Yahoo Groups archive
Messages
Page 4 of 22 · 1099 messages matched
2006-04-01 by mate_stubb
Paul, You should have a CD that came with it. There is a gif image on there with the wiring diagram. It has little numbers on it representing the header number and pin numbers. I found it a little confusing at first until I studied it for a half hour. As for the pots, you are jus
2006-04-01 by Paul Bower
> Also, one of the partials I shipped this week went to the U.K. > (The only > partial headed that way.) that was me - and it turned up this morning - thankyou not even any customs duty to pay... now i've got to drill my stooge panel, wire it up and work out how to load it up - s
2006-04-01 by Gary Chang
Paul Bower wrote: > > > anyone got an OS10.3 or 10.4 working with the PSIM ? i have a USB to > Serial cable (somewhere...) mike firman has recently posted somewhere saying that he has gotten the Mac to work with the PSIM via Virtual PC.... (his contact info should be listed in th
2006-04-01 by John Mahoney
Excellent news, Brice. Congrats and good luck with the new job. -- john
2006-03-31 by Brice D. Hornback
No need to cross your fingers Gregg. It's on the way. :) As Andrew mentioned, my work schedule is changing. Instead of one full-time and two part-time jobs (12 to 16 hours a day - usually six days a week)... I've accepted a position with a company that will allow me to work... re
2006-03-31 by Andris Tauvers
Sound like good news. I just have a few questions. How many partials are left to ship? How many complete units are left to ship? Are you guys still doing all partials and then complete units? Thses are the same questions that a large number of us would like to know and I think th
2006-03-31 by Andrew D Kirch
I've been out of the module-construction action for several weeks but good news that should expedite the completion of the remaining modules is on the horizon. Brice and I will have similar work schedules coming shortly which means potentially two days a week to work on modules i
2006-03-31 by mrboningen
mine is supposed to be a fully pre-built kit --- In SynthModules@yahoogroups.com, phil hendricks wrote: > > On 3/29/06 1:27 AM, "mrboningen" wrote: > > > i got an email from brice today saying mine had shipped, > > was yours a full module or a kit? have any of the full modules sh
2006-03-30 by phil hendricks
On 3/29/06 1:27 AM, "mrboningen" wrote: > i got an email from brice today saying mine had shipped, was yours a full module or a kit? have any of the full modules shipped yet? if not, Brice how many kits are left before you start shipping modules? best, phil
2006-03-29 by mrboningen
i got an email from brice today saying mine had shipped, but i won't believe it until i have it in my hands!!! i will of course let you all know if and when it arrives (usually about 7-10 days global priority mail from the states to japan) let's all keep our fingers crossed!!! gr
2006-03-28 by John Mahoney
At 05:30 AM 3/28/2006, Gary wrote: >Good to hear from you, Brice. > >Thanks for the update. Indeed. Keep on' solderin', Brice! I've gotten some interesting emails over the past few days. Although I'm still digesting them, there does appear to be a slow trickle of PSIMs to custome
2006-03-28 by Gary Chang
Good to hear from you, Brice. Thanks for the update. gary
2006-03-27 by Andrew Scheidler
Two more PSIM users are up and running after AHMW 2006 :) I gave some basic instruction and help to Dave and Bob, so now they're over that initial "how does this all work" stage. I was hoping Brice might sneak away from soldering to come to the party, but he probably got a few mo
2006-03-27 by Paul Bower
hey there, thanks for sticking your head over the parapet it's good to know things are progressing however slowly cheers paul On 27 Mar 2006, at 22:19, Brice D. Hornback wrote: > John, > > I'm still here. I've been working and building modules. I have > another one > I'm packagin
2006-03-27 by Brice D. Hornback
John, I'm still here. I've been working and building modules. I have another one I'm packaging up to ship tomorrow. I got five more ready for testing this past weekend. Please keep in mind the majority of the modules have already shipped. I'm working my way down the list. It is t
2006-03-25 by John Mahoney
>almost a month without word this time, can't say i'm surprised... This is absolutely incredible. We were [re]assured weeks ago that we could expect regular updates. This situation grows more serious with every unfulfilled promise. I have a feeling that some people want to say so
2006-03-25 by mrboningen
almost a month without word this time, can't say i'm surprised... --- In SynthModules@yahoogroups.com, ac wrote: > > Brice? > You've gone quiet again...please update us! > > > On 14/03/06, mrboningen wrote: > > > i'd also be very interested to know the answer to that question, >
2006-03-25 by hciassociates
Brice - please remember that at this point your updates are the only thing that enables many of us to hold out any hope of ever receiving the PSIM-1s we paid for. I'm confident I speak for others when I say that we're hanging on by less than a thread. Hearing from you makes all t
2006-03-20 by ac
Brice? You've gone quiet again...please update us! > On 14/03/06, mrboningen wrote: > > i'd also be very interested to know the answer to that question, > > another update please? > > > > gregg > > > > --- In SynthModules@yahoogroups.com, "Gary Chang" wrote: > > > > > > Hi, Brice
2006-03-14 by ac
likewise. On 14/03/06, mrboningen wrote: > i'd also be very interested to know the answer to that question, > another update please? > > gregg > > --- In SynthModules@yahoogroups.com, "Gary Chang" wrote: > > > > Hi, Brice. Just checking in on how you are doing - do you think that
2006-03-14 by mrboningen
i'd also be very interested to know the answer to that question, another update please? gregg --- In SynthModules@yahoogroups.com, "Gary Chang" wrote: > > Hi, Brice. Just checking in on how you are doing - do you think that > you will send the modules shortly? > > Gary >
2006-03-14 by Gary Chang
Hi, Brice. Just checking in on how you are doing - do you think that you will send the modules shortly? Gary
2006-03-06 by data2action
SynthModules members are invited to check out the new group: Comp uter Voltage Sources (http://launch.groups.yahoo.com/group/ComputerVoltageSources) Description: DIY-Oriented colaborative community for the design and programming of computer-controlled modular synth voltage source
2006-03-02 by Scott Stites
>(im just going by >the assumption that people who have highly demanding day jobs *normally* >have a wage to compensate?) Absolutely true. It helps to pay for all those marshmallow pies the rocking horse people have been eating. ________________________________________ PeoplePC O
2006-03-02 by laxt57@aol.com
Hi to All To those who have inquired http://launch.groups.yahoo.com/group/EFM_3500/?yguin=133070754 It is a new group. I am in the process of cloning some of the 3500 modules. Jeri [Non-text portions of this message have been removed]
2006-03-02 by rdrake
This is in process, and will be finalized this weekend. The scope will include code for both PSIM and the nascent SDIY project--my understanding is that there may be some overlap, if not full code compatibility. Again, this is intended only to add to the value of all of the proje
2006-03-02 by Julian
> I should add the Brice is invited to take any information from this new group and use it to > make a PSIM 2, should he choose to do. > > Being public domain, the information can be used by Brice to make a commercial product, > just like anyone else. > > He can even buy the PC b
2006-03-02 by kheck73@aol.com
In a message dated 3/1/2006 12:29:01 P.M. Eastern Standard Time, drmabuce@yahoo.com writes: Richard Harris!!!! Richard Harris!!!! Richard Harris!!!! oh noooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo -doc Dave Thomas as Richard Harris on SCTV's "Mel's Rockpile" _htt
2006-03-02 by Gary Chang
--- In SynthModules@yahoogroups.com, "drmabuce" wrote: > > Richard Harris!!!! > Richard Harris!!!! > Richard Harris!!!! > oh noooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo > > -doc well, ok... (I worked for Giorgio Moroder not long after Donna cut her track, so I a
2006-03-02 by laxt57@aol.com
Hi Mr. Richter It would be a simple thing to set up a yahoo group, I did the same for the EFM group when Mr.Gamble disappeared. I have wanted a programable interface like the PSIM-1. Was hoping SynthModules would sell me one at some point. Jeri In a message dated 3/1/2006 4:00:04
2006-03-02 by synthmodules
Jeri, I have not disappeared. - Brice --- In SynthModules@yahoogroups.com, laxt57@... wrote: > > Hi Mr. Richter > It would be a simple thing to set up a yahoo group, I did the same for > the EFM group when Mr.Gamble disappeared. > I have wanted a programable interface like the PS
2006-03-01 by john
> > I expect to see a new PC board which will use the Basic Atom Pro 28 pin version. .... Yessiree! (If only the 40-pin version would become a reality... whoa!) > > This will probably be a group effort of the SynthDIY guys. Indeed, the funny and talented Harry Bissell has already
2006-03-01 by Grant Richter
I should add the Brice is invited to take any information from this new group and use it to make a PSIM 2, should he choose to do. Being public domain, the information can be used by Brice to make a commercial product, just like anyone else. He can even buy the PC boards from who
2006-03-01 by Grant Richter
We need to set up a new site where we can take the discussion of new computer voltage sources based on the Basic Atom Pro. They will be backward code compatible with this design, but with improved I/O. When I designed the software architecture, I made sure to keep the I/O routine
2006-03-01 by Grant Richter
I have to admit, Brice did a nice job of packaging the computer controlled voltage source I designed. When Brice approached me for help, he sent me a drawing of a single space Frac-Rac panel with a single jack on it. His idea was that it was to be a source of complex gates sequen
2006-03-01 by synthmodules
That's why I put it back up the way it was. However, there are times though during the day here at work when I can tweak the code. That's what I was talking about. - Brice --- In SynthModules@yahoogroups.com, ac wrote: > > Brice, > > Please forget messing with code and finish bui
2006-03-01 by ac
Brice, Please forget messing with code and finish building and shipping the modules. The code, right now, means nothing to most of us. Thank you. ac On 01/03/06, synthmodules wrote: > Bob, > > I believe this is unnecessary. I have already re-opened the "Files" > section of this g
2006-03-01 by drmabuce
Richard Harris!!!! Richard Harris!!!! Richard Harris!!!! oh noooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo -doc --- In SynthModules@yahoogroups.com, "Gary Chang" wrote: > > --- In SynthModules@yahoogroups.com, "drmabuce" wrote: > > > > (sigh) > > (cue scratchy copy
2006-03-01 by Larry T.
Brice I am one of many that is hoping to get a PSIM in a future release. This due to the fact that you were not taking any more orders by the time I stumbled into the PSIM. I would like to make an observation, if I may be so bold. I believe that it would be in the best interest o
2006-03-01 by synthmodules
Bob, I believe this is unnecessary. I have already re-opened the "Files" section of this group to members so everyone can upload/download code again. The files there are in their original form without change. They are as the authors uploaded them. I have also noted that *all* PSI
2006-03-01 by rdrake
Brice, I am in the process of setting up a site where users of your product can discuss and share code. To avoid some of the current issues regarding ownership and licensing, I propose that the actual authors of the individual programs post their own code, and will leave it to th
2006-03-01 by synthmodules
Gary makes a good point. My intentions were good and I was trying to make it in the best interest of the community (although it seems that was misunderstood). Anyway, I am in the process of changing the headers on all the code to reflect ALL PSIM-1 code is PUBLIC DOMAIN. Please n
2006-03-01 by Gary Chang
--- In SynthModules@yahoogroups.com, "drmabuce" wrote: > > (sigh) > (cue scratchy copy LP of "MacArthur Park *quietly* in background) > Doc, Which version - the orignal Richard Harris or the Donna Summers disco version? 8'} gc
2006-03-01 by Gary Chang
"synthmodules" wrote: > > > I'm pretty emotional about this too. I feel like I've let a lot of > people down by taking so long to get them their modules. > > - Brice Brice, Certainly, it is uncomfortable for you to be in your position, being the receiver of these negative comment
2006-03-01 by Grant Richter
> It's good to hear from you. Yes, I can find 5 minutes a week to post. > I just sometimes get wrapped up in building and sometimes sleeping. > There are 36 PSIM-1 modules "out in the wild" so that's more than a > handfull. Where is everyone who has one? Two years ago, you told m
2006-02-28 by john mahoney
----- Original Message ----- From: "Andrew Scheidler" > > Made some horrible noises last night: > > http://www.ph.k12.in.us/~drew/noise/horrbl01.mp3 > > [snip] > > Enjoy :) I did. It sounds, umm... good! -- john
2006-02-28 by drmabuce
Hello everyone again i'm embarrassed to be emerging from my hole after publicly promising to return there and stay but there are a couple of statements contained here in that are presented calmly as facts that are not entirely accurate from where i sit. and i decided that this di
2006-02-28 by john mahoney
Well, sometimes a fire has to be lit under a person's feet. Thanks for speaking up, Brice! Certainly you can understand that spending 5 minutes a week posting a status report would have avoided this flare-up of emotions. Even if that post was something like "I had to work lots of
2006-02-28 by Andrew Scheidler
Made some horrible noises last night: http://www.ph.k12.in.us/~drew/noise/horrbl01.mp3 Uses Metalbox Sequential Switch (providing slow changes to VCO #1) Blacet EG-1 (lag) Blacet VCO (x2) PSIM-1 (providing analogue to digital destruction) Blacet Quad VCA (rapid PSIM-controlled wa
2006-02-28 by synthmodules
John, It's good to hear from you. Yes, I can find 5 minutes a week to post. I just sometimes get wrapped up in building and sometimes sleeping. There are 36 PSIM-1 modules "out in the wild" so that's more than a handfull. Where is everyone who has one? I'm pretty emotional about