Yahoo Groups archive
Messages
Page 265 of 564 · 28179 messages matched
2008-03-10 by Florian Anwander
Hi David > the positive supply goes to the 7809 with a cap either side between the positive and gnd and the 7809 grounded on one pin? yes. > Are the caps anything special i.e. tantalums? For the filtering caps - I do not know how they are called in english. I'd say: polycarbonat
2008-03-10 by David Salter
Thanks Florian, So just to make sense of the ASCII drawing; the positive supply goes to the 7809 with a cap either side between the positive and gnd and the 7809 grounded on one pin? Are the caps anything special i.e. tantalums? Many thanks again David David Salter Senior Consult
2008-03-10 by Florian Anwander
Hi David two possibilities: 1.) an adaptor to the powerbus of the A-100 +12V--+-7809--+---o +9v in | | | out === | === Florian, or anybody really but I know Florian has done this, > > I want to build a Roland tuner pedal into my modular - I intend to re > case it, and I want to p
2008-03-10 by David Salter
Florian, or anybody really but I know Florian has done this, I want to build a Roland tuner pedal into my modular - I intend to re case it, and I want to power if off the modular's PSU rather than keep taking the panel out and changing batteries. Is there a schematic for a little
2008-03-09 by Florian Anwander
Hi Stu > i got a message saying that CTL3D.DLL couldn't be found. no options, > like searching the net, the hard disk or anything else were offered. > is there something that i need to do which is obvious to someone > experienced in windows? You need a crash course in solving pro
2008-03-09 by Stu Grimshaw
ha ha! okay, you got me :) but, you know what i'd do if i were selling hardware that relied software that relied on a component that has disappeared from the os used by 90% of the planet's computer users? I'D MENTION IT IN BIG FAT LETTERS SOMEWHERE VERY CLOSE TO THE DOWNLOAD. tha
2008-03-09 by Stu Grimshaw
hi group, okay, i'm not going to ask for a crash course (no pun intended) in windows and its ways of doing things, but maybe i'm within grasping distance, so.. > The loader will work without problem as a Windows95 application (the > drehbank editor is also a Win95 application and
2008-03-09 by Florian Anwander
Stu Grimshaw wrote: > thanks florian. does that mean that it does work, could work or should > work but doesn't ? :] Thats how software always is. :-) The loader will work without problem as a Windows95 application (the drehbank editor is also a Win95 application and it works wit
2008-03-09 by Denis Gökdag
one reply to both of your posts :-) i can see your point about a "less access to individual grains, more complex results on a single (small) module" approach. generating a typical grain "cloud" would be a lot of modules and patching with my approach....but then what i do if i wan
2008-03-09 by superstandardsuperstandard
Hi group, hello to everybody this is my first post. I tried to upload to the A-112 trough a Mac with a windows XP (running on Parallels). Everything crashed (XP, Parallels, Finder...). So if somebody got that managed, I'm very much interested. Wasn't there a thread about someon
2008-03-09 by Stu Grimshaw
thanks florian. does that mean that it does work, could work or should work but doesn't ? :] stu
2008-03-09 by Bakis Sirros
the two A110's, A120, A122, A175, A116 are now sold. the following 3 modules are still available: A170 slew, A123 highpass, A185 bus access. price is 60% of new price, payment via paypal. (add 5% paypal charge and shipping costs) thanks, best regards, :-) Bakis. Bakis Sirros - Pa
2008-03-09 by Richard Scott
Hi all I got this unit from Florian a couple of weeks ago. I am selling it on. I am in Berlin and would prefer if someone picks it up. Florian's description is below, its in very good condition as you'd expect. It sounds fine, and theLFO modulation is very nice, but it would real
2008-03-09 by Florian Anwander
Hi Stu > i read that the doepfer programme for loading wavetables into the a112 > is okay for windows95. can anyone tell me if it works for xp? XP has a kind of classic mode for the application. It is not as in OSX that a real other OS is started, but the executables are started
2008-03-09 by Stu Grimshaw
i read that the doepfer programme for loading wavetables into the a112 is okay for windows95. can anyone tell me if it works for xp? i have a mac that will boot xp, but before i go through all the hassle of installing the interface drivers, getting to understand xp etc, i though
2008-03-09 by Florian Anwander
Hi all, the pitch shifter is sold. Florian Stu Grimshaw wrote: > hi florian, > > i'm interested in buying it. > > (sorry that this isn't offlist, i got an autoreply) > > stu > > > > > Yahoo! Groups Links > > > >
2008-03-08 by Stu Grimshaw
hi florian, i'm interested in buying it. (sorry that this isn't offlist, i got an autoreply) stu
2008-03-08 by Florian Anwander
Hi, I am selling a "Boss RPS-10 Pitchshifter Delay". It requires a regulated 9V powersupply (wall wart). I can provide the correct cable, so you can modify any Walwart. Features: The delay and the pitchshifter have reverse functions. The pitchshifter can follow an external audio
2008-03-08 by floppy
i think my messages dont arrive at 22host24, can you please check your spamfilter and allow this adress ? regards floppy Julian schrieb: > > >>i would nevertheless be interested to hear from anyone who knows a > midi to cv interface that can allocate, say, four voices. > > polyda
2008-03-08 by Bakis Sirros
hello, i have too many of them, so i am selling some (its not that i do not like their sound!): all work fine of course: price will be 60% of new current price (see doepfer website): A110 VCO (two of them) A175 VC PHASER A170 SLEW LIMITER A116 VC WAVEFORM PROCESSOR A120 24db LOWP
2008-03-08 by Laurie Biddulph
The PolyDAC does all this and it will soon be available in a EuroRack format http://www.elby-designs.com/polydac/polydac-about.htm Best Regards (Mr) Laurie Biddulph Phone: +61 (0)2 4340 0938 Mobile: 0400 257 645 Elby Designs ABN: 70 022 727 605 http://www.elby-designs.com This e-
2008-03-07 by Florian Anwander
Hi Mikael > i'm interested in buying A-100 mini system and A-155 sequencer > so i'd like to know if i could run A-100 and A-155 both, > with Nuendo program? Pc (Windows XP service pack1) If you have MIDI/CV interface each sequencer program which is able to handle MIDI, will be ab
2008-03-07 by Florian Anwander
Hi Dieter > will be available as a module. We still have to define the different modes > (only a few will be available, e.g. 8 x 1 voice monophonic with pitch and > velocity CV, 4 x 1 voice polyphonic with 4 CVs per voice and the same for > polyphonic modes). It will be not free
2008-03-07 by Florian Anwander
Hi Stuart > florian, i kind of half agree with you. to make your most interesting > patches polyphonic would cost a fortune. but that's ignoring the > cheapo and/or lofi sounds that are waiting to be discovered by someone > daft enough to put the time in. I did not tell him not t
2008-03-07 by gasp_uleg
-by "density" i mean "distance between grains", which could go from almost total overlap of the grains when a high frecuency clock is used with long grains. when using a lower frecuency clock (lfo range) then gaps between the grains could appear if the frecuency of the clock is l
2008-03-07 by gasp_uleg
i totally agree with you, denis, that to leave as much external control as possible would not only lower the strain on the dsp but would also allow to experiment a lot with these controls. but at the same time that implies the absolute need more modules to control even its most b
2008-03-07 by Julian
>>i would nevertheless be interested to hear from anyone who knows a midi to cv interface that can allocate, say, four voices. polydac. designed by paul maddox, marketed by oakley for a while, now by elby designs... -- I am using the free version of SPAMfighter for private users.
2008-03-07 by dingfutzer
Looking for an A143-2. Have these for trade or sale: Plan B Model 15 VCO v.1 (unused) $235, Doepfer A113 Subharmonic Generator $235. With ribbon cables and screws. Also: BL3208 2048 Stage BBD for A188 $12 All are in excellent condition. Thanks - Bill
2008-03-07 by David Salter
I would be interested if anyone on this board had the capability to design and cost out this module. It would be interesting to know if it's commercially viable to build. David David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)2
2008-03-07 by Denis Gökdag
> > To be able to apply a similar - though in reality probably a cut > down - process in real time with in a modular system would be > wonderful. > Not cut-down at all! Imagine taking the CV's for grain parameters from a vocoder analysis section, and using sequencers and VCOs for
2008-03-07 by David Salter
I understand the process (if not all the technical stuff) as I use Metasynth on my Mac and the end results are amazing. To be able to apply a similar - though in reality probably a cut down - process in real time with in a modular system would be wonderful. david David Salter Sen
2008-03-07 by Richard Scott
seriously, the fact that ideas and designs get hammered out on this list and that doepfer actually listen to users needs and builds a fair prortion of what we discuss is great. Part of loving modulars is the playing and the sound, but part is the planning, thinking, design... its
2008-03-07 by Bakis Sirros
yes, indeed. i have been lost in this detailed discussion and you guys (D&G) seem to really dig deep... so, a granular proccesor/generator module would be great. :-) best regards, Bakis. --- David Salter wrote: > D&G, > > How about you guys getting together, producing a > spec an
2008-03-07 by David Salter
D&G, How about you guys getting together, producing a spec and building it so the rest of can enjoy the pleasures of granular synthesis in a modular :o) David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7542 2402 | (m) 079905
2008-03-07 by Denis Gökdag
> > grains are not fixed samples, they are bits of samples put togheter or > more correctly: a long sample is smashed into smaller samples > (grains). > > grains parameters (position, pitch, lenght, density and dynamics) > should > be controllable independently from those of the
2008-03-07 by Mikael Delta
hi there hope all is well my name is Mikael Delta, i'm a musician and i live in Athens Greece i'm interested in buying A-100 mini system and A-155 sequencer so i'd like to know if i could run A-100 and A-155 both, with Nuendo program? Pc (Windows XP service pack1) Look forwrd to
2008-03-07 by David Salter
Stu, In answer to your question about midi/cv interfaces that support poly mode. My Kenton Pro 4 does that. Not sure about their existing range but maybe worth a look. david David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7
2008-03-07 by Stu Grimshaw
> > > four voices with four cv's would be great. but pitch bend and modwheel > > would be common to all voices > > only in the poly modes, not in the mono modes ! ach ja. sorry, i was temporarily made stupid by the joy of anticipation (for want of a better translation of vorfreud
2008-03-07 by hardware@doepfer.de
> four voices with four cv's would be great. but pitch bend and modwheel > would be common to all voices only in the poly modes, not in the mono modes ! > you intend to release this as a module? yes. Best wishes Dieter Doepfer
2008-03-07 by hardware@doepfer.de
> Hi Dieter, thanks for the info. i agree one step at a time is good :) > Am i right in thinking that the MCV4 is monophonic control? m Yes. It has one Gate, one Pitch CV, one Velocity CV, one Aftertouch CV and one free assignable Controller CV (e.g. for volume or modulation). Be
2008-03-07 by michael901096
Thanks Dieter. m :)
2008-03-07 by hardware@doepfer.de
> i would nevertheless be interested to hear from anyone who knows a > midi to cv interface that can allocate, say, four voices. We are working on such an interface. Probably with 16 CV outputs and much easier to use than the MCV24 (and much cheaper). The hardware is ready (was u
2008-03-07 by Stu Grimshaw
splendid news dieter! four voices with four cv's would be great. but pitch bend and modwheel would be common to all voices, and would only need two outputs, meaning four voices with three outputs (presumably note, velocity and poly aftertouch), common outputs for pitch and mod an
2008-03-07 by michael901096
Thanks for the info Stu. reg m:)
2008-03-07 by Stu Grimshaw
--- In Doepfer_a100@yahoogroups.com, "michael901096" wrote: > > Hi Dieter, thanks for the info. i agree one step at a time is good :) > Am i right in thinking that the MCV4 is monophonic control? m > yep, the mcv is monophonic, the other cvs are for velocity and whatever. stu
2008-03-07 by michael901096
Hi Dieter, thanks for the info. i agree one step at a time is good :) Am i right in thinking that the MCV4 is monophonic control? m
2008-03-07 by michael901096
Hi Stu, i have the Doepfer MCV4 but i 'm not sure whether this can operate more than one note at a time. What is confusing me is that there is only 1 gate input, but there are four cv's available (able to control 4 VCO's?). I am presuming 1 gate on signal equals only 1 note (unle
2008-03-07 by Stu Grimshaw
i would nevertheless be interested to hear from anyone who knows a midi to cv interface that can allocate, say, four voices. florian, i kind of half agree with you. to make your most interesting patches polyphonic would cost a fortune. but that's ignoring the cheapo and/or lofi s
2008-03-07 by michael901096
Hi folks, thanks to everyone for info regarding my queries :) Florian: the question re polyphonic Doepfer was more for interest than practice...yep def the cost of a mddle class car lol ;). What i had in my head was that multiple gate leads would trigger the notes via ADSR's, and
2008-03-06 by David Westling
Hello group, I have one Analogue Solutions VCO ($80) and a Doepfer A-137 ($120) up for sale. Both are in excellent condition. Studio use only. The ASol VCO is about two years old, the A-137 is less than a year old. Both bought new. Terms--cashier's check or money order. Payment m