Yahoo Groups archive
Messages
Page 13 of 168 · 8362 messages matched
2010-09-06 by Colin Fraser
> Does anyone the best procedure to do the mem-x upgrade and > yet keep the old sequences I have in the P3 unit? Do I have > to do a P3 dump to my computer, do the upgrade, then restore > back to the P3? Is there another way? If you are using v3, I *think* you can take a dump of
2010-09-06 by Bob S.
Forgot that aspect....I am on OS v3.1.006. OK, so do I upgrade the OS first? Bob ----- Original Message ----- From: duncan To: analogue-sequencer@yahoogroups.com Sent: Monday, September 06, 2010 03:57 Subject: [analogue-sequencer] Re: Mem-x Upgrade and formerly stored P3 sequence
2010-09-06 by Sound Engineer
Hi Colin & all on the group. As more & more varied suggestions come in i think this one from Steve would be a great way to go- I.E. all 24 analog connections user assignable in software, if possible. That way you could please everyone it seems... Perhaps you could easily switched
2010-09-06 by duncan
bob- depends if you are already using v4, in which case I think the answer is to use the sys-ex route. I'm not sure if the p3 tools app works with v4.... d. --- In analogue-sequencer@yahoogroups.com, "bob_at_work_2000" wrote: > > Does anyone the best procedure to do the mem-x upg
2010-09-05 by bob_at_work_2000
Does anyone the best procedure to do the mem-x upgrade and yet keep the old sequences I have in the P3 unit? Do I have to do a P3 dump to my computer, do the upgrade, then restore back to the P3? Is there another way? Thanks Bob El Segundo,CA
2010-09-03 by Steve Maietta
Colin, I think the best solution would be allowing the 24 analog connections to be user configurable in software. In/Out/Gate/CV/Clock/LFO/etc.. Of course this would be best, how feasible it is is another story.. On another note, when you lay out the demux board, make sure they'r
2010-09-02 by James R. Coplin
Since we are talking features on the CV side, one thing that would be great to implement on the CV outs would be LFOs that were free running, tempo synced, or re-triggerable by a note event. James R. Coplin From: analogue-sequencer@yahoogroups.com [mailto:analogue-sequencer@yahoo
2010-09-02 by John L Rice
Hi all, I'm new here! ;-) I'd say maybe something like the following would be sweet: 5 CV out 5 gate out 3 clock out with selectable division 3 start out 3 stop/reset out 1 CV in 1 gate in 1 clock in 1 start in 1 assignable in John L Rice [Non-text portions of this message have b
2010-09-02 by Richard Scott
On 9/2/10 1:30 AM, Colin Fraser wrote: > it could be used to capture sequences from external devices. > Routed to internal track control parameters, it might modulate > note/velocity/length/delay offset or scaling, pattern settings like > direction and tbase, or the equivalent of
2010-09-02 by Colin Fraser
> at this point I think we need more information from Colin > about what kinds of voltages could actually be output and > input and especially how the inputs could be used within the cirklon Obviously with the CV capability still not finalised, the software support is not final e
2010-09-01 by Colin Fraser
> Don't stick us with MIDI timing, I urge you! MIDI does have inherent latency, but that's usually over-shadowed by the poor timing performance of PCs. You'd think with multi-core processors running at a few gigahertz each, they'd be pretty hot at real-time performance. But you'l
2010-09-01 by Paolo
On Wed, 1 Sep 2010, srmaietta wrote: > ""10 cv out, 10 gate out, 2 assignable ins, 1 clock in, 1 reset in."" (3 people voted for this) I'd vote for that, too. But also for having, as additional option, a breakout box [also DIY is fine] with more outs, half CV half gates [and some
2010-09-01 by Richard Scott
at this point I think we need more information from Colin about what kinds of voltages could actually be output and input and especially how the inputs could be used within the cirklon richard On 9/2/10 12:23 AM, Miguel Mendoza wrote: > > > As far as I remember a conversation wit
2010-09-01 by Miguel Mendoza
As far as I remember a conversation with Collin the CV Outputs are quantized, so let's not expect kind of LFOs or similar. From: srmaietta Sent: Thursday, September 02, 2010 12:36 AM To: analogue-sequencer@yahoogroups.com Subject: [analogue-sequencer] Cirklon CV ins/outs.. Hey Co
2010-09-01 by srmaietta
Hey Colin and list.. I asked on the Muffiwggler forum, which is the highest concentration of analog modular users anywhere and got a few opinions regarding what Cirklon should have, cv-wise.. I got some good thoughts and opinions, so here are the replies: ""I like the way the AUX
2010-09-01 by chrispoops
Doh, so, my second post will hit some points I forgot in the first one! >_ wrote: > > Hi Colin, > > Sorry that this is my first post. I joined to learn more about the P3, but when I found out about the Sequentix I decided to hold out until it's released. > > I don't want to get i
2010-09-01 by chrispoops
Hi Colin, Sorry that this is my first post. I joined to learn more about the P3, but when I found out about the Sequentix I decided to hold out until it's released. I don't want to get into MIDI's past, but at this point, we can certainly see that its future is limited. Of course
2010-08-31 by julianfincham
I feel that CV inputs would give the machine a very significant edge in some studios.... Julian
2010-08-31 by companyofquail@gmail.com
I was under the assumption din sync would still be present and the time divisions would be extra. If I am wrong then we should just keep the din sync Sent on the Sprint® Now Network from my BlackBerry® -----Original Message----- From: "Tom Adam" Sender: analogue-sequencer@yahoogr
2010-08-31 by Tom Adam
OK, that will do the trick for me as I don't use the din sync right now. But what about people that use the din sync? And actually, I could use a start/stop output also ;-) Currently I have an arduino set up to convert a midi clk to pulse. It also generates a start/stop signal. I
2010-08-31 by James R. Coplin
Or how about just use a pattern and the gate outs to drive sequencer instead of coding a solution... James R. Coplin > -----Original Message----- > From: analogue-sequencer@yahoogroups.com [mailto:analogue- > sequencer@yahoogroups.com] On Behalf Of companyofquail@gmail.com > Sent
2010-08-31 by companyofquail@gmail.com
Maybe do one line at full, the second at half and the third at one quarter? Sent on the Sprint� Now Network from my BlackBerry� -----Original Message----- From: "Colin Fraser" Sender: analogue-sequencer@yahoogroups.com Date: Tue, 31 Aug 2010 20:39:01 To: Reply-To: analogue-sequen
2010-08-31 by Colin Fraser
> And a couple of clock CV's to drive my analog sequencers. There are three lines on the DIN SYNC socket that could be configurable as different clock divide ratios, rather than being hard-coded to DIN RUN/CONTINUE/CLOCK. Best regards, Colin Fraser Sequentix Music Systems Ltd htt
2010-08-31 by Tom Adam
I would love some inputs too. And a couple of clock CV's to drive my analog sequencers. Cheers, -- ToAd On Aug 31, 2010 07:36 "Richard Scott" wrote: > > > I very much agree with Rory. The whole point of having CV is to work > with analogue. A sequencer in a analaogue modular syst
2010-08-31 by Paolo
I, as modular synths user, think that yes, it would be nice to have also some CV inputs.. But I'd choose to have as many possible outs. In the 24 signals case, for me its ok to have 12 CVs and 12 gates, because I'm planning to use the Cirklon to drive both synths and analog-trigg
2010-08-31 by companyofquail@gmail.com
I would also like analog inputs if its a possibility. Sent on the Sprint® Now Network from my BlackBerry®
2010-08-31 by Bob S.
I'm with Martin. I have 44 synths including a couple of newer analogs and none have CV/Gate inputs or outputs except one mono one (FutureRetro Revolution) so I really have no use for them.....everything is via MIDI. So, since you are asking, I would like to see a little external
2010-08-31 by Ancient Eyeball Recipe
another vote for some analog inputs. > I very much agree with Rory. The whole point of having CV is to work > with analogue. A sequencer in a analaogue modular system is potentially > not just a controller or computer substitute but an intergrated part of > the system. I need to
2010-08-31 by Martin Naef
On 31.08.2010 00:56, Colin Fraser wrote: > If you had 24 pins on a connector free for signals (one has to be ground), > how would you divide them up ? I will use neither CV input nor outputs in any great number. However, I think a pedal input would be useful. In my sequences, I l
2010-08-31 by Richard Scott
I very much agree with Rory. The whole point of having CV is to work with analogue. A sequencer in a analaogue modular system is potentially not just a controller or computer substitute but an intergrated part of the system. I need to be able to modulate the digital cirklon from
2010-08-31 by James R. Coplin
My Peavey PC-1600x had a CV to MIDI input and honestly, I've used it maybe twice. It is so much easier and useful to sync things going the other way that I also vote 16 CV out and 8 gates out. James R. Coplin > -----Original Message----- > From: analogue-sequencer@yahoogroups.com
2010-08-31 by cramseur2000
8 cv = pitch + 8 cv = velocity 8 gates That's what I'd like. --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > Folks, > > A quick poll... > > If you had 24 pins on a connector free for signals (one has to be ground), > how would you divide them up ? > It could
2010-08-31 by Rory
Hmm, my first reaction was to go agree with 16 CV and 8 gates, but actually having CV inputs sounds like a lot of fun. For those of us with modular or semi-modular synths the Cirklon could become part of the system, with two communication going on. I am imagining here that one co
2010-08-30 by Keith Sterling
I had horrendous crosstalk from running 24 signals + 1 ground on a DB-25/ribbon cable once, but as long as there's no crosstalk, 16 cv + 8 gates would be great over here. --- On Mon, 8/30/10, Colin Fraser wrote: From: Colin Fraser Subject: [analogue-sequencer] How to use 25 pins
2010-08-30 by Miguel Mendoza
I second 16 + 8. It can be interesting to have any cv + gate input but I don't see myself using them very much. From: Colin Fraser Sent: Tuesday, August 31, 2010 12:56 AM To: analogue-sequencer@yahoogroups.com Subject: [analogue-sequencer] How to use 25 pins ? Folks, A quick poll
2010-08-30 by zahir_manek@yahoo.com
16 cvs and 8 gates. Sent wirelessly from my BlackBerry device on the Bell network. Envoy� sans fil par mon terminal mobile BlackBerry sur le r'seau de Bell. -----Original Message----- From: "Colin Fraser" Sender: analogue-sequencer@yahoogroups.com Date: Mon, 30 Aug 2010 23:56:29
2010-08-30 by Vco3
16 cv and 8 gate outs would be good. 8 of those cvs for note pitch and the other 8 for a velocity row and the 8 gates to trigger envelopes.. cya analog-jeff -----Original Message----- From: Colin Fraser To: analogue-sequencer@yahoogroups.com Sent: Mon, Aug 30, 2010 6:56 pm Subjec
2010-08-30 by Colin Fraser
Folks, A quick poll... If you had 24 pins on a connector free for signals (one has to be ground), how would you divide them up ? It could be, for example: - 16 CVs, 8 gates - 12 CVs, 12 gates - 8 CV and 4 gate outs, 8 CV and 4 gate ins etc. I'm leaning towards not having any gate
2010-08-30 by Colin Fraser
> As a previous owner of a P3, can you exactly say what the > proper price is for the Cirklon. I know you said under a > £1000 for it, but i would like to know how much it's really > going cost before i commit my order and my cash, but it does > look great though, a remarkable jo
2010-08-30 by Ditton33
Have we a firmer price vs "sub 1000 GBP" yet? :) > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequencer@yahoogroups.com] On Behalf Of Colin Fraser > >Sent: 30 August 2010 11:39 > >To: analogue-sequencer@yahoogroups.com > >Subject:
2010-08-30 by Colin Fraser
> IS the CV/Gate going to be a standard item or is it going > to be an optional add-on? > > Is CV/Gate going to be available right from the start, or at > a later time? The CV/gate interfacing has been one of the prime sources of scope-creep that have prolonged Cirklon's developm
2010-08-30 by analog1k
Hi Colin, As a previous owner of a P3, can you exactly say what the proper price is for the Cirklon. I know you said under a £1000 for it, but i would like to know how much it's really going cost before i commit my order and my cash, but it does look great though, a remarkable jo
2010-08-30 by cramseur2000
IS the CV/Gate going to be a standard item or is it going to be an optional add-on? Is CV/Gate going to be available right from the start, or at a later time? Thanks! Craig
2010-08-30 by Bob S.
OK...I'll ditch it.... Figured at least one list is better than none but since you can create one at your web site....there it is.... Bob El Segundo, CA -----Original Message----- From: Colin Fraser Sent: Aug 30, 2010 3:38 AM To: analogue-sequencer@yahoogroups.com Subject: RE: [a
2010-08-30 by Colin Fraser
Hi Bob, I appreciate the effort, but having a pre-order database on Yahoo would force people to sign-up for a Yahoo account in order to register. Many people don't want to join Yahoo, for fear of spam etc., and keeping a separate list for those people would make the whole process
2010-08-30 by Bob S.
Colin, let me help you out here..... I have just created list that can be filled out in the group database area located here: http://launch.groups.yahoo.com/group/analogue-sequencer/database Anyone who wants to pre-order, select the database, click add new record and fill in the
2010-08-30 by Colin Fraser
> Didn't see this mentioned, but is the pre-order only for UK > buyers? I bought my P3 from a place here in the U.S.A., so I > just wondered if the Cirklon is ready for the international > market or if it's just local for now. You can pre-order for any location. However I realise
2010-08-30 by timetrippad
Didn't see this mentioned, but is the pre-order only for UK buyers? I bought my P3 from a place here in the U.S.A., so I just wondered if the Cirklon is ready for the international market or if it's just local for now.
2010-08-29 by srmaietta
I know everyone's saying white, white white, but I vote for bright orange.. Or neon yellow. the funkier, the better : ) maybe take a tally and us in the preorder group can get the one we'd like.. probably too much of a pain, but hey, commemorate the first run with something speci
2010-08-29 by jacknabbits
Hi, I posted this earlier, the mem x is still available should anyone require one. Please mail me if interested. Thanks.