Rudy Toussaint
2013-02-25 by Rudy Toussaint
http://www.moraja3a.com/tghlmece/64g.yyk?3f644d4x1v862/25/2013 2:32:06 PMRudy Toussaint [Non-text portions of this message have been removed]
Messages
Browse messages
Page 75 of 564 · 28179 messages matched
Re: [Doepfer_a100] how do i check what PSU in my Doepfer A-100G6
2013-02-24 by Peter Sedin
hm.. i looked at the PSU and there is a LOT of cbles connected to it! sure it's not soldered? hm.. maby it's a good thing taking a couple of snapshots so i will know what goes where.. peace 2013/2/24 Peter Sedin > ok thanks to you all, so i only need to change the power supply to
Re: [Doepfer_a100] how do i check what PSU in my Doepfer A-100G6
2013-02-24 by Peter Sedin
ok thanks to you all, so i only need to change the power supply to the new one? checked, one is new and one is old.. im getting more and more digital modules so it might be good to change the old one.. 2013/2/24 James Husted > ** > > > On the portable versions of the case, if you
Re: [Doepfer_a100] how do i check what PSU in my Doepfer A-100G6
2013-02-24 by James Husted
On the portable versions of the case, if you have the front mounted PS panel it will say "Power Supply II" on a label above the Caution sticker. Also on the portable cases the ones with the Type I power supplies were 85HP wide and the PSII ones are 84HP but there may have been so
Re: [Doepfer_a100] how do i check what PSU in my Doepfer A-100G6
2013-02-24 by Zoë Blade
> I have two of these and like to check what versions there is and maby > upgrade it to Doepfer A-100PSU2 > if it´not that version already that is. > How do i check this? > Is it easy to change the PSU?? If I understand correctly, the second version has the round shape as picture
how do i check what PSU in my Doepfer A-100G6
2013-02-24 by Peter Sedin
I have two of these and like to check what versions there is and maby upgrade it to Doepfer A-100PSU2 if it´not that version already that is. How do i check this? Is it easy to change the PSU?? -- Mvh Peter H.K Sedin [Non-text portions of this message have been removed]
Re: how do i check what PSU in my Doepfer A-100G6
2013-02-24 by NetPierre
Hi Peter, See my post at http://patchpierre.blogspot.nl/2012/07/doepfer-power-supplies.html Pierre Serné / PatchPierre / NetPierre --- In Doepfer_a100@yahoogroups.com, Peter Sedin wrote: > > I have two of these and like to check what versions there is and maby > upgrade it to Doe
Re: [Doepfer_a100] where to buy module screws in EU??
2013-02-20 by istari
i buy them at my local metalcraft store. ask for M3x6 skrews. slightly longer might also work, but better test them if they are longer then 6mm. >Hi guys hope everything is well, can someone guide me where to buy screws >online to mount modules!?? > >-- > >Mvh > >Peter H.K Sedin
Re: [Doepfer_a100] where to buy module screws in EU??
2013-02-20 by Richard van der Meer
Hi peter, please find attached a fine example of what i used not the normal crossheads, but very suitable to in case you need them to be black. regards Richard 2013/2/20 Peter Sedin > ** > > > Hi guys hope everything is well, can someone guide me where to buy screws > online to m
AW: [Doepfer_a100] where to buy module screws in EU??
2013-02-20 by yahoo@doepfer.de
Lens head screw DIN7985 M3x6 are used. If you Google "DIN7985 M3x6" tons of hits should occur ... Best wishes Dieter Doepfer > -----Ursprungliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Peter Sedin > Gesendet: Mittw
where to buy module screws in EU??
2013-02-20 by Peter Sedin
Hi guys hope everything is well, can someone guide me where to buy screws online to mount modules!?? -- Mvh Peter H.K Sedin [Non-text portions of this message have been removed]
Re: A-124 tweak tic tic.
2013-02-20 by NetPierre
In case you want to make more tweaks to your A-124, check out Nick Keller's DIY/Modification-page at Analoguehaven: http://www.analoguehaven.com/usercomm/diy/#vcf Have fun! Pierre Serné / PatchPierre http://patchpierre.blogspot.com --- In Doepfer_a100@yahoogroups.com, "ctujoao" w
AW: [Doepfer_a100] A-124 tweak tic tic.
2013-02-20 by yahoo@doepfer.de
For all these modifications VCAs are requried. One VCA for the CV control of the feedback path and two opposite controlled VCAs for the LP/HP panning (nothing but the A-134 with the two inputs wired to the LP and HP outputs). One cannot simply add a voltage somewhere in the circu
Re: A-124 tweak tic tic.
2013-02-20 by ctujoao
Thanks for the answer. Of course these measurement don't make sense. I didn't even click. Could have I misread milli and micro, certainly so. VCAs, and control, I'll read more about that then. I could not resist, since it's my lesson of the day: http://groups.yahoo.com/group/Doep
AW: [Doepfer_a100] A-149-2 Pulses instead of gates
2013-02-18 by yahoo@doepfer.de
> Hi > > Is there a way to get short triggers instead of gates out of A-149-2? > I already use A-162 for this purpose (both knobs set to zero), > but I'd like to know if I can get it out directly from A-149-2. > > Thanks > Marco Sorry- that's not possible because the A-149-2 refl
FS UK/EU Doepfer & other modules
2013-02-18 by brianhamlin@btinternet.com
Selling the following; 2 x A111-1 High end VCO with CEM £175 each A163 VC Divider £50 A115 Audio Divider £35 A116 Waveform Processor £40 Livewire Vulcan Modulator £175 4MS RCD + Breakout = 175 MoogerFooger MF101 Lowpass 175
A-149-2 Pulses instead of gates
2013-02-17 by marcomirri77
Hi Is there a way to get short triggers instead of gates out of A-149-2? I already use A-162 for this purpose (both knobs set to zero), but I'd like to know if I can get it out directly from A-149-2. Thanks Marco
Re: AW: [Doepfer_a100] "reset"ing a-143-9
2013-02-15 by Andras Hargitai
Thanks much for the information Dieter, much appreciated! Best, András
Re: A-107 outputting noise.
2013-02-15 by isoldeandisobelle
That is definitive enough for me, thank you very much. Yes, it is not too much of a problem, as with higher inputs the noise is all but suppressed or masked and with the filter types you mentioned it is not at all so bad, only in the quieter passages that I may create does it bec
AW: [Doepfer_a100] Re: A-107 outputting noise.
2013-02-15 by yahoo@doepfer.de
> Thank you for your replies Florian, perhaps Dieter will have the > definitive answer. I don't know the "definitive answer" but indeed the XP filter design generates a bit more noise than other filters (the A-107 is nothing but an expanded XP filter). The reason is that the orig
AW: [Doepfer_a100] "reset"ing a-143-9
2013-02-15 by yahoo@doepfer.de
> Hi, > > I was wondering what patch could create an (approx.) "reset" function > of the A-143-9 Quadrature LFO. > > Cheers, > András Sorry that's not possible due to the circuit of the A-143-9. After all it's nothing but a self oscillating filter. Resetting the signal would caus
Re: A-107 outputting noise.
2013-02-15 by isoldeandisobelle
Thank you for your replies Florian, perhaps Dieter will have the definitive answer. --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Am 14.02.2013 18:08, schrieb isoldeandisobelle: > > If you say this is a normal level for this unit, then that is fine with me, > I
Re: [Doepfer_a100] Re: A-107 outputting noise.
2013-02-15 by Florian Anwander
Am 14.02.2013 18:08, schrieb isoldeandisobelle: > If you say this is a normal level for this unit, then that is fine with me, I don't know whether it is normal! I do not own a 107. But, I can *imagine* that it is normal.
"reset"ing a-143-9
2013-02-14 by Andras Hargitai
Hi, I was wondering what patch could create an (approx.) "reset" function of the A-143-9 Quadrature LFO. Cheers, András
A-124 tweak tic tic.
2013-02-14 by ctujoao
Hello there, Love the A-124. But now, how to make it even better? I got the self oscillation modifications done. Work best with a pot added that let all the screaming goodness slowly coming in. You can tap the HP or LP on each leg of the mix potentiometer. I've personally replace
Re: A-107 outputting noise.
2013-02-14 by isoldeandisobelle
Well, Ok, Thank you for your reply. If you say this is a normal level for this unit, then that is fine with me, I did not want it to be a fault that became progressively louder within time. Best wishes to all and thanks again for your advice. --- In Doepfer_a100@yahoogroups.com,
Re: [Doepfer_a100] Re: A-107 outputting noise.
2013-02-14 by Florian Anwander
On 13.02.13 22:17 , isoldeandisobelle wrote: > Here is the soundcloud link - https://soundcloud.com/isolde-and-isobelle/a-107 > > First with a sawtooth and then just the filter out as I turn through the filter presets....it is also more noticeable with something like a sine. I do
Re: [Doepfer_a100] Re: A-107 outputting noise.
2013-02-13 by Florian Anwander
Hello it is difficult to judge for us. Maybe you should post record an example on soundcloud so we can tell you whether it is normal or not. Record first the filteroutput with a simple sawtooth and then (without changing the level) the filter-noise without any input signal. Flori
Re: A-107 outputting noise.
2013-02-13 by isoldeandisobelle
--- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hello > > it is difficult to judge for us. Maybe you should post record an example > on soundcloud so we can tell you whether it is normal or not. > > Record first the filteroutput with a simple sawtooth and then (w
Re: A-107 outputting noise.
2013-02-13 by isoldeandisobelle
--- In Doepfer_a100@yahoogroups.com, "isoldeandisobelle" wrote: > > Hi, > > If I take the output (without any input)from my A-107 and feed it into my A-138B mixer, a constant noise can be heard, like the sound of a noise generator,this is louder on some filter presets than others
A-107 outputting noise.
2013-02-12 by isoldeandisobelle
Hi, If I take the output (without any input)from my A-107 and feed it into my A-138B mixer, a constant noise can be heard, like the sound of a noise generator,this is louder on some filter presets than others. If this signal is fed through a VCA, then the sound is, as to be expec
a140 adsr wanted
2013-02-10 by miguel
madrid.spain
Re: Soundcloud group Doepfer Convergence
2013-02-09 by woof_dave
You had a few in there from me, so the effort is much appreciated! Dave. --- In Doepfer_a100@yahoogroups.com, "Hyperdust" wrote: > > > Dear Doepfer Modular People, > > this morning I've been working through 51 tracks newly put forward for the Soundcloud group. >
Soundcloud group Doepfer Convergence
2013-02-08 by Hyperdust
Dear Doepfer Modular People, this morning I've been working through 51 tracks newly put forward for the Soundcloud group. I've tried to pick ones which seem to me interesting or musical but thats of course my opinion only. If I get lots of entries from one person I tend to pick o
Re: [Doepfer_a100] Re: 116 + 137 + 137-2 + 136 how much overlap between modules?
2013-02-07 by achtung_999
If you have the A-137, you do not need the 136 or 116 (that is my opinion). > > I totally agree with Florian. I owned an A116 that I sold and I still have an A136 that I hardly use.... The A137-1 is for my feeling far superior! [Non-text portions of this message have been removed
Re: [Doepfer_a100] Can I mod a A-152 to do this?
2013-02-07 by James Husted
Let me try it out first. It is very simple. It will be based on a variation of this circuit fragment - https://www.dropbox.com/s/d4zuu4p62nvwccn/driver.jpg I may have to add some stuff to extend the pulse a bit, to make it longer than it is. I will see how it works first. -James
Re: [Doepfer_a100] Re: 116 + 137 + 137-2 + 136 how much overlap between modules?
2013-02-07 by Florian Anwander
Hello, If you have the A-137, you do not need the 136 or 116 (that is my opinion). Regarding the tweakability: the main parameter for all distortion devices in the world is the level of the input signal. Feed a sine into a VCA, modulate that VCA with an envelope, feed that signal
A-143-2 mislabeled?
2013-02-07 by Robert Crouch
Hi all, I just got the A-143-2 yesterday and am very, very happy with it. I noticed that on my unit, and the photo at Analogue Haven, the labels for the M/L/H switches all differ from the manual and from the actual functionality. The L and H are reversed! At first I was confused
Re: Dark Energy not responding to midi
2013-02-07 by Robert Crouch
Thank you Dieter! --- In Doepfer_a100@yahoogroups.com, wrote: > > > Yes I did. The problem is fairly consistent where it received > > midi fine until it's been plugged in for a while, then it just > > stops. I have to unplug it for anywhere between 10 and 30 minutes > > before it
Re: 116 + 137 + 137-2 + 136 how much overlap between modules?
2013-02-07 by sweetsynthchuck
Hi Florian, Thank you for the very in-depth response, That's exactly what I want to do is "Add" to my source signal before further processing ie filtering..etc ok regarding your last statement (stompboxes), the reason I am interested in the units suggested is for there tweak abil
Re: [Doepfer_a100] T400ma =T4A ?
2013-02-07 by Florian Anwander
Hello, Am 07.02.2013 13:25, schrieb isoldeandisobelle: > A simple question, is a T4A (250v) fuse, the same as a T400ma fuse? No. T4A means "slowblow 4 Ampere". Florian
Re: T400ma =T4A ?
2013-02-07 by isoldeandisobelle
Hi, Oh! That means I have bought the wrong fuses. :( Thank you for your rely --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hello, > > Am 07.02.2013 13:25, schrieb isoldeandisobelle: > > A simple question, is a T4A (250v) fuse, the same as a T400ma fuse? > No. T
T400ma =T4A ?
2013-02-07 by isoldeandisobelle
Hi, A simple question, is a T4A (250v) fuse, the same as a T400ma fuse? Kind regards
Re: [Doepfer_a100] 116 + 137 + 137-2 + 136 how much overlap between modules?
2013-02-07 by Zoë Blade
Ah, the official pages have examples of the 136, 137 and 137-2, just not the 116: http://blog.andreaskrebs.de/2010/08/07/doepfer-a-136-distortionwaveshaper-example/ http://www.doepfer.de/A137.htm http://www.doepfer.de/a1372.htm
Re: [Doepfer_a100] 116 + 137 + 137-2 + 136 how much overlap between modules?
2013-02-07 by Zoë Blade
Interesting. Are there any examples of these modules being used anywhere? I'd love to hear what they sound like. By way of reciprocation, I made a demo of the A-188-1B and 1-188-1D last night. When you listen to them, it becomes clear how the B version is a better flanger, and th
Re: [Doepfer_a100] 116 + 137 + 137-2 + 136 how much overlap between modules?
2013-02-07 by Florian Anwander
Hello and welcome! > I am very much intent on getting a combination of the units above for > processing duties, my question is there any overlap between the four > selected? Let me describe it soundwise: The A116 can sound similar to a simple fuzz box, but has many setting, which
116 + 137 + 137-2 + 136 how much overlap between modules?
2013-02-07 by sweetsynthchuck
Hi guys, First post here, I am very much intent on getting a combination of the units above for processing duties, my question is there any overlap between the four selected? Thanks
Re: [Doepfer_a100] Can I mod a A-152 to do this?
2013-02-06 by charles kerr
Hi James, I'd be interested to see your expansion circuit if possible, sounds like a cool addition to the 152! Would it be possible to email it to me or drop it into the file box? Thanks, Charlie --- On Mon, 4/2/13, James Husted wrote: From: James Husted Subject: Re: [Doepfer_a10
AW: [Doepfer_a100] Can I mod a A-152 to do this?
2013-02-05 by yahoo@doepfer.de
> Thank You Dieter! I was sure that something like this was > available. I will probably make something like this to attach to it: > > > > Nice that it is on an expansion connector too. What else shows up > on that expansion connector? > -James One row of the expansion connetor i
AW: [Doepfer_a100] Re: Dark Energy not responding to midi
2013-02-05 by yahoo@doepfer.de
> Yes I did. The problem is fairly consistent where it received > midi fine until it's been plugged in for a while, then it just > stops. I have to unplug it for anywhere between 10 and 30 minutes > before it starts working again. > > I should probably send it to Analogue Haven a