Yahoo Groups archive
Messages
Page 9 of 168 · 8362 messages matched
2011-04-20 by THX1742
Thanks for the replies so far. Duncan, good to have those files, I'll have to think about whether to go for a 3U unit, but actually just to have pictures of the inside of a unit is helpful to me! Should've looked in the files area of the group of course, just that last time I loo
2011-04-20 by Ditton33
Hmm yahoo broke that link try this... http://tinyurl.com/68bapd9 > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequencer@yahoogroups.com] On Behalf Of Ditton33 > >Sent: 20 April 2011 07:46 > >To: analogue-sequencer@yahoogroups.com >
2011-04-20 by Ditton33
I think this arose on the muffwigglers forum where I was musing on how I'd drive a module using the P3 thru the Cirklon. I am still very much hoping this "control surface" P3 OS does come to fruition as it was part of the decision in my mind to go for the Cirklon. :) Have a look
2011-04-19 by DB
On 4/19/2011 1:01 PM, loophead_0 wrote: > > > With Colin's idea to have a new mode created to use P3 as an expanded > control surface for Cirklon... > What's this? I've been off list for a while and just starting to look into things... Can somebody forward me or give me a link to
2011-04-19 by loophead_0
Did not sell. Expanded to ship worldwide. http://cgi.ebay.com/Sequentix-P3-Sequencer-/260771397973?pt=LH_DefaultDomain_0&hash=item3cb72fc155#ht_500wt_1155 With Colin's idea to have a new mode created to use P3 as an expanded control surface for Cirklon... Thanks, Scott --- In ana
2011-04-19 by duncan
I've installed a tweaked version of 4.5 in both of my P3s. the tweak makes it easier to enter polyphonic patterns by limiting the range of the aux notes to match the "base" note. so if you set the note range parameters to (say) C4 & two octaves, the aux notes will be similarly co
2011-04-19 by duncan
files section here has a complete set of schaeffer files for the 3u versions I've made. see if they help any. there are some small mods needed to one PCB. duncan. --- In analogue-sequencer@yahoogroups.com, Tom Adam wrote: > > Well, I would like the file also. Preferably in a comp
2011-04-19 by Tom Adam
Well, I would like the file also. Preferably in a compatible autocad format;-) When I receive the cirklon, I'm planning on putting my P3 in a suitcase together with an analog mono syth I'm currently building. Unfortunately the suitcase isn't wide enough to reuse my current panel,
2011-04-19 by THX1742
Well, it's been great hearing about all the cirklon, no doubt when I've some cash I'll be investing, in the meantime - somehow please don't ask why it's taken so long- I've got a P3 build almost finished, I just need to craft an enclosure. I was wondering if anyone might have pla
2011-04-17 by t_natalini
Hi Colin, I orderded the CV I/O option. I'd like the rackmount version. Should send and email to Sequentix with the request? Thanks, T --- In analogue-sequencer@yahoogroups.com, "sequentix" wrote: > > Folks waiting on Cirklon orders, > > I've received the first batch of populated
2011-04-17 by Ian Mantripp
On Sunday 17 April 2011 at 18:34, Ditton33 wrote: > Thanks for the update Colin. > > Happy to be patient to ensure you personally quality-control each unit. :) > Same here ! I am happy that the thing is being sourced and built in Scotland ! Can't wait to get my hands on it :-) Ia
2011-04-17 by Ditton33
Thanks for the update Colin. Happy to be patient to ensure you personally quality-control each unit. :) > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequencer@yahoogroups.com] On Behalf Of sequentix > >Sent: 17 April 2011 16:56 > >
2011-04-17 by sequentix
Folks waiting on Cirklon orders, I've received the first batch of populated boards from the factory this week. The remainder of the boards should be with me next week, so assembly and shipping can start very soon. There has been a bit of a mix up with one of the boards, but that
2011-04-17 by sequentix
> Can anybody tell me where the nice buttons from the Cirklon come from and with what type of Cherry switch they work? They are UK made, and not widely distributed. The supplier I get them from doesn't like to sell you less than a thousand at a time. The keys are Cherry MX, same
2011-04-15 by echojordanfieldstation2
Hey, Can anybody tell me where the nice buttons from the Cirklon come from and with what type of Cherry switch they work? cheers Jef
2011-04-14 by anenomi303
Hi, I'm new to the forum and pretty new to making music - especially with analogue equipment. I bought a TB-303 (Hardfloor Acsperiance was one of the first tunes I ever lost it to) and would love to get the retrofit. Unfortunately I have no skill with with a soldering iron, and w
2011-04-09 by marco
i' selling my Akai cd3000xl on ebay http://cgi.ebay.es/ws/eBayISAPI.dll?ViewItem&item=280656520710&ssPageName=STRK:MESELX:IT# i'm including: 2 x ibm SCSI 1280mb harddrives. 2 x scsi card (1 adaptec) 1 x scsi cable (it was a very expensive cable) 4 x 16 mb ram ( 2 matching pairs).
2011-04-08 by Ditton33
OK, many thanks for the info Colin. :) > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequencer@yahoogroups.com] On Behalf Of Colin Fraser > >Sent: 07 April 2011 10:57 > >To: analogue-sequencer@yahoogroups.com > >Subject: RE: [analog
2011-04-07 by loophead_0
Hey guys - In case anyone is looking for a mint P3 I have this on Ebay. Location: Brooklyn NY Scott http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260765523869#ht_500wt_1131
2011-04-07 by Colin Fraser
> Are the CVIO aspects on the critical path for delivery timescales? > > And, if so, can the midi-only units be "fast-tracked" for delivery? :) MIDI-only units will start shipping as soon as they can. If the break-out boxes look like taking much longer than the main units, I may
2011-04-07 by Ditton33
Hi Colin Are the CVIO aspects on the critical path for delivery timescales? And, if so, can the midi-only units be "fast-tracked" for delivery? :) Cheers. > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequencer@yahoogroups.com] On B
2011-04-06 by Tom Adam
Op 5-4-2011 22:43, Hans Wurrrst schreef: > (The basic break-out box is included in the £1199 price for the CVIO > option.) > cheerskris OK, this is the first time I hear this. What does this basic break out box look like? Cheers, ToAd
2011-04-06 by Colin Fraser
> I have 3 synths that require +10v gates (Roland System 100 > 101 + 102, MiniKorg 700s), so this would be kind of a bummer. > Even the measly MFB Urzwerg offers +10v gates... no way this > could be addressed? The dedicated gate outputs also act as CV ins, so it's not possible to
2011-04-06 by solvent@interlog.com
>>>> Gates are 5V for high-level. I have 3 synths that require +10v gates (Roland System 100 101 + 102, MiniKorg 700s), so this would be kind of a bummer. Even the measly MFB Urzwerg offers +10v gates... no way this could be addressed?
2011-04-05 by Colin Fraser
> I have a couple of questions about the analogue outputs... > > Is there a Clock/start/stop CV option available? I haven't implemented it, but there's no reason why the gate (or even CV) outputs can't be configured to send clock. But there is a dedicated DIN sync output already.
2011-04-05 by Hans Wurrrst
hi tom,here are some answers colin already gave me: Let me give you some information about the CVIO option: The CVIO board has 16 CV (16-bit resolution) and 8 gate outputs. The CV outputs support volts/octave or hertz/volt mode, with glide. The gate outputs have a 5v high-level,
2011-04-05 by Tom Adam
Hi Colin, I have a couple of questions about the analogue outputs... Is there a Clock/start/stop CV option available? The CV coming out of the DB25 cable what voltage range do they have? (0-10V, -5/+5V,...) Same for the gates. Is there a way to synchronize the cirklon to an LFO?
2011-04-01 by Colin f
> > There are 'values' at the track level that allow you to send a > > combination of preset MIDI CC values and program changes > to instruments. > I guess that's what I'm after ! Can these values be recorded > or are they input manually ? At present they are input manually using
2011-04-01 by Ian Mantripp
On Friday 1 April 2011 at 11:52, duncan wrote: > >>currently hesitating between a RME Fireface UC and the MOTU 828 MKIII Hybrid. Does anybody here have any experience/thoughts with either of machines ? > you want it to do audio as well? the other thing to bear in mind is whether
2011-04-01 by duncan
update- colin's created a version of 4.5 that limits the aux note range to the same range as the "base" note. in all other respects, the build is the same as the last 4.5. d. --- In analogue-sequencer@yahoogroups.com, "duncan" wrote: > > chaps- > I've been using the P3 to play ch
2011-04-01 by duncan
>>currently hesitating between a RME Fireface UC and the MOTU 828 MKIII Hybrid. Does anybody here have any experience/thoughts with either of machines ?
2011-03-31 by Paul Nagle
On 31/03/2011 18:35, Ian Mantripp wrote: > I guess that's what I'm after ! Can these values be recorded or are they input manually ? You can record CCs into a Cirklon pattern but I confess I haven't tried recording a CC-type patch dump that way, for example. I tend to save the pr
2011-03-31 by Ian Mantripp
On Friday 25 March 2011 at 16:18, Colin Fraser wrote: > > > The last time I really did anything was about 18 years > > ago and then I just had a guitar and amp. So my knowledge of > > midi and other new(ish) niceties is just about nil, so please > > bear this in mind if I ask wha
2011-03-30 by duncan
chaps- I've been using the P3 to play chords a lot lately, & while this is fairly easy to achieve with the polyphonic recording capability & the aux note macro, I've found it difficult to edit or to directly enter the aux note values, because the resolution of the upper encoders
2011-03-26 by Colin Fraser
> Hello,i try to send a P3 image i ve stored ,in P3 tools to my > P3(all datas,config are wrong today ...?)i read ,"put the p3 > in received mode" is the same as the software upgrade ?if not > ,how can i do that ;-) Best regards Firmware update mode (holding FUNC + PAGE at power-
2011-03-26 by Bouncer
Hello,i try to send a P3 image i ve stored ,in P3 tools to my P3(all datas,config are wrong today ...?)i read ,"put the p3 in received mode" is the same as the software upgrade ?if not ,how can i do that ;-) Best regards
2011-03-26 by Colin Fraser
> 1) Cirklon OS: > is Cirklons OS much different than P3's ? Does reading the > latest P3 manual (aux events, yeah!) give me a valid > impression about Cirklons possibilities? Cirklon is a superset of P3. It has two pattern types, P3 and ck. The P3 pattern type is much the same a
2011-03-26 by dede
Hi I am very eager at getting a Cirklon - perfect midi timing and creative live tweaking facilities already rule out computers and mpc's :) Thanks a lot for the tutorial videos. Working with Cirklon seems really easy and intuitive. 1) Cirklon OS: is Cirklons OS much different tha
2011-03-25 by Colin Fraser
> The last time I really did anything was about 18 years > ago and then I just had a guitar and amp. So my knowledge of > midi and other new(ish) niceties is just about nil, so please > bear this in mind if I ask what may be a very silly or > obvious question. I guess you may not
2011-03-25 by duncan
no. your best bet is to slave it to something that does, via a merge box obviously, so you can still record into it from y'r keyboard. I have successfully used: mk1 electribes (usually ES-1) electrix repeater plotyech 3-4-1 pedal hth- duncan.
2011-03-24 by ianmantripp
Hello, This is my first post so I'll tell you a bit about myself first. I am getting back into music making after a long break. The last time I really did anything was about 18 years ago and then I just had a guitar and amp. So my knowledge of midi and other new(ish) niceties is
2011-03-24 by synthasy2000
...and here's some video of that event with Paul Nagle on the Cirklon... You can see the Cirklon as the first blinky lights box down from the visuals screen. http://www.youtube.com/watch?v=GJJfuX9FDgI Cheers Chris --- In analogue-sequencer@yahoogroups.com, "Jez Creek" wrote: > >
2011-03-18 by skylab001
The subject really says it all. For some reason I thought it did, but I can't find it if it does.
2011-03-18 by sapofjura
Hello. As I have two of these fine beasts I have decided that one is surplus to requirements. Both were "factory built" by Colin. The one I'd like to sell has a dead screen but I have a spare. I was planning on asking Colin to install it for me sometime, if he's so inclined, but
2011-03-17 by John
I see that the Cirklon is priced with two different options. One being "Cirklon model including CV option" What does "CV option" entail exactly? Must be going to an external unit housing CV/ Gate sockets? How many? What size? etc Thanks, John
2011-03-17 by Doug Wellington
> > http://www.amazon.com/The-Future-Art-Factory-ebook/dp/B004S3CZ44/ > > Aha, cheers Doug! I'm trying to remember if "P3" is mentioned anywhere > actually. I haven't read it in many years myself... anyway, apologies > for the Spam y'all. :) Sorry if I'm contributing further to t
2011-03-16 by Omar
sexy! love it. can't wait. nice work colin! On Tue, Mar 15, 2011 at 10:13 AM, Colin Fraser wrote: > > > > > Is that black LCD going to be used on the production version? > > It looks great! > > That's the plan. > White on black display, with green step LEDs. > > > Best regards, >
2011-03-16 by Paul Nagle
On 16/03/2011 15:14, Doug Wellington wrote: > Or, for those of us in the States, here's the link: > > http://www.amazon.com/The-Future-Art-Factory-ebook/dp/B004S3CZ44/ Aha, cheers Doug! I'm trying to remember if "P3" is mentioned anywhere actually. I haven't read it in many years
2011-03-16 by Doug Wellington
Or, for those of us in the States, here's the link: http://www.amazon.com/The-Future-Art-Factory-ebook/dp/B004S3CZ44/ Regards, Doug
2011-03-16 by Paul Nagle
DEAR FRENDS, I'm Mr Obogo of the NIGERIAN VERY GOOD BANK... Apologies. As you know I usually keep the spamming well under control, but here's something a little different from me. Friends, normals, countrymen... my first novel has been published today on Amazon! For the lowest po