Re: [datacolor_group] Spydercheckr?
2010-09-02 by Rick Ryan
Looks like SpyderLensCal has been announced. Any additional info besides what is on your website? Rick
Messages
Browse messages
Page 19 of 112 · 5574 messages matched
Re: Printing Targets with Snow Leopard / Epson R1800
2010-09-01 by grandpollo
I know there is a lot of hue and cry over printing targets in Photoshop etc. Since I use Spyderprint and this group is about using Datacolor programs it has
Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-31 by Mark
grandpollo wrote . . . Since the Epson driver and the R1800 are essentially obsolete in Snow Leopard. Which is why my R1800 is on Craigslist and the R3880
Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-31 by grandpollo
No. The problem is not making profiles at all. Spyderprint does that fine and in any case the Epson icc profiles are quite good. Very good, actually. The
Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-31 by Jack Winberg
*Mark: I have seen a lot of flailing on this list about this issue, and your reference to the Luminous Landscape article was extremely illuminating about the
Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-31 by Mark
So a common problem under Mac OS10.6+ and PScs4+ is printing an untagged image with no conversion, as needed for a target to be profiled. The work around being
Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-30 by grandpollo
I am or was using 6.12 as well. There is a UK driver 6.57 but it is no better and you lose all or many US sized paper options like 11 X 14 and it won t let you
Re: [datacolor_group] Spydercheckr?
2010-08-29 by Cdtobie
... Sorry, you ll have to wait a couple weeks before there will be any public info on that... C. D. Tobie Global Product Technology Mngr. Digital Imaging &
Spydercheckr?
2010-08-29 by bill_hansen20012001
For those of us who have apparently fallen out of the loop, what is SpyderCheckr, and where can we find more info about it? The name makes it sound
Red Saturation in some applications
2010-08-29 by Vampire D
I am having problems with my setup. I am running Windows 7 x64 w/ Samsung 226c & HP LP2475w (Spyder 3 Pro 4.02) I initially calibrated my HP and didn t bother
Re: [datacolor_group] Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-29 by Vampire D
Sorry, I didn t notice I didn t change the subject line. I ll put it under a new thread. Do the actors on Unsolved Mysteries ever get arrested because they
Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-29 by Mark
grandpollo wrote: . . . ... What driver(s) have you used under 10.6x? Looks like the Printer Driver v6.12 is the latest. I have friend who
Re: [datacolor_group] Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-28 by C D Tobie
... Typically, when an image looks good in a color managed app, and bad in an noncolor managed app, that means that the calibration (which effects both) is
Re: [datacolor_group] Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-28 by Vampire D
Oh, and I am using a Spyder 3 Pro w/ latest Pro software.
Re: [datacolor_group] Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-28 by Vampire D
I am having problems with my setup. I am running Windows 7 x64 w/ Samsung 226c & HP LP2475w. I initially calibrated my HP and didn t bother with the Samsung as
Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-28 by grandpollo
Well I found a solution to the R1800. Buy a 3880 which are not only on sale here but have a $300 rebate. With Epson profiles or Moab profiles (great paper for
Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-27 by grandpollo
I am not sure how these settings allow CS5 or LR3 or any program that manages color for that matter to use a profile. In CS5, to even be able to use other than
Re: [datacolor_group] Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-26 by C D Tobie
... I ve never intended to imply that the color management issues are all fixed, as all fixed is far to broad a statement. There are printers for which new
Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-25 by Myron Gochnauer
The original posting and CDTobie s response seem to imply that Snow Leopard is now treating Epson print drivers properly. This has *not* been my experience
Re: [datacolor_group] Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-22 by Cdtobie
... Touring state whether the PS and LR results are less accurate than those from S3P, but given your title I m assuming they are at least somewhat different.
Re: Printing Targets with Snow Leopard / Epson R1800
2010-08-22 by grandpollo
Well I still have issues with an overall red cast to prints using this profile. The test prints within Spyder3 Print are fine, especially the quadrant with
Re: [datacolor_group] Printing Targets with Snow Leopard / Epson R1800
2010-08-21 by David Miller
... That therefore sounds wrong, because you want the target to look dark and broody , not good ...:-) ... Right. ... Right. ... That s the right way to
Printing Targets with Snow Leopard / Epson R1800
2010-08-21 by grandpollo
Hi folks. It s been a while since I last successfully profiled, in 1.05X and using CS3. Now I have 10.6.4 and CS5. So I did new profiles today and sure enough
Re: A Webinar Request ( QTR )
2010-08-21 by Keith
I have that PDF. Were it loses me is at the end. I have Excel, but I don t know how to use it. What is the data suppose to look like? How do I know if I ve
Re: A Webinar Request ( QTR )
2010-08-20 by johnvphoto
... Here s a little PDF from Paul Roark that might help: http://www.paulroark.com/BW-Info/Spectro.pdf
Re: [datacolor_group] Vampire skin tones
2010-08-20 by David Miller
... Most likely reason: incorrectly printed target (it happens). If I can take a quick look at your measurements, I should be able to tell you what the
Re: [datacolor_group] PrintFix Pro Update - Which One To Choose?
2010-08-19 by Cdtobie
... Yes... C. D. Tobie Global Product Technology Mngr. Digital Imaging & Home Theater Datacolor.com CDTobie@Datacolor.com
PrintFix Pro Update - Which One To Choose?
2010-08-19 by Rollin H
I have the PrintFix Pro product and the current software level shows as Spyder3 Print v3.5b9 (Library Level 1.72). When I check the Datacolor support page it
Re: [datacolor_group] Hahnemuhle papers and Epson 4000
2010-08-19 by C D Tobie
... Factors that vary image to image are typically not dealt with via printer profile. But if you can define what each category is (landscape vs portrait, or
Hahnemuhle papers and Epson 4000
2010-08-19 by brucepanock@att.net
David Finished printing the same image referred to in my prior post to the Hahnemuhle Rag Bright White 310 GSM paper. The image required a reduction of
Re: [datacolor_group] Update to Hahnemuhle Papers and EPSON 4000
2010-08-18 by Bruce Panock
David I have printed the same image using the profiles developed for Daguerre Canvas, Fine Art Pearl, and Fine Art Baryta 325 gsm); all Hahnemuhle papers.
Vampire skin tones
2010-08-18 by Allan
I recently bought a new Epson 3880 and the new Spyder3Print SR system. I m working on a couple of iMacs, one circa 2006 and the other circa 2008. Both are
Re: [datacolor_group] Update to Hahnemuhle Papers and EPSON 4000
2010-08-18 by David Miller
... That sounds good. The only other comment to make is that you don t want to use the target itself as a test when printing; many of the patches are
Update to Hahnemuhle Papers and EPSON 4000
2010-08-18 by brucepanock@att.net
To keep the facts straight: --Dell Imspiron Laptop running WIN 7, with all updates posted --Screen profiled with Spyder3Pro 4.0.2 updated yesterday and
Re: [datacolor_group] Problems building profiles for an EPSON 4000 and Hahnemuhle Papers
2010-08-16 by Bruce Panock
David * I print the targets directly through the S3P program not PS * I m PC based * Don t own any RIPs * Will otherwise follow all directions line by line.
Re: [datacolor_group] Problems building profiles for an EPSON 4000 and Hahnemuhle Papers
2010-08-16 by David Miller
... One more comment about how to get OSX drivers to print without color management. OSX 10.5.x and earlier, in the Print dialog (only need to do 1 thing): -
Re: [datacolor_group] Problems building profiles for an EPSON 4000 and Hahnemuhle Papers
2010-08-16 by Bruce Panock
Wonderful ... this I can work with. Will let you know how it turns out. Many thanks B ________________________________ From: David Miller
Re: [datacolor_group] Problems building profiles for an EPSON 4000 and Hahnemuhle Papers
2010-08-16 by David Miller
... Yes, I see that you have a support ticket open on that, and someone from tech support should be handling this with you now. I ve looked at your ticket, and
Re: [datacolor_group] Problems building profiles for an EPSON 4000 and Hahnemuhle Papers
2010-08-16 by C D Tobie
... That sounds like a calibration error. Clean your white tile, and recalibrate, pressing down very firmly on the spectro body as you click the button to
Re: [datacolor_group] Re: What's wrong?
2010-08-16 by C D Tobie
... BPC cannot make your blacks blacker; it can only make them less black. Is that something you would want (other than in device-proofs, where you are
Re: A Webinar Request
2010-08-16 by York
What time is the webinar? I looked on the website but was unable to locate any info on it. How do we join in?
Re: What's wrong?
2010-08-16 by capesamblue
David, Why would you choose to have Black Point Compensation off? Surely it would be a good thing to have on in normal printing (or were you only suggesting
Problems building profiles for an EPSON 4000 and Hahnemuhle Papers
2010-08-16 by brucepanock@att.net
I am the person referred to in a response to keith. My principle problem is scanning the targets. I am following the instructions in detail (I even stop the
Re: [datacolor_group] A Webinar Request
2010-08-15 by Cdtobie
... It should be possible to view the webinars, though not interactively, or course, at a later time. ... That would be up to Roy or someone who uses that
A Webinar Request
2010-08-15 by Keith
I noticed that DataColor is going to have a webinar coming up 18 AUG 2010. If posible I d like to ask if will be available to look at at another time. Also,
Re: What's wrong? A follow up
2010-08-15 by Keith
Last night I made the suggested profiles(a dark & light) as you suggested and printed them out via PS. They came out as you suggested so I ll say thank you for
Re: What's wrong?
2010-08-14 by Keith
I will create a support ticket. I did get the email I told you about(from Datacolor to the person on the other forum). Like myself, he has made profiles
Re: [datacolor_group] Re: What's wrong?
2010-08-14 by David Miller
Keith, The right way to get help with a question like this would have been to create a support ticket on the Datacolor web site and ask the question that way
Re: What's wrong?
2010-08-14 by Keith
I understand. I did print out only one measurement set(9 pages) and made the different profiles from that one set. I only measured the patches once.
Re: What's wrong?
2010-08-14 by Keith
But the print was made through S3P not PS. I did not even have PS open to print the image.