Re: QTR Installation Problems / Feedback on Mac & PC
2014-09-24 by richard@...
I just re-read your original post, and it sounds like you may have not added the printer and QTR driver through Print and Fax in your system preferences. Here
Messages
Browse messages
Page 79 of 318 · 15852 messages matched
Re: QTR Installation Problems / Feedback on Mac & PC
2014-09-24 by richard@...
Are you connected to the printer with anything other than USB? I know that had caused some problems for me in the past. Look in your
QTR Installation Problems / Feedback on Mac & PC
2014-09-21 by michaeld1@...
Hello Everybody, I am a new QTR user thankful to all of you for supporting the development of these very useful tools, which I have devoted time in the last
Re: [QuadtoneRIP] Re: QTR 21 Step Wedges not linear?
2014-09-18 by Jacques Caron
Hi You are so right! I m still using Photoshop CS3 and since I have the no colour management , I m not looking too much ahead. As for the video
Re: [QuadtoneRIP] Re: QTR 21 Step Wedges not linear?
2014-09-18 by Richard Smallfield
What on earth have Adobe been thinking of, removing the ability to disable colour management? They know we need to make profiles. It s a program for
Re: [QuadtoneRIP] Re: QTR 21 Step Wedges not linear?
2014-09-16 by Paul Roark
See if the material at p. 15 (or pp. 11 on) of http://www.paulroark.com/BW-Info/Eboni-4-Plus.pdf are helpful. The inkset doesn t make any difference. The
Re: QTR 21 Step Wedges not linear?
2014-09-15 by mfaidengold@...
hello all, first time i m posting, so I hope I get lucky with an answer. I have printed the 21 step white to black using (now print-tool, hence no color
RE: [QuadtoneRIP] Re: Creating custom gray ICC profile (QTR workflow)
2014-09-15 by Elliot Puritz
Thanks for the correction Tyler. Elliot From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] Sent: Monday, September 15, 2014 5:39 PM To:
RE: [QuadtoneRIP] Re: Creating custom gray ICC profile (QTR workflow)
2014-09-15 by tyler@...
nope, his QTR profiles are made for Piezography B&Q inksets. The Conecolor inks are color OEM replacement inks, so you d use the profiles in QTR made for
RE: [QuadtoneRIP] Re: Creating custom gray ICC profile (QTR workflow)
2014-09-15 by Elliot Puritz
OK…so if I understand correctly, if one is using Jon s new color inks with his QTR profiles/and Piezography inks with his QTR profiles, than one should be
RE: [QuadtoneRIP] Re: Creating custom gray ICC profile (QTR workflow)
2014-09-15 by tyler@...
unfortunately there are profiles and there are profiles... you are exactly right that supplied profiles from Cone, or those supplied with QTR itself for
RE: [QuadtoneRIP] Re: Creating custom gray ICC profile (QTR workflow)
2014-09-15 by Elliot Puritz
I admit to being a bit puzzled about the entire profile business . I recognize that some here are very computer savvy, and enjoy making their own profiles
Re: Creating custom gray ICC profile (QTR workflow)
2014-09-15 by tyler@...
there has to be a some gotcha in there somewhere making this more difficult than it should be. Maybe take a look here, everything is provided, charts and
Re: color management, gray, in CC.. one more time
2014-09-15 by rxchaos@...
Thank you Richard, I was trying to read the data from images included in QTR. I ll try using the method you posted. I appreciate the help. -chetty
Re: color management, gray, in CC.. one more time
2014-09-15 by richard@...
I just commented on a similar issue in one of the other recent threads, but my reply isn t showing up. Are you trying to read the data from the images included
Re: Creating custom gray ICC profile (QTR workflow)
2014-09-15 by richard@...
The header info in the reference files for the step-wedge images included in QTR isn t recognized in ColorPort. I did the same thing, but using the same value
Re: Creating custom gray ICC profile (QTR workflow)
2014-09-15 by tyler@...
Colorport doesn t seem to support grayscale targets. So importing it as CMYK works fine. I believe that method was worked up by Scott Martin at Onsight, and
Re: [QuadtoneRIP] color management, gray, in CC.. one more time
2014-09-14 by Chetty Ramanathan
I do use PrintTool, and like it very much. Printing the target patches to be read by i1Pro is not what I m having trouble with. It s reading the posted
Re: [QuadtoneRIP] color management, gray, in CC.. one more time
2014-09-14 by tyler@...
Print Tool is indeed excellent, and a remarkable option for many of us who depend on capabilities being taken away as our major tools develop into more
Creating custom gray ICC profile (QTR workflow)
2014-09-14 by rxchaos@...
Hello… I’m following Diallo’s document “Quiadtone RIP, A Better B&W) to create a custom grayscale ICC Profile. I use a Mac (Mavericks 10.9.4),
MIS UT-14 kit for sale...
2014-09-10 by J.F. Felinik
Making my Epson 1400 a color printer again, and selling a full 4 oz bottle set of UT-14 (Glop is only half full but the rest are full and sealed). Shipping
Re: [QuadtoneRIP] color management, gray, in CC.. one more time
2014-09-10 by Myron Gochnauer
Print-Tool is the least problematic piece of software I use for photography, and probably the simplest as well. If it has any problems, and have not
Re: [QuadtoneRIP] color management, gray, in CC.. one more time
2014-09-09 by tyler@...
You really can t do profile/linearization without tricky stuff or Print-Tool. (Print-Tool is not something that needs to be learned ) I know Roy, there are
Re: [QuadtoneRIP] color management, gray, in CC.. one more time
2014-09-09 by Roy Harrington
It s hard to keep up with the CM issues of Apple and adobe but I think the current stuff ALWAYS converts whatever you send to ABW or QTR driver to sRGB some
Re: Error Message concerning TIFF Bitmap Buffer
2014-09-09 by docsock41@...
After re-downloading and re-installing QTR, the program was able to handle TIFF files without the threatening message. Apparently, stuff happens, and nothing
color management, gray, in CC.. one more time
2014-09-09 by tyler@...
so since there are no color management options for printing grayscale files now, can we assume a grayscale profile chart, untagged, is going straight to driver
Re: [QuadtoneRIP] print quality change after PS CC upgrade
2014-09-09 by tyler@...
I should add, the only thing that would explain this problem, if it was due to the PS change, is something basic about the way per channel data is being handed
Re: [QuadtoneRIP] print quality change after PS CC upgrade
2014-09-09 by tyler@...
HI Roy, they tried to force matching colorsync behavior by using your LAB RGB profile, SInce SOMETHING will happen in CC, attempting to control that something
Error Message concerning TIFF Bitmap Buffer
2014-09-09 by docsock41@...
After death of a computer and crashing of a hard drive on my latest computer, I thought I had QTR working successfully until ...... In attempting to print a
Re: [QuadtoneRIP] print quality change after PS CC upgrade
2014-09-09 by Roy Harrington
Hi Tyler, CS3 was the last of the photoshops where the color management worked properly for grayscale printing. With CC there will be a CM conversion that you
Re: [QuadtoneRIP] print quality change after PS CC upgrade
2014-09-08 by Mark Savoia
Could be something as silly as a ôcolor spaceö mismatch from the old version to the new. Like Dot Gain +20% vs Gamma 2.2 Mark www.stillrivereditions.com ...
Re: [QuadtoneRIP] print quality change after PS CC upgrade
2014-09-08 by tyler@...
well of course PS3 worked perfectly, in every way, but eventually they had to change, it seems impossible to stand still. Whatever is the most recent CC
Re: [QuadtoneRIP] print quality change after PS CC upgrade
2014-09-08 by Mark Savoia
So they went from Photoshop 3 to which version of CC? That is a big jump. Also, doesnÆt the version of Photoshop not really matter to QTR? Mark
print quality change after PS CC upgrade
2014-09-08 by tyler@...
Seems my friends don t like the forums. they just call me!! Since I don t know, I ask here! A friend has been printing with a 4800 and PS 3, on QTR for years,
QTR printing faliure
2014-09-03 by carbonprint1946@...
Hello All, I am having trouble printing with QTR on my Epson R2880. I am trying to print negatives (6 x 9) on Pictorico OHP 8 x 11 1/2. QTR prints one third to
Re: Epson 9890 + DataColor Spectrometer
2014-08-15 by paraglide@...
Thanks Paul, your document looks like what I need. I ll give it a go and report back in a couple days.
Re: [QuadtoneRIP] Epson 9890 + DataColor Spectrometer
2014-08-14 by Paul Roark
See if this is of any help: http://www.paulroark.com/BW-Info/Spectro.pdf Paul www.PaulRoark.com On Thu, Aug 14, 2014 at 11:20 AM, paraglide@yahoo.ca
Epson 9890 + DataColor Spectrometer
2014-08-14 by paraglide@...
Howdy, I have been using Quadtone RIP for years (Epson 4000 and 4880) and have just used the included profiles. Never made a profile! Now I have an Epson 9890
Re: Creating new curve Text File - 2 questions
2014-08-05 by richard@...
That GRAPH_CURVE=YESline is for displaying the curve that is generated in terminal when running the install script on a mac. it looks like this: # K curve 0
Quad 7900 Printing Module
2014-08-05 by Wallace Kistler
I’m using QuadToneRIP GUI 2.7.0.0 with the Epson Stylus Pro 7900, and when I select the Quad7900 Printing Module, I get the following error when starting the
Re: [QuadtoneRIP] QTR zeros M & LC on a EB-8 profile
2014-08-05 by laureliano
Thanks dear friend. I ll be in touch with you soon Luiz Aureliano 2014-08-04 19:23 GMT-03:00 Clicio Barroso Filho clicio@clicio.com.br ... -- Luiz Aureliano
Re: [QuadtoneRIP] Re: QTR zeros M & LC on a EB-8 profile
2014-08-05 by Roy Harrington
Hi Luiz, Those are messages from the printer itself. I m not sure this is the issue -- but worth thinking about. The printer has 2 black inks - a matte and a
Re: [QuadtoneRIP] QTR zeros M & LC on a EB-8 profile
2014-08-04 by Clicio Barroso Filho
Dear friend Luis; Please give me a call me if you wish, I ve been using QD for a long time, including in both my 9900 s. Best regards, clicio@gmail.com Clicio
Re: QTR zeros M & LC on a EB-8 profile
2014-08-04 by laureliano
Hi Guys, My name is Luiz Aureliano. I ve working with fine art printing for long years and right now I have one HP Z3200 44 Photo and one Epson 9900. I have
Re: QTR zeros M & LC on a EB-8 profile
2014-08-04 by grimmieoldfart@...
Thanks Roy, I guess this validates the flat spot on my forehead!
Re: [QuadtoneRIP] QTR zeros M & LC on a EB-8 profile
2014-08-04 by Roy Harrington
You ve got 3 INK_3 s -- LLK is clobbering M and LK. GRAY_INK_3=LK GRAY_VAL_3=36 GRAY_INK_3=M GRAY_VAL_3=22.7 GRAY_INK_3=LLK GRAY_VAL_3=12.3 Roy On Sun, Aug 3,
QTR zeros M & LC on a EB-8 profile
2014-08-04 by grimmieoldfart@...
I am/have created a QTR profile for PA325 (QTR-CurveView 2.7.5.0) that uses all 8 inks of a R3000. When I view the curve using QTR Curve, I noticed the M &
Creating new curve Text File - 2 questions
2014-08-01 by robert@...
1. When creating a new text file (to print a step wedge), I m copying one I have that works pretty well; however, it has a Gray Curve that I want to eliminate
Re: [QuadtoneRIP] QTR Stepwedge Tool.jsx
2014-07-27 by Greg Franco
I just tested it using CS5 and Win XP and it ran fine... I didn t have a real calibration tablet so I just used an imported image of one to test it. It ran
QTR Stepwedge Tool.jsx
2014-07-27 by sanking@...
Does the Stepwedge Tool. jsx work with CS5 and or CS6? The directions in Version 1 suggest only use of CS3 or CS4. Sandy