Yahoo Groups archive
Messages
Page 119 of 564 · 28179 messages matched
2011-03-07 by Julian
Im testing out a new idea with eurorack blanks, which, im hoping, some people here might be interested in... I have a selection of blanks, and the idea is that, no matter what you want on the panel (assuming its possible!) ill engrave it for a flat rate fee. There are catches tho
2011-03-07 by Bakis Sirros
i think this happens when one of the two power supply voltages (+12 and -12 volts) does not reach the module. do all the other modules, that are connected in the same PSU, work fine? of course, Dieter is the man to answer this correctly... thanks, Bakis. Bakis Sirros - Parallel W
2011-03-06 by Bruno
Hi list, My a-147 VCLFO seems totally frozen since Saturday morning: suddenly no more signal went out whereas two of the three leds remained permanently turned on (but did't flicker any more...) If I switch power off and then on, two different leds came on, but I still don't have
2011-03-06 by Hyperdust
Hi, just spent a happy Sunday afternoon recording this track for youtube. http://www.youtube.com/watch?v=3x4dNyilz_4 Very pleased with the sound. I have the Moog Voyager Old School which has great CV ins & outs. It's LFO's sync fine to the Doepfer system. I've just bought 2 very
2011-03-05 by Tobias Schmitt
All prices in �. Akai Headrush Looper 95 Phonic Firefly 302+ Firewire Audio Interface 95 Analogue Solutions GT8 Gate Sequencer 103 Analogue Solutions HH88 � 808 Hihat 103 Analogue Solutions TM88 � 808 Tom 51 DIY 3HE Baugruppentr'ger 2,5mm 84TE 25 DIY 3HE Baugruppentr'ger 2,5mm 84
2011-03-04 by mfretton
With the addition of the A-154 it's a powerful sequencer --- In Doepfer_a100@yahoogroups.com, "Alan" wrote: > > Thank you for the reply Dieter, > I just hadn't read the page through thoroughly. As Monroe indicates, the A-155 may be more appropriate for my needs. > Cheers, > Alan
2011-03-04 by yahoo@doepfer.de
> I have the A-111-5 in my rack, which is the eurorack equivalent > of the Dark Energy, and wondered if there is also a eurorack > version of the Dark Time sequencer? If not are there any plans to > make one? > Thanks, > Alan Sorry - that's not possible. Please refer to the note
2011-03-04 by Alan
Thank you for the reply Dieter, I just hadn't read the page through thoroughly. As Monroe indicates, the A-155 may be more appropriate for my needs. Cheers, Alan --- In Doepfer_a100@yahoogroups.com, wrote: > > > I have the A-111-5 in my rack, which is the eurorack equivalent > >
2011-03-04 by Alan
Ah! Thanks Monroe. I just hadn't done my homework. --- In Doepfer_a100@yahoogroups.com, Monroe Eskew wrote: > > Is it different enough from a155 to matter? > > On Thu, Mar 3, 2011 at 3:32 PM, Alan wrote: > > > > > > > I have the A-111-5 in my rack, which is the eurorack equivalen
2011-03-04 by Monroe Eskew
Is it different enough from a155 to matter? On Thu, Mar 3, 2011 at 3:32 PM, Alan wrote: > > > I have the A-111-5 in my rack, which is the eurorack equivalent of the Dark > Energy, and wondered if there is also a eurorack version of the Dark Time > sequencer? If not are there any
2011-03-03 by Alan
I have the A-111-5 in my rack, which is the eurorack equivalent of the Dark Energy, and wondered if there is also a eurorack version of the Dark Time sequencer? If not are there any plans to make one? Thanks, Alan
2011-03-03 by Florian Anwander
Hello Marie > Is this group really an appropriate place for WTB adverts from known dealers? minimel makes music on his own too. Florian
2011-03-03 by Shrewsbury Marie
Is this group really an appropriate place for WTB adverts from known dealers? ________________________________ From: mm123 ah To: doepfer_a100@yahoogroups.com Sent: Wed, March 2, 2011 7:39:05 PM Subject: [Doepfer_a100] Wanted: Sequencer, clock dividers and clock sequencers if any
2011-03-03 by mfretton
You make it seem like he's a crack dealer! Mini is cool and why shouldn't he post a WTB here - he's probably more passionate about analogue synths than most of us. Matt --- In Doepfer_a100@yahoogroups.com, Shrewsbury Marie wrote: > > Is this group really an appropriate place for
2011-03-03 by cliffmaniam
I've been lurking here for awhile, sorry first post is forsale, but that's life sometimes.. Clearing out a couple items in Portland, Oregon USA. Doepfer A-132-2 Quad VCA, in fine shape. Expert Sleepers ES-1, use with Silent Way software in excellent condition - only used to seque
2011-03-02 by mm123 ah
if anyone's selling, please email us with info at minime123 at onebox dot com (and not this hotmail address as i dont check this account often) thanks mini - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - VINTAGE SYNTH DEALER -We Buy, Sell & Trade Analog Synths -Huge S
2011-03-02 by yahoo@doepfer.de
> Hello, > > one of the two 12V adapters from my A100DIY2 has a broken pin. > I've emailed Doepfer for a replacement, but I see that the DIY2 > is discontinued. If I can't get a replacement from Doepfer, I'm > wondering if I can use any other 12V adapter, or is it important > to
2011-03-02 by Jilt van Moorst
Hello, one of the two 12V adapters from my A100DIY2 has a broken pin. I've emailed Doepfer for a replacement, but I see that the DIY2 is discontinued. If I can't get a replacement from Doepfer, I'm wondering if I can use any other 12V adapter, or is it important to use two exactl
2011-03-01 by richstudio83
Suitcase in very good condition, fully working, selling due to buying larger case. MAQ latest version, again good condition, fully working. Sensible offers please, maybe trades/px for analogue gear/interesting modules. thanks
2011-02-28 by George P. Macklin
Welcome Ryan! Cheers, George P. Macklin www.granularmatter.com Eurorack Modules www.toppobrillo.com On Sun, Feb 27, 2011 at 10:19 PM, Ryan Main wrote: > > > activating membership. > > [Non-text portions of this message have been removed] > > > [Non-text portions of this message h
2011-02-28 by Richard Scott
activating reception w-e-l-c-o-m-e >>>> :) On 2/28/11 6:19 AM, Ryan Main wrote: > activating membership. > > [Non-text portions of this message have been removed] > > -- my website is full of sounds and sights http://richard-scott.net
2011-02-28 by York Luethje
Welcome _____ Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im Auftrag von Ryan Main Gesendet: Montag, 28. Februar 2011 01:20 An: doepfer_a100@yahoogroups.com Betreff: [Doepfer_a100] new member activating membership. [Non-text portions of this message ha
2011-02-28 by Ryan Main
activating membership. [Non-text portions of this message have been removed]
2011-02-27 by Matt
I'm having a re-think and clearing out some modules. A-126 Frequency Shifter with prototype A-126A external QVCO adapter, see http://www.doepfer.de/A100_QVCO.htm for details. GBP 170 A-141 VCEG (like new and only briefly racked). GBP 60 A-178 Theremin (very good with the usual ra
2011-02-27 by Bakis Sirros
http://www.youtube.com/watch?v=Nm0tQYSwcp4 the track 'Fibre' from my 'Interconnected' project with Ingo Zobel (of DRON, Signalform). Released in December 2010 in the 2CD compilation 'Radio Lunatica Z2' from VIM Records. lots and lots of modulars and analogues used in this track o
2011-02-26 by Fredrik
Ah, great, that's just what I was looking for, thanks a bunch Florian! /Fredrik --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Fredrik schrieb: > > > Hello > > > > I can play a regular scale fine, but not tune it to other synts. > > > > So its the R5 change then
2011-02-25 by Lars
Hi! Does anyone know if it is safe to "drive" a EHX (electroharmonix) Memoryboy Delay through the expression jack with CV from a Doepfer LFO? I know you can use CV with the pedal but I think it handles it like a moogerfooger pedal. I know the moogerfooger is safe since it switche
2011-02-25 by Florian Anwander
Fredrik schrieb: > Hello > > I can play a regular scale fine, but not tune it to other synts. > > So its the R5 change then? There is the internale trimmer P6, which is intended to set the basic center tuning. * unscrew the A110 from the rack * pay carefully attention, that the P
2011-02-25 by Fredrik
Hello I can play a regular scale fine, but not tune it to other synts. So its the R5 change then? Regard F --- In Doepfer_a100@yahoogroups.com, "Sidney" wrote: > > Fredrick, have you noticed if you can play a regular musical scale when using your A-110 or you having trouble just
2011-02-24 by Florian Anwander
Hello Sidney schrieb: > Hello Fredrick. There are potentiometers on the back side of > the module you may need to adjust. These do not have to do anything with the amount of the fine tuning!!!! Don't touch!!! Florian
2011-02-24 by Sidney
Fredrick, have you noticed if you can play a regular musical scale when using your A-110 or you having trouble just to play the A-110 in tune with other synths? At the moment don't touch anything, as Florian told. --- In Doepfer_a100@yahoogroups.com, "Fredrik" wrote: > > Thanks >
2011-02-24 by Fredrik
Thanks I did indeed do a search first, but found nothing :-) F --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hello Fredrik > > > > Is it possible to fine-tune the A-110 more than the front knob allows? > If I would be bad boy I'd say: "check the archives, we an
2011-02-23 by Florian Anwander
Hello Fredrik > Is it possible to fine-tune the A-110 more than the front knob allows? If I would be bad boy I'd say: "check the archives, we answer this twice a month", but I am a nice one today, so.... :-) -------- Original Message -------- Subject: Re: [Doepfer_a100] A-110 fin
2011-02-23 by Fredrik Stolpe
Hello Is it possible to fine-tune the A-110 more than the front knob allows? Right now I have the tuning knob turned all the way clockwise but I cant tune it correctly to other gear. It is controlled by the dark energy, CV1 out on DE is connected to CV1 in on A-110. Regards /Fred
2011-02-23 by dougt55
I have some CEM3340s available if you need a new one. Doug, synthparts.com --- In Doepfer_a100@yahoogroups.com, wrote: > > > hello, > > one of my high end vcos doesnt stay in pitch and fluctuates when > > dormant. does doepfer insure modules? what should i do? also my > > slew li
2011-02-21 by yahoo@doepfer.de
> hello, > one of my high end vcos doesnt stay in pitch and fluctuates when > dormant. does doepfer insure modules? what should i do? also my > slew limiter doesnt work with my high end vcos. please help?! > thank you, From the distance a diagnosis is difficult. Maybe the CEM3340
2011-02-21 by dennis henderson
hello, one of my high end vcos doesnt stay in pitch and fluctuates when dormant. does doepfer insure modules? what should i do? also my slew limiter doesnt work with my high end vcos. please help?! thank you,
2011-02-18 by kpgdenver
> Simply add a capacitor in parallel to C1 (1nF). Should be C3.
2011-02-18 by Sidney
Monroe, you are right. Because I am using mainly the web to read and write messages, sometimes I post a message, and then post the same message with some modifications and delet the previous one on the Users Group page at Yahoo. I noticed I sent the two similar messages on the di
2011-02-18 by York Luethje
Sidney, I was just pointing out that your way of addressing Dieter Doepfer was not polite. Being polite is obviously not a requirement; you can address him any way you like. It's just that in an online forum specifically dedicated to Doepfer products one would expect participants
2011-02-18 by gabu_004
Hello, Selling my Nord Modular G2 Engine 800 USD comes with rack ears, power cord and USB cable buyer pays paypal fees, shippingand insurance if you want insurance if interested, please email me at: kakihara.004@gmail.com Thanks g.
2011-02-17 by Monroe Eskew
I don't think it's a bug. If you are signed up to get the posts in your email, then yahoo should send them right away. (If not now, when?) And then if you go in and edit/delete your post on the yahoo site, then what is the email program supposed to do? Email the revision is the o
2011-02-17 by Sidney
Monroe, As it has been stated, the double message is Yahoo's bug, a computer bug. So please, at least be polite next time you send me a message. Thank you, Sidney. --- In Doepfer_a100@yahoogroups.com, Monroe Eskew wrote: > > Why are you sending 2 copies of every email? Please sto
2011-02-17 by Justin Owen
Hello, I think the modular part of my studio re-shuffle is almost done so this will be the last group of modules I'll be selling for now: A-110 Standard VCO - http://bit.ly/gNsJkq A-117 Digital Noise / 808 Source - http://bit.ly/gzJ2dT A-121 Multimode Filter (VCF2) - http://bit.l
2011-02-17 by Bakis Sirros
hi Florian, than is yahoo's fault i am afraid... i hope they fix it. btw, i am already using the microwave I in my new music. but the access programmer is really very very useful in easily fine tuning the sounds as you want them. thanks, best regards, :-) Bakis. Bakis Sirros - Pa
2011-02-17 by Florian Anwander
Hi Bakis > please, can you do something about the problem of sending each message TWICE in the list? once is enough. it is not only Sidney. Also your mail appeared twice at my mail account (not on the web)! It happens with around a third of all postings and some days it does not
2011-02-17 by yahoo@doepfer.de
> Dieter. I successfully changed the A-190-2 Q1 resistor by placing > a BC547B transistor and now the gate is working. But I think that > the CV V/V output is not working. Is there any piece I can > replace to fix this? > > Thank you, > > Sidney Probably not only the transistor h
2011-02-17 by Bakis Sirros
hi Sidney, please, can you do something about the problem of sending each message TWICE in the list? once is enough. thanks, best regards, :-) Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www.
2011-02-17 by York Luethje
He isn't. One email is addressed to Mr. Doepfer and one to Mr. Dieter. -----Ursprüngliche Nachricht----- Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im Auftrag von Monroe Eskew Gesendet: Donnerstag, 17. Februar 2011 02:27 An: Doepfer_a100@yahoogroups.c
2011-02-17 by Monroe Eskew
Why are you sending 2 copies of every email? Please stop that. On Wed, Feb 16, 2011 at 10:56 PM, Sidney wrote: > > > Mr. Doepfer. I successfully changed the A-190-2 Q1 resistor by replacing it > with a BC547B transistor and the gate output is now working. But I think > that the C