02-08 by hardware@doepfer.de
Max, you find my comments written inline. Best wishes Dieter Doepfer > Hi all, I'm Max from France and this is my first message to the Doepfer group. > I got my A100 today and it is even more interesting than i expected, i'm really happy. > > However, i have problems with the A-1
2007-02-07 by damaged_meat
Hi all, I'm Max from France and this is my first message to the Doepfer group. I got my A100 today and it is even more interesting than i expected, i'm really happy. However, i have problems with the A-188-1 module that looks strange to me for two reasons : The first thing wrong
2007-02-07 by deejayy_svenn
Hallo Where can I find Wavetables suitable to load in this module ? Greetings DJS
2007-02-07 by Ross Goniakowski
what is the range of the fine tune adjust knob supposed to be? [Non-text portions of this message have been removed]
2007-02-06 by boxingmanager
It's with great regret that I'm forced to sell my Doepfer set up. It has the standard list of module plus a number of more esoteric items. A fuller description is available at http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150087527761 Many thanks. Alex Deacon
2007-02-05 by hardware@doepfer.de
> > Does the LED of the internal clock oscillator of the A-154 > display a clock > > signal. Try this settings: clock ~ 7, PW ~ 5, with first stop > control = 0, > > last step control = 10, mode = 0 (forward). And pay attention > to the correct > > position of the master switch (