2018-11-15 by yahoo@doepfer.de
Hello, in the A-135-2 only the audio inputs can be normalled via jumpers. Because of the very compact design there was no space left on the pc board for the CV normalling jumpers. We discussed if we add the CV normalling features without jumpers (i.e. permanent normalling). But i
Thread view
Attachments: 0
2018-11-14 by exakoustidismiltiadis@hotmail.com
Hello, I would like to ask a question about the forthcoming A135-2! Are the CV inputs going to be normalled just as the signal inputs? I ask this because in A135-1 both CV and signal inputs are normalled.
Thread view
Attachments: 0
2018-10-31 by Jacco Ville
Thank you Dieter :-) Sent from my IPhone. Op 31 okt. 2018 om 09:46 heeft yahoo@doepfer.de [Doepfer_a100] het volgende geschreven: >> I would definitely have chosen slimmer versions of the modules I >> bought, so I could fit a few more into my case. I chose the >> A-111-3 over the
Thread view
Attachments: 0
2018-10-31 by yahoo@doepfer.de
> I would definitely have chosen slimmer versions of the modules I > bought, so I could fit a few more into my case. I chose the > A-111-3 over the A-110, for that reason. > > I noticed a couple of them could have had one or two HP shaved > off them, without changing the design m
Thread view
Attachments: 0
2018-10-31 by man.of.mystery@ntlworld.com
I would definitely have chosen slimmer versions of the modules I bought, so I could fit a few more into my case. I chose the A-111-3 over the A-110, for that reason. I noticed a couple of them could have had one or two HP shaved off them, without changing the design much, if at a
Thread view
Attachments: 0
2018-10-30 by rigo.schoeters@yahoo.com
Thank you for the confirmation, Dieter. And looking forward to the new modules. Rigo
Thread view
Attachments: 0
2018-10-30 by yahoo@doepfer.de
> Just a quick question about the "jumper for feedback insert" > mentioned in http://www.doepfer.de/a100_man/A101_6_Jumper.pdf ... > aren't those the exact same signals as on FB Out and FB In ? > I am looking to make a module with switches for the different > modes (separate swit
Thread view
Attachments: 0
2018-10-29 by rigo.schoeters@yahoo.com
Just a quick question about the "jumper for feedback insert" mentioned in http://www.doepfer.de/a100_man/A101_6_Jumper.pdf ... aren't those the exact same signals as on FB Out and FB In ? I am looking to make a module with switches for the different modes (separate switches for e
Thread view
Attachments: 0
2018-10-29 by yahoo@doepfer.de
> I have to say I’m not very interested in these new slimmed down > modules, although I understand from a commercial point that > Doepfer need to entice a new customer base. There were some very > cool modules that had been in the development stage such as the > Chos module that
Thread view
Attachments: 0
2018-10-28 by christian ienni
my point was i DID get the joke you were first making, because i enjoy similar humor. :-) On Sunday, October 28, 2018, 1:11:50 PM PDT, Diego Ragnini diegora@free.fr [Doepfer_a100] wrote: sorry, can’t get where your semantics is going to! Inviato da iPhone Il giorno 28 ott 2018, a
Thread view
Attachments: 0
2018-10-28 by Diego Ragnini
sorry, can’t get where your semantics is going to! Inviato da iPhone > Il giorno 28 ott 2018, alle ore 17:15, christian ienni ienni23@yahoo.com [Doepfer_a100] ha scritto: > > just to add another perspective (don't worry, it's just a 20 sec FamGuy clip)... > https://www.youtube.co
Thread view
Attachments: 0
2018-10-28 by christian ienni
just to add another perspective (don't worry, it's just a 20 sec FamGuy clip)... https://www.youtube.com/watch?v=IUlDQCXgyU4"Hey Famiy Guy! You're lucky I got a manicott in the oven, or I'd bash your face into a bolognese! That's TWO kinds of food!! THAT'S how angry I am!!!" (sor
Thread view
Attachments: 0
2018-10-27 by Diego Ragnini
Dorian... this is a genuine extra LOL ! The soft “z” is so precisely fitting the purpose of underlining stereotypes, I now perfectly remember my ‘80s in Cologne and Berlin.. Great time for lazy kiddy people like me! So I hope Mr Kellett will forgive me! Will you Mr Kellett? Invia
Thread view
Attachments: 0
2018-10-27 by Bakis Sirros
congrats on the new album Jonas! Bakis Sirros - Parallel Worlds | [Doepfer_a100] group owner | www. parallel - worlds - music. com | www. facebook. com/ parallelworldsmusic | https://dinrecords. bandcamp. com/ On Saturday, October 27, 2018, 6:58:30 PM GMT+3, Zyntetix zyntetix@gma
Thread view
Attachments: 0
2018-10-27 by Bakis Sirros
:-D Bakis Sirros - Parallel Worlds | [Doepfer_a100] group owner | www. parallel - worlds - music. com | www. facebook. com/ parallelworldsmusic | https://dinrecords. bandcamp. com/ On Saturday, October 27, 2018, 6:50:51 PM GMT+3, Florian Anwander fanwander@mnet-online.de [Doepfer
Thread view
Attachments: 0
2018-10-27 by Zyntetix
Hi fellow Doepfer users. My new album with Zyntetix - Infect Assimilate will be released on thursday the first of november on all streaming platforms. But you can already listen, buy and download it on bandcamp. https://zyntetix.bandcamp.com/album/infect-assimilate Infect Assimil
Thread view
Attachments: 0
2018-10-27 by Diego Ragnini
okay sorry... did I overwhelmed the boundaries...? I didn’t mean to hurt anybody, people could take words for what they are and they are not grenades, neither stones... come on, you see, I was just doing some kiddy humor about those stereotypes, I didn’t think that it could hurt
Thread view
Attachments: 0
2018-10-27 by Florian Anwander
Am 27.10.18 um 13:06 schrieb David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100]: That’s some pretty nasty stereotyping there Diego. Zough I am a German I can't answer on zis. I have no time, as I still have to cleann ze boardwalk, zen rehearse marching, and zen zere is stil
Thread view
Attachments: 0
2018-10-27 by Bakis Sirros
yes, you are right, most probably he was joking. :-) On Saturday, October 27, 2018, 2:21:56 PM GMT+3, Neil Kagan nkagan@mac.com [Doepfer_a100] wrote: I thought he was joking, I do hope so. Sent from my iPhone On 27 Oct 2018, at 12:19, Bakis Sirros synth_freak_2000@yahoo.com [Doep
Thread view
Attachments: 0
2018-10-27 by Neil Kagan
I thought he was joking, I do hope so. Sent from my iPhone > On 27 Oct 2018, at 12:19, Bakis Sirros synth_freak_2000@yahoo.com [Doepfer_a100] wrote: > > hi Diego, > > please, be a bit carefull, from now on, and do not accuse people from specific countries for specific characteris
Thread view
Attachments: 0
2018-10-27 by Bakis Sirros
hi Diego, please, be a bit carefull, from now on, and do not accuse people from specific countries for specific characteristics. each country has all types of people. and after all, all humans are citizens of planet earth and that's all that matters! thank you,best regards, :-) B
Thread view
Attachments: 0
2018-10-27 by David Kellett
That’s some pretty nasty stereotyping there Diego. David www.movingisliving.co.uk Sent from my iPhone > On 26 Oct 2018, at 18:01, Diego Ragnini diegora@free.fr [Doepfer_a100] wrote: > > I would do pretty the same lovely purchase choice, though there’s a plenty of random and uncer
Thread view
Attachments: 0
2018-10-26 by Diego Ragnini
I would do pretty the same lovely purchase choice, though there’s a plenty of random and uncertainty modules out there that Mr Doepfer likely did notice and.... you know... who would choose to produce some goods knowing that they will not be sold properly? It’s not a coincidence
Thread view
Attachments: 0
2018-10-26 by David Kellett
Me too Neil - I have three sets of A149-1 and A149-2s and I’d by three of each of the other modules too. Let’s hope!! D www.movingisliving.co.uk Sent from my iPhone > On 26 Oct 2018, at 16:48, Neil Kagan nkagan@mac.com [Doepfer_a100] wrote: > > My understanding is that the 149-3
Thread view
Attachments: 0
2018-10-26 by Neil Kagan
My understanding is that the 149-3 would be the chaos module and another would be based on the fluctuating random voltages missing from the 149-1. I haven’t got the funds for Buchla gear and doepfer quality is brilliant, so these would both be definite future purchases for me. Ne
Thread view
Attachments: 0
2018-10-26 by David Kellett
I agree with Neil - I’m not very interested in smaller versions of modules - my eyes and fingers have enough difficulty with “normal” size modules!! Are there to be any extensions to the A149? I know there were going to be but it’s been along time........ I suppose the Touch Plat
Thread view
Attachments: 0
2018-10-26 by Diego Ragnini
do not forget to resize hands and fingers as well ! Inviato da iPad > Il giorno 26 ott 2018, alle ore 12:01, Bakis Sirros synth_freak_2000@yahoo.com [Doepfer_a100] ha scritto: > > haha! true! > > Bakis Sirros - Parallel Worlds | [Doepfer_a100] group owner | www. parallel - worlds
Thread view
Attachments: 0
2018-10-26 by Bakis Sirros
haha! true! Bakis Sirros - Parallel Worlds | [Doepfer_a100] group owner | www. parallel - worlds - music. com | www. facebook. com/ parallelworldsmusic | https://dinrecords. bandcamp. com/ On Friday, October 26, 2018, 12:58:38 PM GMT+3, Richard Horsman richyho@virginmedia.com [Do
Thread view
Attachments: 0
2018-10-26 by Neil Kagan
I have to say I’m not very interested in these new slimmed down modules, although I understand from a commercial point that Doepfer need to entice a new customer base. There were some very cool modules that had been in the development stage such as the Chos module that have now b
Thread view
Attachments: 0
2018-10-26 by Richard Horsman
With modules getting smaller and smaller we will soon need more than 14 power headers on each busboard! Regards, Richard > > On 26 October 2018 at 08:46 "yahoo@doepfer.de [Doepfer_a100]" wrote: > > Hello, > > no news so far. We are about to develop some other new modules which se
Thread view
Attachments: 0
2018-10-26 by yahoo@doepfer.de
Hello, no news so far. We are about to develop some other new modules which seem to be more important than the A-126 redesign, especially modules with smaller front panels but the same functions as larger modules (e.g. 4HP versions of 8HP modules, like the A-140-2, A-142-1, A-111
Thread view
Attachments: 0
2018-10-26 by rigo.schoeters@yahoo.com
> I'm sorry - no news so far. It's still in the holding pattern ... How's the holding pattern doing ? And are there any updates about future modules ? The "A-100 Future Modules" page could do with a new update Rigo
Thread view
Attachments: 0
2018-10-09 by Bakis Sirros
Tone Science Module No.2 Elements and Particles is now available on CD / download from the DiN Bandcamp store. https://din.org.uk/album/tone-science-module-no-2-elements-and-particles-din-ts02 Contemporary Modular Synthesiser Compositions. Release date is October 19th 2018 Thank
Thread view
Attachments: 0
2018-09-28 by 9-0-9
Ok thanks for your update Dieter :) --- Greetings, 9-0-9 On 2018-09-28 11:39, yahoo@doepfer.de [Doepfer_a100] wrote: > Hello, > > I'm sorry - no news so far. It's still in the holding pattern ... > > Best wishes > Dieter Doepfer > > -----Ursprüngliche Nachricht----- > Von: Doepfe
Thread view
Attachments: 0
2018-09-28 by yahoo@doepfer.de
Hello, I'm sorry - no news so far. It's still in the holding pattern ... Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] > Gesendet: Freitag, 28. September 2018 10:39 > An: Doepfer_a100@yahoo
Thread view
Attachments: 0
2018-09-28 by 9-0-9
Hello Dieter, Is there any news on the new A-126-2 frequency shifter (combo) module? --- Greetings, 9-0-9 On 2017-06-08 09:44, Neil Kagan nkagan@mac.com [Doepfer_a100] wrote: > Understood! > > Thanks again, > > Neil > > Sent from my iPhone > >> On 8 Jun 2017, at 08:43, yahoo@doep
Thread view
Attachments: 0
2018-09-28 by yahoo@doepfer.de
To speak the truth the inquiries for this module are extremely poor. I cannot remember that during the last year someone was asking. That's why we decided not to continue the development. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogrou
Thread view
Attachments: 0
2018-09-27 by 2494axe@gmail.com
That's very good indeed then Dieter ! I'm really looking forward.
Thread view
Attachments: 0
2018-09-27 by Neil Kagan
I’m awaiting news of the Chaos module if that’s still in development? Neil Sent from my iPhone > On 27 Sep 2018, at 15:54, yahoo@doepfer.de [Doepfer_a100] wrote: > > Hello, > > indeed we are in contact with a few A-100 users about a new, smaller > noise/random module. We will tak
Thread view
Attachments: 0
2018-09-27 by yahoo@doepfer.de
Hello, indeed we are in contact with a few A-100 users about a new, smaller noise/random module. We will take your suggestions into account. But I think that most of them are already in our planning (integrated HSVCO for digital noise, digital and analog noise, random CV, S&H ...
Thread view
Attachments: 0
2018-09-26 by 2494axe@gmail.com
Hello, Now using a smaller system than the one I was used to, I am considering new modules that would combine different functions of already existing modules in order to save HP. I'm pointing that I'm now using only Doepfer modules. For example I think the A184-1 is one of those
Thread view
Attachments: 0
2018-09-24 by 2494axe@gmail.com
Hello, I've now made a patch to create an 8 step sequence using : A147 - as trigger source A160-161 A138a x 2 - to patch in the 8 outputs from the A161 A150-8 - to switch from the first A138 and the second one. The /4 output of the A160 is used to switch. The output 1 of the A161
Thread view
Attachments: 0
2018-09-17 by Florian Anwander
Hi Am 15.09.18 um 14:02 schrieb juanvb@icloud.com [Doepfer_a100]: click — step2 click — step3 click — step4 click — step8 click — nothing - stays in 8 click — nothing - stays in 8 click — nothing - stays in 8 click — step1 This means that the address bus high bit is some how rece
Thread view
Attachments: 0
2018-09-15 by juanvb@icloud.com
I changed my A154 A155 (2 modules) from one rack to another and I think one of my A155s broke Something wasn't working Ithoght it was the connection to 154 board. I connected the a-154 board to ST1 instead ST2 on the first sequencer. It was that I had connected wrongly one of the
Thread view
Attachments: 0
2018-09-14 by Ian Campbell
hi dieter, yes, i did think i may need to send the unit for repair. i just wondered if it was something people had seen before, and if there was a "reset" maybe. i know andy at emis so will contact him. many thanks for the advice.ian c. From: "yahoo@doepfer.de [Doepfer_a100]" To:
Thread view
Attachments: 0
2018-09-13 by Bakis Sirros
Excited to announce that Dystopia (DiN56) by Parallel Worlds & Dave Bessell is now available on the DiN Bandcamp store as CD / Download. https://din.org.uk/album/dystopia-din56 The names of both Parallel Worlds and Dave Bessell should be very familiar by now to followers of the D
Thread view
Attachments: 0
2018-09-13 by yahoo@doepfer.de
Hello, I'm sorry about the problems with the unit. From the distance it's difficult to make a diagnosis. I'd recommend to initialize the unit as described in the user's manual. If this does not help the unit has to be sent in for repair. In this case please follow the repair note
Thread view
Attachments: 0
2018-09-13 by Ian Campbell
hi all, Doepfer Maq16/3 new but a few years old (blue LED version) from Thomann. I live in the UK. Been working fine up until now,. But recently It has been freezing, the screen displays random text nonsense characters, then stops functioning. the buttons then go inactive, The on
Thread view
Attachments: 0
2018-09-12 by 2494axe@gmail.com
TAME MACHINE SOLD
Thread view
Attachments: 0
2018-09-10 by Bakis Sirros
Demo Mix of the soon to be released second volume in the Tone Science series - Tone Science Module No.2 Elements and Particles. https://soundcloud.com/ianboddy/tone-science-module-no2-elements-and-particles-demo-mix music made with Modular Systems! in the Parallel Worlds track, i
Thread view
Attachments: 0