Yahoo Groups archive
Messages
Page 77 of 564 · 28179 messages matched
2013-01-07 by Florian Anwander
On 07.01.13 21:35 , matt_widhalm wrote: > I picked up a Pocket Electronics kit a few weeks ago and I decided to go with 16 pots. I know linear is the way to go but what value should be used? 10k, 50k, 100k, ect ect ect.... Thanks! As usually: RTFM http://www.doepfer.de/pdf/PE_man
2013-01-07 by matt_widhalm
I picked up a Pocket Electronics kit a few weeks ago and I decided to go with 16 pots. I know linear is the way to go but what value should be used? 10k, 50k, 100k, ect ect ect.... Thanks!
2013-01-07 by yahoo@doepfer.de
You may simply connect the "hot" midi output signal (i.e. not the GND pin) of the first module to the "hot" midi input of the second module. Connecting the GND is not required as the GND connection is made via the A-100 bus. That way the second module received the same Midi signa
2013-01-07 by yahoo@doepfer.de
Karel, I'll send a copy of this email to Christian Assall (software@doepfer.de). He programmed the new firmware and knows details. Please address questions that relate to the Dark Time firmware directly to him. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von:
2013-01-02 by achtung_999
Thanks Dave! Looks good! And hehehe, my A110's are almost 8 years old so warranty is the last thing to worry about I guess. On Wed, Jan 2, 2013 at 8:29 PM, woof_dave wrote: > ** > > > It's in the service manual for the A-110: > http://www.doepfer.de/a110_tec.htm > > Details are o
2013-01-02 by woof_dave
It's in the service manual for the A-110: http://www.doepfer.de/a110_tec.htm Details are on the circuit diagram, and for extra clarification, I found this (Google translate will be your friend here!): http://modularne.info/?p=713 There's a few other scraps scattered around, but t
2013-01-02 by achtung_999
Ah I was not aware of that! Classy! On Wed, Jan 2, 2013 at 8:25 AM, David Kaiser wrote: > ** > > > I understand the intent of the standard "MIDI Thru' connector, but I am > trying to follow an approach that requires less external gear. > > In this case, Doepfer has provided heade
2013-01-02 by David Kaiser
I understand the intent of the standard "MIDI Thru' connector, but I am trying to follow an approach that requires less external gear. In this case, Doepfer has provided headers on the PCB (printed circuit board) on the backside of the modules, to allow you to daisy-chain multipl
2013-01-01 by achtung_999
Dave, where is the info for this modification found? Thanks! On Tue, Jan 1, 2013 at 11:14 PM, woof_dave wrote: > ** > > > Further digging has answered this for me - close for DC FM (i.e. > continuous source voltage), open for AC (i.e. audio). > > It's all there if I look for it ;
2013-01-01 by achtung_999
Sorry to hear that Philip Rees is out of business. But I think Kenton makes excellent stuff too. http://www.kentonuk.com/products/select/midi-utilsel.shtml On Tue, Jan 1, 2013 at 2:04 PM, wrote: > ** > > > Regret to say Philip Rees stopped trading years ago. I still have one of >
2013-01-01 by woof_dave
I bought a Kenton Thru-5 MIDI thru unit a couple of weeks ago, and it does the job perfectly. Pretty good value too. Dave. --- In Doepfer_a100@yahoogroups.com, achtung_999 wrote: > > Sorry to hear that Philip Rees is out of business. But I think Kenton makes > excellent stuff too
2013-01-01 by woof_dave
Further digging has answered this for me - close for DC FM (i.e. continuous source voltage), open for AC (i.e. audio). It's all there if I look for it ;-) Dave. --- In Doepfer_a100@yahoogroups.com, "woof_dave" wrote: > > Hi, > > I'm adding the extra connections, etc, to make the
2013-01-01 by woof_dave
Hi, I'm adding the extra connections, etc, to make the linear FM change to the A-110 VCO, and it isn't clear to me whether the "AC/DC Coupling" jumper should be open (as per the default), or closed when the linear FM addition is made. Anyone know which state it should be in? Than
2013-01-01 by anthony.box@talk21.com
Regret to say Philip Rees stopped trading years ago. I still have one of their MIDI devices but recently changed over to MUTU. http://www.wizardwoodcraft.co.uk/ Norfolk UK From: achtung_999 >To: Doepfer_a100@yahoogroups.com >Sent: Tuesday, 1 January 2013, 9:37 >Subject: Re: [Doep
2013-01-01 by achtung_999
What you want is a Midi Thru connector. As I can see both the 190-2 and 190-3 don't have a Thru connector. Best thing you can do is buy an active midi thru box like a Philip Rees or so. http://www.philrees.co.uk/products/thruunit.htm On Tue, Jan 1, 2013 at 1:32 AM, David Kaiser w
2013-01-01 by David Kaiser
I have a A-190-3 USB/Midi to CV interface (http://www.doepfer.de/a1903.htm), and recently picked up a A-190-2 Midi to CV interface (http://www.doepfer.de/a1902.htm) as well. I'm hoping to daisy-chain the serial MIDI data between the two modules, so I can use one MIDI (or USB) cab
2012-12-31 by karelvanbezooijen
Hello, I installed firmware version v1.2 today and noticed this when using the additional Combi Modes: When using Mode 1 (which is the 'standard mode' i.e. lower row is gate length) row 1 is dependent to row 2. I mean step 9 always controlling step 1 and so on. This is different
2012-12-24 by Marc-Henri Arfeux
Hi Bakis and all the musicians of the group ! I wish you all a merry Christmas and end of year with our favorite modulars ! A special wish dedicated to Dieter Doepfer their creator ! Cheers, Marc-Henri [Non-text portions of this message have been removed]
2012-12-24 by Tony Steventon
Same to you Bakis and to all A100 fans Cheers Tony Sent from my iPhone On 24 Dec 2012, at 12:21, Bakis Sirros wrote: > hi list, > > wishing you all a Merry Christmas / Happy Holidays and a Happy, Healthy > , Peaceful, Creative (and full of Music) New Year for 2013. > > best regar
2012-12-24 by Bakis Sirros
hi list, wishing you all a Merry Christmas / Happy Holidays and a Happy, Healthy , Peaceful, Creative (and full of Music) New Year for 2013. best regards, :-) Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds -
2012-12-21 by Bakis Sirros
for sale, in fine condition, with their cables and screws: 4ms VCA MATRIX, new price is 393 euros, my price is 278 euros total! Intellijel DR Octature , new price is 260 euros, my price is 148 euros only!, but one of the 8 filter/phase outputs jacks is defective and needs replaci
2012-12-20 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Would you buy a Doepfer A100 'Serge Voltage Controlled Slope' inspired module? (this poll is ordered from Dieter himself! the module will be manufactured with the official license from the c
2012-12-19 by Os
It was sequenced in (my own) Expert Sleepers Silent Way, using the Step LFO mainly. Loops of the synth are being recorded and looped in Ableton Live to build up layers. The drums are sequenced via Numerology (VST version). cheers, os. On 18 December 2012 20:17, Kai Niggemann wrot
2012-12-19 by neal_beard_ahm
Ha ha, good stuff! I'm uk based so hope to catch you live sometime... :-) --- In Doepfer_a100@yahoogroups.com, Os wrote: > > Here: > > http://vimeo.com/55599161 > > Festive, in that I'm wearing a santa hat as I play :) > > The modules used are shown here: > > http://www.modulargr
2012-12-18 by Kai Niggemann
Nice, so my assumptions were a bit off, I guess..;) What did you do to sequence the track? And: actually I really enjoyed the first seven minutes -- it's like a motor running up to temperature.
2012-12-18 by Os
> > Intereseting Setup. It looks like you started out with a Doepfer Base > System, then gradually replaced the modules? > Not at all! I actually started all Analogue Systems. The modules in that rack have been accumulated randomly over a few years. This became my live rack becau
2012-12-18 by Kai Niggemann
On 18.12.2012, at 06:40, Os wrote: > The modules used are shown here: > > http://www.modulargrid.net/e/racks/view/4103 Intereseting Setup. It looks like you started out with a Doepfer Base System, then gradually replaced the modules? Kai [Non-text portions of this message have be
2012-12-18 by Os
That's the Strakal Brulu! cheers, os. On 18 December 2012 12:12, wrote: > ** > > > Os - loving the percussion. What's making the screaming distorted > noise? > > cheers, J> > > On Tue, Dec 18, 2012, at 11:40 AM, Os wrote: > > Here: > [1]http://vimeo.com/55599161 > > Festive, in t
2012-12-18 by jim@cernproductions.com
Os - loving the percussion. What's making the screaming distorted noise? cheers, J> On Tue, Dec 18, 2012, at 11:40 AM, Os wrote: Here: [1]http://vimeo.com/55599161 Festive, in that I'm wearing a santa hat as I play :) The modules used are shown here: [2]http://www.modulargrid.net
2012-12-18 by Os
Here: http://vimeo.com/55599161 Festive, in that I'm wearing a santa hat as I play :) The modules used are shown here: http://www.modulargrid.net/e/racks/view/4103 Merry Christmas! os. -- os@collective.co.uk http://twitter.com/expertsleepers http://www.darkroomtheband.net/ http:/
2012-12-16 by Ben Cameron
Hello Everyone, In addition to letting you know via various social media platforms, I thought I'd try to inform you about the release of my new e.p. via this intimate mass email. Rest assured that I included you because I think that for one reason or another, you will enjoy heari
2012-12-16 by achtung_999
This normal. You should see it this way: the gain knob controls the 'opening' of the VCA together with the control voltage at the cv input. In your case this is an envelope which is most commonly a positive voltage, so putting the gain at 0 is a good setting. Try putting the gain
2012-12-16 by Zoë Blade
That's exactly right. An analogue oscillator will *always* oscillate from the moment you turn it on, even between the notes. It doesn't even know when the notes begin and end, it only knows when to change pitch. The attenuator/amplifier has a gain knob which controls how much of
2012-12-16 by isoldeandisobelle
Thank you very much to both of you for your replies, they have made it a whole lot clearer....just one other question, I read on this group that eventually the A-113 Subharmonic Generator will be made without the need for a 5v adapter...is this still the case? Thanks again --- In
2012-12-16 by isoldeandisobelle
Hi, I am fairly new to the world of Modular's, so I may be getting something wrong here - I am running the output of a A-110 through the A-107 which is going in to the A-132-3 (set to exp) which is being controlled by A-143-2 and the out put to A-138 mixer. If the gain knob on th
2012-12-16 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Would you like DOEPFER to release a complete synthesizer module based on the Serge ANIMAL? CHOICES AND RESULTS - yes and even more of these, 26 votes, 61.90% - No, not interested, 16 votes,
2012-12-14 by achtung_999
Regarding the bipolar attenuators. Could I humbly suggest 'center detent' pots? Ernst On Fri, Dec 14, 2012 at 4:05 PM, Jesse Buehler wrote: > ** > > > I say keep the switches. I don't have th on my quad slope but I really, > really wish it did! I'd rather an offset/attenuator for
2012-12-14 by Jesse Buehler
I say keep the switches. I don't have th on my quad slope but I really, really wish it did! I'd rather an offset/attenuator for the far fewer times I've used bipolar outs. Ymmv of course. Sent from my iPhone On Dec 14, 2012, at 4:49 AM, Martin Fay wrote: > Bit of a late entry her
2012-12-14 by Zoë Blade
Ah, yes, csound can predict which note's coming up next because it's rendering a score, so it can just look ahead as if it's seeing the future. This is kinda confusing when you first start using it, as (if I remember correctly) the envelop generators take into account when the no
2012-12-14 by Jim Credland
Sorry, it was only half serious. Very dry humour on my part. It's a good question though in other ways if not strictly relevant for this thread. Both predictive synthesis for live playing and (easier and tighter) emulating it in tools like csound is quite interesting ... effects
2012-12-14 by Martin Fay
Bit of a late entry here, but there appears to be a choice between including the cycle switch (not found on a stock STS DUSG) or a bipolar output (present). Cycle can be patch-programmed with a patch cord from Gate to Trigger, then if Gate is used for anything else it would need
2012-12-13 by sirolffoonav
Great news that the serge/cgs/doepfer vcs is coming through. I'm using lots of DUSG's since long and have 2 front panel tips: -groups switches and led to gain space for extra (feedback?) knob or ergonomics. -UP/DOWN pots next to each other and both cv pots next to each other too.
2012-12-13 by Florian Anwander
Hello perhaps he is thinking about something like the autoslide at the old Roland SH-Series, which is a Decay-Envelope on the pitch-CV. Florian Am 13.12.2012 15:29, schrieb Jesse Buehler: > How could a module 'know' what note you want to slide into? This is something that could b
2012-12-13 by Zoë Blade
> How could a module 'know' what note you want to slide into? This is something that could be accomplished by a sequencer where to notes are in memory. You're asking for something like the TB303 sequencer's slide. Not really possible as far as I know. Yeah, if it's a sincere ques
2012-12-13 by Jesse Buehler
How could a module 'know' what note you want to slide into? This is something that could be accomplished by a sequencer where to notes are in memory. You're asking for something like the TB303 sequencer's slide. Not really possible as far as I know. Sent from my iPhone On Dec 13,
2012-12-13 by Bakis Sirros
that feature is already included in the functionality of the VCS. you just connect your gate signal to the 'audio' input of the VCS. Bakis ________________________________ From: Marco Zambardi To: Doepfer_a100@yahoogroups.com Sent: Thursday, December 13, 2012 1:02 PM Subject: [Do
2012-12-13 by Marco Zambardi
Hi! great module! i just would add a features so to use the trigger in as a gate in too and too keep the enveloped hold at its maximum till the gate is high; falling portion would start as the gate goes low. this will allow AR and ASR envelopes. [Non-text portions of this message
2012-12-13 by yahoo@doepfer.de
> Dieter - could we have a feature which pre-empts the note you are about > to play and slides there in advance? > > thanks, J. The module is a copy of the Serge/CGS design. I don't know if this feature is included as we do not yet have a working unit available. We just started t
2012-12-13 by yahoo@doepfer.de
> One small question, would the polarizer controls be marked -5 to > +5 rather than 0 to 10? > > Thanks. > > Geoff I forgot to copy the latest version of the front panel layout to the website. Now the right one is online. Best wishes Dieter Doepfer
2012-12-12 by Geoff Coward
One small question, would the polarizer controls be marked -5 to +5 rather than 0 to 10? Thanks. Geoff ________________________________ From: "yahoo@doepfer.de" To: Doepfer_a100@yahoogroups.com Sent: Wednesday, December 12, 2012 7:11 AM Subject: [Doepfer_a100] A-171-2 VCS As the