Yahoo Groups archive
Messages
Page 315 of 564 · 28179 messages matched
2007-04-11 by musicagenera
hello is tehre any idea when it will finnaly comes out? is this architecture already closed? what is really good that all inputs and outs go an down of the panel - I hope it gets easier to the knobs I would say I prefere 4 cv pan in main module than filter sections but this will
2007-04-11 by ilanode
If hooked up correctly: No. Only diff. is that those modules are no longer connected to the gate and cv signals on the bus board. --- In Doepfer_a100@yahoogroups.com, "jeswa" wrote: > > The Analogue Haven description for the 16 pin to 16 pin cable reads: > > "Make sure that the m
2007-04-11 by jeswa
The Analogue Haven description for the 16 pin to 16 pin cable reads: "Make sure that the module in question uses all 16-pins on the PCB side (such as the A-110, A-111, A-140, A-142 and others)" Is there any harm in using these cables with a 10 pin bus connector, assuming it's hoo
2007-04-10 by jeswa
I'm planning on making a handful of DIY Euro modules and a few mods/add-ons to my Doepfer modules but have no idea where to get the aluminum from. I am not selling these, they are only for me. I know that Doepfer/AH sell blank panels but they're not exactly the sizes I need, and
2007-04-10 by Anton Coops
> all. Anyway, I'm quite pleased with the A-110 and A-111. I'm still > thinking of purchasing a Moog ring modulator (MF-102) which seems to > give value for money. Comparing the A-114 and the MF-102 I think it's fair to say that the MF-102 sounds warmer. Does anybody know how Bob
2007-04-10 by Florian Anwander
Hi Wim > Yes I have that same feeling. The thing is quite expensive also. I > think Moog tries to attract customers by advertising it as "a real Moog > VCO" but I really don't think it sounds like a vintage Moog VCO after > all. Anyway, I'm quite pleased with the A-110 and A-111.
2007-04-10 by Florian Anwander
Hi Wim > Filter in combination with the A-100. How are your feelings towards > this new Moog product as to combining it with your A-100? In opposite to other Moogerfoogers I think this one doesn't bring any feature, which couldn't be done easily with doepfer modules. With a A-110
2007-04-10 by Wim
Hi Florian, Ok, I see... that's where the envelope follower comes in! Indeed a good idea to try that with my existing A-100 set-up. Thanks and best regards, Wim --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hi Wim > > > Yes I have that same feeling. The thing i
2007-04-10 by Wim
Hi Florian, Yes I have that same feeling. The thing is quite expensive also. I think Moog tries to attract customers by advertising it as "a real Moog VCO" but I really don't think it sounds like a vintage Moog VCO after all. Anyway, I'm quite pleased with the A-110 and A-111. I'
2007-04-10 by Wim
Hello to all, Has anyone of you any idea if the new Moogerfooger 107 FreqBox could be integrated into a Doepfer system? I already use an MF-101 Lowpass Filter in combination with the A-100. How are your feelings towards this new Moog product as to combining it with your A-100? Li
2007-04-10 by Michael Wagner
Ever since I own an A-121, I suspected, that its output is quite low in comparison to the plain oscillator output level. Yesterday I made a comparison between the A-121 and the A-105, that I received recently. I routed a sawtooth from the A-111 to both of their inputs. I tweaked
2007-04-10 by Michael Wagner
On 4/6/07, hardware@doepfer.de wrote: > The CV/Gate keyboard will be available with metal case only in the 4 octave > version. All other versions (2, 3 and 5 octaves) are only available as > OEM/DIY products, i.e. only keybed + electronics without case. The 2 octaves > version sh
2007-04-09 by Silas Johansen
I don't have the A-188-2, but I've had similar problems with tweaking a filter to almost self-oscillate. The solution I found was to patch an A-176 manual CV source into resonance CV and use the fine control on the CV-source to make exact adjustments. From the product page of the
2007-04-09 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "Silas Johansen" wrote: > > I don't have the A-188-2, but I've had similar problems with tweaking a > filter to almost self-oscillate. The solution I found was to patch an A-176 > manual CV source into resonance CV and use the fine control on
2007-04-09 by selfoscillate
hello ernst, the feedback-behaviour is caused by the bbd chip. small bbd's with only a few stages (for example 128 or 256) go into self-oscillation more smoothly, a bit like a vcf. bbd's with more stages (for example more than 2048) go into self-oscillation a lot faster, when a c
2007-04-08 by ErnstKarel
Okay, so I'm trying to do Karplus-Strong synthesis now using a 188-2. The main problem I'm having is in getting the right amount of feedback without getting overwhelming feedback. There is only the very very tiniest amount of distance on the knob between the two, meaning one has
2007-04-06 by Bakis Sirros
hello William, thank you for your nice comments! glad to see my group's members giving me some feedback! best regards, :-) Bakis. --- William Soraparu wrote: > Very good Bakis!!! Your CD is most amazing. > > Thank you! > > Bakis Sirros wrote: > ok! poll is on!! > vote for this po
2007-04-06 by William Soraparu
Very good Bakis!!! Your CD is most amazing. Thank you! Bakis Sirros wrote: ok! poll is on!! vote for this poll!!! it only lasts for 3 weeks. it closes on 27th of April. best regards, Bakis. --- hardware@doepfer.de wrote: > > Are the CV/Gate - Keyboards pictured on the > Doepfer-H
2007-04-06 by jalmari3
I got a custom A-138c with hand picked resistors. Excellent service by Doepfer! Best regards Jari Jokinen --- In Doepfer_a100@yahoogroups.com, wrote: > > > The amplification range of my A-138c is not -1 to +1, but something > > like -0.9 to +0.9. According to the manual, the rang
2007-04-06 by Bakis Sirros
ok! poll is on!! vote for this poll!!! it only lasts for 3 weeks. it closes on 27th of April. best regards, Bakis. --- hardware@doepfer.de wrote: > > Are the CV/Gate - Keyboards pictured on the > Doepfer-Homepage really > > going to be produced in four- and two-octave > versions,
2007-04-06 by hardware@doepfer.de
> The following Doepfer_a100 poll is now closed. Here are the > final results: > > POLL QUESTION: Would you prefer Doepfer to release the current > (ready) Monophonic version of the TKB, or would you prefer a > polyphonic version of the TKB?(the polyphonic version is not > built
2007-04-06 by hardware@doepfer.de
> Are the CV/Gate - Keyboards pictured on the Doepfer-Homepage really > going to be produced in four- and two-octave versions, and, if so, > when and at what prices, can we expect them to be available? > > Greetings, > -Michael The CV/Gate keyboard will be available with metal ca
2007-04-06 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: Which Case Color of the A100 CV/Gate keyboard (4 octave version) do you prefer? black or silver grey? (only one case color is possible) o Black o Silver Grey To vote, please visit the following web pag
2007-04-05 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Would you prefer Doepfer to release the current (ready) Monophonic version of the TKB, or would you prefer a polyphonic version of the TKB?(the polyphonic version is not built yet, so it wil
2007-04-05 by Michael Wagner
Hello there, Are the CV/Gate - Keyboards pictured on the Doepfer-Homepage really going to be produced in four- and two-octave versions, and, if so, when and at what prices, can we expect them to be available? Greetings, -Michael
2007-04-04 by selfoscillate
> I also can't wait for A-149-3. I use the A-149 is many patches and the > additions that the new module may have will be very good. yes, i agree regarding the a149/3. it is not that you cannot already rebuild the module functionality with existing modules, but for that a whole b
2007-04-03 by Tommy DOG
I hope this comes out soon. This looks like it will be useful. I also can't wait for A-149-3. I use the A-149 is many patches and the additions that the new module may have will be very good. TD
2007-04-02 by hardware@doepfer.de
> Thanks Dieter. > > Now how can I get hold of them in the UK? > > david > > David Salter I don't know. Please contact MFB. Dieter
2007-04-02 by David Salter
Thanks Dieter. Now how can I get hold of them in the UK? david David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 Get the latest news at Reuters.com ________________________________ From
2007-04-02 by David Salter
Hi Florian, I certainly like the look of the triple DCO and the video scope (great for live shows - use with a big TV) Shame there are no audio examples yet. I hope they are Euro rack format rather than Frac rack? David David Salter Senior Consultant PSG Reuters Messaging: david.
2007-04-02 by hardware@doepfer.de
> -----Ursprungliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Florian Anwander > Gesendet: Montag, 2. April 2007 16:48 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a100] MFB (Manfred Fricke) Modules for A10
2007-04-02 by Florian Anwander
Hi were some of you at the Messe? Did you see / hear the MFB modules and does anyone know, whether these Modules are compatible with the A100? http://www.mfberlin.de/Produkte/Module/SEQ-01/SEQ-01e/seq-01e.html http://www.mfberlin.de/Produkte/Module/OSC-01/OSC-01e/osc-01e.html The
2007-04-02 by hardware@doepfer.de
> Hello everybody, > I've just receive those two modules and i'm surprise they don't have > the possibility to take the gate info directly on the bus. > This can make sens for the A 143.2 which can be use as a super-Lfo, > but i don't understand the reason for the A-141 ( there i
2007-04-01 by patate_le_mage
Thanks a lot, Ingo, I'll try the DIY solution. Patrick --- In Doepfer_a100@yahoogroups.com, "ilanode" wrote: > > Hello Patrick, the 10 pin connectors have 2 rows of identical contacts: > 1x -12V; 3x Gnd and 1x +12V per row = 10 pins. The 16 pin connectors > add to this: 1x 5V; 1x
2007-04-01 by ilanode
Hello Patrick, the 10 pin connectors have 2 rows of identical contacts: 1x -12V; 3x Gnd and 1x +12V per row = 10 pins. The 16 pin connectors add to this: 1x 5V; 1x CV (from the bus board); 1x Gate (from the bus board)- again per row. I.e. there is no way to get the Gate from the
2007-04-01 by freq_divider
Hello, Quite a while ago there was an interesting discussion about a 'tendency mask' (message 8696, 8964 etc.). I was thinking that the upcoming digital module might maybe perform such a task. Perhaps even offering a choice between tendency mask and behaving just like a compresso
2007-03-31 by patate_le_mage
Thanks Ingo, I don't totally understand what you say, my english is not very good, On the A-141 there is a 10 pin connector instead of a 16 pin as usual for connection with the bus. Have I to modify the cable or have i to buy one ? Patrick --- In Doepfer_a100@yahoogroups.com, "se
2007-03-31 by selfoscillate
hello patrick, yes, it is possible, you just need a customized power cable (the gate from the bus has to be connected to the switch contact of the gate input socket, thats all). best wishes ingo --- In Doepfer_a100@yahoogroups.com, "patate_le_mage" wrote: > > Hello everybody, > I
2007-03-30 by charles graef
I'd just get the bus access module, which will let you patch from the bus to the gate input. --Chuck > -----Original Message----- > From: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of patate_le_mage > Sent: Friday, March 30, 2007 1:28 PM > To:
2007-03-30 by patate_le_mage
Hello everybody, I've just receive those two modules and i'm surprise they don't have the possibility to take the gate info directly on the bus. This can make sens for the A 143.2 which can be use as a super-Lfo, but i don't understand the reason for the A-141 ( there is probably
2007-03-30 by Florian Anwander
Hello Patrick, Touched by Sound is a very reliable trader with high knowledge on modular gear. You may check their ebay account (touched-by-sound). They have 4099 evaluations with 99.9 percent. This is one of the best rating for professional sellers. Also Thomann is a great shop.
2007-03-30 by buchla300
--- In Doepfer_a100@yahoogroups.com, "patate_le_mage" wrote: > > Hello everybody. > I live in France and the only shop i know to buy modules is MESI wich > i serious, but they are a little bit expensive and very slow to > delivery because they have not stock. > I would try to buy
2007-03-29 by Richard
also Thomman's in Germnay stock many doepfer modules and use credit cards - and they are cheap! and a three year warranty http://www.thomann.de/gb/index.html EMIS (uk) are very good and knowledgable but less cheap http://www.aues21.dsl.pipex.com/ in this day and age a bank transf
2007-03-29 by Michael Wagner
Hello Patrick, If you consult the Doepfer website, you'll see that in France, there's also http://www.apak.fr selling Doepfer modules and their prices seem to be quite adequate if you consider shipping charges etc. I've never had personal expereince with TBS annd can't tell you a
2007-03-29 by patate_le_mage
Hello everybody. I live in France and the only shop i know to buy modules is MESI wich i serious, but they are a little bit expensive and very slow to delivery because they have not stock. I would try to buy modules in another shop, i find another wich is TOUCHED BY SOUND in Germ
2007-03-26 by David Salter
That is the keyboard I use with mine, you'll see a picture in my gallery "david salter" David David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 Get the latest news at Reuters.com ______
2007-03-25 by Bakis Sirros
Hello all, first the review: "A sound wave, dark and droning hops in opening of Beneath Fear. A variegated intro, which lets emerge a fine piano melody, stiff in a dense sound fauna. This soft tune shares its harmonies with a cloud of tonalities as varied as the fear can have its
2007-03-24 by Bakis Sirros
ok, but you have to be carefull with Roland's +15 volts Gate outs when you connect it (although unlikely...) to a154, a155, a152, a150, a151. right Dieter? best regards, Bakis. --- hardware@doepfer.de wrote: > > Hi folks, > > > > Is it possible to use a ROLAND 184 Keyboard as a >
2007-03-24 by hardware@doepfer.de
> Hi folks, > > Is it possible to use a ROLAND 184 Keyboard as a master keyboard for > the a100? Yes, it has 1V/Oct CV outputs and voltage trigger (it's ~ the keyboard section of the Jupiter 4 without the voice boards). Best wishes Dieter Doepfer
2007-03-24 by jalmari3
I downloaded the Corel Draw file, that contains all A-100 module front panels: http://www.doepfer.de/a100_man/A100_System.cdr Now I should "activate "magnetic auxiliary lines" to align the front panels at the right positions within the frame." How is this done in Corel Draw? Best