Yahoo Groups archive
Messages
Page 11 of 168 · 8362 messages matched
2011-01-04 by t_natalini
I am interested in this as well, Colin. Thanks! --- In analogue-sequencer@yahoogroups.com, "random2393" wrote: > > greetings colin, I submitted my email address for the waiting list a back in late October and never received any confirmation of being put on the list. > > can you c
2011-01-04 by random2393
greetings colin, I submitted my email address for the waiting list a back in late October and never received any confirmation of being put on the list. can you check to see that I am on there and where I am in the overall list/time to ship? thanks! ps. the email address is the on
2011-01-03 by John
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > What was the figure of 2ms for on the Atari ? This was tested with Notator 3.1, with Log3 and Unitor2 interfaces plugged into the Atari. Notator was loaded with all tracks firing out 16ths. I'd wired a midi lead w
2011-01-03 by Colin Fraser
> What's the midi and CV timing like on the Cirklon? > I'm hoping that it'll be tighter than the USB midi seen on > most DAW's with their jitter and latency. > Are all Cirklon midi ports addressed in parallel so there's > no latency? Well I am pretty picky about timing. Each of t
2011-01-02 by duncan
>>What's the midi and CV timing like on the Cirklon?
2011-01-01 by John
What's the midi and CV timing like on the Cirklon? I'm hoping that it'll be tighter than the USB midi seen on most DAW's with their jitter and latency. Are all Cirklon midi ports addressed in parallel so there's no latency? Any real world timing figures? For example I once tested
2010-12-15 by Colin Fraser
> I am currently running V4... and spent a few > nights ago reading all about playlists... only to find out > the next morning that V4 didn't have them! V4 replaced playlists with multi-bar patterns. There is a fair degree of commonality between what you can do with these, though
2010-12-14 by keyboardcontrollers
Oh yeah.. And I have spent some time reading through the messages here and I did find a few that have Colin explaining V4.5. That is probably enough to get me through it this week, but I just wanted to raise the question in case there was other information out there that might he
2010-12-14 by keyboardcontrollers
I have had a P3 for about a week now and although I have nothing but the utmost respect for this device, I am having a bit of trouble here and there figuring out what part of the manual to follow, and what parts are no longer valid due to OS updates. I am currently running V4...
2010-12-13 by Paul Nagle
On 13/12/2010 04:55, Tony Scharf wrote: > I borrowed a Manikin Schrittmacher some time ago, and fell in love with the > way you could have one track play as an offset to another. Does the > Cirklon have any similar concept? I know from my brief ownership of one, > that it has acc
2010-12-13 by Tony Scharf
While people are asking questions and getting answers, I thought I would throw one out there. I borrowed a Manikin Schrittmacher some time ago, and fell in love with the way you could have one track play as an offset to another. Does the Cirklon have any similar concept? I know f
2010-12-12 by Paul Nagle
On 12/12/2010 20:41, watson wrote: > on the midi record can you quantize your performance after the fact? You can. -- Paul --- http://www.softroom.co.uk http://www.youtube.com/WilyEPeyote
2010-12-12 by watson
on the midi record can you quantize your performance after the fact? On Sat, Dec 4, 2010 at 6:02 PM, Paul Nagle wrote: > > > On 04/12/2010 22:33, klockwerk wrote: > > Is there a post somewhere as to Cirklon's features. I'm particularly > interested in the differences between the
2010-12-12 by von.haulshoven
http://t.co/zVbkIXL live with the schrittmacher. (and a few things with the maq 16/3) synths: virus a and b nord wave jp 8080 radias a station blofeld keys gaia and drums from the sp 555 I miss polysequencing (chords) and more stucture (song) so I want to add a circklon :-)
2010-12-11 by watson
hey colin, can the cirklon be used as a midi to cv converter? On Fri, Dec 10, 2010 at 8:33 PM, Colin Fraser wrote: > > > > > are we talking hundreds or thousands on the wait list? > > An estimate would be great to be able to update my > > expectation which since September has bee
2010-12-11 by Colin Fraser
> one quick question. will we be able to use the cirklon as a > midi to cv converter? im already sold but if i can do that it > will definitely save me a lot of money and space. The CV bus appears as if it were another MIDI in/out port with a CV convertor attached. The obvious di
2010-12-11 by Colin Fraser
> are we talking hundreds or thousands on the wait list? > An estimate would be great to be able to update my > expectation which since September has been "I'll have my > Cirklon for Christmas!" The waiting list is long enough that some will probably have to wait for the next pro
2010-12-07 by musicalgeometry
Colin, are we talking hundreds or thousands on the wait list? An estimate would be great to be able to update my expectation which since September has been "I'll have my Cirklon for Christmas!" --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > > > Hi. I know Co
2010-12-06 by watson
one quick question. will we be able to use the cirklon as a midi to cv converter? im already sold but if i can do that it will definitely save me a lot of money and space. On Mon, Dec 6, 2010 at 10:45 AM, Colin Fraser wrote: > > > > > Hi. I know Colin is busy constructing/beta te
2010-12-06 by johnplaiduk
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > Over the last week, I've arranged a camera setup to let me make > tutorial/demo videos for Cirklon, with a clear view of the UI and close-up > of the display. > The first fruits of that should be public later th
2010-12-06 by Colin Fraser
> Hi. I know Colin is busy constructing/beta testing etc but it > might be worth updating the web site (and this list;) with a > brief summary of the latest state of play. Yeah, that's a good point. > I'd love to know how many units are shipping per month and Not very many, so fa
2010-12-06 by musicalgeometry
I'd love to know how many units are shipping per month and how many people are on the wait list to buy a Cirklon. ;-) --- In analogue-sequencer@yahoogroups.com, "Ditton33" wrote: > > Hi. I know Colin is busy constructing/beta testing etc but it might be worth > updating the web s
2010-12-05 by Ditton33
Hi. I know Colin is busy constructing/beta testing etc but it might be worth updating the web site (and this list;) with a brief summary of the latest state of play. Esp the "factory units will ship in September" bit, even though they probably did, to beta testers. :) Cheers. [No
2010-12-05 by Herman Dackenberg
dear friend how are you doing recently ? i found a very good site : www.yang-fangfang2.com I bought an Apple laptop a week ago from this site. Now, I have been received. This product quality is very good. and price also very cheap. They also sell mobile phones, television sets, m
2010-12-04 by Paul Nagle
On 04/12/2010 22:33, klockwerk wrote: > Is there a post somewhere as to Cirklon's features. I'm particularly interested in the differences between the Cirklon and P3 (besides the CV/gate). What can the Cirklon do that the P3 can't, or is it still a bit early to ask? More tracks,
2010-12-04 by klockwerk
Is there a post somewhere as to Cirklon's features. I'm particularly interested in the differences between the Cirklon and P3 (besides the CV/gate). What can the Cirklon do that the P3 can't, or is it still a bit early to ask? Thanks.
2010-12-04 by jimcombsus
Come one, come all! Performers, family, friends, and fans. 2Nite @ 8pm EST until midnight @ Kavarna in the Oakhurst Square area of Decatur, GA and on StillStream.com, the City Skies Electronic Music Events Holiday Party celebrating the The Best Of City Skies. Socialize and listen
2010-11-24 by Backspin Promotions
Hard to part with it but I am considering selling my P3 It's in excellent condition - never been out of a smoke free zone. The screen went - common issue with P3s I guess - and I have the full replacement kit for it just not installed yet (and won't be) Anyone on list interested
2010-11-24 by von.haulshoven
ah no more mystery! cool solution. (no I don`t work for novell) --- In analogue-sequencer@yahoogroups.com, Rory wrote: > > That's right... > > http://www.youtube.com/watch?v=JJSQLWva2JY > > On Wed, Nov 24, 2010 at 9:44 AM, John L Rice wrote: > > > > > > > Hi, > > > > I may be wro
2010-11-24 by Rory
That's right... http://www.youtube.com/watch?v=JJSQLWva2JY On Wed, Nov 24, 2010 at 9:44 AM, John L Rice wrote: > > > Hi, > > I may be wrong but I thought it is designed so that the connector panel can > be repositioned by the owner to which ever area is preferred! J > > John L Ri
2010-11-24 by John L Rice
Hi, I may be wrong but I thought it is designed so that the connector panel can be repositioned by the owner to which ever area is preferred! J John L Rice From: analogue-sequencer@yahoogroups.com [mailto:analogue-sequencer@yahoogroups.com] On Behalf Of von.haulshoven Sent: Wedne
2010-11-24 by von.haulshoven
will there be 2 different kind of models of the circklon?, one with the connectors on the back and one with the connectors on the upper site. or do I see this wrong?
2010-11-19 by Paul Nagle
On 19/11/2010 17:00, yvesjates05 wrote: > Oh dear! You are right!! > Sorry for bothering, stupid me. No bother at all, enjoy. :) I think the idea was that putting the mixer on the right hand side left those above the tracks free for aux event-type stuff. -- Paul --- http://www.so
2010-11-19 by Paul Nagle
On 19/11/2010 16:29, yvesjates05 wrote: > > Hi again > > I checked and apparently P3 is not sending Midi data from these knobs. > Mixer mode is of course set to "on" and it's sending also Midi notes etc. Which knobs are you turning? Just a thought but the mixer knobs are those ab
2010-11-19 by yvesjates05
Oh dear! You are right!! Sorry for bothering, stupid me. Thank you. The volume knobs are working fine now for the synth tracks but not yet for the drum machine. The pan knobs are not working for both. Best. ¥ --- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: > > On 19/
2010-11-19 by yvesjates05
Hi again I checked and apparently P3 is not sending Midi data from these knobs. Mixer mode is of course set to "on" and it's sending also Midi notes etc. Can it be that it has something to do with the Aux? As I've read that some Aux can also be manipulated by these knobs in play
2010-11-19 by yvesjates05
Hi Colin Thank you. I'm only in play mode. The upper knobs when moved shows -> "Kn 1-16U: current value_0-127" The note knobs when moved shows -> "Kn 1-16L: current value_0-127" Sometimes both show the "stored value" wrote: > > > > I'm quiet new to the P3 and have a question. > >
2010-11-19 by Colin Fraser
> I'm quiet new to the P3 and have a question. > I set up the mixer function in the user config but it doesn't > work in my set up. Is there something I'm missing in the > configuration? The knobs work in a pass-thru mode - you have to pass the stored value before it becomes live
2010-11-18 by yvesjates05
Hello I'm quiet new to the P3 and have a question. I set up the mixer function in the user config but it doesn't work in my set up. Is there something I'm missing in the configuration? Any help would be appreciated. Thanks in advanced. Yves
2010-11-10 by Bouncer
Hi thanks Colin with P3 labelled works fine now Best regards --- In analogue-sequencer@yahoogroups.com, "Bouncer" wrote: > > > Hi i use P3 tools2 ,my fireface is in the menu..i will try with a label "P3" thanks >
2010-11-10 by Bouncer
Hi i use P3 tools2 ,my fireface is in the menu..i will try with a label "P3" thanks
2010-11-09 by Colin f
> Hi, i can send sysex from my p3 to midi ox as a sysex file > and load it in p3 tools but impossible to configure ( i see > in the configure option my fireface and selected it)p3 tools > to send and receive with my p3 how configure the midi ports > in p3 tools Is it P3 Tools, or
2010-11-09 by Bouncer
Hi, i can send sysex from my p3 to midi ox as a sysex file and load it in p3 tools but impossible to configure ( i see in the configure option my fireface and selected it)p3 tools to send and receive with my p3 how configure the midi ports in p3 tools Best regards
2010-11-06 by zahir_manek@yahoo.com
Hi Colin, Will the cirklon do midi thru to the add-on cv gate outs? So I can use it as a midi cv converter as well as a sequencer? I'm thinking I can sync the cirklon to my notron and have the midi output of the notron go through the cirklon cv gates to an sh-5 or whatever. Thank
2010-10-24 by Paul Nagle
On 24/10/2010 20:34, Josh wrote: > What's that coughing all about? > (you may as well just blow the smoke in front of the camera ;) Came back from Berlin with what now appears to be a common cough. Well lordy. :) Just doing another vid. This time showing a bit of editing. Let's h
2010-10-24 by Josh
What's that coughing all about? (you may as well just blow the smoke in front of the camera ;) On Sun, Oct 24, 2010 at 1:11 PM, Ditton33 wrote: > > > Fantastic effort Paul! Really enjoyed that. > > > >-----Original Message----- > > >From: analogue-sequencer@yahoogroups.com > > >[
2010-10-24 by Ditton33
Fantastic effort Paul! Really enjoyed that. > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequencer@yahoogroups.com] On Behalf Of Paul Nagle > >Sent: 24 October 2010 14:13 > >To: analogue-sequencer@yahoogroups.com > >Subject: Re: [a
2010-10-24 by Paul Nagle
On 24/10/2010 02:32, srmaietta wrote: > So Cirklon is out there madly sequencing away and no one has posted any review yet? Not even "Damn this is the shit!" or anything!! > > shame shame guys!!! > please we're dying for something! It probably ain't worth me posting anything cos
2010-10-24 by Colin Fraser
> So Cirklon is out there madly sequencing away and no one has > posted any review yet? Not even "Damn this is the shit!" or > anything!! > > shame shame guys!!! > please we're dying for something! The first Cirklon users are friends of mine, or long-time P3 owners who've had a c
2010-10-23 by srmaietta
So Cirklon is out there madly sequencing away and no one has posted any review yet? Not even "Damn this is the shit!" or anything!! shame shame guys!!! please we're dying for something! ~steve