Re: Using a CF-CARD from SCSIforSamplers with the Emax
2010-04-23 by esynthesist
I just tried other jumper settings on those 3 additional pins but there s no difference at all: this CF CARD unit still doesn t work with neither my Emax I nor
Messages
Browse messages
Page 103 of 236 · 11758 messages matched
Re: [emax] Re: Emulator II Sound bank Wanted
2010-04-23 by jammie
i have them but they cost an arm and a leg a the time you can still purchase them from northstar contact me of list ... From: patrick_thomas@att.net To:
Re: Emulator II Sound bank Wanted
2010-04-23 by patrick_thomas@...
This seems to have gone un-answered from January(?) and also periodically before that -- could someone leave some authoritative answer on the forum, or point
Re: Using a CF-CARD from SCSIforSamplers with the Emax
2010-04-22 by esynthesist
You re right, this board has 3 additional jumpers (CN5, pins A, B, C) which are missing on the R-IDSC-E/R. Any idea how the jumpers should be set for Ensoniq
Re: [emax] Re: Emax II SE Development Disk?
2010-04-22 by Simon Forsyth
Emax I banks can be covert loaded into th Emax II without issue and then saved back out as a 16 bit bank. There was a SE synthesis banks set in Emax II
Re: [emax] Emulator II Sound bank Wanted
2010-04-22 by jammie
yep ... From: PaulD To: emax@yahoogroups.com Sent: Wednesday, April 21, 2010 10:21 PM Subject: [emax] Emulator II Sound bank Wanted Anybody have them? ... No
Re: Emulator II Sound bank Wanted
2010-04-22 by ditabeardmemo
Hi Paul: If you re looking for Emulator II sounds in Emax II format, I believe these were repackaged (at least in part) as the Universe Of Sounds library
Re: Emulator 3 question
2010-04-22 by ditabeardmemo
Hi David: Given that this is an E-mu Emax discussion group, you might be better off posting this question at either http://www.eiiiforum.com/ or the Emulator
Emulator II Sound bank Wanted
2010-04-21 by PaulD
Anybody have them?
Emulator 3 question
2010-04-21 by David Bulog
... [Non-text portions of this message have been removed]
Re: [emax] Re: Using a CF-CARD from SCSIforSamplers with the Emax
2010-04-21 by jammie
the additional 3 pins are at the bottom right seprate from the other jumper pins i was the 1 who gave the pin configuraton to scsiforsamplers to make them work
Re: Using a CF-CARD from SCSIforSamplers with the Emax
2010-04-20 by esynthesist
Do you mean the IDSC21-E or an IDSC12-E ? In fact I have the IDSC21-E from 1999. But where are the additional 3 pins ? As far as I remember it has the same
Re: Prob
2010-04-20 by esynthesist
I see. What you also can do is make a backup image of the full Greytsounds CD with EMXP and restore this image to a CF card with EMXP (a 512MB one or
Re: Prob
2010-04-20 by ditabeardmemo
Very informative! Thanks to both e-synthesist and Rob for your troubleshooting advice. Unfortunately for me, I do not own a SCSI CD-Rom unit that I can connect
Re: [emax] Emax 1 strange happenings
2010-04-19 by Ted Summers
When you replaced the power supply, did you replace the AC IN power connector ? If not you may have a bad connection there. On Apr 18, 2010, at 11:58 PM,
Re: [emax] Re: Using a CF-CARD from SCSIforSamplers with the Emax
2010-04-19 by jammie
no its an older version 1 board from iodata that works with the emax 1/2 and ensoniqs its called an idesc12-e and it was upto revision 2 software which was the
Emax 1 strange happenings
2010-04-19 by normanfclee
Hi, I just replaced my faulty power supply and have been having fun loading sounds via EMXP - many thanks E-Synthesist! All has been going well until I made up
Re: New user saying hello but also has problem...
2010-04-19 by normanfclee
New power supply installed and working now, good news. Howerver new problem has atarted, I ll open a new post for this one. Many thanks, Norman
Re: [emax] Re: Using a CF-CARD from SCSIforSamplers with the Emax
2010-04-19 by Ted Summers
1) The pin 29 is a master / slave designation pin on tne IDE Interface when using CABLE SELECT for IDE bus. If you have jumpered master you shouldn t need this
Re: Using a CF-CARD from SCSIforSamplers with the Emax
2010-04-18 by esynthesist
Update: after an e-mail of another Emax user, I checked the current internals of my CF CARD. It seems that the good board which I received a few weeks ago -
Re: Using a CF-CARD from SCSIforSamplers with the Emax
2010-04-18 by esynthesist
The IDE/SCSI board in my CF CARD is currently the R-IDSC-E/R revision 1.28; first it was equipped with the version 1.30.9 but that one didn t work with any of
Re: [emax] Re: Using a CF-CARD from SCSIforSamplers with the Emax
2010-04-18 by jammie
what scsi to ide board do you have with the cfcard if its the rscsi-er then these are the new revision boards and they dont work only the older revision boards
Re: Using a CF-CARD from SCSIforSamplers with the Emax
2010-04-18 by esynthesist
One other Emax user has responded via e-mail that he has exactly the same problems as me with the CF CARD on an Emax-I... ...SCSIForSamplers has removed the
Re: Prob
2010-04-18 by esynthesist
Indeed, it s a problem with the sequences and removing them will solve the problem - that doesn t hurt since there are no sequences programmed in that bank.
Re: [emax] Prob
2010-04-17 by Robert Cary
Hi I had the same problem with this bank. It s a error with the sequences. If you go into sequencer setup and erase the tracks you ll be able to convert it
Prob
2010-04-17 by ditabeardmemo
Hi everyone: I recently purchased a new copy of the Greytsounds Emax II library CDR, and converted all the banks to .EB2 image files (using EMXP, of course) so
Re: [emax] Upgrading and selling Emaxes with CF Card drives.
2010-04-16 by jammie
hi ted i have some spare rev c boards that you can add the scsi to and then give the option of exchange for rev 1 boards also i have got a ide to atapi flash
Upgrading and selling Emaxes with CF Card drives.
2010-04-16 by Ted Summers
Wondering if I was to get Emax and add SCSI, slim floppy, and internal CF/ PC Card drive. what people would be willing to pay for what is basically a turnkey
Re: [emax] SD CARD Floppy Emulator
2010-04-15 by jammie
dont use them they dont work they need a dos system and emax1 uses its own formating system i take it yours is a rev 1 board so you cant add scsi your best bet
Re: [emax] SD CARD Floppy Emulator
2010-04-14 by Ted Summers
The first link, the person that makes the floppy emulator may have to write support for an Emax disk image. Price here doesn t seem that bad. So may be viable
emax samplers for sale
2010-04-14 by jerome Hubbard
I have 2 origional emax sampler keyboards for sale. they are in pristine condition , but one needs a floppy drive. I also have some of the origional sample
SD CARD Floppy Emulator
2010-04-14 by andrewwyates
Hi Folks, Have any of you replaced your Emax floppy drive with an SD card reader ? I ve just bought an Emax 1 and am trying to figure out which of these
Re: [emax] Re: Best Mac to run SD on?
2010-04-13 by GG
I ll try a few things... also asked DBM to send me that program he suggested. Think I ll try the old SE30 that should be cool maybe with an 800K and
Re: [emax] Re: Best Mac to run SD on?
2010-04-13 by Ted Summers
Disk Dup Plus will work to copy the raw disks on old Mac OS. It was able to backup my Alchemy Master disk with the authorization locks on it (just like
Re: Best Mac to run SD on?
2010-04-13 by ditabeardmemo
E-Synthesist and Gino: I run a Macintosh SE/30 with a large number of Macintosh disk utilities, including Lido 7 and some others. I m sure one of these
Re: Emax II SE Development Disk?
2010-04-13 by ditabeardmemo
Thanks E-Synthesist! So just to clarify: The Spectrum Synthesizer development disk that E-Mu released for the original Emax also works with the Emax II? I was
Re: Best Mac to run SD on?
2010-04-12 by esynthesist
I forgot: probably the disks are 800KB Mac disks. These can t be copied on Windows machines as far as I know, not even by OmniFlop. So some raw disk copy
Re: Emax II SE Development Disk?
2010-04-12 by esynthesist
The Emax SE Development disk is available from the files section of this group. It s an EMX file. Perhaps I will upload a full disk image (e.g. for OmniFlop)
Re: Best Mac to run SD on?
2010-04-12 by esynthesist
With respect to the best Mac to run SD for Emax 1.12: I have managed to use the software successfully on: - Mac Classic - Mac SE/30 Both running either OS6 or
Re: Best Mac to run SD on?
2010-04-12 by esynthesist
Hi, Having these SoundDesigner for Emax 1.12 disks (master, backup and sound files) is really UNIQUE ! So I think the group would really appreciate it if you
Re: [emax] Emax II SE Development Disk?
2010-04-12 by Rish
Hey Brandt! did see it was you. Rish ... From: Brandt R. Gassman To: emax@yahoogroups.com Sent: Monday, April 12, 2010 7:31 AM Subject: [emax] Emax II SE
Re: [emax] Emax II SE Development Disk?
2010-04-12 by Rish
Someone correct me if Im wrong but the Emax 2 has the SE feature as standard OS. Rish ... From: Brandt R. Gassman To: emax@yahoogroups.com Sent: Monday, April
Emax II SE Development Disk?
2010-04-12 by Brandt R. Gassman
Hi everyone: I recently acquired an Emax II Turbo rack with fully expanded memory, and I m interested in learning more about the Spectrum Synthesis
Best Mac to run SD on?
2010-04-12 by Gino
I apologize if this has been covered before, but I just can t find a specific answer after searching the posts. Got this Emax Rack SE, HD with SD 1.2 disks.
Using a CF-CARD from SCSIforSamplers with the Emax
2010-04-09 by esynthesist
Hi I was wondering if anyone from the group is using a CF-CARD drive from SCSIforSamplers with his/her Emax-I ? I have an external CF-CARD drive here which I
Re: emax se
2010-04-03 by esynthesist
EMXP is in principle not capable of making installation disks for Emax - it can only handle soundbanks and operating systems. In reality it can do it if the
Re: any use for a broken emax power supply
2010-04-03 by emax_dx5
If nobody is interested on fixing it (jammie or so) I could be interested on take a look. Let me know before throwing it to trash.
Re: emax se
2010-04-03 by rv
nk you,but u re link doen st work,i guess alzo it come from emxp site,that a good thing,does i do images with this programme without a dos system?? if you ve
Re: emax se
2010-04-03 by fweakboy
theres an image of the SE software disk here in the files section download it and use, i think, http://users.skynet.be/emxp/index.htm, to make the disk then
any use for a broken emax power supply
2010-04-03 by pixfodase
I had to replace the power supply on the emax and so I have an old broken one here. I don t know what s wrong with it but if anyone is interested in having it