Yahoo Groups archive
Messages
Page 8 of 168 · 8362 messages matched
2011-05-27 by Colin Fraser
> So has anyone received theirs yet? I had some communications > indicating that they were shipping in May, but it's been > quiet since then. Sorry for the quietness, it has been very busy here, but not a huge number of units shipped so far. We got held up on a couple of rework i
2011-05-27 by Tom Adam
Yep, same here. ToAd Op 27-5-2011 13:19, tmoravan schreef: > > So has anyone received theirs yet? I had some communications > indicating that they were shipping in May, but it's been quiet since then. > > [Non-text portions of this message have been removed]
2011-05-27 by tmoravan
So has anyone received theirs yet? I had some communications indicating that they were shipping in May, but it's been quiet since then.
2011-05-26 by John
Hi Paul, Thanks for looking into this !!.... > I had a quick whizz through connecting hardware synths to my Mac then > routing Cirklon's output into it.... > > > I guess the easiest and most helpful thing would be to see if you can > > sequence a hardware synth through Logic, usi
2011-05-26 by Paul Nagle
Hi John, I had a quick whizz through connecting hardware synths to my Mac then routing Cirklon's output into it.... > I guess the easiest and most helpful thing would be to see if you can > sequence a hardware synth through Logic, using Cirklon? OK, no problem doing this. Cirklon
2011-05-24 by John
--- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: > I see from my inbox I was going to formally test using Cirklon as a MIDI > input to drive various soft/hard synths in Logic. I really must get more > organised and do that, sorry! I'm sure it'll work as I did it month
2011-05-24 by Colin Fraser
> I *think* one of the testers is using the USB connection to > route MIDI into Cirklon then redirect it to connected MIDI > instruments. Not quite yet... I've upped the number of MIDI ports on the USB connection to 6 to support it, but haven't enabled the thru mode for it yet. I
2011-05-24 by Paul Nagle
On 24/05/2011 08:42, weston_underwood wrote: > This is possibly a daft question but here goes! I have my synth midi cables running to a motu 128 8 way midi box and some others connected to a 2x2 and another connected to the port on an interface. Is there any way of avoiding the n
2011-05-24 by weston_underwood
This is possibly a daft question but here goes! I have my synth midi cables running to a motu 128 8 way midi box and some others connected to a 2x2 and another connected to the port on an interface. Is there any way of avoiding the need for plugging and unplugging the whole time
2011-05-15 by Colin Fraser
> Does this BOB include a PCB? Is it just routing or are there > also some 'active' components included? It will include a PCB, but no active components. PCBs are the least labour-intensive way to wire 25 sockets together. > What is the pin-out of the SUB25 plug? > Any pic's or d
2011-05-15 by Tom Adam
I was thinking some more about the BOB the other day... Does this BOB include a PCB? Is it just routing or are there also some 'active' components included? What is the pin-out of the SUB25 plug? Any pic's or drawings of this BOB somewhere? When my Cirklon arrives I'm going to ge
2011-05-10 by em_dkj
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > I'll need to check with the author if this is likely to be the problem, and whether it would be 5 minutes or 5 weeks to fix it. Yep; That change will give P3Tools2 quite a headache. I'm afraid its definitely a lot
2011-05-06 by Colin Fraser
> The wiki is not meant to be a replacement for a printed (or > pdf) manual, but as an easy collaborative information sharing > and writing tool. That's how I was looking at it. > I have written such a script before which also added the > InDesign styles markup. Once the layout t
2011-05-06 by ianmantripp
--- In analogue-sequencer@yahoogroups.com, "tmoravan" wrote: > > pardon my ignorance, but is there an easy way to go from an on-line Wiki format to a double-sided 8.5x11 (or A4) printed format that can be put in a ring binder and used without a computer nearby? > The wiki is not
2011-05-05 by Colin Fraser
> pardon my ignorance, but is there an easy way to go from an > on-line Wiki format to a double-sided 8.5x11 (or A4) printed > format that can be put in a ring binder and used without a > computer nearby? That would probably be a manual job for me. Best regards, Colin Fraser Sequ
2011-05-05 by Richard Scott
I agree that a WiKi would be better. We can all mess it up and Colin can get on with the crazy shit we are paying him for? Cirklon is still in mid flight Richard
2011-05-05 by Paul Nagle
On 05/05/2011 15:38, Colin Fraser wrote: > I need to stop adding stuff for a bit, and write down what's there already. Please don't. Happy to help folks through the early days of their machines as you continue doing things. Which reminds me, I was meant to verify some Logic/USB M
2011-05-05 by Colin Fraser
> Colin - being a sw developer myself, I know that > documentation is often the last thing on the list and the > most loathesome of tasks. Possibly more accurate to say it's the first thing on the list, but the last to get done :-) I have some sections of the Cirklon manual start
2011-05-05 by tmoravan
pardon my ignorance, but is there an easy way to go from an on-line Wiki format to a double-sided 8.5x11 (or A4) printed format that can be put in a ring binder and used without a computer nearby? --- In analogue-sequencer@yahoogroups.com, "ianmantripp" wrote: > > > > --- In anal
2011-05-05 by Mark Morton
While I appreciate the videos, I would like to add my voice to the chorus -I rely on documentation in learning instruments and i find that , even for boutique intruments, , lack of or poor documentation can often harm the product well beyond the developers expectation. Other than
2011-05-05 by ianmantripp
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > The idea of Wiki-based documentation does appeal. > Not as the sole source - I fully intend to print up manuals. > A ring binder containing a snapshot of Wiki-based documentation in a > print-friendly format mig
2011-05-05 by ianmantripp
How about setting up a wiki instead of MS Word... much more sharing friendly ;-) Ian --- In analogue-sequencer@yahoogroups.com, "tmoravan" wrote: > > Colin - being a sw developer myself, I know that documentation is often the last thing on the list and the most loathesome of task
2011-05-05 by tmoravan
Colin - being a sw developer myself, I know that documentation is often the last thing on the list and the most loathesome of tasks. I have a proposal - would it be possible to provide a general outline of a document in some standard format (MS Word for example), along with point
2011-05-04 by Simon Carbonnel
Thanks a lot for your reply and your research!! Simon To: analogue-sequencer@yahoogroups.com From: colin@sequentix.com Date: Wed, 4 May 2011 17:11:00 +0100 Subject: RE: [analogue-sequencer] P3 tools for sequentixP3 Hi Simon, > I am preparing a set with > several patterns that I c
2011-05-04 by Colin Fraser
Hi Simon, > I am preparing a set with > several patterns that I could follow up. The problem is that > my patterns are in the wrong order. I therefore wish to use > P3tools to rearrange my patterns. I have no problems during > the transfer, the problem is copying patterns around
2011-05-04 by Simon Carbonnel
Hi Colin, thanks for your reply, I am preparing a set with several patterns that I could follow up. The problem is that my patterns are in the wrong order. I therefore wish to use P3tools to rearrange my patterns. I have no problems during the transfer, the problem is copying pat
2011-05-04 by Colin Fraser
Hi Simon, > I send you this message because I have a problem with P3TOOLS > (version 2). I can not copy normally bank on a site. It still > lacks some common patterns.Is this normal? Is there a manip > installation do? I appreciate it can be difficult to explain a technical probl
2011-05-04 by Simon Carbonnel
Hello! I send you this message because I have a problem with P3TOOLS (version 2). I can not copy normally bank on a site. It still lacks some common patterns.Is this normal? Is there a manip installation do? Thanks a lot for this excellent machine. You can hear what i do on www.m
2011-05-02 by cormallen
Hi Colin, just joined the group... > Cirklon appears as a class-compliant MIDI interface with 4 ports (which I > may increase to support a direct pass-thru mode to the hardware ports). This! What I'd like to be able to do is have all the MIDI from the DAW to my synths going throu
2011-04-29 by jimcombsus
Friday and Saturday, April 29th and 30th, 2011 City Skies Electronic Music Festival @ Kavarna in Decatur, GA. The City Skies Electronic Music events showcase the region's best electronic musicians at our favorite venue, Kavarna, for listening to a great range of electronic music
2011-04-22 by DB
Hmm.. I guess I wouldn't be selling my P3 to get a Cirklon then... :) Thx for the info. Hopefully , this is something that Colin is able provide! Thx, Dave On 4/20/2011 12:05 AM, Ditton33 wrote: > > Hmm yahoo broke that link try this... > > http://tinyurl.com/68bapd9 > > > >-----
2011-04-22 by Colin f
> Where is this build ? or is it by request :) http://www.sequentix.com/sq_download.htm Cheers, Colin
2011-04-22 by fb0y2002
--- In analogue-sequencer@yahoogroups.com, "duncan" wrote: > > update- colin's created a version of 4.5 that limits the aux note range to the same range as the "base" note. in all other respects, the build is the same as the last 4.5. > d. > > --- In analogue-sequencer@yahoogroup
2011-04-22 by Paul Nagle
On 22/04/2011 12:04, John wrote: > Hi Paul, > I guess the easiest and most helpful thing would be to see if you can sequence a hardware synth through Logic, using Cirklon? So check whether Logic can work as a thru? I'm sure it does as I can play a hardware synth via my keyboard a
2011-04-22 by Colin Fraser
> If slaving the Cirklon clock to a DAW, does it impact the > Cirklon's timing precision? That depends if you use MIDI clock or MIDI timecode. For MIDI clock, the tempo is determined by the time between each clock tick. There will inevitably be some jitter on MIDI bytes sent by a
2011-04-22 by Paul Nagle
On 22/04/2011 09:58, John wrote: > Logic's environment is a place i'd like to avoid to be honest. I'm still thinking it possible to assign Cirklon midi outs to each instrument in the arrange page by changing that setting in each ones inspector setting. > However only Cirklon, and
2011-04-22 by John
--- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: Is there > anything specific I could try out for you? > > -- > Paul > --- > http://www.softroom.co.uk > http://www.youtube.com/WilyEPeyote > Hi Paul, I guess the easiest and most helpful thing would be to see if you can
2011-04-22 by Ditton33
Probably a stupid question sorry. If slaving the Cirklon clock to a DAW, does it impact the Cirklon's timing precision? Also, anyone tried it with Ableton yet? > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequencer@yahoogroups.com]
2011-04-22 by John
--- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: I haven't touched it much since > those days either as I've found anything that pushes Logic too hard in > directions it's unhappy with tends to make it fall over. YMMV. > > -- > Paul Logic's environment is a place i'd
2011-04-22 by Paul Nagle
On 21/04/2011 23:59, John wrote: > Edit to my last message.. > You're saying that through the environment you should be able to set up both Logic and Cirklon to control hardware synths. Logic's environment is a very old and slightly creaky part of the program. It has great power
2011-04-21 by Tony Scharf
You should be able to route all of that through the environment. On Apr 21, 2011 4:20 PM, "John" wrote: > > > --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > >> As Paul said, it will also send pattern output to a MIDI USB port. >> I've tried it out with VSThost
2011-04-21 by John
--- In analogue-sequencer@yahoogroups.com, Tony Scharf wrote: > > You should be able to route all of that through the environment. Edit to my last message.. You're saying that through the environment you should be able to set up both Logic and Cirklon to control hardware synths.
2011-04-21 by Colin f
> I can't reproduce the symptom at home, using a very similar > set-up with the same s/w on the P3 & an identical motu > router. so I think maybe I imagined the whole thing, being as > I had a mixture of attack times on the instruments concerned. I think you'll find imaginary bug
2011-04-21 by Colin Fraser
> On 21/04/2011 21:14, John wrote: > > How will the USB port on the Cirklon allow you to integrate > with a DAW? > > Will this just be for standard midi clock sync between the > two, or will you be able to sequence synths in your DAW > environment direct from the Cirklon? > > I'v
2011-04-21 by Paul Nagle
On 21/04/2011 21:14, John wrote: > How will the USB port on the Cirklon allow you to integrate with a DAW? > Will this just be for standard midi clock sync between the two, or will you be able to sequence synths in your DAW environment direct from the Cirklon? I've sequenced soft
2011-04-21 by John
--- In analogue-sequencer@yahoogroups.com, Tony Scharf wrote: > > You should be able to route all of that through the environment. You'd probably not have to go that deep and could stay in the arrange page, since Apple have simplified things. Once Cirklon is added in OSX audio mi
2011-04-21 by John
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > As Paul said, it will also send pattern output to a MIDI USB port. > I've tried it out with VSThost running a few different plug-ins, and they > generally just seem to work. > Mostly. > > Best regards, > Colin Fra
2011-04-21 by John
How will the USB port on the Cirklon allow you to integrate with a DAW? Will this just be for standard midi clock sync between the two, or will you be able to sequence synths in your DAW environment direct from the Cirklon? An example of Cirklon and DAW integration would be usefu
2011-04-21 by duncan
>>I think that will probably be a bug for any pattern, rather than just a pattern using aux notes.
2011-04-20 by Colin Fraser
> having arrived at a multi-bar chord sequence I like, & while > the sequencer is running, I load the same saved pattern into > another track. > but it's not in sync with its "parent" until I > stop the P3 & start it again. I don't think it's a global bar > thing- it has tended t