Yahoo Groups archive
Messages
Page 165 of 564 · 28179 messages matched
2009-11-24 by yahoo@doepfer.de
> thanks a lot Dieter, thats what I wanted to hear > I going ot buy NE5532 right now, > no time for sending PLL, Japan / Australia tour in next week, > I cant wait :) > > all the best > robert piotrowicz Good luck with your tour Dieter Doepfer
2009-11-24 by robert piotrowicz
The A-196 has 3 integrated circuits: 74HC4046 (PLL circuit), CD4051 (electronic switch) and NE5532N (Dual OpAmp). The NE5532 is next to the bus connector. All circuits are standard and should be available in your local electronic shop. Of course you may send in the module for rep
2009-11-24 by yahoo@doepfer.de
> Hi > > The 'Delay' pot in unit 2 of my A-143-2 has failed (it only works > if I oull it towards me while turning - otherwise it sticks at > fully on). Can someone (Dieter?) please tell me what replacement > pot (type/value) I should buy? > > Many thanks > > Rich The value is 1M
2009-11-24 by richyho@btopenworld.com
Hi The 'Delay' pot in unit 2 of my A-143-2 has failed (it only works if I oull it towards me while turning - otherwise it sticks at fully on). Can someone (Dieter?) please tell me what replacement pot (type/value) I should buy? Many thanks Rich
2009-11-24 by yahoo@doepfer.de
> hello all > > I just got serious troble with PLL module > it started with damage of middle section > position switch stoped to work > > I put module out and tried to see if all parts are > corectly setled and after moments > it seems that chip close to power ribon connection >
2009-11-24 by Bakis Sirros
Dieter any help...? i guess this means this chip of the PLL module should need replacing...or maybe send your module back for repair... btw, indeed the A196 PLL is a really 'special' module. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner
2009-11-24 by robert piotrowicz
hello all I just got serious troble with PLL module it started with damage of middle section position switch stoped to work I put module out and tried to see if all parts are corectly setled and after moments it seems that chip close to power ribon connection has something with t
2009-11-23 by yahoo@doepfer.de
> Okay, thanks! At any rate the generation of simultaneous sine/cos > of equal amplitude is the most important thing in the specific > application I'm working on. So the module is a must-have, looking > forward to it. If you look only for simultaneous sine/cos of equal amplitude
2009-11-23 by yahoo@doepfer.de
> that's a great price for the TKS. > > but, will this price include the sequencer controller rack too though? no, that's only for the TKB > or, if not, what would be, roughly, the price of the sequencer > controller rack? it's too early for a rough estimate. Best wishes Dieter D
2009-11-23 by Bakis Sirros
hi Dieter, that's a great price for the TKS. but, will this price include the sequencer controller rack too though? or, if not, what would be, roughly, the price of the sequencer controller rack? thanks for the info, best regards, :-) Bakis. Bakis Sirros - Parallel Worlds / Inter
2009-11-23 by cameron
Okay, thanks! At any rate the generation of simultaneous sine/cos of equal amplitude is the most important thing in the specific application I'm working on. So the module is a must-have, looking forward to it. --- In Doepfer_a100@yahoogroups.com, wrote: > > > At any rate I'm inte
2009-11-23 by yahoo@doepfer.de
> At any rate I'm interested in phase quadrature, and the status of > the module. > > One thing was not clear to me when reading introductory > literature to the module: does it also return the cosine of (any) > input signal? To speak the truth I don't understand what you mean wi
2009-11-23 by Florian Anwander
decaying_sine schrieb: > Bakis, > Did you post at Muff's about this for members who may not regularly login to the yahoo groups, but might be interested in logging in to vote? To read the inquiry for vote you only have to be subscribed to the list. To be able to vote you have to
2009-11-23 by yahoo@doepfer.de
> i guess it would be cheaper, maybe 600 euros for both the TKS and > the Controller rack or even cheaper....? > > any help Dieter...? Provided that the TKB will be manufactured the planned price range is Euro 200...300. Best wishes Dieter Doepfer
2009-11-23 by cameron
The search system here doesn't seem to work? At any rate I'm interested in phase quadrature, and the status of the module. One thing was not clear to me when reading introductory literature to the module: does it also return the cosine of (any) input signal?
2009-11-23 by cameron
Another vote for microtuning via uploading Scala .scl files via USB! That would be fantastic. --- In Doepfer_a100@yahoogroups.com, wrote: > > > -----Ursprüngliche Nachricht----- > > Von: Doepfer_a100@yahoogroups.com > > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von glabbeur
2009-11-22 by Bakis Sirros
hi Pierre, the poll is referring to the black touch plate keyboard and the separate sequencer controller rack. Not to the old design from 2001 which was an integrated touchplate keyboard and sequencer in one grey unit. i hope this is clear enough? thanks, best regards, :-) Bakis.
2009-11-22 by Pierre
Hi, The poll refers to an old draft, with a least two designs. Witch one is concerned by this poll ? I purchased an A-198 a month ago. With the addition of the A-155 & A-154 pair, I guess it's pretty close to a TKB. Last, I think an A-100 TKB would be great if it's mounted in the
2009-11-22 by Bakis Sirros
hi Brian, good idea. i'll do that. thanks, best regards, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace
2009-11-22 by phono 1337
the adjustment procedure can be found here http://www.doepfer.de/home_e.htm scroll down a bit to find it (in english), i would recommend reading all of the adjsutment section before doing it :) Paul On Sun, Nov 22, 2009 at 6:44 PM, propane23 wrote: > > > I seem to have an issue w
2009-11-22 by decaying_sine
Bakis, Did you post at Muff's about this for members who may not regularly login to the yahoo groups, but might be interested in logging in to vote? Brian --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > hi list, > > still only 41 votes in the TKS poll... > > please,
2009-11-22 by propane23
I seem to have an issue with the tuning on one of my A110 VCOs. Normally when i'm going to play i let my modular warm up for about 20 or 30 mins and then tune the oscs, and they stay in tune fine, but one of the VCOs had it's in tune point right at the top end of the tuning pot.
2009-11-22 by gabu_004
Hello y'all, I'm parting away with some of my gear: Apogee Ensemble Soundcard. I will let it go at 1300 USD + shipping I have it for less than 1 year Not used a lot since the MOTU came back home and with volta and cv control, it really took the side. Doepfer A140: 66 USD + shippi
2009-11-22 by gabu_004
Hello y'all, I'm parting away with some of my gear: Apogee Ensemble Soundcard. I will let it go at 1300 USD + shipping I have it for less than 1 year Not used a lot since the MOTU came back home and with volta and cv control, it really took the side. Doepfer A140: 66 USD + shippi
2009-11-22 by Phil
Thanks for getting back on my question. I've been busy and so haven't had time to reply. Many thanks for the help. Cheers, Phil --- In Doepfer_a100@yahoogroups.com, wrote: > > > Hi there, > > > > My Doepfer modular arrived today and it's great. I do have one > > question though.
2009-11-22 by Bakis Sirros
i guess it would be cheaper, maybe 600 euros for both the TKS and the Controller rack or even cheaper....? any help Dieter...? Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallel
2009-11-22 by Herwig
What would be the advantage of a touch keyboard in opposite to a normal keyboard? I don't see any. ciao herw [...] > > --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > > > hi list, > > still only 41 votes in the TKS poll... > > > > please, keep voting, it will only ta
2009-11-22 by toneklang65
Well i would be interested, depending on the price though 700 euroish...... Jesper --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > hi list, > > still only 41 votes in the TKS poll... > > please, keep voting, it will only take 5 seconds of your time. > > please vote,
2009-11-22 by toneklang65
Well i would be interested, depending on the price though 700 euroish...... Jesper --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > hi list, > > still only 41 votes in the TKS poll... > > please, keep voting, it will only take 5 seconds of your time. > > please vote,
2009-11-20 by yahoo@doepfer.de
> -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von glabbeur > Gesendet: Donnerstag, 19. November 2009 19:59 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a100] Microtuning for A-190-3 ? > > > Hell
2009-11-20 by Bakis Sirros
hi list, still only 41 votes in the TKS poll... please, keep voting, it will only take 5 seconds of your time. please vote, even if your vote would be 'no' or 'probably not'. every vote is helpful. we need at least 100 votes for a poll to be of important help for Doepfer. voting
2009-11-20 by yahoo@doepfer.de
> for a couple weeks i have been trying to troubleshoot a problem > ive had with the a190. first i just recorded a song > (www.myspace.com/noirethemusic) > using the midi out from protools as the clock and note value. then i > tried to start another song and the clock was exactly
2009-11-19 by Simon Christensen
I'm selling the MIdi to CV converter, The Expressionist from Encore Electronics.My price is 380 Euro.I bought it directly from Encore Electronics and there is nothing wrong with it.Included in the price is an adaptor which makes The Expressionist usable in Europe. (This adaptor i
2009-11-19 by dennis henderson
for a couple weeks i have been trying to troubleshoot a problem ive had with the a190. first i just recorded a song (www.myspace.com/noirethemusic) using the midi out from protools as the clock and note value. then i tried to start another song and the clock was exactly in opposi
2009-11-19 by Simon
The story is that I tried to post a post (!) - but I just got an error message all the time....So I tried DF.aøclækøæslvj ølakj v And it worked! Thanks for the perfect answer. Simon --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > ??? > > Bakis Sirros - Parallel World
2009-11-19 by glabbeur
Hello Dieter ! Since the A-190-3 will have an USB port and a LCD it would be a great addition to be able to load microtuning files ( Scala ) Info about the format here : http://www.huygens-fokker.org/scala/scl_format.html http://www.huygens-fokker.org/scala/help.htm#mappings 99,9
2009-11-19 by Bakis Sirros
??? Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk www. musicamaximamagnet
2009-11-19 by dennis henderson
for a couple weeks i have been trying to troubleshoot a problem ive had with the a190. first i just recorded a song (www.myspace.com/noirethemusic) using the midi out from protools as the clock and note value. then i tried to start another song and the clock was exactly in opposi
2009-11-17 by Bakis Sirros
yes, a video demo of the TKS prototype would be indeed great. Dieter...? btw, i have voted 'Yes' in the poll, becuase i think that it would be a really usefull device regardless if one will use it for more standard chromatic playing, or for triggering steps (and freely tunable 'k
2009-11-17 by Monroe Eskew
I'd like to respond to some of these points. On Tue, Nov 17, 2009 at 11:37 AM, metafoetus2002 wrote: > (1) Marrying a traditional keyboard layout and a TKB input means that > the TKB has to have significantly more steps and according knobs in order to > make up what seems to be t
2009-11-17 by Bakis Sirros
hi Jan, ok, thanks for caring to explain in detail the reason of your vote. best regards, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/
2009-11-17 by metafoetus2002
The last sentence (about the sync bus) is of course wrong for chaining TKB, as it offers a solution to add more rows to a TKB, but not more steps. Sorry for the confusion, Jan-Hinnerk --- In Doepfer_a100@yahoogroups.com, "metafoetus2002" wrote: > (6) But most importantly, a 25 st
2009-11-17 by metafoetus2002
Hi, this is the first time I am participating in a poll, because an Eurorack TKB is something that I'd really like to have, so thanks for setting up the poll. But I voted "no", as I would not buy the a product based on the concept shown on http://www.doepfer.de/a100tkb.htm. My re
2009-11-17 by propane23
Or more precisely, 2x A120 filters with a A134 crossfading between them: http://www.youtube.com/watch?v=0AZAO_rbjJw May contain traces of arse...
2009-11-17 by Florian Anwander
http://www.doepfer.de/a100_man/a100m_e.htm "...To assemble the modules in the frame M3x6 oval-head screws with cross recess (DIN7985) are used...." Nick schrieb: > Here's an easy question. What is the specification for the standard screws for mounting modules? I'm sure the inform
2009-11-17 by Nick
Many thanks Florian. Nick --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > http://www.doepfer.de/a100_man/a100m_e.htm > "...To assemble the modules in the frame M3x6 oval-head screws with > cross recess (DIN7985) are used...." > > Nick schrieb: > > Here's an easy
2009-11-17 by Nick
Here's an easy question. What is the specification for the standard screws for mounting modules? I'm sure the information must be in the forum somewhere, but a search on 'screws' pulls up, inter alia, pretty much every posting offering modules for sale. Cheers, Nick
2009-11-17 by Florian Anwander
Hello Stuart > i've got an a119 midi interface controlling an a111 vco here, but the pitch is wavering according to the speed of an lfo, although the lfo is only connected to the bus board. an unpatched envelope produces the same thing, a change in pitch as long as the gate is hi
2009-11-17 by grimshaw_stuart
yep, that was it. morphing filter, subharmonic generator and multitap delay plus the usuals is too much for the old power supplies. first time, though. thanks florian.
2009-11-17 by grimshaw_stuart
hi, i've got an a119 midi interface controlling an a111 vco here, but the pitch is wavering according to the speed of an lfo, although the lfo is only connected to the bus board. an unpatched envelope produces the same thing, a change in pitch as long as the gate is high. anyone