Yahoo Groups archive
Messages
Page 35 of 56 · 2773 messages matched
2008-05-16 by Richard Lainhart
Pneuma http://www.vimeo.com/1014353 "Pneuma" is based on growth patterns generated by celluar automata software, processed in Adobe After Effects to create constantly changing structures ranging from crystalline to architectural. The soundtrack is a live improvisation on the Buch
2008-05-16 by nicholas_kent
I've been thinking along those lines too. Although I'm thinking for budget reasons one module at a time and not stopping at 4. As for myself, I'm weighing what I already have in non-Buchla modules . To give you suggestions I at least would think it's crucial to know if you have o
2008-05-16 by don hassler
I would think a 291e to be particularly useful for a tiny system. --- On Fri, 5/16/08, Chris Muir wrote: > From: Chris Muir > Subject: Re: [200e] Advice sought: configuration of a very small 4 panel space system > To: 200e@yahoogroups.com > Date: Friday, May 16, 2008, 3:59 AM > O
2008-05-16 by Chris Muir
On May 16, 2008, at 12:51 AM, jjsynth wrote: > I'm thinking about a very small Buchla system in one 4 panel space > boat. I would be very happy about the group's opinions about what > would > be a sensible configuration. The first three modules to recommend are easy 261e 281e 292
2008-05-16 by jjsynth
hi, I'm thinking about a very small Buchla system in one 4 panel space boat. I would be very happy about the group's opinions about what would be a sensible configuration. thank you, j
2008-05-14 by Don Buchla
Hi Nicholas, The 222e is best installed in a 12 or 18 cabinet. We can easily install a 6 unit boat in a cabinet. Or we can trade it in at full value on a 12 cabinet. Best wishes, Don Buchla nicholas_kent wrote: I just want to make sure I understand. Is it correct that the 222e ca
2008-05-14 by ezra buchla
hi > Is it correct that the 222e can only be properly installed in a 12 or > 18 cabinet? sort of. the idea is that the touch sensor must be flat (you wouldn't want to play it any other way), and the single panel with the optical sensor should be upright and pointing at you. insta
2008-05-14 by nicholas_kent
I just want to make sure I understand. Is it correct that the 222e can only be properly installed in a 12 or 18 cabinet? Also since as I understand it, say you have a 6 unit boat, which I take is more or less the center boat in the 18 unit cabinet. So would it be practical at a l
2008-05-13 by ezra buchla
yes... so it's hard to do unintentionally... On Tue, May 13, 2008 at 3:09 PM, don hassler wrote: > Mine doesn't quite self oscillate unless I feed one of the filters back > into the input. > > --- On Tue, 5/13/08, ezra buchla > > wrote: > > > From: ezra buchla > > > Subject: Re:
2008-05-13 by don hassler
Mine doesn't quite self oscillate unless I feed one of the filters back into the input. --- On Tue, 5/13/08, ezra buchla wrote: > From: ezra buchla > Subject: Re: [200e] Some questions about the 291e > To: 200e@yahoogroups.com > Date: Tuesday, May 13, 2008, 4:33 PM > hello > > th
2008-05-13 by ezra buchla
hello there are three filters in the 291e. each has its own output; there is also a summed output of all filters, each with its "amplitude" applied. so amplitude means exactly that; like a builtin vca for each filter, except it can actually apply some gain as well as attenuation.
2008-05-13 by jjsynth
hi, - what is meant by 'Amplitude'? Is this what is called resonance on other filters? And if so, does the 291e self oscillate? - What are the frequency ranges of the filter? The frequency pot has a max value of 4k but the bandwidth pot has a max value of 100 which I don't unders
2008-05-12 by ginorobair
Thanks, Don. That's the email addy that bounced back. I appreciate the help confirming that it was the right one. I'll try it again. Richard - if you're reading this, please drop me a line. I'm enjoying both discs... Grazie mille, ginorobair --- In 200e@yahoogroups.com, Don Buchl
2008-05-10 by nakedintruder
Hello, Yeah, on the Rails the pulses are properly converted to and from 5V gate signals, accounting for dual levels and duration. The general idea of the module is to provide two- way signal conversion for the three classes of 200e signals: audio, CV, pulses. In the case of CV co
2008-05-09 by Don Buchla
rlainhart@otownmedia.com> ginorobair wrote: Hey gang Can someone send me Richard's email address off-list? I tried contacting him through his Web site, but got a bounce back. Thanks! g grobair (at sign) emusician (dot) com ------------------------------------ Yahoo! Groups Links
2008-05-09 by ginorobair
Hey gang Can someone send me Richard's email address off-list? I tried contacting him through his Web site, but got a bounce back. Thanks! g grobair (at sign) emusician (dot) com
2008-05-09 by Richard Lainhart
I use my system with a Haken Continuum and the Haken Control Voltage Convertor, rather than going through MIDI. It takes quite a while to tune the voltage control ranges and offsets, but once it's done and stored, the tracking feels really accurate to me. I can sweep through a co
2008-05-09 by Chris Muir
On May 9, 2008, at 6:39 AM, joe Pascarell wrote: > is this really gonna be made? > i've been waiting ever since i saw the pic on matrixsynth > a couple years ago One major thing has changed, in that it's now planned to be a Eurorack Module. I personally like this, as I'm almost o
2008-05-09 by joe Pascarell
is this really gonna be made? i've been waiting ever since i saw the pic on matrixsynth a couple years ago i hope .... :) cray5656 wrote: the harvestman is putting out a module soon called the "transcontinental rail" I think and it lets you convert modular signals from the 1v/oct
2008-05-09 by nicholas_kent
--- In 200e@yahoogroups.com, "cray5656" wrote: > > the harvestman is putting out a module soon called the > "transcontinental rail" I think and it lets you convert modular > signals from the 1v/octave into the buchla so it will track via cv > from euro and frac..etc. > Any idea i
2008-05-09 by cray5656
the harvestman is putting out a module soon called the "transcontinental rail" I think and it lets you convert modular signals from the 1v/octave into the buchla so it will track via cv from euro and frac..etc.
2008-05-02 by Igor Medeiros
i like this one: http://electro-music.com/forum/topic-6196.html it's not an interview but it's a good story. On Fri, May 2, 2008 at 9:00 AM, cray5656 wrote: > hi all > > still saving for the Buchla I hope to have it in Sept, and I hope the > US dollar stays weak :-) > > I own Ana
2008-05-02 by Ronald Young
This is my favorite... http://elists.resynthesize.com/analogue-heaven/1995/08/185198/fwd- BUCHLA-BLAST-FROM-PAST.html
2008-05-02 by cuari7
Great sonic palette. Now, I am sure this plea has come up in these fora in the past, but I wonder if we could focus on doing more melodic stuff with the Buchla. Don't get me wrong; I enjoy the abstracts sonic collages, but I want to see what else the creative synth community can
2008-05-02 by cray5656
hi all not sure if I have shared this with you. I have been talking to Don Hassler in USA and we both sent each other DVDS choc full of improvs with our systems,,,i got his DVD today which is all Buchla 200e, so I played one of his tracks against one of mine Serge and Euro rack a
2008-05-02 by cray5656
hi all still saving for the Buchla I hope to have it in Sept, and I hope the US dollar stays weak :-) I own Analog Days the book but wondered if there have been any great interviews with Don about his life and purely Buchla the company...of the 2 interviews I have seen Don talks
2008-04-30 by ezra buchla
- eric's 3 boats are identical to the ones you'd find in a 12p cabinet; so, 1 boat has the power supplies, the others are connected with cables that include power and data busses. if i remember right, we also put some extra holes in the sheet metal and bolted the boats together..
2008-04-30 by alt-mode
Yes, the boats in the SKB case are bus connected. There are cables going between the boats. Only one boat has a power supply connected and it is deeper than the other boats. The cables interconnect the bus boards between the boats. It works pretty well but I don't know how well i
2008-04-30 by zaum
Can or are the separate boats in the SKB case bus connected to each other? I've got some case questions in general -- First a simple one, how much do a pair of rack ears run for one 4 module boat? I also heard of some kind of an arrangement with Buchla and Associates regarding bo
2008-04-29 by matthew carpenter
Hi, Just to clarify, I have found that phase reversal and continuous phase shifting is very useful when experimenting with, and 'tuning', audio feedback. I'm not entirely clear on the how but it's been an endlessly fruitful tool for unique timbre generation. I am able to wring in
2008-04-29 by ezra buchla
oh crap, that formatting makes no sense (thanks Y!G) On Mon, Apr 28, 2008 at 5:36 PM, ezra.buchla wrote: > in case anyone is still interested in this rather tangential topic, > here's some more OL action that went down... the short answer is no, the > 210e doesn't perform phase r
2008-04-28 by ezra.buchla
in case anyone is still interested in this rather tangential topic, here's some more OL action that went down... the short answer is no, the 210e doesn't perform phase reversal... > Re: 210e -- audio signal phase reversal? /// > doesn't produce delay, which is the essential compo
2008-04-28 by alt-mode
Yup, the system at AHNE was mine. It was a bit tight getting the three boats into the SKB rack but they did fit. It is quite a lightweight portable system in this configuration. I had been using the boats in a rack in the studio and I'm beginning to think that a portable system m
2008-04-28 by ezra buchla
yes; the rack ears are optional when you buy 4p boats. On Mon, Apr 28, 2008 at 2:35 PM, Richard Lainhart wrote: > Isn't that's what shown in this image from AHNE last weekend? > > http://www.flickr.com/photos/stretta/2444588070/in/set-72157604745340046/ > > > > hello, > > > > doe
2008-04-28 by Richard Lainhart
Isn't that's what shown in this image from AHNE last weekend? http://www.flickr.com/photos/stretta/2444588070/in/set-72157604745340046/ > hello, > > does anyone have any information about these? I have one of this SKB > pop up cases which in my fantasy I see filled with two 4 spa
2008-04-28 by ezra buchla
there is some confusion of terms. the paragraph below should read, "the AMPLITUDES of B and C..." etc. i don't think the conclusion is right. panning stuff around the quad outputs doesn't produce delay, which is the essential component of phasers, etc. fortunately there are sweet
2008-04-28 by ezra buchla
yeah, quadrature introduces a 90deg phase shift in an envelope. nothing to do w/ audio. btw, it's pretty easy to make a digital APF with almost-linear arbitrary phase response. combine a 1sample feedforward and 1sample feedback loop: y = a*x + x_last - a*y_last phase delay = p =
2008-04-28 by jjsynth
hello, does anyone have any information about these? I have one of this SKB pop up cases which in my fantasy I see filled with two 4 space boats with some Buchla modules in them... regards, joerg
2008-04-28 by tmeade1974
I found this in the archives: http://launch.groups.yahoo.com/group/200e/message/104 "You can also phase shift the filtered signal using spacial dynamics in the 227e. B and C are 90 degrees out of phase from A and D is 180 degrees out of phase from A. Mix the filtered signal back
2008-04-28 by nicholas_kent
Doesn't make much sense to me (But I don't own any modules). The 227e is a quad channel device. In general no one defaults audio as far as I know to 90 degree phase shifts to do quad. All you will wind up with is more potential of cancellation in an acoustic space. And 90 degrees
2008-04-26 by mritenburg
I might be wrong, but I have always assumed that on the 227e, positions A, B, C, and D are 90 degrees out of phase from one another. So C is 180 degrees out of phase from A and D is 180 degrees out of phase from B. Matt --- In 200e@yahoogroups.com, "Matt Carpenter" wrote: > > Hi
2008-04-26 by JB
Hello, I am selling my Lightning II, look here for more info: http://randomvoltage.com/sale.html Johan
2008-04-26 by Matt Carpenter
Hi all, I was just wondering if the 210e allows phase reversal of the audio signal or if phase reversal is possible via other means, specifically for the purposes of feedback/feedforward experimentation. Thanks! Matt
2008-04-23 by Chris Muir
On Apr 23, 2008, at 12:47 PM, jon schatz wrote: > 1) will the 222e rings work with lightning batons (and vice-versa)? > 2) what's the effective operational range of the 222e rings? this > page: I thing the ranges were optimized very differently. One for larger gestures from a dis
2008-04-23 by jon schatz
1) will the 222e rings work with lightning batons (and vice-versa)? 2) what's the effective operational range of the 222e rings? this page: http://buchla.com/lightning/descript.html says lightning supports 12' x 20' spaces; can the 222e rings do this as well? anxiously awaiting a
2008-04-23 by Stewart Moroney
Could someone post up clips of the 297 phase shifter please? I'm considering ordering one but I cant find any clips on-line. An example of it processing some external audio like an acoustic drum loop or something would be awesome! Stewart
2008-04-22 by JB
Take it easy and call him instead of using email. 2008/4/22, Kai Franz : > Since i paid the advanced Money for my System He is not answering on any email !? >
2008-04-22 by amnesia
VOIP him Kai Franz wrote: > > Since i paid the advanced Money for my System He is not answering on > any email !? > > ----- Original Message ---- > From: JB > > To: 200e@yahoogroups.com > Sent: Monday, April 21, 2008 11:13:01 PM > Subject: Re: [200e] Is Don in Holiday? > > I don'
2008-04-22 by Kai Franz
Since i paid the advanced Money for my System He is not answering on any email !? ----- Original Message ---- From: JB To: 200e@yahoogroups.com Sent: Monday, April 21, 2008 11:13:01 PM Subject: Re: [200e] Is Don in Holiday? I don't think so. I talked to him just a few days ago. 2
2008-04-21 by JB
I don't think so. I talked to him just a few days ago. 2008/4/21, Kai Franz : > Hi, > > i am trying to reach Don for the last 2 weeks. > Anyone know if he is in Holiday? > > I just love to check if my system get ready in Time. :-) > > > > > > > ___________________________________