Yahoo Groups archive
Messages
Page 480 of 564 · 28179 messages matched
2003-06-02 by davevosh@aol.com
In a message dated 6/2/2003 1:36:48 PM Eastern Daylight Time, r.steverink@wanadoo.nl writes: > I noticed that you use a lot of filters. What kind > of music are you making with your gear? > > roel, actually more by accident than design. :^) i started with the 2 vcf`s in the bs1 w
2003-06-02 by davevosh@aol.com
In a message dated 6/2/2003 1:36:48 PM Eastern Daylight Time, r.steverink@wanadoo.nl writes: > What do you think of the triple vcf from MOTM. > And are you going to buy more MOTM? roel, the triple vcf from motm is a very nice module. it has a smooth sound of its own and makes a g
2003-06-02 by davevosh@aol.com
In a message dated 6/2/2003 1:36:48 PM Eastern Daylight Time, r.steverink@wanadoo.nl writes: > I read a lot of good comments of the Wiard stuff! > Only the look of it. I don't find the look too exciting. > roel, what can i say ? the circuitry is first rate ! the "look" of the 300
2003-06-02 by davevosh@aol.com
In a message dated 6/2/2003 1:36:48 PM Eastern Daylight Time, r.steverink@wanadoo.nl writes: > A new case! It's looking up > to a mountain. To spend so much money and > still don't have any modules yet!!! > roel, i know this feeling exactly ! when i bought frame #4, it only had a
2003-06-02 by Bakis Sirros
hi roel, so,it seems that the problem is in the case's bus board!as all the new modules have worked in your other(older) doepfer case,they seem to be ok! as far as i know from dieter,yes, a wrong connection to the bus board can lead to a blown fuse! but,also, check that your new
2003-06-02 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] Blown fuse again! > Date: Mon, 2 Jun 2003 20:33:32 +0200 > > > -----Urspr'ngliche Nachricht----- > > Von: Roel Steverink > [mailto:r.steverink@wanadoo.nl] > > Gesendet: Dienstag,
2003-06-02 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] A149-1 Question > Date: Mon, 2 Jun 2003 20:21:20 +0200 > > > -----Urspr'ngliche Nachricht----- > > Von: Bakis Sirros > [mailto:synth_freak_2000@yahoo.com] > > Gesendet: Mittwoch,
2003-06-02 by Tim Stinchcombe
Hi Roel, > I hope that the cause. I noticed that on one of > the connector's, the highest pins, where bent a > little to the outside. I remember having trouble > getting it connected! Now, this evening when I > checked I saw that this connection was indeed > not right and could e
2003-06-02 by boredom_cz
hey i am not sure that this applies 100% to the list, but i'll give it a shot. i am building a vcf module based on the ssm2044 like the planned (and apparently ready to go) doepfer a105 module. if anyone out there is a synth builder, would you happen to know if it is possible to
2003-06-02 by Tim Stinchcombe
Hi Roel, > Today I bought 2 fuses of T100ma. > As soon as I switched the case on, > the fuse blew!!! > To make sure it was not a bad fuse, > I tried the spare one and... > it acted the same way!!! > I tell you also what happened to > the 250ma fuse I tried. > This kept working, b
2003-06-02 by Mark Deal
Hi all, The following modules are for sale individually. a114 Dual ring mod, GBP 30 a116 VC Waveform Processor, GBP 30 a121 Multimode Filter, GBP 46 a145 LFO, GBP 26 a146 LFO, GBP 30 a160 Clock Divider, GBP 23 2xa180 Multiple, GBP 15 each a181 6.5/3.5 Multiple, GBP 16 I also have
2003-06-02 by Florian Anwander
Hi ph > seems like an affordable one would be nice? > with some CV ins? i'll site extreme ones like the Joe Meek SC2 or new EH > BF... no need for tubes. Aren't there some guitar foot stomper boxes that use vactrols for compression (boss CE2 ?). It should be quite simple to modif
2003-06-02 by David Salter
Tim, I would like some detail, not being that savvy in these things. regards David Salter Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax: +44 20 7542 2699 -----Original Message----- From: Tim Stinchcombe [mailto:timothy@tstinchcombe.freeserve.co.uk] Sent: 30 May 2003 19:52 To: Doe
2003-06-02 by selfoscillate
absolutely. they are much too expensive, it's ridiculous. best wishes ingo --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > sorry to dissapoint you guys, but the prices are > redicoulous!don't you agree? > bakis. > > > > --- klamb000 wrote: > > I know of two people that
2003-06-02 by selfoscillate
happy happy, joy joy !! :-) --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > hi list, > dieter told me that the first pre-ordered a105 SSM > filter modules will, probably, shipped during next > week. > bakis. > > > > ===== > synthfreak(parallel worlds) > athens-greece >
2003-06-01 by Roel Steverink
From: davevosh@a... Date: Sun Jun 1, 2003 1:01 pm Subject: synth pics Hi Dave, Nice pics, shame they're not entirely sharp! I see your filling up your fourth case! I just bought my third and have filled up with 4 modules so far. I see you also Wiard modules, are they working well
2003-06-01 by Roel Steverink
From: "Joe Buechler" Date: Sat May 31, 2003 5:00 pm Subject: Re: Blown fuse Thanks, Joe! Now I understand how to look in the archive, it works wonderfully well. By the way. The first case I brought back to Utrecht by train, cause I thought there was something seriously wrong. Aft
2003-06-01 by davevosh@aol.com
In a message dated 6/1/2003 9:26:29 AM Eastern Daylight Time, r.steverink@wanadoo.nl writes: > > Nice pics, shame they're not entirely sharp! > I see your filling up your fourth case! > I just bought my third and have filled up > with 4 modules so far. > I see you also Wiard modu
2003-06-01 by davevosh@aol.com
> Doepfer_a100@yahoogroups.com hello list, bakis was kind enough to post 2 pics of my modular to the "photo`s" section in a folder titled "dave`s stuff". while not nearly as impressive as some other set-up`s, i`m quite pleased with my synth, enjoy it greatly and would welcome any
2003-06-01 by Bakis Sirros
these too sould come first!!!!:-) bakis. --- klamb000 wrote: > And vactrol filters and phasers... > > Regards, > Kevin > > --- In Doepfer_a100@yahoogroups.com, "p. hendricks" > wrote: > > On 5/31/03 7:47 PM, "p. hendricks" > wrote: > > > > > seems like an affordable one would be
2003-06-01 by Bakis Sirros
of course!!! bakis. --- "p. hendricks" wrote: > On 5/31/03 7:47 PM, "p. hendricks" > wrote: > > > seems like an affordable one would be nice? > > with some CV ins? i'll site extreme ones like the > Joe Meek SC2 or new EH > > BF... no need for tubes. > > BTW: of course the SOU and
2003-06-01 by p. hendricks
On 5/31/03 7:47 PM, "p. hendricks" wrote: > seems like an affordable one would be nice? > with some CV ins? i'll site extreme ones like the Joe Meek SC2 or new EH > BF... no need for tubes. BTW: of course the SOU and A-154 shall come first! best, pH
2003-06-01 by p. hendricks
seems like an affordable one would be nice? with some CV ins? i'll site extreme ones like the Joe Meek SC2 or new EH BF... no need for tubes. -pH
2003-06-01 by klamb000
And vactrol filters and phasers... Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "p. hendricks" wrote: > On 5/31/03 7:47 PM, "p. hendricks" wrote: > > > seems like an affordable one would be nice? > > with some CV ins? i'll site extreme ones like the Joe Meek SC2 or new EH
2003-05-31 by Joe Buechler
Search on "Fuse" or read message #3773 Joe --- In Doepfer_a100@yahoogroups.com, "roelelec" wrote: > Hi list, > > I have now my third case with 4 new modules (A-110 2x, A-176, A-135), > but due to a overload, I'd blown the fuse of the case. > I'm no expert with fuses, what I like
2003-05-31 by roelelec
Hi list, I have now my third case with 4 new modules (A-110 2x, A-176, A-135), but due to a overload, I'd blown the fuse of the case. I'm no expert with fuses, what I like to know is, which fuse I need for a two rows case? How much mili-ampère? Thanks, Roel
2003-05-30 by Bakis Sirros
hi list, i have an a191 and use it very often!most of the times i use it for the midi cc to cv functions,but i have ,also, used it for it's shepard functions with 4 a125 vc-phaser modules for a shepard phaser effect. bakis. --- klamb000 wrote: > I agree Joe. One of the best featu
2003-05-30 by Tim Stinchcombe
Hi list, Having despaired last night at not being able to clock my A- 117 digital noise module with my A-111, this morning I took penknife and soldering iron to it. I have 'reconfigured' it, moving one of the Schmitt triggers from being after the internal clock but before the inp
2003-05-30 by klamb000
I agree Joe. One of the best features (at least in my weird opinion) is the MIDI synced LFO. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "Joe Buechler" wrote: > > Yeah, saw them myself a while back, and also thought "Crikey, > > expensive!". On the other hand, to generate
2003-05-30 by Joe Buechler
> Yeah, saw them myself a while back, and also thought "Crikey, > expensive!". On the other hand, to generate a Shepard tone with > Doepfer modules takes an A-191 and 8 VCOs and VCAs, which with 110s > and 132s comes to grand total of around $1130! You know, in some ways it's alm
2003-05-30 by Andrew Ison
I may have to pick up one of theses orphan modules. ----- Original Message ----- From: klamb000 To: Doepfer_a100@yahoogroups.com Sent: Friday, May 30, 2003 5:56 PM Subject: [Doepfer_a100] Re: A191 (Buchla Barber Pole modules) I agree Joe. One of the best features (at least in my
2003-05-29 by Bakis Sirros
hi tim, oops,yes, i meant 80% of the components price. bakis. --- Tim Stinchcombe wrote: > Hi Joe, Bakis, > > > Timothy, I'm nitpicking, but you forgot to include > the price of a > > pair of A138s to mix down the 8 VCA outputs. > > Yeah I know - I thought that was being just a l
2003-05-29 by klamb000
In the spirit of random behavior, I've put an MP3 sample and a JPG of a patch. http://groups.yahoo.com/group/Doepfer_a100/files/Pseudo%20Random% 20Patch/ Once again, not a lot of science, but a hell of a lot of fun... at least, for me it was. Regards, Kevin
2003-05-29 by Tim Stinchcombe
Hi Joe, Bakis, > Timothy, I'm nitpicking, but you forgot to include the price of a > pair of A138s to mix down the 8 VCA outputs. Yeah I know - I thought that was being just a little _too_ prissy! Besides as I was adding it all up... > > they are STILL TOO expensive,(the buchla m
2003-05-29 by Bakis Sirros
hi tim, they are STILL TOO expensive,(the buchla modules), as, for $1130 ,you get a doepfer a191(midi-cv plus shepard gen.)and 8 vca's and 8 a110's with a million more inputs, outputs and knobs!doepfer told me that the 80% of a module's price goes to the knobs and jacks and poten
2003-05-29 by yasi p
various replies to this thread: -------------------------------------------------------------------------------------------- >Does anybody know where to get the colored knobs? they are made by rogan. discontinued, so you have to custom order them these days. >two people that have
2003-05-29 by Joe Buechler
Timothy, I'm nitpicking, but you forgot to include the price of a pair of A138s to mix down the 8 VCA outputs. Joe --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > hi tim, > they are STILL TOO expensive,(the buchla modules), as, > for $1130 ,you get a doepfer a191(midi-
2003-05-29 by Andreas Lindholm
Right if there was a meter module no LEDs would be needed here. I second that so I vote against any LEDs just to propagate for a meter module. ----- Original Message ----- From: "Joe Buechler" To: Sent: Thursday, May 29, 2003 3:42 PM Subject: [Doepfer_a100] Re: Reading knobs prob
2003-05-29 by Joe Buechler
Hi Andreas > I rather just have the final result than the final effect shown > cause it it the actual output signal that we are going to feed to > other modules and no the factor, right? If we had a meter module, this discussion wouldn't even be necessary! It seems to me that whi
2003-05-29 by Tim Stinchcombe
> has anybody recognised that module 297 (infinite phase shifter) and 260 > (duophonic pitch class generator) will be available from Buchla soon? > There will be only a limited number. Price is $1500 for the 297 and > $1250 for the 260. Expensive.... :-( Yeah, saw them myself a w
2003-05-29 by klamb000
Disappointed? Not me. I don't think they're just too expensive... they're WAY too expensuve. I mean, if anyone sees me spending $1200 on a phase shift filter, please take my credit cards away because I've lost my mind. I was simply mentioning that they also seem to mostly arrive
2003-05-29 by Andreas Lindholm
If that is indeed the way it is intended it is slightly more useful, but I rather just have the final result than the final effect shown cause it it the actual output signal that we are going to feed to other modules and no the factor, right? /Andreas As for setting my date to th
2003-05-29 by Andreas Lindholm
It sure sounds good... I hope ;) ----- Original Message ----- From: "klamb000" To: Sent: Wednesday, May 28, 2003 8:06 PM Subject: [Doepfer_a100] Re: new A149-1 SOU,A172 MIN/MAX,A133 VC POLARIZER MODULES PAGES!!!!!! > Then you really do live in the future. Tell me then, what does
2003-05-29 by Bakis Sirros
sorry to dissapoint you guys, but the prices are redicoulous!don't you agree? bakis. --- klamb000 wrote: > I know of two people that have purchased Barber > Poles, and both have > complained loudly about the build quality (and I'm > just repeating > what two highly respected prof
2003-05-29 by Paul Schulz
hi list, has anybody recognised that module 297 (infinite phase shifter) and 260 (duophonic pitch class generator) will be available from Buchla soon? There will be only a limited number. Price is $1500 for the 297 and $1250 for the 260. Expensive.... :-( Gosh, Buchla´s faceplate
2003-05-29 by klamb000
I know of two people that have purchased Barber Poles, and both have complained loudly about the build quality (and I'm just repeating what two highly respected professionals have told me). I was told they used nylon pots (which were allegedly off center to the faceplate), and th
2003-05-28 by Bakis Sirros
hi andreas, the leds show the knob position PLUS the incoming cv!!!so,you get a reading of the "final" effect(amplification or attenuation,positive or negative),(caused by the knob AND the cv input),that the module has on your input signal. bakis. ps:about the clock problem...wha
2003-05-28 by Lucien RONDAY
Hello Mark, I am interested in: One A148 (S/H) Two A 178(Theremin) Thus the total must be 110 GBP Could you tell me the price for the shipping to Belgium ? I can pay by Paypal or from bank to bank. Best regards, Lucien Le mercredi, 28 mai 2003, à 17:02 Europe/Brussels, Mark Deal
2003-05-28 by Joe Buechler
Hi Andreas "Amplification can be adjusted manually (Man control) or by an external control voltage. The present amplification is displayed with two LEDs: one for positive and one for negative amplifications." So, the LEDs don't just reflect the knob position, they reflect the pol
2003-05-28 by klamb000
Then you really do live in the future. Tell me then, what does the A107 sound like? Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "Andreas Lindholm" wrote: > Sorry, but there must be some server error cause my date on this PC is > correct in my clock and in the mailprogram.