Yahoo Groups archive
Messages
Page 117 of 564 · 28179 messages matched
2011-04-02 by eangman2000
Thanks for your reply mr Doepfer. Of course you have a lot of things cooking there. Just my little Dark Energy looks a bit lonely and needs a friend :P With hope that the Dark Matter is one of the first items on your todo to-do list. Erik --- In Doepfer_a100@yahoogroups.com, wrot
2011-04-01 by Bakis Sirros
few photos from the new PW studio: http://matrixsynth.blogspot.com/2011/04/ian-boddy-parallel-worlds-exit-strategy.html Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel
2011-04-01 by yahoo@doepfer.de
> What ever hapened to Dark Matter, the fabeled expansion of the > Dark Energy? I know it has been postponed a couple of times but I > was hoping to hear something about it now when the Dark Time is > all done and shipping... The Dark Matter is still on our to-do list. But I can'
2011-04-01 by yahoo@doepfer.de
> > Pay attention that you have to turn the pressure sensor "on" (details > > in the user's manual). > > If you refer to menu 2-2 not being set to "Off": Yes, it is set > to "Aftertouch" or "MIDI Controller". (I tried both) > > -Michael OK, t the pressure sensor is on. It's diffi
2011-04-01 by yahoo@doepfer.de
> Hello group, > > I dug out my R2M today and noticed, that the pressure CV (CV2) > seems to not work at all. The position (pitch) CV (CV1) as well > as the gate seem to work properly. > > I have tested the pressure with the MIDI settings "Aftertouch" > and "Controller" and fed t
2011-04-01 by eangman2000
What ever hapened to Dark Matter, the fabeled expansion of the Dark Energy? I know it has been postponed a couple of times but I was hoping to hear something about it now when the Dark Time is all done and shipping...
2011-04-01 by wentolin
--- In Doepfer_a100@yahoogroups.com, wrote: > Pay attention that you have to turn the pressure sensor "on" (details > in the user's manual). If you refer to menu 2-2 not being set to "Off": Yes, it is set to "Aftertouch" or "MIDI Controller". (I tried both) -Michael -- http://thn
2011-04-01 by wentolin
Hello group, I dug out my R2M today and noticed, that the pressure CV (CV2) seems to not work at all. The position (pitch) CV (CV1) as well as the gate seem to work properly. I have tested the pressure with the MIDI settings "Aftertouch" and "Controller" and fed the CV2 to the Pi
2011-04-01 by miguel
perfect condition, in madrid spain. price is 75 euro, excluding postage. here s a photo http://www.hispasonic.com/anuncios/modulo-analogue-solutions-vco/17820 more info http://www.schneidersladen.de/en/analogue-solutions-vco-2
2011-03-31 by yahoo@doepfer.de
> So in the following text (from the A-149-1 description) "Whenever > the rising edge of the input clock signal (Clk In) appears a new > random voltage is generated at the N+1 resp. 2N output" means 'at > the N+1 or 2N output'? The upper Clock Input of the module A-149-1 belongs
2011-03-31 by Florian Anwander
yahoo@doepfer.de schrieb: > most of the English A-100 user manuals have been proofreaded by Peter Forrest Maybe this collides with Peters attemps to learn french :-)))) Florian
2011-03-31 by yahoo@doepfer.de
> Please can someone tell me what is meant by "resp." which appears over > and over again on the Doepfer website and in the A-100 manual. I can > think of no english word for which "resp." might be an abbreviation > which would make sense in the contexts in which it is used. Matt
2011-03-31 by Florian Anwander
mfretton schrieb: > Thanks for the link. "Resp. and other non-existent English words" > So in the following text (from the A-149-1 description) "Whenever the rising edge of the input clock signal (Clk In) appears a new random voltage is generated at the N+1 resp. 2N output" means
2011-03-31 by mfretton
Thanks Dieter, and also Florian for the explanation. I'll have a look again at the A-100 manual, but encountered "resp." very often when I read it, and will let you know where the term occurs. I'll also read the manual with the understanding that "resp." should be read as 'respec
2011-03-31 by mfretton
Thanks for the link. "Resp. and other non-existent English words" So in the following text (from the A-149-1 description) "Whenever the rising edge of the input clock signal (Clk In) appears a new random voltage is generated at the N+1 resp. 2N output" means 'at the N+1 or 2N out
2011-03-30 by Nicholas Rejack
http://www.languagehat.com/archives/001173.php should clear up this very strange usage. On Wed, Mar 30, 2011 at 4:10 PM, York Luethje wrote: > > > Can you give a short example? > > _____ > > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im > Auftrag von
2011-03-30 by York Luethje
Never mind, found an example. It is an abbreviation for respective / respectively, although in the example its position in the sentence was German rather than English. _____ Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im Auftrag von Matt Gesendet: Mi
2011-03-30 by York Luethje
Can you give a short example? _____ Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im Auftrag von Matt Gesendet: Mittwoch, 30. März 2011 15:28 An: doepfer_a100@yahoogroups.com Betreff: [Doepfer_a100] "resp." ??? Please can someone tell me what is meant by
2011-03-30 by Matt
Please can someone tell me what is meant by "resp." which appears over and over again on the Doepfer website and in the A-100 manual. I can think of no english word for which "resp." might be an abbreviation which would make sense in the contexts in which it is used. Matt
2011-03-30 by Jilt van Moorst
Noticed a wire had come loose from the battery, got it working now. cheers Jilt van Moorst On Mar 30, 2011, at 5:28 PM, Jilt van Moorst wrote: > As the subject says, mine's silent (except for some high whining noise in the background) > > I thought the battery could need replacin
2011-03-30 by Jilt van Moorst
As the subject says, mine's silent (except for some high whining noise in the background) I thought the battery could need replacing, measured it and got 3.75, which is higher than it should be (3.6) I'm thinking batteries go lower in voltage when they go out, not higher? Could i
2011-03-30 by Bakis Sirros
DiN37 Exit Strategy CD album by Ian Boddy & Parallel Worlds (release date 31st of May 2011) information and track previews now on the DiN web site http://www.din.org.uk/din/node/379 Both Boddy & Sirros have a long, well documented love of analogue modular synthesisers and the org
2011-03-28 by NetPierre
Cool, thanks for the tip. It already was one of my favorite filter modules. I made an expansion module for the low-pass/bandpass modification info here : http://patchpierre.blogspot.com/search/label/A-127 I guess i have to expand my expansion module now... btw... feel free to che
2011-03-28 by Florian Anwander
Hi Denis Denis Gökdag schrieb: > Ahh, a new project for when I actually have some spare time ;-) I assume it is for you the same as for me: "Ah project number 1347 for when I actually have some spare time ;-)" Florian
2011-03-28 by Denis Gökdag
Hmmm, I guess you could maybe wire up an A-138-e quad three-way crossfader module to get SEM-style crossfading between filter modes for all three A-127 filters. The fourth crossfader could probably be modified to sum all three filters with a level control (or be left as-is to do
2011-03-28 by yahoo@doepfer.de
> How about a switch Dieter No problem. We did this several times but it causes additional charges because of the required working time and parts. Best whishes Dieter Doepfer
2011-03-27 by Florian Anwander
Hi Ikke ikke wrote: > How about a switch Dieter The problem is, that you would need a real three position rotary switch. Which eats space on the frontpanel and is expensive. But already three jumpers would be great. Florian
2011-03-27 by ikke
How about a switch Dieter 2011/3/27 Florian Anwander > > > Hi, > > If you own an A-127, then you that it can be changed from band pass to > low pass with internal jumpers. > > Now: If you have an A-127 Version 3 (the version is written on the > pcbs), then it is also possible to
2011-03-27 by Florian Anwander
Hi, If you own an A-127, then you that it can be changed from band pass to low pass with internal jumpers. Now: If you have an A-127 Version 3 (the version is written on the pcbs), then it is also possible to get a high pass signal too. You simply have to feed pin 14 of IC1 to th
2011-03-26 by dancemachine
great, thanks for the info. are there service docs available or anything so that I may complete this modification? I have a 154 and 152 here waiting for me to hook them together :) On Mon, Feb 7, 2011 at 3:48 AM, wrote: > > > > i love the control of the 154, specifically the VC l
2011-03-25 by Matt
I'm selling a couple more Doepfer modules as I'm steadily replacing specific functionality with more flexible modules. Both in 'as new' condition and 80% of the Thomann price. A-138c Polarizing Mixer GBP 39 A-145 LFO1 GBP 39 Shipping from London UK is in addition - GBP 6.50 for U
2011-03-25 by Josef
Hi, the track Haendel_Sonatina_HWV582 on youtube: http://www.youtube.com/watch?v=1ITkdXCtasw Enjoy! Josef www.modular-planet.de [Non-text portions of this message have been removed]
2011-03-23 by yahoo@doepfer.de
> -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von mfretton > Gesendet: Dienstag, 22. März 2011 18:02 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a100] Re: CV/Gate bus connection cables question
2011-03-22 by mfretton
Thank you Dieter. I also understand that two bus boards can be connected by using a 16 pin ribbon cable between unused headers on each board - do you see any problems with that method? Matt --- In Doepfer_a100@yahoogroups.com, wrote: > > > No reply here but, for future seekers af
2011-03-21 by yahoo@doepfer.de
> Hi Laury, > > > > The modification on the Doepfer pages is a fixed modification > and would ... > I know that. But I think the hint here in this mail list should be only: > "Go look at this URL. If you are a skilled person you will understand > the technical details and will fi
2011-03-21 by Florian Anwander
Hi Laury, > The modification on the Doepfer pages is a fixed modification and would ... I know that. But I think the hint here in this mail list should be only: "Go look at this URL. If you are a skilled person you will understand the technical details and will find the solution
2011-03-21 by yahoo@doepfer.de
> No reply here but, for future seekers after the same information, > James Husted of Synthwerks replied on another forum that the bus > rails can be connected between the CV & Gate pins of any unused > headers using the A-100BC cable. > > A doepfer cable long enough to reach fro
2011-03-21 by Elby Designs
Hi, The question was "can I have a power supply that works on 2 voltages" "Is there a reasonable way to have a 6u suitcase frame work with both 230 and 115 volts? IE, I want to be able to play it in Europe and the States. From checking the previous discussions, I understand that
2011-03-21 by Florian Anwander
Hi Laurie > Easy, get a (build) a power supply that uses a transformer with dual > primary windings (2 x 115VAC) and a suitable mains selector switch which > simply puts the windings in parallel or series. It is not necessary to build a new one: http://www.doepfer.de/faq/a100_faq
2011-03-21 by yahoo@doepfer.de
> Hi, > > I've recently received my second A-143-9 quadrature LFO. I'll be > using the two for creating FM spectra a lot as this module has > such a beautifully clean sinewave and the combination with the > A-132-2 is ideal for FM index modulation. > > In this context it would be
2011-03-20 by Phil
Title says it all. Looking for offers, thanks.
2011-03-20 by Tim
I think this could be done easily enough, by feeding a linear FM CV through a resistor into the correct point in the expo converter, in a similar way to that shown for the same effect on the A-110 schematic. (A precautionary protection diode would also be needed to protect the po
2011-03-20 by mfretton
No reply here but, for future seekers after the same information, James Husted of Synthwerks replied on another forum that the bus rails can be connected between the CV & Gate pins of any unused headers using the A-100BC cable. A doepfer cable long enough to reach from the top to
2011-03-19 by achtung_999
Lovely idea... On Sat, Mar 19, 2011 at 12:40 PM, Denis G'kdag wrote: > > > Hi, > > I've recently received my second A-143-9 quadrature LFO. I'll be using the > two for creating FM spectra a lot as this module has such a beautifully > clean sinewave and the combination with the A-
2011-03-19 by Denis Gökdag
Hi, I've recently received my second A-143-9 quadrature LFO. I'll be using the two for creating FM spectra a lot as this module has such a beautifully clean sinewave and the combination with the A-132-2 is ideal for FM index modulation. In this context it would be interesting to
2011-03-18 by Elby Designs
Easy, get a (build) a power supply that uses a transformer with dual primary windings (2 x 115VAC) and a suitable mains selector switch which simply puts the windings in parallel or series. This is how it used to be done in the old days and being linear is Best Regards Laurie Bid
2011-03-18 by Chris Henkel
...i was just in contact with Immanuel and he might have saved 'some' working C++-code somewhere - just in case someone is interested... 2011/3/18 Chris Henkel > ...there was that belgian guy - Immanuel - who wrote a bigger chunk of an > Mac OS X capable editor a couple of years
2011-03-18 by watson
looking for money or trade. interested in yamaha fs1r or jomox xbase888 wiard module is in prefect brand new shape jomox has seen some use but works perfect, some rack rash, a slightly bend rack ear and a few scratches on top taking offers depending on location, trade and time fr
2011-03-18 by Chris Henkel
...there was that belgian guy - Immanuel - who wrote a bigger chunk of an Mac OS X capable editor a couple of years ago... 2011/3/16 johan.severinsson > Are there any news about a new editor? > ...i remember, because just to test the software i bought a A-112 back then...unfortun
2011-03-18 by achtung_999
Hey there, Anyone in the Dutch west coast area: Tonight I'll be playing with my project Ungrund at Cafe De Vinger in The Hague. My setup consists of a Eurorack setup centered around a matrix mixer module... Event starts in an hour from now... address: Bagijnestraat 252511 CK Den