Re: [emax] Emax I - LCD problem
2010-02-19 by jammie
thats either a lcd malfunction or a cpu fault not sending the 8 bit binary info ... From: modd33@rocketmail.com To: emax@yahoogroups.com Sent: Friday, February
Messages
Browse messages
Page 106 of 236 · 11758 messages matched
Emax I - LCD problem
2010-02-19 by modd33@...
Hi, i changed the Emax I PSU (the new one is from an old PC) the Emax is still fully working except for the LCD (which was the only reason for changing the
Re: [emax] Emax HD - Hard Disk problems...
2010-02-19 by Ted Summers
termination.... otherwise the drive(s) could just be bad. On Feb 18, 2010, at 6:56 PM, andykinnetz wrote: I recently acquired an emax SE HD rack unit and I m
Emax HD - Hard Disk problems...
2010-02-19 by andykinnetz
I recently acquired an emax SE HD rack unit and I m having a hard time getting the unit to read any hard disk or zip drive. I have tried a couple scsi drives
Re: [emax] Re: Emax floppy drives
2010-02-16 by Rish
Posts like this always make me laugh, 98% of all our issues are with overseas orders and about 90% of them are because the buyer doesn t know how to put his
Re: [emax] Re: Emax floppy drives
2010-02-16 by Frequency Spectrum
take a look at the samsung sfd321b you can change the ready signal and drive select and other things. it has solder pads you just need to desolder and re
Re: Emax floppy drives
2010-02-15 by jamesulibarri
I will take 6 months to get the drive from you Rich. Forget it. Me and plenty of others have been down that road a few. Pass!!
Re: [emax] ??? Sound Designer for Emax ???
2010-02-15 by Matt Ferrari
sound designer 2.5 and 2.7 for the mac are showing in the files sectiopn of the group.... ... From: modd33@rocketmail.com Subject:
Re: [emax] Re: Emax Problem Diagnosis
2010-02-09 by Preslav Lefterov
Digikey seems to have them. Would these variations work: *AD7524* :
Re: [emax] Re: Emax Problem Diagnosis
2010-02-09 by jammie
YOU CAN STILL get them rs or digikey farnell ... From: Preslav Lefterov To: Sent: Tuesday, February 09, 2010
Re: [emax] Re: Emax Problem Diagnosis
2010-02-09 by Preslav Lefterov
Should I try replacing the AD 7524 and/or the TL082? How hard are these to find ? Preslav ... [Non-text portions of this message have been removed]
Re: [emax] Re: Emax Problem Diagnosis
2010-02-09 by jammie
yes it could be a broken cv dac or it could be the opamp the tlo82 ... From: Preslav Lefterov To: Sent: Monday,
Re: [emax] Re: Emax Problem Diagnosis
2010-02-08 by Preslav Lefterov
Jammie, Just tested: Preset Definition: Realtime controls: Pedal to FC - nothing; Pedal to Pitch - I hear it modulating the pitch. Then I tried MIDI A to FC: I
Re: [emax] Re: Emax Problem Diagnosis
2010-02-08 by jammie
you are not getting any cv voltage its just set to ov that no voltage so no voltage is being sent out by the ssm2300 ov means no resonance no volume no
Re: [emax] Re: Emax Problem Diagnosis
2010-02-08 by Preslav Lefterov
Jammie, Sorry for the delay. Got the readings: *IC41: * I have +10V on pin8, and -12V on pin4. *IC49:* I have +5V on pin 14 *SSM2300s:* On all 4 I consistently
Re: Point me to the places where to buy the right CF kit.
2010-02-08 by drifter7508
So you have this: Adapter AEC-7720U for sale... send me a PM with your paypal adress + email and I will send you money at once. Write down the sum you want
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-08 by jammie
yep thats the 1 ... From: drifter7508 To: emax@yahoogroups.com Sent: Monday, February 08, 2010 12:22 PM Subject: [emax] Re: Point me to the places where to buy
Re: Point me to the places where to buy the right CF kit.
2010-02-08 by drifter7508
http://www.span.com/product_info.php?products_id=1058 So this is one then? This one will work with the right CF adapter? Is this the one you have? By the
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-08 by jammie
no dopnt use that 1 dont work with out down grading it i have a spare 1 you can have for £50 plus postage ... From: drifter7508 To: emax@yahoogroups.com Sent:
Re: Point me to the places where to buy the right CF kit.
2010-02-08 by drifter7508
http://www.ggsdata.se/PC/aec7720uw.html Would this cards work with a 50 Pin adapter? The selles says it compatible with ULTRA SCSI.
Re: Point me to the places where to buy the right CF kit.
2010-02-08 by drifter7508
http://www.span.com/product_info.php?products_id=1058 They have it in sock for around 125 USD. Before I hit the buy button... Is this the prefered adapter to
Re: Point me to the places where to buy the right CF kit.
2010-02-08 by drifter7508
250 USD! Thats overpriced. =P They must have pretty good margins on that price. http://www.pc-pitstop.com/scsi_ide_adapters/aec7720u.asp I sent these guys a
Re: Point me to the places where to buy the right CF kit.
2010-02-08 by tristanupton
The AEC-7720U is still available from ACARD s online store: http://www.acard.com.tw/english/fb01-batcar.jsp# /Tristan
Re: [emax] Re: RS422 between Emax and PC
2010-02-08 by Julian
I ve been playing around at home with different configurations to determine the best clock receiver. That should be done in the next week or 2? then I ll
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-07 by jammie
have you any other samplers to try them with apart from the scsi to ide card being duff if you have another source to try on then you can rule that out ...
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-07 by jammie
i dont know what to surgest as that cdrom works on mine the r-idsc-e/r scsi to ide card that 1 dont work for my ensoniqs and i have not tried the emaxes with
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-07 by jammie
650mb ... From: thenewyorkcowboy To: emax@yahoogroups.com Sent: Sunday, February 07, 2010 6:40 PM Subject: [emax] Re: Point me to the places where to buy the
Re: Point me to the places where to buy the right CF kit.
2010-02-07 by drifter7508
Yes Im the one with the CD-Rom you recom. to buy. I have tried 2 different Quantum HD s in both my external cases and they run perfect in both of them. They
Re: Point me to the places where to buy the right CF kit.
2010-02-07 by thenewyorkcowboy
What is the final formatted capacity of the 1GB cards? Do they format anything above 540mb?
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-07 by jammie
have you tried it with any other hd or cdrom are you the 1 who had problems with the scsi cdrom also have you tried disabling the internal hd to see if it
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-07 by jammie
try removing pins 4 and 5 what version os is on it what scsi cables are you using and have you got a termination plug on there aswell as you dont need it if
Re: Point me to the places where to buy the right CF kit.
2010-02-07 by drifter7508
My Emax II Turbo has the latest OS installed. Internal HD is set to SCSI ID 1.
Re: Point me to the places where to buy the right CF kit.
2010-02-07 by drifter7508
No luck with those settings either im afraid.
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-07 by jammie
http://store.compuapps.com/idecf-reader.html i think the cf adapter is your problem heres a link to good one that works and they do them in black and white
Re: [emax] Where to send Power Supply Unit
2010-02-07 by Daniel Baum
I bought one of these. It was a very quick smooth transaction and my Emax II now works very well. It also gets less hot than it used to. D. ... From: jammie
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-07 by jammie
make sure its set to master pins 1 and 2 shorted now your cf card supports dma only so you need to jumper pin 7 this is for dma mode ... From: drifter7508 To:
Re: Point me to the places where to buy the right CF kit.
2010-02-07 by drifter7508
There is an image of the IDE CF card reader in my earlier post. (With all the other links an images) http://img62.imageshack.us/img62/1481/img0380p.jpg Just
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-07 by jammie
sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination ... From: drifter7508 To: emax@yahoogroups.com Sent:
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-07 by jammie
i dont know if that card works as its the updated version i could not get it to work with the ensoniqs but the older version which is the pdf that you got did
Re: Point me to the places where to buy the right CF kit.
2010-02-07 by drifter7508
Whoops! Here s the correct URL for the User manual of the IDE-SCSI BRIDGE: http://eab.abime.net/attachment.php?attachmentid=19128&d=1228279010
Re: Point me to the places where to buy the right CF kit.
2010-02-07 by drifter7508
SCSI TO IDE BRIDGE: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT My settings at the moment:
Re: RS422 between Emax and PC
2010-02-07 by esynthesist
The project to turn the device into a USB host for using it as a standalone flash device on Emax or EII has not started yet. We first want to release the
Re: [emax] Where to send Power Supply Unit
2010-02-07 by jammie
http://www.eprelectronics.com/store/html/Products/E-mu-Darwin-Model-4000-/Power-supply-Emax-Darwi-68.html this is the url buy it and have no problems for many
Re: [emax] Where to send Power Supply Unit
2010-02-07 by jammie
depends on where you live if you live in the states it will be cheaper for you to buy 1 from cpl as they are now selling them very cheap and the cost of repair
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-07 by jammie
what make and models did you buy first what jumper settings are you using as this makes a big difference what ide to cf card adapter are you using as some only
Re: [emax] Where to send Power Supply Unit
2010-02-07 by Ted Summers
Jammie here on the group repairs them...or has replacements.... On Feb 6, 2010, at 7:08 PM, PaulD wrote: Well it i take it that the resetting emax is really a
Where to send Power Supply Unit
2010-02-07 by PaulD
Well it i take it that the resetting emax is really a power supply issue, for nothing has really changed and the decal on the PSU looks...brownish. I read up
Re: [emax] Re: RS422 between Emax and PC
2010-02-07 by michael.a.padilla
Wondering where the below R&D project is at (12/21/09 email): this custom RS422 device I have been using can probably also be changed into a standalone device
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-06 by Brandt R. Gassman
Ah, OK. I understand the situation now. Sorry if you ve shared this information with the group already, but what external SCSI devices have you tried? The
Re: Point me to the places where to buy the right CF kit.
2010-02-06 by drifter7508
I have tried a bunch of different CF cards. Most recently Sandisk 512 Mb oldschool Dos fat 16 preform. cards. No luck. The Emax wont even find the units in the