Yahoo Groups archive
Messages
Page 67 of 564 · 28179 messages matched
2013-07-29 by Zoë Blade
Hi! I managed to buy an old G3 case that's a bit of a fixer-upper... (It looks and smells like it might have been sitting in a shed for a good few years...) Our plan (my more-electronics-inclined partner is helping me out here) is to clean the actual metal case, and hopefully rep
2013-07-29 by yahoo@doepfer.de
> Hi all, > Wondering if anyone here has done this mod? > > I'm not sure whether I should be: > a) leaving the capacitor in place & soldering the legs together, > b) removing the capacitor & replacing it with a wire, > or c) removing the capacitor & not putting anything in its pl
2013-07-29 by yahoo@doepfer.de
> Hi Group! > > This will be my first contribution after having lurked on the > list for a while. > > I have 2 Doepfer LC9 cases that I bought in the US (and filled > with modules). > Now I'm about to move them to the EU (Sweden) permanently and I'm > trying to figure out if ther
2013-07-29 by analogmonster@ymail.com
The supply with those cases has the transformer directly on the supply board. So you would need to replace the whole supply with a 230v model, change the fuse value and the label on the back so no chance of someone putting the wrong voltage through if you sell the case in the fut
2013-07-29 by mcetilia
Hi all, Wondering if anyone here has done this mod? I'm not sure whether I should be: a) leaving the capacitor in place & soldering the legs together, b) removing the capacitor & replacing it with a wire, or c) removing the capacitor & not putting anything in its place. Any clari
2013-07-28 by glitzerstrahlmusic
Hi Group! This will be my first contribution after having lurked on the list for a while. I have 2 Doepfer LC9 cases that I bought in the US (and filled with modules). Now I'm about to move them to the EU (Sweden) permanently and I'm trying to figure out if there is a way I can c
2013-07-24 by cosmosuave
Did not think of Amazon thanks for the tip... Checked out Deal Extreme but nothing... Ordered those stackcables from Analogue Haven... bri. --- In Doepfer_a100@yahoogroups.com, Jason Hollis wrote: > > Yes, get the stackcables. > They should come with every module, IMO. > > There'
2013-07-23 by Jason Hollis
Yes, get the stackcables. They should come with every module, IMO. There's also the option I call the 'kludgemult': http://www.amazon.com/Belkin-Rockstar-Multi-Headphone-Splitter/dp/B00475K64E -- ~!J! http://www.endif.org [Non-text portions of this message have been removed]
2013-07-23 by cosmosuave
Equipment... 2 Darkenergy's 1 DARKTIME I am looking to slave my 2nd DE from the master DE which is rx'g a 16 step sequence from the DARKTIME and need to know the best way to do this so it acts like a 2 voice synth... Can I use the cv/gate controls at the rear of the 1st DE (maste
2013-07-23 by Florian Anwander
Hello Welcome! Florian
2013-07-23 by cosmosuave
Hello... Just a note about myself... I am a producer and Live PA artist from Toronto... My current rig for shows involves no computer and the following bits of gear... Elektron Machinedrum SPS1-MKII UW DARKTIME DARKENERGY (2) Roland MKS-30 Ensoniq DP/4 Moog Minitaur Mbase01 A&H Z
2013-07-22 by yahoo@doepfer.de
> I'm getting some odd behaviour out of the arp in my Dark Energy Mk1. > > All modes and controller messages to control the arp give the > expected behaviour, apart from the "Overwrite" mode. When in that > mode, which should arp around the last 6 notes played, then > gradually o
2013-07-22 by yahoo@doepfer.de
> Hi, does the quad decay work fine on 15v or can it be modded to do so? > > Also is there a list anywhere of modules that are fine for 15v? > > Thanks! Please refer to the FAQ page of our website: www.doepfer.com > FAQ > A-100 > Power supply and case for A-100 modules The A-142-
2013-07-20 by woof_dave
I'm getting some odd behaviour out of the arp in my Dark Energy Mk1. All modes and controller messages to control the arp give the expected behaviour, apart from the "Overwrite" mode. When in that mode, which should arp around the last 6 notes played, then gradually overwrite eac
2013-07-19 by Antonio Tuzzi
Hello friends literally unused �. both for 250 euro� thanks Antonio [Non-text portions of this message have been removed]
2013-07-17 by Neal Layton
Thank you! After some excellent customer service from Schneiders Buero I received a replacement Doepfer adjusted fp5 pedal which works perfectly with the a177.2- and it's a joy to use. Creating and controlling modulations through hands AND feet I feel I am finally able to fully '
2013-07-17 by andy
Hi, does the quad decay work fine on 15v or can it be modded to do so? Also is there a list anywhere of modules that are fine for 15v? Thanks!
2013-07-14 by Nicholas Keller
Zoë, I have emailed them. Their website changed from wildtek.free.fr to wildtek.net, and now there is no mention of Q-ONTROL, only links to audio tracks and mixes. I said if no reply in 72 hours, I will upload to archive. Nick Sent from the future On Jul 13, 2013, at 6:17 PM, Zoë
2013-07-14 by Bakis Sirros
hi all, for sale (or for trade with Buchla items only) : my fantastic fine cosmetic and working condition Analogue Systems RS370 Polyphonic Harmonic Generator and RS375 expander. these modules can do a million things and i really like them, but i have two pairs and that's why i a
2013-07-14 by Nicholas Keller
Thank YOU, Peter! Sent from the future On Jul 13, 2013, at 10:24 PM, Peter Sedin wrote: > brilliant.. > > > 2013/7/14 Peter Sedin > >> >> thanks for this! >> >> ---------- Forwarded message ---------- >> From: niroke >> Date: 2013/7/13 >> Subject: [Doepfer_a100] track made to dem
2013-07-14 by Peter Sedin
brilliant.. 2013/7/14 Peter Sedin > > thanks for this! > > ---------- Forwarded message ---------- > From: niroke > Date: 2013/7/13 > Subject: [Doepfer_a100] track made to demonstrate timing multiplication in > MAQ > To: Doepfer_a100@yahoogroups.com > > > ** > > > http://vimeo.co
2013-07-14 by Peter Sedin
thanks for this! ---------- Forwarded message ---------- From: niroke Date: 2013/7/13 Subject: [Doepfer_a100] track made to demonstrate timing multiplication in MAQ To: Doepfer_a100@yahoogroups.com ** http://vimeo.com/70227036 This video matches the soundcloud link I posted the o
2013-07-13 by Zoë Blade
You could always e-mail the developers and ask them for permission to upload the program to archive.org. It's like the Internet's museum. :)
2013-07-13 by Bakis Sirros
hi Nick, thanks for helping the MAQ 16/3 users ! i do not own a MAQ 16/3, but this would be great help to people working with Ableton Live and MAQ. best regards, :-) Bakis Sirros [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Wor
2013-07-13 by niroke
I did a search of this forum for Q-ONTROL and found no results. Q-ONTROL V1.0 is/was an add-on pack for Ableton Live for controlling all aspects of the MAQ16/3 with MIDI commands. It appears that the developers are no longer working on it, and I was told that their site is no lon
2013-07-13 by niroke
http://vimeo.com/70227036 This video matches the soundcloud link I posted the other day in the DoepferMAQ group. It shows Row 2 altering the timing of both Rows 1 + 2. Row 1 is sequencing an A-100 patch, which was recorded in one take, with realtime manual control of FM Depth, Cu
2013-07-11 by Florian Anwander
Hello > Just got a msy2 that Im trying to connect with ableton my tr606. > Im using a cheap usb-midi converter, but its not working. > abelton -> midi-usb cable ->msy2 -> tr606 > > what Im doing wrong? > the msy2 works with midi clock messages, or can be trigged with midi? It wor
2013-07-11 by aletropdj
Hi all, Just got a msy2 that Im trying to connect with ableton my tr606. Im using a cheap usb-midi converter, but its not working. abelton -> midi-usb cable ->msy2 -> tr606 what Im doing wrong? the msy2 works with midi clock messages, or can be trigged with midi? thanks in advanc
2013-07-08 by isoldeandisobelle
Hi there Dieter, thank you for the reply. More than anything, I think that it may be outputting the same amount of hum as the 6U, but appears louder due to it's larger size and emptiness (soon to be remedied! :) ) I have learned something about transformers and power supply by as
2013-07-08 by yahoo@doepfer.de
> Hi - Thank you both for your replies. > > I am not sure what you mean by ''mechanical'' but, the sound is > coming from the transformer itself. It is not too loud but I can > hear it from a short distance away. The earth cables are all > connected properly. My other 6U case is
2013-07-07 by analogmonster@ymail.com
The led decay is normal, your 6u simply has more load so they decay faster. Glad you're not worrying any more On 7 Jul 2013, at 20:37, "isoldeandisobelle" wrote: > > Thank you very much to you both for your help. > > I earlier removed a module from the 6U case and put my ear has
2013-07-07 by analogmonster@ymail.com
I agree to some extent, but he does state the frequency changes according to which modules are being used, which means it doesn't match the mains frequency On 7 Jul 2013, at 19:20, "anoop.sahal" wrote: > > > I think all coil based voltage transformers will emit noise. It is often
2013-07-07 by isoldeandisobelle
Thank you very much to you both for your help. I earlier removed a module from the 6U case and put my ear has close to the transformer has I dare, and yes, there is a slight hum being emitted, only slight and barely noticeable. I have had this case for some time and have never ha
2013-07-07 by Florian Anwander
Hello I assume you mean a mechanical hum. Right? If so, then it should be related to the method how the powersupply is fixed to the housing. Florian On 07.07.13 00:31 , isoldeandisobelle wrote: > Hi gang - > > I have a 6U case and a 9U case, the 9U PSU hums (which changes in freq
2013-07-07 by anoop.sahal
I think all coil based voltage transformers will emit noise. It is often due the coils attracting and repelling one another at each voltage cycle change. Winding them tightly helps initially but the coils lengthen as they age and they loosen up. Varnish helps delay the loosening
2013-07-07 by isoldeandisobelle
Hi - Thank you both for your replies. I am not sure what you mean by ''mechanical'' but, the sound is coming from the transformer itself. It is not too loud but I can hear it from a short distance away. The earth cables are all connected properly. My other 6U case is connected to
2013-07-07 by Nicholas Keller
Sorry, I don't know what to suggest. Hopefully Dieter will respond. There is a ground wire that attaches to the case itself, is that connected? I don't think that is the problem, but you should make sure it is connected. If you bought this stuff new, you should contact Doepfer di
2013-07-07 by isoldeandisobelle
It is version 2. --- In Doepfer_a100@yahoogroups.com, Nicholas Keller wrote: > > Is it the torrid ring type (version 2) or the older black box type? My old black box version 1 PSUs used to hum, but I've upgraded now. > > Nick > > > On Jul 6, 2013, at 6:31 PM, "isoldeandisobelle"
2013-07-06 by Nicholas Keller
Is it the torrid ring type (version 2) or the older black box type? My old black box version 1 PSUs used to hum, but I've upgraded now. Nick On Jul 6, 2013, at 6:31 PM, "isoldeandisobelle" wrote: > Hi gang - > > I have a 6U case and a 9U case, the 9U PSU hums (which changes in fr
2013-07-06 by isoldeandisobelle
Hi gang - I have a 6U case and a 9U case, the 9U PSU hums (which changes in frequency when different modules are in use.) - the 6U does not do this.... is this ok?
2013-07-03 by Neal Layton
Hello all, I've just one more quick question before I do this mod- There's a 0.1u capacitor with a switch in parallel marked AC/DC coupling. I wondered what the purpose of AC coupling was in this application? Thanks, Neal
2013-06-28 by Pete Dako
Thanks Dieter and Chris x2 ... That's a brilliant idea getting a second MAQ. I already have blue LEDs on my MAQ, but a black face model to match my Dark Time would look nice too :D On Thu, Jun 27, 2013 at 3:10 AM, christian ienni wrote: > ** > > > i would also be interested in fi
2013-06-27 by yahoo@doepfer.de
> Hi I am running 3.50 in the MAQ 16/3 I just bought and noticed > there is a newer update available The latest firmware version > is 3.72 (as of summer 2012) however have not found any further > info on what features have been added. Can anyone please explain? > thanx, PETE Pl
2013-06-27 by christian ienni
i would also be interested in finding out about this. though my MAQ is about a decade old, version 3.40. i imagine a firmware upgrade for it would involve a chip swap? and truth be told it does work great as is; there'd have to be a really compelling new feature to justify the up
2013-06-27 by pete_dako
Hi I am running 3.50 in the MAQ 16/3 I just bought and noticed there is a newer update available The latest firmware version is 3.72 (as of summer 2012) however have not found any further info on what features have been added. Can anyone please explain? thanx, PETE
2013-06-27 by pete_dako
Dark Time will do MIDI ( & CVs) out/in Oberkorn M3 does not send out MIDI just CVs - though it responds to a MIDI clock in both are wonderful and uniquely different ditto MAQ 16/3 I suggest buy all three! :D --- In Doepfer_a100@yahoogroups.com, "York Luethje" wrote: > > Did you
2013-06-26 by Neal Layton
Hi Florian, Many thanks for the reply. That all makes sense. I'm modifying one of my A110's for use with the Universal Vactrol A101.9, making a little 4hp module to sit alongside the A110, so I will try adding these extra two FM modifications as well which will fill up the remain
2013-06-25 by Florian Anwander
Hello In general: I cannot speak for Dieter, but I assume, he is adding these extensions to the schematics as suggestions for diyers with at least a little knowledge. If I was him, I would keep it that vague, so noone can complain about "works not like expected" as he does not se
2013-06-25 by Neal Layton
Hello all, This option for Soft sync, and looking at the schematic also perhaps linear FM option(?) looks interesting. However there appears to be Potentiometers with no value after their sockets in. Am I reading this correctly? If so what is their function and values? Thanks, Ne
2013-06-24 by isoldeandisobelle
Thank you very much for the reply - I will look in to this. Best wishes --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hello > > Am 24.06.2013 12:58, schrieb isoldeandisobelle: > > is there a schematic on how to add this feature? > http://www.doepfer.de/a110.htm