Yahoo Groups archive
Messages
Page 45 of 144 · 7194 messages matched
2008-03-15 by matthew carpenter
My short answer is that I use all of these to attenuate any inputs that don't have them, which, on the Serge, are few and far between. I specifically have a Scaling Buffer, Scaling Processor and Active Processor near my two ADSRs. I haven't found any disadvantages to using any of
2008-03-15 by Harold Tique
Greetings Frank and SMOG folks, The c/m Module(s) are the best for this. It contains two independent passive attenuators. Aslo, as an added feature, the upper "gate" voltage is a regulated +5v out that can be 'switched in' as a bias voltage who's level can then be preset by one (
2008-03-15 by fhserge
In the past I was quite successful in destroying some of my speakers which is not rarely very costly as you might know...I sometimes like it LOUD, VERY loud... I connect my synths/modulars in many different ways - directly from e. g. an Serge UAP into an AUX input of a Hi-Fi Amp
2008-03-15 by fhserge
As I am always trying to optimize my system I found the lack of attenuators my biggest "problem" so far. E. g. the "typical" wish of attenuating the ADSR stages. I searched the archives and found one "for sale" ad from John who mentioned a panel WITH attenuators for his ADSRs. Di
2008-03-14 by darkstr1746@comcast.net
Attachments : damn if some of those panels don't look familiar. hahaha good to see some activity like this on the list. I tried to raise this sequencer question about eight years ago and got nothing but silence. Glad to see you guys are sharing the Serge mojo. information = more
2008-03-14 by Carbon111
>- route A and B outs to the two ins of a VC X-fader I'm pretty sure an X-Fader won't work on CVs, you need an Active Processor - There's one on the Sequencer-A M-odule by coincidence ;). People, please feel free to correct me if I'm wrong. Best Regards, James -- http://www.carbo
2008-03-14 by matthew carpenter
Thanks, Chris! I'll try it tonight and get back to you. Matt On 3/14/08, Chris Sawyer paradigmshiftbeats@... > wrote: If you have a true square wave clock available, couldn't you route the same signal to both the Active Processor's VC IN and Sequencer's CLOCK IN to produce the fo
2008-03-14 by Chris Sawyer
If you have a true square wave clock available, couldn't you route the same signal to both the Active Processor's VC IN and Sequencer's CLOCK IN to produce the following pattern? A1, B1, A2, B2, A3, B3, A4, B4, A5, B5, A6, B6, A7, B7, A8, B8 If your primary clock source is not a
2008-03-14 by simulacreant
Hey -- Chris Muir -- I remember you writing a bit about your history with Rex and SMS (Salamander Music Systems) in a Matrixsynth comment awhile ago. I know that Rex was in Rhythm & Noise with Naut Humon, who runs Recombinant Media Labs and that you and Rex worked together at SMS
2008-03-14 by matthew carpenter
Chris S., are you following this? I was wondering if you had any insights. I know you enjoy the sequencers quite a bit. Matt On 3/14/08, Bakis Sirros synth_freak_2000@... > wrote: yes, you are probably right. i still do not have a serge pulse divider to be sure really. i will hav
2008-03-14 by matthew carpenter
No problem... You're going to have a blast with your Creature/Gator/2 x Sequencer B! Matt On 3/14/08, Bakis Sirros synth_freak_2000@... > wrote: yes, you are probably right. i still do not have a serge pulse divider to be sure really. i will have one soon though... and i do not h
2008-03-14 by Bakis Sirros
yes, you are probably right. i still do not have a serge pulse divider to be sure really. i will have one soon though... and i do not have an Xfad serge module yet, (soon i'll have this too) so, i cannot try the patch... --- matthew carpenter matfhew.carpenfer@... > wrote: > Can
2008-03-14 by matthew carpenter
Can you explain this? The 1/8 clock pulse still goes to the ACPR or XFAD VC IN? If you can, try it on your system... I remember the original post about chaining two rows of the 4 Stage SQP together using the / 8 output of the PDIV. The original poster was surprised that this woul
2008-03-14 by Bakis Sirros
...just mult and divide by 8 (via the pulse divider module) the clocking pulse that will clock the 2x18 sequencer... and you got your gate out at 1/8 of the clock speed. --- kkonkkrete kkonkkrete@... > wrote: > > OK, this is a bit of a guess as I don't actually own > one, but her
2008-03-14 by matthew carpenter
Thanks! It's funny... I tried that... and that's exactly how you do it with the SQP for making an 8 step sequence out of two rows of 4. (I use an ACPR rather than an XFAD). In that case, you actually need to use the / 8 output not the / 4. If I use 1/8 the freq. of the main clock
2008-03-14 by kkonkkrete
OK, this is a bit of a guess as I don't actually own one, but here is a workaround I think should work: - route A and B outs to the two ins of a VC X-fader - apply a square wave at 1/8 the freq of the main clock to the VC In of the X-fader. - The out of the X-fader will alternate
2008-03-13 by matthew carpenter
Hi, I know how to make an 8 step sequence with the 4 Stage Sequencer Programmer [SQP] using an Active Processor [ACPR] and the Pulse Divider [PDIV] but I'd like to know if anyone's discovered a way of chaining the two rows of the 8x2 Sequencer [SEQ] to make a single 16-step seque
2008-03-13 by matthew carpenter
Just posted on the Matrixsynth blog -- lots of nice pictures of RML's Serge and SMS systems + more... http://www.flickr.com/photos/chachijones/sets/72157604105448724/ Matt
2008-03-13 by Ken Stone
of note is that there are 17 columns in the older (left) panels. Most older ones I've seen only have 16, and a slightly narrower panel. My 1973 (confirmed) unit is very similar to this, so I'd put it as being a 1973 to 1974 unit. The VCOs and filters in the earlier ones were cove
2008-03-12 by S V G
Hi, The two panels on the left are pre-1977, I can't say for sure how much farther back they go. They could even have been built in 1977 and just used the old style graphics. The panel on the upper right (3 modules) are in the 1977-78 era. This I can say for sure. Is everything f
2008-03-12 by Carbon111
Hi there, >when you buy a serge module from Rex do you get a receipt? You'll get a signed contract from Rex describing the system and laying out both STS's and your obligations. Your cancelled check or Cashiers Check stub are your recipt. If you need something else, ask Rex, I'm
2008-03-12 by Dennis Verschoor
The bass sound is just a NTO sine trough a wavemultiplier. The sequencing just a RVG trough a quantizer. The other sounds are done with the Smooth Stepped generator and some other stuff. Download >>> http://robotdj.net/?dj=mono-poly Cheers, Dennis On Wed, Mar 12, 2008 at 12:25 AM
2008-03-12 by matthew carpenter
You should have a copy of the contract/invoice. That's all I've ever gotten. Not sure why your e-mails are bouncing, though. Hope that gets resolved for you! On 3/12/08, JB ringmodulator@... > wrote: I recently bought an Animal, i did not get a reciept. 2008/3/12, cray5656 amni56
2008-03-12 by JB
I recently bought an Animal, i did not get a reciept. 2008/3/12, cray5656 amni56@... >: > hi all > > when you buy a serge module from Rex do you get a receipt? > his emails are being rejected, and its too lake I assume to call him, > also what is the warranty duration on just bou
2008-03-12 by cray5656
hi all when you buy a serge module from Rex do you get a receipt? his emails are being rejected, and its too lake I assume to call him, also what is the warranty duration on just bought items? thanks
2008-03-12 by cray5656
any chance we can download this?
2008-03-11 by Kim Hansen
how did you patch the bass sound ? ( its hard to tell from the picture - you need shorter patch-cables ;) kim On Mar 12, 2008, at 12:15 AM, Kim Hansen wrote: > nice - > > > On Mar 11, 2008, at 11:38 PM, Dennis Verschoor wrote: > >> http://www.twango.com/media/mono-poly.public/mon
2008-03-11 by Kim Hansen
nice - On Mar 11, 2008, at 11:38 PM, Dennis Verschoor wrote: > http://www.twango.com/media/mono-poly.public/mono-poly.10027 > > Self playing patch i did with my "new" Serge i bought on evilbay. > > Pic of the patch > http://img391.imageshack.us/img391/2838/noodlesnbassbc8.jpg > >
2008-03-11 by Dennis Verschoor
http://www.twango.com/media/mono-poly.public/mono-poly.10027 Self playing patch i did with my "new" Serge i bought on evilbay. Pic of the patch http://img391.imageshack.us/img391/2838/noodlesnbassbc8.jpg Cheers, Dennis -- ----------------------------------------------------------
2008-03-11 by don hassler
Looks close in vintage to mine(though labeled incorrectly as someone elses, plus it's actually one of the Calarts circa Serges, very early 70's probably 71 or 72 I think. This one being built by Carter Thomas), here's a link to the manual: http://home.att.net/~djaux/intro76.htm w
2008-03-11 by matthew carpenter
Yes we're so lucky to have such a strong dollar! :D On Tue, Mar 11, 2008 at 4:12 PM, Bakis Sirros synth_freak_2000@... > wrote: hello Ross, when i buy from them, the postage is ok...not cheap, but ok. best regards, Bakis. --- cray5656 amni56@... > wrote: > I ordered 4 small banan
2008-03-11 by Bakis Sirros
hello Ross, when i buy from them, the postage is ok...not cheap, but ok. best regards, Bakis. --- cray5656 amni56@... > wrote: > I ordered 4 small banana leads and have been charged > US$41 for postage! > I have written back to say this is a crazy price > considering I pay > $20f
2008-03-11 by cray5656
I ordered 4 small banana leads and have been charged US$41 for postage! I have written back to say this is a crazy price considering I pay $20for eurorack modules... You Americans dont know how lucky you are.
2008-03-11 by Kim Hansen
looks quite old - have you checked out: http://www.serge-fans.com/index.htm Kim On Mar 11, 2008, at 8:55 PM, axcel1100 wrote: > Hi, > I have a friend who recently acquired a serge panel and am just > looking for any and all information I can get. > > I have uploaded a few photos
2008-03-11 by axcel1100
Hi, I have a friend who recently acquired a serge panel and am just looking for any and all information I can get. I have uploaded a few photos to Flickr Here (sorry about the quality) Thanks
2008-03-09 by john josef
that is exactly why , though i like serge stuff alot , i have never purchased any... --- Bakis Sirros synth_freak_2000@... > wrote: > more m-odules will come in the future, patience > guys... > > > --- amnesia amni56@... > wrote: > > > wow i was thinking the exact thing a few hou
2008-03-09 by Bakis Sirros
more m-odules will come in the future, patience guys... --- amnesia amni56@... > wrote: > wow i was thinking the exact thing a few hours ago > > Ioannis Kazlaris wrote: > > Is it just me, or anyone thinks the absense of > customization for Serge > > sucks big time? I mean why sho
2008-03-09 by amnesia
wow i was thinking the exact thing a few hours ago Ioannis Kazlaris wrote: > Is it just me, or anyone thinks the absense of customization for Serge > sucks big time? I mean why should I fork out 6000 euros to get 2 ADSR > which I need for my music? Why not be able to customize th
2008-03-09 by Bakis Sirros
M-odules --- Ioannis Kazlaris ikazlar@... > wrote: > Is it just me, or anyone thinks the absense of > customization for Serge sucks big time? I mean why > should I fork out 6000 euros to get 2 ADSR which I > need for my music? Why not be able to customize the > panels as previous
2008-03-09 by Ioannis Kazlaris
Is it just me, or anyone thinks the absense of customization for Serge sucks big time? I mean why should I fork out 6000 euros to get 2 ADSR which I need for my music? Why not be able to customize the panels as previously? Isn't the asking price already high enough to justify for
2008-03-08 by matthew carpenter
yeah, that was pretty bad! On Sat, Mar 8, 2008 at 6:48 AM, Carbon111 carbon111@... > wrote: Damn Matt, I thought *my* puns were bad...Aaaarrrgh! Best, James >a bunch of apeholes >>who'd want to steal >>banana cables??
2008-03-08 by Carbon111
Damn Matt, I thought *my* puns were bad...Aaaarrrgh! Best, James >a bunch of apeholes >>who'd want to steal >>banana cables??
2008-03-08 by matthew carpenter
a bunch of apeholes On 3/7/08, John P johnp299792@... > wrote: sorry to hear bout your misfortune, but, cripes, who'd want to steal banana cables?? riluttante wrote: > > All of my patch cables were stolen recently, so I need to replace them... >
2008-03-08 by John P
drool... what a great selection... Bakis Sirros wrote: > > here is from where i have bought them, nice service > and prices: > > http://www.testpath.com/Categories/Banana-Plug-Patch-Cords-PVC-Stacking-1835.htm > http://www.testpath.com/Categories/Banana-Plug-Patch-Cords-PVC-Stack
2008-03-08 by John P
sorry to hear bout your misfortune, but, cripes, who'd want to steal banana cables?? riluttante wrote: > > All of my patch cables were stolen recently, so I need to replace them... >
2008-03-08 by Bill Sequeira
Anyone used those Cal Test cables featured in the site that Bakis provided? Very inexpensive. I have looked at other off-brands but most of them have been deficient in the mechanical aspects of the banana metal contacts (not enough "grip"), so I have stayed away from them. Cheers
2008-03-07 by matthew carpenter
Yep, Test Path is where I get them, as well. On Fri, Mar 7, 2008 at 5:20 PM, Bakis Sirros synth_freak_2000@... > wrote: you're welcome. :-) --- Tim J bob_aloha@... > wrote: > > Damn. Those are great prices! They are usually a > buck or two more each cable... > Thanks for the link
2008-03-07 by Bakis Sirros
you're welcome. :-) --- Tim J bob_aloha@... > wrote: > > Damn. Those are great prices! They are usually a > buck or two more each cable... > Thanks for the link Bakis! > > > To: SergeModular@yahoogroups.comFrom : > synth_freak_2000@... : Fri, 7 Mar 2008 > 14:03:20 -0800Subject: R
2008-03-07 by Tim J
Damn. Those are great prices! They are usually a buck or two more each cable... Thanks for the link Bakis! To: SergeModular@yahoogroups.com From: synth_freak_2000@... Date: Fri, 7 Mar 2008 14:03:20 -0800 Subject: Re: [SergeModular] Where to buy Pomona patch cords? here is from wh
2008-03-07 by Bakis Sirros
here is from where i have bought them, nice service and prices: http://www.testpath.com/Categories/Banana-Plug-Patch-Cords-PVC-Stacking-1835.htm best regards, Bakis. --- implode7@... wrote: > > I just ordered a bunch from mouser a couple of weeks > ago. You have to find them by t