Terminal Says "Permission Denied" On Install of Profiles Via IPP
2006-04-08 by sheldoncharron
Hi Guys. I m new here and new to RIPs, but I m begging for help. :( I m trying to set up the software to print to a Epson 4000 that is on a small network
Messages
Browse messages
Page 273 of 318 · 15852 messages matched
Re: new user with a question
2006-04-07 by edrudolpho
No, there isn t. Ed
new user with a question
2006-04-07 by Keith Zimmerman
I am a new user of QuadtoneRIP and have a question about sharpening. I can t find anything in the documentation about sharpening before printing. Is there any
Re: Problems printing to a 2200
2006-04-07 by Frank Kolwicz
Steve, CAVEAT: it may be possible to damage a printhead doing this, even though I ve done it a dozen times on 3 different Epson printers over the years, so
Re: [QuadtoneRIP] lots o' bronzing on Kirkland when using Photo profile in Qimage
2006-04-07 by Allan Chen
I just realized (via a response on the BW list) that I forgot to say that it s a 1280 with the ut2 set. thanks, allan ... -- http://allan.kaiyen.com
Re: [QuadtoneRIP] Re: Problems printing to a 2200
2006-04-07 by Steve and Ann Taylor
I ran the nozzle check and the Cyan and Magenta are totally clogged and the light Black and Yellow are partially clogged. I ran one cleaning cycle and it
Re: Problems printing to a 2200
2006-04-07 by Frank Kolwicz
Are you sure you need a cleaning cart? I ve had a 2200 for 3 years and an 1160 for more than 5 years, I also don t print for weeks or months at at time and
Hahnemuhle and other Epson paper Profiles for the R2400 with UC K3 inks
2006-04-07 by mindful2me
Hi, I m a new QTR user and am very impressed with it. I do not have the ability to profile my papers though. I use Epson s Enhanced Matte paper, but also use
Re: [QuadtoneRIP] Problems printing to a 2200
2006-04-06 by Steve and Ann Taylor
Never mind, I was just testing the printer as I had just purchased it. Two of the ink cartridges were empty and I thought QTR didn t care about that and would
Problems printing to a 2200
2006-04-06 by Steve and Ann Taylor
OK, I got a used Epson 2200 and connected it to my Win2000 computer. QTR didn t recognize it at first. After I installed the Epson driver, then QTR recognized
lots o' bronzing on Kirkland when using Photo profile in Qimage
2006-04-05 by Allan Chen
Hi all, First time posting here. I always seem to be several months behind the curve (heh) on b&w printing, so I went back to the beginning of this mailing
Innovia Cotton and Hawk Mountain Condor Bright White Profiles?
2006-04-05 by Mr_Misty_44
Does anyone have QTR Profiles or a suggestion for starting profiles which already exist in QTR (2200, 7600) for Innovia and Hawk Mountain Concor Bright White.
R2400 and Drying Time
2006-04-04 by dgattarino
Dear Roy, I have experimented for quite a while with few printer Profile Maker, including your QuadToneRip. I have found the latter quite superior to using
Re: ink limit adjustment tool uncertainty....
2006-04-03 by sagaface
Howard, thanks so much for the post. I m starting to get the idea finally! best, Sarah
Re: [QuadtoneRIP] ink limit adjustment tool uncertainty....
2006-04-03 by Howard Shaw
Sarah The qtrgui help file says the following about the Ink Limit Adjustment Slider: Ink Limit effects the darkness of the shadows. Reducing Ink Limit can
ink limit adjustment tool uncertainty....
2006-04-02 by sagaface
I posted this on the B/W group and received no repsonse, though someone helpfully directed me here. I hope this question doesn t seem too first grade : I use
Missing light cyan in printing
2006-03-31 by Johnny Eades
Good afternoon folks, I m in a tizzy over this problem with my Epson 1280 printer, which did not start till the last refilling of the cartridge a couple of
QuadToneRip Version 2.4.1 and Epson 4000. Help
2006-03-31 by alfur2006
Looking under the Printing Model Tab, which is the difference between Quad 4000, Quad 4000 - GQ, and Quad 4000 NKT. Thanks
Re: Epson SP 7600 with monochrom 7-ink-set - Expert needed
2006-03-31 by phil.antrop
I forgot: the nozzles are okay and I cleaned the head several times
Epson SP 7600 with monochrom 7-ink-set - Expert needed
2006-03-31 by phil.antrop
Hi, I m trying to use the QTR with the Epson SP 7600 equipped with a 7-grey-ink-set by monochrom. The first testprints after creating a curve following the
Re: Problems with NK7 and Epson 2100
2006-03-31 by tn46quilter
Hi Will, Thanks for the help. You are abolsutely right - I did a nozzle check and some cleaning and that seemed to solve the problem. I must admit that I ve
Re: Ink-Separation Tiff files...
2006-03-31 by davidkeasey
Oops! Somehow I managed to leave out the Light Cyan nozzle set. Red = 247 selects the Light Cyan nozzles.
Re: Custom Ink Separation Stepwedge...
2006-03-31 by davidkeasey
I ve tried and tried, but all I get is a black piece of paper when I print this file in calibration mode. I ve built my own file and it prints fine in
Ink-Separation Tiff files...
2006-03-31 by davidkeasey
After searching through QTR documentation, tutorials, the posts and posted files, I couldn t find anything on how to go about making your own ink separation
Re: Problems with NK7 and Epson 2100
2006-03-31 by wjlafever
Tom Have you tried doing a nozzle check? With the K7 s using so many shades of gray, if one fails the image will still print but will look as you said - a
Re: Problems with NK7 and Epson 2100
2006-03-30 by joshhackney
Hi Tom, First, are you confident in your monitor calibration? Second, you say that you assigned gg2.2. Did you really perform an assign or a conversion?
Re: Custom Ink Separation Stepwedge...
2006-03-30 by davidkeasey
Never mind.... I managed to figure it out for myself. I m not sure exactly what s wrong with the stepwedge that s posted in the files, but the one I built
Re: Ilford Curves - Smooth Fine Art paper
2006-03-30 by Steve Nichols
I went back and looked through the drop-down list of curves in the Epson 2200 group, and only found Ilford Smooth Pearl curves. Are these curves you re
Re: Any experts on the X-Rite DTP32R?
2006-03-30 by davidkeasey
Yes, a simple black/white/medium gray ceramic standard would be nice... Unfortunately, this little beastie is built for use by folks with little knowledge in
Re: [QuadtoneRIP] Any experts on the X-Rite DTP32R?
2006-03-30 by Ernst Dinkla
... With the printer you want to calibrate ? Shouldn t the horse not be at the other side of the carriage ? If you know the data the patches should have (and
Problems with NK7 and Epson 2100
2006-03-30 by tn46quilter
Dear all, First of all, apologies in advance if this proves to be a stupid question ! I run an Epson 2100 and, until now have been using the Epson ink- set.
RE: [QuadtoneRIP] Custom Ink Separation Stepwedge...
2006-03-30 by Tom Moore
David If you can open the file in PS and it looks ok, then the file most likely IS ok. The problem is more likely somewhere else. I presume you re using a PC
Custom Ink Separation Stepwedge...
2006-03-30 by davidkeasey
Hmmm... I guess nobody knows much about the DTP-Inkseparation.tiff file that I m having trouble with. So I ll try another approach... Are there any
Re: Ilford Curves - Smooth Fine Art paper
2006-03-29 by benasaj
... They re stock included curves for the Epson 2200 printer selection. You might have to tweak the Shadow and Midtones sliders a little, but they work fine
What paper profiles come with the download for Epson 2400
2006-03-29 by tom_and_marj
Where can I get a list of the printer profiles for the 2400. I use a 2200, but am trying to convince a friend to use the QuadTone RIP with her 2400. She wants
Re: Ilford Curves - Smooth Fine Art paper
2006-03-29 by Steve Nichols
Thanks for the info. Where can I find these curves and are they available for downloading? ... Turner. ... if ... William ... using an
Re: Ilford Curves - Smooth Fine Art paper
2006-03-29 by benasaj
... I ve also had very good success using UCmk EVelvet FineArt for William Turner. It seemed a toss-up between them and HPhoto Rag. I m using an Epson 2200.
Re: Ilford Curves - Smooth Fine Art paper
2006-03-29 by Shilesh Jani
Steve, The Ilford paper appears to be the same as Hahnemuhle William Turner. Hahnemuhle Photo Rag curve should get you close. Of course only if curves are
Ilford Curves - Smooth Fine Art paper
2006-03-28 by Steve Nichols
Has anyone worked up a set of curves for Ilford Smooth Fine Art paper using Matte black ink? (I looked in the Files page, didn t see any) Thanks, Steve N
Re: [QuadtoneRIP] QTR profile without MK or PK with ultrachrome K3
2006-03-28 by Carl Schofield
I made a noK profile for use with the 2200 UC inks on RC papers. It generates black using only the light black, with LC and LM for toning. I think it may
QTR profile without MK or PK with ultrachrome K3
2006-03-28 by bwdigiprint
Hello, Has somebody already tried to make a profile which does not use PK nor MK to avoid switching between those two inks when printing on mat or glossy paper
dtp-inkseparation.tiff ... is this file corrupted?
2006-03-28 by davidkeasey
I am having some trouble with this file, and when I try to print it in ink-calibration mode, all I get is a large black rectangle. I can open it in photoshop,
Re: How to install printer profiles created with qtr_create_icc?
2006-03-27 by Kip Cole
OK, problem solved. Turns out that Photoshop shows the embedded name of the profile, not the file name. I was looking for the file name (no, they weren t the
Re: The X-Rite DTP32R... Any Experts Here?
2006-03-27 by John Vitollo
... Sorry I never had a calibration strip. Like you I asked on all the lists to see if I could get a freebee or on the cheap...no luck after a couple years. If
The X-Rite DTP32R... Any Experts Here?
2006-03-26 by davidkeasey
So, since you are no longer using your DTP32, do you still have that calibration strip laying around? From what I can see of examples, it is simply a pattern
How to install printer profiles created with qtr_create_icc?
2006-03-26 by Kip Cole
Well I solved my problem scanning the 51-step random target, but..... I seem unable to install or use the profiles I ve created with qtr_create_icc. The
Re: Any experts on the X-Rite DTP32R?
2006-03-25 by John Vitollo
... I have the same unit but couldn t get past asking for a calibration strip. I think you really need the calibartion strip to move ahead. Actually I asked
Any experts on the X-Rite DTP32R?
2006-03-25 by davidkeasey
Does anyone have some expertise with this densitometer? I just manage to acquire one, and though the operation manual was provided, it is obvious that this
Newbie Question
2006-03-25 by Steve and Ann Taylor
Hi, I tried QTR quite a while ago and got frustrated with trying to get it working. Now I just downloaded the most recent version and am going to give it
Curves for media street generations
2006-03-24 by Clarence Walker
Does anyone have a curve set to enhance prints with MediaStreet Generations quad tones, Entrada natural on an Epson 200, or should the default curves such as