Re: [emax] Emax 1 Access Device
2010-05-19 by Bill Sterling
Dan, If you will send me your mailng address, I ll send you the Xircom device. These, or at least similar, are available on ebay. Once you have tried it, then
Messages
Browse messages
Page 102 of 236 · 11758 messages matched
Re: [emax] Emax 1 Access Device
2010-05-19 by Ted Summers
I just got my emax2 so I am not the expert on this yet, but from my understanding- All Emax 2 have SCSI from the factory, and if you are running the latest OS
Re: [emax] Emax 1 Access Device
2010-05-19 by Dan Luna
He Ted, Dan Luna here, I have an Emax II that does not have a hard disk. I do, however, have two jaz drives. The EII does have a scsi port. I would love
Re: [emax] Emax 1 Access Device
2010-05-16 by Ted Summers
Emax 1 doesn t support the SCSI Dump standard, so you can t move banks over it. I don t believe there is software that would make a PC be a SCSI Target , so
Emax 1 Access Device
2010-05-16 by raodonald
Hello, Has anyone ever used a Xircom PGSCSI USB to SCSI Converter? It s advertised as a plug-and-play WIN/MAC device. I just bought the kit. It comes with
BALDWIN IKE FOR SALE
2010-05-11 by darkstarjhub
I HAVE 2 BALDWIN IKE SAMPLER KEYBOARDS FOR SALE .ONE NEEDS A HARD DRIVE. THEY ARE BOTH IN VERY GOOD CONDITION [STUDIO USE ONLY ]. I ALSO HAVE MOST ORIGIONAL
Re: Emax 2 upgrades
2010-05-11 by fweakboy
Id be interested in the 8mb upgrade.
Re: Emax 2 upgrades
2010-05-10 by ditabeardmemo
Hi Ted: I have an 8MB Stereo Emax II rack. Are the rack PCBs and expansion options identical to those in the keyboard version? If so, perhaps I can help you
Re: Emax 2 upgrades
2010-05-09 by Everett
I can help where needed, but you re going to need to find an expander board. I doubt you will be able to homebrew that one. I think it s a multi layer pcb.
Emax 2 upgrades
2010-05-09 by Ted Summers
After reading around it sounds like there may be no way to currently add any upgrades to the Emax 2. Is anyone else interested in the Stereo upgrade that
Re: [emax] Got an Emax 2 finally!
2010-05-09 by Ted Summers
upon further inspection the keys aren t working properly because the previous owner spilled liquid into the unit and it is all gummed up.... looks like a good
Re: Got an Emax 2 finally!
2010-05-09 by Ted Summers
This is an Emax II 2201. 1MB of RAM. Looks like it was left in storage for a long time. Bad power switch- bypassed for testing, will replace. Screwy display-
Re: [emax] Re: Got an Emax 2 finally!
2010-05-08 by Ted Summers
When I looked up that 9346B it was so cheap I will just get a few so I have em in case anyone gets scrambled megs. I will put it in with an order for other ICs
Re: Got an Emax 2 finally!
2010-05-08 by Everett
Yeah, as far as I know the EEPROM controls which upgrades the EMAX detects... as long as the hardware is there obviously. You might need to fill some sockets
EMAX II for sale in Germany
2010-05-07 by matthias.gahr
Hi, I have an EMAX II (4MB, new big and quiet HD) in good condition for sale in Germany (near Würzburg). See pictures at:
Re: [emax] Re: Got an Emax 2 finally!
2010-05-07 by Ted Summers
I dunno. but I will find out.... :-) So to be clear on what the options are: 1) If it is mono, is there an update to stereo? 2) If it has an expansion board, I
Re: Got an Emax 2 finally!
2010-05-07 by Everett
Congrats! Which model did you get? I see a lot of helpful posts coming out of this purchase regardless :) Everett
Re: [emax] Got an Emax 2 finally!
2010-05-06 by Ted Summers
fortunately for me I have a slim floppy and CF drive waiting to drop right in there, so I won t have any issue for that one... ... Regards, Ted ... [Non-text
Re: [emax] Got an Emax 2 finally!
2010-05-06 by Matt Ferrari
congrats i just got mine working that i bought that needed a new disk drive ... From: Ted Summers Subject: [emax] Got an Emax 2 finally!
Re: [emax] Re: Got an Emax 2 finally!
2010-05-06 by Ted Summers
I vaguely remember such a post. Ithought perhaps it was because there was a charge for it. That being said, I paid for the Emax 1 schematic, and would expect
Re: Got an Emax 2 finally!
2010-05-06 by thenewyorkcowboy
There is a service manual that someone bought and offered to the group members who needed it, but that idea seemed to fizzle....
Re: [emax] Got an Emax 2 finally!
2010-05-06 by Ted Summers
See, you can learn something new every day! ... [Non-text portions of this message have been removed]
Re: [emax] Got an Emax 2 finally!
2010-05-06 by tu@...
The Emax II does not have an E chip, it has a G chip for sample playback and an H chip for filtering. /Tristan
Got an Emax 2 finally!
2010-05-06 by Ted Summers
Went on ebay today and got one, finally. It is in AS IS condition, so needs repair. But once that is done, I will have one for using as well as testing.
Re: [emax] Re: New Here and of course have a question
2010-05-04 by Ted Summers
I have replied to you via the Windows Live page where you sent your first request.... but I will send another email directly as well... Regards, Ted ...
Re: New file uploaded to emax
2010-05-04 by emax_dx5
Thanks for pointing it Tristan. I wrote from memory without checking if it was the E or EE PROM :)
Re: New Here and of course have a question
2010-05-04 by RayH
i too am looking for an scsi kit for my emax se rev 3 and i cant find anything for it
Problems with Northstar Max 3 and EMXP?
2010-05-04 by ditabeardmemo
Hi everyone: I recently purchased a new copy of the Northstar Max 3 CD-Rom for Emax II. As usual, I planned to copy the banks from the CD-Rom onto Compact
Re: [emax] New file uploaded to emax
2010-05-04 by tu@...
The 2732 is actually the boot/BIOS EPROM. The EEPROM is the 9306 chip that is used to store filter calibration settings etc as well as some bits telling the
New file uploaded to emax
2010-05-03 by emax@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the emax group. File : /Emax 1 rev c.bin
Re: EMAX II mono OS needed.
2010-05-03 by emax_dx5
Test done. A mono EMAX II will boot and work (apparently) with OS 2.14. My friend still didn t check about sampling, but he can move thru the menus
Re: Format CF Card Options
2010-05-03 by PaulD
Ted, You know my set-up. I have the slim drive... Suddenly, I can t format the cards anymore. Either the CF Cards, or the SD/CF Card Adapter... with start
Re: [emax] Memory Management problems?
2010-05-03 by Mike Dundas
I haven t used my emax in some time, but I recall similar problems at times... typically I would save pretty much constantly and if I even saw the slightest
Memory Management problems?
2010-05-03 by nsputnik
I have a problem with my Emax. When I assign and sample the first sound, everything is fine. When I assign and sample the 2nd or 3rd sound, for some reason the
Re: New version of EMXP with RS422 support
2010-05-02 by emax_dx5
Those are really good news. Hope to build it as soon as I have some time. Thanks to everyone involved into this design .
Re: New version of EMXP with RS422 support
2010-05-02 by fweakboy
awesome! many thanks E-Synthesist!!
New version of EMXP with RS422 support
2010-05-01 by esynthesist
The RS422 support has been released in the newest version of EMXP today. You can download this version (for free of course) on http://www.emxp.net As announced
A Mac for Alchemy
2010-05-01 by caillard a
First I Want o thank you all for your posts. I m a new emax owner. I bought this a few weeks ago and had a lot of fun with... since my floppy drive broke down.
Re: New Here and of course have a question
2010-05-01 by dragulatv
Thanks yes, Ted has contacted me already.I am going to try and do this in the next month have to save up some cash.
Re: New Here and of course have a question
2010-05-01 by esynthesist
Welcome. Yes, you can perfectly add SCSI to your Emax SE if is has rev 2 or rev 3 cpu board inside. Ted Summers - senior member of this group - is selling SCSI
New Here and of course have a question
2010-05-01 by dragulatv
May I say I have been lookign around the group and all I can say is WOW, I am the original owner of a EMAX 1 SE, no scsi port. What I want to do is add a SCSI
Re: EMAX II mono OS needed.
2010-05-01 by emax_dx5
Thanks for your reply. Still didn t try the 2.14. I will do and we ll see if it works with no problem about mono sampling.
Re: [emax] EMAX II mono OS needed.
2010-05-01 by tu@...
All the Emax II models should work with the latest OS. If it cannot boot with version 2.14 then the problem lies elsewhere... /Tristan
Re: [emax] Re: Format CF Card Options
2010-04-30 by Ted Summers
This kind of scenario is exactly why I say it is good to have a floppy in your emax and not remove it. If the CF or ZIp has a problem, with a floppy installed
Re: Format CF Card Options
2010-04-30 by PaulD
It s a No-Go. This is odd, I did this before like 3 times.....I ve been reading long and dunno what happened. I m even gonna update the firmware on the
EMAX II mono OS needed.
2010-04-30 by emax_dx5
Hello. A fellow of mine just bought an EMAX II Mono (1mb). He is looking for the OS but it seems it is not available (as Emax I do). As I think the 2.14
Re: Emulator II Sound bank Wanted
2010-04-29 by mishon53511
www.route66studios.com has the original Emax lib on CD available, these go in the Emax ll but can also be used with EMXP and saved to floppy. Rich
Re: Format CF Card Options
2010-04-28 by esynthesist
Physically formatting a disk on a PC for use in the Emax-II is not possible. But there s a work around which doesn t require the CF card to be formatted by the
Format CF Card Options
2010-04-28 by PaulD
Well, for some reason I lost the CF card I had my banks in. And remember in the past, and I even checked the old post...that I did copy the OS and banks to
Re: Emax 1 strange happenings
2010-04-24 by normanfclee
Hi, Sorry for the delay in replying. Many thanks for the comments; however I think I have got to the root of it. It seems It s me that is at fault and it s a