Yahoo Groups archive
Messages
Page 322 of 564 · 28179 messages matched
2007-01-14 by James Husted
Someone on this list posted pictures of the top and bottom panels modified with multiples and more added. I think that it is a great idea. Always useful no matter what modules are placed under them. Another idea would be recreating an A-185 buss access module in that space. One c
2007-01-13 by dr_boehm_lebt
Hello, I' ve got a question about transposing sequences with my Doepfer Mini Basis system. The sequencer A-155 with one multiple A-180 is also in the system. I'd like to add the pitch CV from the sequencer A-155 to the pitch CV from the keyboard (via MIDI-to-CV-module A-190), so
2007-01-13 by selfoscillate
i agree about the reset input, that would be so cool. best wishes ingo --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > hello denis, > i think your suggestions about a sync input and the > switches are cool. > dieter? > > best regards, > Bakis. > > > --- "Denis Gökdag
2007-01-13 by Denis Gökdag
a little over 8 seconds, so something like 0.125 Hz ( i recorded white noise through a VCA being controlled by the first section of an a-143-1 set to LFO mode with both time constants at their max value, then selected one peak-to-peak cycle in the sample editor of logic pro.....t
2007-01-13 by Bakis Sirros
hello denis, i think your suggestions about a sync input and the switches are cool. dieter? best regards, Bakis. --- "Denis Gökdag" wrote: > Hi List, > > having another look at the quadrature LFO and the > cool looking companion quad VCA i stumbled upon one > feature that i miss
2007-01-13 by neil jendon
anybody? --- neil jendon wrote: > Hi all, > > What's the longest cycle possible on the A-143 for > each section when set to LFO mode? > > Thanks, > neil > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam > protec
2007-01-13 by stuadh
Dieter, is it possible to buy a single, bare PCB from an A151 Sequential Switch for inclusion in a home made Sequencer? Yours Aye Stuadh
2007-01-13 by stuadh
Hi, have made duophonic patches using the Kenton Pro-2000. To do this, I use the two separate channels, one set to respond to the highest note, one to the lowest. Then, you treat each channel as a separate but identical patch; each with its own oscillators, EGs filters VCas and a
2007-01-13 by Denis Gökdag
Hi List, having another look at the quadrature LFO and the cool looking companion quad VCA i stumbled upon one feature that i miss in the current design of the quadrature LFO: a reset/sync input for the quadrature LFO. I believe that this is a simple yet very important feature fo
2007-01-13 by travesty14850
I was playing around with the Oddity softsynth the other day and got thinking--I've got more than enough oscillators on my modular (4) to make some amazing duophonic sounds. How would I go about this? I've got the basic Doepfer MIDI-CV converter and an M-Audio Axiom controller...
2007-01-13 by Tim Stinchcombe
Hi Stuadh, Rapid Electronics: http://www.rapidonline.com/home.aspx order code 20-0140, but it looks like they may be temporarily out of stock! (There's always something...) Tim --- In Doepfer_a100@yahoogroups.com, "stuadh" wrote: > > Does anyone know where to buy sockets in the U
2007-01-12 by amnesia
I have been thinking about the very same thing but no idea how to go about it jeswa wrote: > > i'm wondering if anyone has experimented with either of these two > suitcase modification ideas: > > 1. cutting into the plastic top and bottom margins and installing > multiples or oth
2007-01-12 by stuadh
Does anyone know where to buy sockets in the UK or online? Maplin, Farnell and RS no longer stock them. I need about 40 for a couple of projects. Yours Aye Stuadh
2007-01-12 by jeswa
i'm wondering if anyone has experimented with either of these two suitcase modification ideas: 1. cutting into the plastic top and bottom margins and installing multiples or other modules (flush, not surface mounted). 2. turning two suitcases into one clamshell case. i don't know
2007-01-12 by jeswa
i'm wondering if anyone has experimented with either of these two suitcase modification ideas: 1. cutting into the plastic top and bottom margins and installing multiples or other modules (flush, not surface mounted). 2. turning two suitcases into one clamshell case. i don't know
2007-01-12 by Adam-V
Don't mind me, I'm getting dyslexic in my old age. I could have sworn It said 143-1 when I read it. Let us never speak of this again. --- In Doepfer_a100@yahoogroups.com, "ilanode" wrote: > > The A143-3 is the Quad LFO.
2007-01-12 by thomas h
Hello everyone, I have the following Doepfer A-100 modules as well as two cases for sale. These are generally less than a year old and all look and work like new. No worn lettering, no wear on the control panels, clean contacts and potentiometers. I can send pictures on request.
2007-01-12 by ilanode
--- In Doepfer_a100@yahoogroups.com, "Adam-V" wrote: > > Hi Macko, > > You have chosen a good selection of useful modules to add to your > system. The A-155 is a good little sequencer however you will to add > an LFO to your set up unless you wish to clock it from one of your > V
2007-01-12 by Adam-V
Hi Macko, You have chosen a good selection of useful modules to add to your system. The A-155 is a good little sequencer however you will to add an LFO to your set up unless you wish to clock it from one of your VCO's, manual step button or some another external clock source. Che
2007-01-11 by Maciej Wołowicz
hello im thinking about expansion of my small a100 system. i've already owned 2xa110, a121, a130, a140, a143-3. i would like to buy now: a117, a118, a138a, a155, a180. i would like to hear what do you think about such expansion - does it makes sense in your opinion? i've always w
2007-01-11 by James Husted
I have made the lower half of one of my portable cases into a controller only section. I have a joystick (a AS unit bought before Doepfer offered one) a custom panel with large pushbutton switches providing manual gates, some LFOs and envelope generators and some switch panels. B
2007-01-11 by neil jendon
Hi all, What's the longest cycle possible on the A-143 for each section when set to LFO mode? Thanks, neil __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
2007-01-11 by ilanode
Hello list! To finance some other gear I've to part with some Doepfer modules. I'm located in Germany and can *not* receive money via Paypal, sorry. Pls, contact me off list. Thanks for bandwith, Ingo A120 VCF modified; A122 VCF, A138 Mixer lin; A141 VC ADSR; A145 LFO; A118 Dig N
2007-01-11 by ilanode
TEST PLS IGNORE
2007-01-11 by Florian Anwander
Hi amnesia > is there a Doepfer Light Cintroller CV? A-179 Florian
2007-01-11 by amnesia
is there a Doepfer Light Cintroller CV? Florian Anwander wrote: > > cray5656 wrote: > > > i am thinking about making a separate 19" box with a joystick either > > end, but not sure what else to put in there...i dont need vcos /a's > > etc just controllers........any ideas? > > de
2007-01-11 by Florian Anwander
cray5656 wrote: > i am thinking about making a separate 19" box with a joystick either > end, but not sure what else to put in there...i dont need vcos /a's > etc just controllers........any ideas? depends on the content of your purse ;-) 2 Joysticks (one autocentered, one withou
2007-01-11 by cray5656
i am thinking about making a separate 19" box with a joystick either end, but not sure what else to put in there...i dont need vcos /a's etc just controllers........any ideas?
2007-01-09 by doepfer
Ahhh, I see...but then a regular VCO wouldn't fit, correct? So I would need to build my own housing if I wanted to use the A-110... Right. We are about to prepare some products that will ease DIY projects and keep the prices as low as possible, e.g. a power supply with external t
2007-01-09 by hardware@doepfer.de
It contains an A-143-9 (VC quadrature LFO/VCO) as sine VCO. Details on the Theremin page http://www.doepfer.de/a178.htm Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von travest
2007-01-09 by travesty14850
Ahhh, I see...but then a regular VCO wouldn't fit, correct? So I would need to build my own housing if I wanted to use the A-110... OK, thanks Dieter... JRL > > It contains an A-143-9 (VC quadrature LFO/VCO) as sine VCO. Details on the > Theremin page http://www.doepfer.de/a178.h
2007-01-09 by travesty14850
So...the Doepfer web site depicts a little mini-theremin built into the new mini-case. But when you look closely at it, it doesn't contain an oscillator. I'd love to make something like this, but...can you actually fit a complete, independent working theremin into this case? Ther
2007-01-09 by dhwestling
What happened to that cool metal keyboard Doepfer was in the final stages of developing about 9 months ago? I thought the basic design looked great, and it seemed to fit well with the A-100 system capabilities.
2007-01-08 by Bakis Sirros
hello florian, it is an old track so i cannot be sure, but, guessing: back then i was using a behringer composer as an overal mix compressor. also, i used a paia compressor (built from a paia kit, back in 1994, by my uncle who is an electronics tech) for specific sounds like bass
2007-01-08 by hardware@doepfer.de
Bryan, we have ordered the front panels in December and I hope we will obtain the first batch end of January. To keep the price as low as possible the front panel will be without printing. No BNC adapter is necessary as the right four 3.5 mm sockets of the A-180 mounted on bottom
2007-01-08 by hardware@doepfer.de
Alexandre, I think the solution for this problem was discussed alread earlier in the group. The reason for the malfunction are the AC coupling capacitors at the A-111 outputs. They cause problems in combination with A-117 (noise clock input) or A-163. The simplest solution is to
2007-01-08 by hardware@doepfer.de
If you tell me you email address I can send you a suitable pdf file. Best wishes Dieter Doepfer (back from holidays) > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von regimental1200 > Gesendet: Donnerstag, 28. Dezember 2006 01:09 > An: Doep
2007-01-08 by Bakis Sirros
hello Dieter, Happy New Year! of course i agree! many thanks, best regards, :-) Bakis. --- hardware@doepfer.de wrote: > Hello Bakis, > > we are back from holidays. If you agree I will add a > link to your video on > our website. > > All the best for 2007 > Dieter Doepfer > Doepfe
2007-01-08 by Florian Anwander
Hi Bakis > www.parallel-worlds-music.com/web_releases.htm I listened to some of your mp3s and now I am wondering, what compression do you use for your sum. E.g. in "The Wind Over The Waves", there is a regular bass note (assumingly doubled with a bass drum) which sounds cool and
2007-01-08 by hardware@doepfer.de
Hello Bakis, we are back from holidays. If you agree I will add a link to your video on our website. All the best for 2007 Dieter Doepfer Doepfer Musikelektronik GmbH Email address: hardware@doepfer.de Web Site: www.doepfer.com -----Ursprüngliche Nachricht----- Von: Doepfer_a100@
2007-01-06 by Cynthia Webster
Aleatoric BUG MUSIC Competition UPDATE Howdy! So as not to constantly bombard this list with comments and minor updates, please sign-up to our Yahoo Group The Cyndustries List http://launch.groups.yahoo.com/group/The_Cyndustries_List/ First I would like to thank everyone who has
2007-01-05 by Antonio Tuzzi
Ok my fault Dieter was right: I was overriding the resonance with an high input value the problem is that I override the resonance when the LP input value is bigger than 1-1.5. is this a correct value ? Or I need a calibration? thank you for your help at On 12/21/06, hardware@doe
2007-01-05 by Soy Sos
Happy new year all. Here's a nice feature article featuring myself and my studio Tuff Sound Recording. Looking forward to more interesting projects this year. Herman/Soy Sos 412.371.4878 studio 412.608.5152 mobile http://tuffsoundrecording.com http://somamestizo.com 3 Generations
2007-01-05 by surachai sutthisasanakul
im just writing about my experience traveling with this thing. i flew out of washington d.c., with the expected problems. they had no idea what it was and tested it for hazardous material. a helpful hint i received earlier was to have a pair of headphones/power cable to test it o
2007-01-04 by Bryan E Cornell
Anybody know when this is slated for release? I got my Velleman Panel Scope yesterday and can hardly wait to mount it? By the way is there a BNC *-> 1/8 " adapter on the market, or does one have to make these? Thanks, Bryan
2007-01-04 by michaeltritter
If you do find that the fuse is blown and you replace it with a 500mA that blows again, you're having the same problem I did a few months back. Dieter suggested going to a higher value fuse, 630mA or as high as 750mA slow blow. When I went to 750mA slow blow all my problems went
2007-01-03 by Hans Greuber
Hi; Then.. buy my G6 case.. Hans >From: Florian Anwander >Reply-To: Doepfer_a100@yahoogroups.com >To: Doepfer_a100@yahoogroups.com >Subject: Re: [Doepfer_a100] G6 Cases >Date: Tue, 02 Jan 2007 18:02:42 +0100 > >Hi dr_synthatron > > > has done the same. It seems to have totally di
2007-01-02 by chad_kettering
Hello, I am selling many modules in frac rack and eurorack format on eBay. Look under my user name: soniclayers Thanks, Chad
2007-01-02 by Florian Anwander
Hi dr_synthatron > has done the same. It seems to have totally died on me. Anyone know if > there is a known fault with these cases? I've never had a problem with > my old one. Did you check the fuses? Florian.
2007-01-02 by dr_synthatron
Thanks Florian, I'll check it out now.