How many u
2011-07-13 by weston_underwood
I just might need a new rack. How many u is the cirklon, looks about 3?
Messages
Browse messages
Page 6 of 168 · 8362 messages matched
Re: [analogue-sequencer] Re: CVIO option overkill for one mono synth? Opinions?
2011-07-12 by Paul Nagle
On 12/07/2011 20:19, John wrote: > Paul i've seen you mention you use Cirklon together with Logic. What's your exact setup + workflow? > Is it Cirklon midi ins/ outs direct to your hardware synths, with Logic MTC sync to Cirklon, with Logic recording audio? > Thanks. I don't do v
Re: CVIO option overkill for one mono synth? Opinions?
2011-07-12 by John
--- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: > If anyone's interested I have a Kenton Pro2000 for sale or swaps. Just > don't seem to need it now, especially as Cirklon can also work as a > MIDI/USB interface driving synths on my iPad. :) > > Paul Paul i've seen y
RE: [analogue-sequencer] Re: Cirklon: P3 + CK pattern length question
2011-07-11 by Colin f
> Can you record an unquantised part to a CK pattern, and what > is the ppqn resolution for a CK pattern? You can only record un-quantised at the moment. There is real-time quantise at the track level, so you can set it up so that whatever you record plays back quantised as soon
Re: Cirklon: P3 + CK pattern length question
2011-07-11 by John
> There is an event list editor, but it isn't as functional as the MPC one. > In fact, I'm looking at re-writing the event list editor to make it more > like the MPC, after having played around with an MPC60 for the first time a > few months ago. I've used an Akai ASQ10, so know
RE: [analogue-sequencer] Re: Cirklon: P3 + CK pattern length question
2011-07-11 by Colin f
> Is the CK side able to record and edit in depth, > cut/paste/copy etc as say on an Akai MPC? > Could the CK pattern side replace a linear hardware sequencer? Not yet, but it will before long. The primary function of the ck patterns was to support polyphonic drum patterns. I wor
RE: [analogue-sequencer] Cirklon: P3 + CK pattern length question
2011-07-11 by Colin f
> Can you have one CK pattern, being recorded/played over the > top of a number of P3 patterns, or do CK and P3 patterns both > have to be the same length? Patterns can all be different lengths. They each start at the beginning, and loop at their own length. P3 patterns have an o
Re: Cirklon: P3 + CK pattern length question
2011-07-11 by John
Thanks for your quick reply Colin. I understand that P3 patterns are for the step seq side and that CK patterns can be used for recording chords/basslines/leads etc in a linear fashion. Is the CK side able to record and edit in depth, cut/paste/copy etc as say on an Akai MPC? Cou
Cirklon: P3 + CK pattern length question
2011-07-11 by John
Can you have one CK pattern, being recorded/played over the top of a number of P3 patterns, or do CK and P3 patterns both have to be the same length? John
Re: [analogue-sequencer] CVIO option overkill for one mono synth? Opinions?
2011-07-11 by Paul Nagle
On 11/07/2011 08:59, Ian Mantripp wrote: > Can Cirklon also be used to record audio into Logic (or other) ? Audio? How do you mean? (it's not an audio interface if that's what you meant). -- Paul --- http://www.softroom.co.uk http://www.youtube.com/WilyEPeyote
Re: [analogue-sequencer] CVIO option overkill for one mono synth? Opinions?
2011-07-11 by Ian Mantripp
Can Cirklon also be used to record audio into Logic (or other) ? Ian On Monday 11 July 2011 at 09:55, Paul Nagle wrote: > If anyone's interested I have a Kenton Pro2000 for sale or swaps. Just > don't seem to need it now, especially as Cirklon can also work as a > MIDI/USB interf
Re: [analogue-sequencer] CVIO option overkill for one mono synth? Opinions?
2011-07-11 by Paul Nagle
If anyone's interested I have a Kenton Pro2000 for sale or swaps. Just don't seem to need it now, especially as Cirklon can also work as a MIDI/USB interface driving synths on my iPad. :) Paul On 08/07/2011 17:12, James R. Coplin wrote: > A Kenton Pro Solo new is 116ukp and the u
More Cirklon Sequencing...
2011-07-10 by Ditton33
Just posted another track on my Soundcloud, again sequencing provided by the Ciklon (& 1 track P3). No computer sequencing, computer only used for multitrack audio recording. http://soundcloud.com/emp3 [Non-text portions of this message have been removed]
Re: Break out box
2011-07-10 by weston_underwood
I meant the rack mount of course. --- In analogue-sequencer@yahoogroups.com, "weston_underwood" wrote: > > Hi > > Just seen the breakout box prototype. Looks good. Just wondered if it would be out of the question to have the DB25 mounted on the back of the box and then the rear c
Break out box
2011-07-10 by weston_underwood
Hi Just seen the breakout box prototype. Looks good. Just wondered if it would be out of the question to have the DB25 mounted on the back of the box and then the rear connected to the circuit board and sockets via an internal connector. That would allow the faceplate to be chang
Re: CVIO option overkill for one mono synth? Opinions?
2011-07-10 by John
--- In analogue-sequencer@yahoogroups.com, "Barbara Fraser" wrote: > I don't foresee a problem with that John. > Once we've looked at the costs for the various CVIO options, I'll publish a > price for the CVIO option excluding the break-out box. Taking this further, and getting b
RE: [analogue-sequencer] Re: CVIO option overkill for one mono synth? Opinions?
2011-07-10 by John L Rice
Awesome, thanks! From: analogue-sequencer@yahoogroups.com [mailto:analogue-sequencer@yahoogroups.com] On Behalf Of Barbara Fraser Sent: Saturday, July 09, 2011 5:05 PM To: analogue-sequencer@yahoogroups.com Subject: RE: [analogue-sequencer] Re: CVIO option overkill for one mono s
RE: [analogue-sequencer] Re: CVIO option overkill for one mono synth? Opinions?
2011-07-10 by Barbara Fraser
I don't foresee a problem with that John. Once we've looked at the costs for the various CVIO options, I'll publish a price for the CVIO option excluding the break-out box as I think a few other customers may also opt to go down the roll-your-own route. Cheers Barbara
RE: [analogue-sequencer] Re: CVIO option overkill for one mono synth? Opinions?
2011-07-09 by John L Rice
Hi Barbara, Will it be possible to purchase the Cirklon with the CVIO circuit board and 25 pin connector installed but and without the breakout box? When I do manage to buy one, for my rack I'll be making a custom 19 rack mount panel that will include connections etc for other d
Re: CVIO option overkill for one mono synth? Opinions?
2011-07-09 by Barbara Fraser
Hi Guys A technical reply from me, while the boss is away this weekend ;) The CVIO model requires the CVIO circuit board to be fitted inside the Cirklon, and the 25 pin connector needs fitted in place of the blanking plate on the back. The break-out box is also included in the £2
Re: CVIO option overkill for one mono synth? Opinions?
2011-07-09 by John
--- In analogue-sequencer@yahoogroups.com, "Barbara Fraser" wrote: > The CVIO model requires the CVIO circuit board to be fitted inside the > Cirklon, and the 25 pin connector needs fitted in place of the blanking > plate on the back. The break-out box is also included in the £20
Re: CVIO option overkill for one mono synth? Opinions?
2011-07-09 by John
--- In analogue-sequencer@yahoogroups.com, "samfrigard@..." wrote: > > I was recently told that it is easy for the user to install the cvio upgrade at a later date. That's what I plan on doing. With the "CVIO upgrade" meaning to add the 25 pin d-connector to the back of Cirklon?
Re: [analogue-sequencer] Re: CVIO option overkill for one mono synth? Opinions?
2011-07-09 by Ian Mantripp
ok, so the next question is: can the CVIO option be ordered and (easily) installed on site or does the Cirklon need to go back to Sequentix ? Ian On Saturday 9 July 2011 at 14:19, Ditton33 wrote: > No pin connector with the standard cirklon, just a blanking plate. > > I'm not sur
Re: CVIO option overkill for one mono synth? Opinions?
2011-07-09 by samfrigard@ymail.com
I was recently told that it is easy for the user to install the cvio upgrade at a later date. That's what I plan on doing. --- In analogue-sequencer@yahoogroups.com, Ian Mantripp wrote: > > ok, so the next question is: can the CVIO option be ordered and (easily) installed on site
RE: [analogue-sequencer] Re: CVIO option overkill for one mono synth? Opinions?
2011-07-09 by Ditton33
No pin connector with the standard cirklon, just a blanking plate. I'm not sure but it probs can be retro fitted. It you are remotely interested in cv then having this fitted is a no-brainer. And yes the extra cost does cover the break-out box I believe. > >-----Original Message-
Re: CVIO option overkill for one mono synth? Opinions?
2011-07-09 by John
Can someone clarify what exactly the extra £200 for the CVIO Cirklon gets you? Is it a) a 25-pin D-connector on the rear panel of the sequencer or b) an actual external break box ? If the standard Cirklon (£999) comes with the 25 pin connector, then it must be possible to "upgrad
Re: CVIO option overkill for one mono synth? Opinions?
2011-07-09 by John
Thanks James. I've realised apart from it's CV/Gate output, the Kenton Pro Solo Mk2 also outputs din sync, and 12, 24, or 48 clocks per quarter note which will be essential to drive my LM2 (48 cpqn). These extras, plus the cash saving are steering me towards the CVIO less Cirklon
RE: [analogue-sequencer] CVIO option overkill for one mono synth? Opinions?
2011-07-08 by James R. Coplin
A Kenton Pro Solo new is 116ukp and the upcharge on the Cirklon is 200ukp. They are a little different but it seems the price differential is close enough to make the CVIO option reasonable and if you get a modular rig or some other monosynth in the future you are already hooked
Re: [analogue-sequencer] re: last of the production run?
2011-07-08 by Paul Nagle
On 08/07/2011 10:51, THX1742 wrote: > Hi there, > > does this mean the last of the first batch or the last full stop? The first batch. > As someone who hasn't been in a position to order one but do have one on my wishlist does that mean when I am in a position to buy I'll be look
CVIO option overkill for one mono synth? Opinions?
2011-07-08 by John
I've five midi synths and one CV/Gate mono SH101 and just wondering if the Cirklon CVIO option would be overkill.... and an expensive way of sequencing just that one synth via this method? I may add another mono at a much later date, but that's only 50/50 chance. Also the CV brea
re: last of the production run?
2011-07-08 by THX1742
Hi there, does this mean the last of the first batch or the last full stop? As someone who hasn't been in a position to order one but do have one on my wishlist does that mean when I am in a position to buy I'll be looking on ebay - arrgghhh. Best wishes, looks like another amazi
Cirklon on facebook + SoundCloud
2011-07-07 by Barbara Fraser, Sequentix
Hi Guys Just a quick note to mention that we recently set up a Cirklon page on facebook where we've uploaded some tracks from new Cirklon customers. Feel free to drop by and "like" us :) http://www.facebook.com/#!/pages/Cirklon-by-Sequentix-Music-Systems/272395719156 We also have
Cirklon delivery schedule
2011-07-07 by Colin Fraser
Hi Folks, Those of you still waiting on delivery of a Cirklon, my apologies for the delay. The end of the run has been held up waiting for the user-interface boards from my PCB supplier. After ordering all the boards in early March, on a "6 to 8 week" lead time, I finally got con
Please vote for Sensitive Chaos in Best of ATL 2011 poll
2011-07-02 by jimcombsus
http://posting.clatl.com/atlanta/Survey Best of Atlanta 2011 Survey ends August 1 at 12:00 AM. Each year, Creative Loafing, Atlanta's weekly news magazine/paper, conducts a reader's and critic's poll of things that are the Best in Atlanta for the previous year. For us Atlanta mus
P3 Sequencer on ebay starting at 99p
2011-06-30 by Peter
Hi Everyone My P3 is on ebay starting at 99p with shipping to European Union and USA. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200624009919&ssPage\ Name=STRK:MESELX:IT#ht_3173wt_1141 Pete [Non-text portions of this message have been removed]
Re: cirklon cirkus
2011-06-29 by analogback
Oh also, in regards to the cv gate ports and aux cvs, are they able to handle hz/v, v/oct, and various trig/gate voltages & types or just standard cv/gate? cheers, gab --- In analogue-sequencer@yahoogroups.com, "analogback" wrote: > > looking fwd to the day i order a cirklon, 'ti
cirkus
2011-06-29 by analogback
looking fwd to the day i order a cirklon, 'till then i have a question on the encoders as i have had to replace a few recently in my other newish digital devices.. what are the rev/lifetime specs on paper for them? for example some of the click/turn encoders seem to be rated arou
Re: Quiet around here
2011-06-26 by weston_underwood
Thanks Colin, I'm happy to wait. I appreciate you can only do so much. My comment was really an inefficient way of saying that my guess is that more information may be starting to appear on the beta group rather than this one and that getting to read to the posts, even if I could
Sensitive Chaos 'Seeker After Patterns' video posted
2011-06-24 by jimcombsus
A video for the title track of my new Sensitive Chaos 'Seeker After Patterns' CD has been posted at YouTube. Lots of P3-driven synths and drum machines! Motion visuals by the wonderfully whimsical Michael O'Bannon. And cover art by the magically mysterious Demi Pietchell. http://
Message 8071
2011-06-23 by D
I am still here too ... I am wondering, are machines shipping by invoice number or by serial number? I have invoice number 64 and serial number 102. I suspect I may be waiting a while yet tho... Thanks D_niel Sent from my iPhone Sent from my iPhone [Non-text portions of this mess
RE: [analogue-sequencer] Re: Quiet around here
2011-06-23 by Ditton33
Yay I'm #65 Tho I haven't had an email to say it has shipped. Tho no sweat, I'm sure it will be worth the wait. :) > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequencer@yahoogroups.com] On Behalf Of Colin Fraser > >Sent: 23 June 2
RE: [analogue-sequencer] Re: Quiet around here
2011-06-23 by Colin Fraser
Hi, Units up to number 65 are being readied to go out today. The next batch (up to no. 74) just need final assembly, so will go out early next week. I'm going as fast as my eyesight and back allow. Thanks for being patient. Best regards, Colin Fraser Sequentix Music Systems Ltd h
Re: [analogue-sequencer] Re: Quiet around here
2011-06-23 by hans wurst
same here... can anyone tell on which number were right now? cheers kris --- On Wed, 6/22/11, Ian Mantripp wrote: From: Ian Mantripp Subject: Re: [analogue-sequencer] Re: Quiet around here To: analogue-sequencer@yahoogroups.com Date: Wednesday, June 22, 2011, 4:40 PM Hey Mike, yo
Re: [analogue-sequencer] Re: Quiet around here
2011-06-22 by Ian Mantripp
Hey Mike, you're not alone... still waiting for n° 81 here. Luckily I have my MAQ 16/3 to play with during the long cold wait. Keep the faith, Ian On Wednesday 22 June 2011 at 22:20, weston_underwood wrote: > > > --- In analogue-sequencer@yahoogroups.com (mailto:analogue-sequence
Re: Quiet around here
2011-06-22 by weston_underwood
--- In analogue-sequencer@yahoogroups.com, "duncan" wrote: > > I've had a cirklon for a while, & it's brilliant. get one. but I'm still deeply fond of my P3s, & quite recently pestered colin for a change to 4.5 to make programming chords easier. I hope he doesn't abandon the P3 t
Re: Quiet around here
2011-06-22 by duncan
I've had a cirklon for a while, & it's brilliant. get one. but I'm still deeply fond of my P3s, & quite recently pestered colin for a change to 4.5 to make programming chords easier. I hope he doesn't abandon the P3 too soon.... :-) duncan. (my name is duncan, & I'm a hardwareseq
Quiet around here
2011-06-22 by weston_underwood
I take it the rest of you are having fun on the beta software site whilst I'm left on my own here. Last man in the world without a Cirklon. Any news on how they're going? Go on really upset me by telling me how much fun you're having!
New Sensitive Chaos album is featured on this week's Hearts of Space
2011-06-18 by jimcombsus
The 4th song ("L'Ascension") from my new Sensitive Chaos 'Seeker After Patterns' CD is featured on this week's Hearts of Space radio program, which aired last night on Atlanta's WABE 90.1FM, but also airs on 200+ public radio stations at different times around the country (check
Re: eventual Cirklon documentation
2011-06-16 by dede
just to let you know: I've set up a test wiki environment (mediawiki), link and discussion can be found at the cirklon-beta group. cheers, roman
RE: [analogue-sequencer] Re: Cirklon first experiment
2011-06-14 by Colin f
> Salut! I have polluted it already, as you probably knew I would. :) Yep, saw that as I was trying to work out how to invite you. It seems anyone can join the group, unless I can find some security settings. If there isn't yet an audio spam problem on soundcloud, then I don't su