Yahoo Groups archive
Messages
Page 74 of 564 · 28179 messages matched
2013-03-15 by yahoo@doepfer.de
> Hi Dieter, > > Not sure how close to the CGS design this is re: power but any > thoughts on if I could run it on a +/-15V system? > > Thanks > > David The main circuit is identical to the CGS. There are only some minor changes that do not affect the main circuitry. I think it w
2013-03-15 by david.salter@thomsonreuters.com
Hi Dieter, Not sure how close to the CGS design this is re: power but any thoughts on if I could run it on a +/-15V system? Thanks David From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of yahoo@doepfer.de Sent: 13 March 2013 15:19 To: Doepfer_a1
2013-03-14 by Bakis Sirros
http://www.doepfer.de/a1712.htm Bakis ________________________________ From: Peter Sedin To: Doepfer_a100@yahoogroups.com Sent: Thursday, March 14, 2013 1:17 AM Subject: Re: [Doepfer_a100] Re: Some A-100 News where is these pictures? 2013/3/12 thomas_escure > ** > > > That's very
2013-03-13 by Peter Sedin
where is these pictures? 2013/3/12 thomas_escure > ** > > > That's very good news ! > Thank you especially for the improved A-130, A-131 and A-135. > Also the A-171-2 is going to be great, though I find the graphics to be a > little confusing. Are the "curves" pictures really nec
2013-03-13 by Bakis Sirros
great news about the improvement of the audio Quality of the A130/131 VCA modules! well done Dieter! also, can't wait for the A-157 Trigger Sequencer (mini-Schaltwerk) modules! regarding the Volt/Oct input of the A171-2 (Serge) Slope module, as far as i know, the Dual Transient G
2013-03-13 by thomas_escure
--- In Doepfer_a100@yahoogroups.com, wrote: > > > One more question : in exp. mode, do the "CV up" and "CV down" > > pots control the slew shape even if there is no control voltage > > at the "CV up" and "CV down" inputs ? > > Yes. But unfortunately it also has some influence to
2013-03-13 by yahoo@doepfer.de
> One more question : in exp. mode, do the "CV up" and "CV down" > pots control the slew shape even if there is no control voltage > at the "CV up" and "CV down" inputs ? Yes. But unfortunately it also has some influence to the frequency in LFO mode (i.e. when you change the shap
2013-03-13 by thomas_escure
--- In Doepfer_a100@yahoogroups.com, wrote: > > > That's very good news ! > > Thank you especially for the improved A-130, A-131 and A-135. > > Also the A-171-2 is going to be great, though I find the graphics > > to be a little confusing. Are the "curves" pictures really necessa
2013-03-13 by yahoo@doepfer.de
> That's very good news ! > Thank you especially for the improved A-130, A-131 and A-135. > Also the A-171-2 is going to be great, though I find the graphics > to be a little confusing. Are the "curves" pictures really necessary ? > I think there's already a lot of info on little
2013-03-12 by thomas_escure
That's very good news ! Thank you especially for the improved A-130, A-131 and A-135. Also the A-171-2 is going to be great, though I find the graphics to be a little confusing. Are the "curves" pictures really necessary ? I think there's already a lot of info on little panel spa
2013-03-12 by ienni23
> We will show the prototype of the new version of the A-190-8 USB/Midi-to-Sync > Interface at the Musikmesse in Frankfurt. These modules will be available > about summer 2013. YAAAY!!!! this particular one is great news, and exactly what i've been needing and didn't even realize
2013-03-12 by yahoo@doepfer.de
Dear members, here are some A-100 news: The small version of the multiple A-180 is available in April 2013 (2 HP only, name: A-180-2) The A-130 (linear VCA) is now delivered with a precision VCA circuit (SSM2164) instead of the CA3080. The new A-130 is DC-coupled. The A-131 (expo
2013-03-12 by yahoo@doepfer.de
> My a-152 only works in the last 4 steps. > It doesnt goes to,the first ones at all. > Maybe i should try and replace ome of the ic's? > > Cheers, > > Dennis Maybe the processor is defective (one address line not working) but that's only a guess. You may replace the processor bu
2013-03-12 by Dennis Verschoor
My a-152 only works in the last 4 steps. It doesnt goes to,the first ones at all. Maybe i should try and replace ome of the ic's? Cheers, Dennis -- Music at: http://www.mono-poly.nl [Non-text portions of this message have been removed]
2013-03-12 by Peter Sedin
very nice blog! thing is I really don't now what a capacitor is more then something electric and in this case what makes it possible to delay/gates.. so where can i find such a thing? and also what one if i like from 0,2 to 2 seconds (or close to that somewhere). Thanks Pierre! p
2013-03-11 by Peter Sedin
I want more control over the timing and have no need for the long delaytime this module can produce.. Perfect would be something from 2ms to 2 seconds.. on doepfer website i read this is easy.. dont know what capacitor is suited tho.. anyone have done this? peace.. -- Mvh Peter H
2013-03-11 by NetPierre
hi Peter, The Doepfer DIY page tells that doubling the capacitor value also doubles the time or period, when the capacitor value is increased tenfold even the time or period increases tenfold. Standard value of the capacitors in the A-162 is 10uF, so the choice is yours. feel fre
2013-03-06 by antonio@antoniograzioli.it
Hi, I am selling my big modular in pieces. some modules are on ebay. If you are interested in something specific, please contact me, I have a bout 100 modules (also some Analogu Systems and Analogue Solutions) and everything will have to go in the following months. I know I haven
2013-03-04 by Danny Budts
Thanks again Dieter, but that's excactly what I did....maybe a bad contact or, anyway, I'm playing again :-) Cheers, ------------------------------------------------------ Danny Budts info@syndromeda.be www.syndromeda.be ----- Original Message ----- From: yahoo@doepfer.de To: Doe
2013-03-04 by yahoo@doepfer.de
> Hi, > Yes, that's exactly what I meant. But I've solved the problem. > In my upper row, the VCO's were located as was the ADSR, in the > lower row the 190-2. I had connected the two rows (bus boards) > with that small Gate/CV cable and that did not worked, as I > described befo
2013-03-04 by Danny Budts
Hi, Yes, that's exactly what I meant. But I've solved the problem. In my upper row, the VCO's were located as was the ADSR, in the lower row the 190-2. I had connected the two rows (bus boards) with that small Gate/CV cable and that did not worked, as I described before. Now I ha
2013-03-04 by yahoo@doepfer.de
> Thanks for the fast answer Dieter, but the 190-2's are in > independent cases - no connections. > If I turn up the VCA gain until I hear a constant audible sound I > can hear it is responding to the whole frequency range. Sorry - but I have problems to understand the issue. Do
2013-03-04 by Danny Budts
Thanks for the fast answer Dieter, but the 190-2's are in independent cases - no connections. If I turn up the VCA gain until I hear a constant audible sound I can hear it is responding to the whole frequency range. Cheers, ------------------------------------------------------ D
2013-03-04 by yahoo@doepfer.de
> I have reassembled my Doepfer modular and now I have a strange > behavier with one of my two A-190-2's. > I only have about 4 octaves of CV. > When I choose C1 as reference it goes from A1 to C6, when I > choose C0 it goes from C1 to C5. I do not have this behavier with > my ot
2013-03-04 by Syndromeda
I have reassembled my Doepfer modular and now I have a strange behavier with one of my two A-190-2's. I only have about 4 octaves of CV. When I choose C1 as reference it goes from A1 to C6, when I choose C0 it goes from C1 to C5. I do not have this behavier with my other A-190-2,
2013-03-02 by William Belote
Gentlemen, Put me down as interested in either prime or odd. Bill --- In Doepfer_a100@yahoogroups.com, "Nick" wrote: > > > > Hi Martin > > The idea behind dividers using prime numbers is that they would be arhythmic, good at non-repeating patterns. > I've had a reply from Nichola
2013-03-01 by Nick
Hi Martin The idea behind dividers using prime numbers is that they would be arhythmic, good at non-repeating patterns. I've had a reply from Nicholas at erthenvar, who said, "I'll add you to a list for a Fibonacci. I have assembled units but I'm missing 1 piece which is in stora
2013-03-01 by Martin Klang
I make a vc divider: http://www.rebeltech.org/modules/logoi/ It only goes up to 1/32 though, unless you reprogram it. What did you want to achieve? Martin On 28 Feb 2013, at 20:31, Nick wrote: > I guess nothing came of this. There was discussion of fibonacci and > prime dividers
2013-02-28 by Nick
I guess nothing came of this. There was discussion of fibonacci and prime dividers and I came across these from Erthenvar - the fibonacci has not been released yet.Are there any other alternatives available?Cheers, Nick [Non-text portions of this message have been removed]
2013-02-28 by Peter Sedin
I like to code some modules with different color knobs, what should i look for`? -- Mvh Peter H.K Sedin [Non-text portions of this message have been removed]
2013-02-28 by Danny Budts
Thanks very much Dieter, now it's all clear. Have a nice day, ------------------------------------------------------ Danny Budts info@syndromeda.be www.syndromeda.be ----- Original Message ----- From: yahoo@doepfer.de To: Doepfer_a100@yahoogroups.com Sent: Thursday, February 28,
2013-02-28 by yahoo@doepfer.de
> Thanks for the fast response Dieter, I've read this part before, > now I have read it again (oh yes...I RTFM always ;-)) and still > do not get it. You don't talk about this cable in the manual - I > still do not understand, me being dummy......Please help again. > Cheers, > Da
2013-02-28 by Oknot Olukes
A-127 triple resonant filter id amazing for perc sounds. Either by pinging the filter or selfoscillating filter followed by VCA. You can get some very cool perc sounds out of it and it has three outputs which you can tune differently to achieve variations. Really love this filter
2013-02-28 by david.salter@thomsonreuters.com
Hi All I have a few modules for sale. If your interested please respond off-list. Thanks Livewire - Dalek Modulator £200 Elby - CGS735 Synthacon Filter - £110 Analogue Systems - RS-50 Shaper/Trigger/DC Shifter - £70 Analogue Systems - RS-70 Inverter/Preamp - £70 Pulp Logic - Mono
2013-02-28 by Peter Sedin
thanks for your tips zoe.. love those nice sounds.. and that most be the coolest version of that song i ever heard! you rock.. peace out. 2013/2/28 Zo� Blade > ** > > > Any self-resonating filter (A-105, A-106-1, etc) or oscillator sweeping > down makes an excellent kick drum. Ba
2013-02-28 by Zoë Blade
Any self-resonating filter (A-105, A-106-1, etc) or oscillator sweeping down makes an excellent kick drum. Band pass filtered noise (A-106-5 for example) is good for snares, especially with a spring reverb *before* the VCA to make it sound a little more organic and varied. For hi
2013-02-28 by Peter Sedin
what do you guys use for making snippy/snappy perc sounds? yep the envelopes is useful here also :) but what filter(s)? -- Mvh Peter H.K Sedin [Non-text portions of this message have been removed]
2013-02-28 by Zyntetix
You can use it as a dummy cable to disable the hipass mode. /Jonas On Feb 28, 2013, at 12:08 PM, Syndromeda wrote: > Thanks for the fast response Dieter, I've read this part before, now I have read it again (oh yes...I RTFM always ;-)) and still do not get it. You don't talk abou
2013-02-28 by yahoo@doepfer.de
> Yesterday I have received my A-106-1. It came with a short > patchcable. Is this meant for a special purpose on the filter? > Cheers & thanks, > Danny RTFM (page 9, right column) :-) Best wishes Dieter Doepfer
2013-02-28 by Syndromeda
Thanks for the fast response Dieter, I've read this part before, now I have read it again (oh yes...I RTFM always ;-)) and still do not get it. You don't talk about this cable in the manual - I still do not understand, me being dummy......Please help again. Cheers, Danny --- In D
2013-02-28 by Syndromeda
Yesterday I have received my A-106-1. It came with a short patchcable. Is this meant for a special purpose on the filter? Cheers & thanks, Danny
2013-02-27 by yahoo@doepfer.de
> I have looked at the Doepfer DIY page and did some web searching > but have found no posted schematics or mod diagrams. Basically I > want to mod a A-138 mixer to give gain if that is easily done. I > would assume it is a simple resistor change in the feedback loop > of the las
2013-02-27 by Bob S.
Check my eBay listings. This one is Doepfer module compatible: # 281032685751 (just put the number in the search box) Bob El segundo, CA Sent from my iPad On Feb 26, 2013, at 10:30 AM, Kai Niggemann wrote: > I bought them at the Hornbach hardware store in Germany -- just take one
2013-02-26 by danyu100
Electret capsules seem like a low power and cheap way to generate CV. I was wondering if anyone had experience using them? The "problem" with them when used for audio is that you have to use a capacitor to block DC. :) It seems like you could use them almost in the opposite way a
2013-02-26 by Kai Niggemann
I bought them at the Hornbach hardware store in Germany -- just take one screw along and hold it next to the ones you find there. I bought something like 100 screws for 3 EUR and felt like I was still paying quite a lot...;) On 20.02.2013, at 14:52, Peter Sedin wrote: > Hi guys h
2013-02-26 by James Husted
I have looked at the Doepfer DIY page and did some web searching but have found no posted schematics or mod diagrams. Basically I want to mod a A-138 mixer to give gain if that is easily done. I would assume it is a simple resistor change in the feedback loop of the last stage op
2013-02-25 by York Luethje
Well, Rudy sent that second mail warning that his account got hacked. Happens. From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of Bakis Sirros Sent: Monday, February 25, 2013 1:56 PM To: Doepfer_a100@yahoogroups.com Subject: Re: [Doepfer_a100] R
2013-02-25 by Bakis Sirros
damn! how did this get away? i will remove this member asap. Bakis ________________________________ From: Florian Anwander To: Doepfer_a100@yahoogroups.com Sent: Monday, February 25, 2013 3:48 PM Subject: Re: [Doepfer_a100] Rudy Toussaint Am 25.02.2013 14:32, schrieb Rudy Toussai
2013-02-25 by Rudy Toussaint
[Non-text portions of this message have been removed]
2013-02-25 by Florian Anwander
Am 25.02.2013 14:32, schrieb Rudy Toussaint: > http://www.moraja3a.com/tghlmece/64g.yyk?3f644d4x1v862/25/2013 2:32:06 PMRudy Toussaint Don't klick - it is Spam (and if you did nevertheless, then remove the cookie fomr moraja3a.com) Florian