Re: [analogue_systems] Re: recording tracks
2003-05-19 by Arnauld Michelizza
Thank you very much for your usefull and very interesting answer ! :-)) Arnauld
Messages
Browse messages
Page 26 of 29 · 1446 messages matched
Re: rs230 buffer/inverter
2003-05-19 by adamburr1973
yes, that helps a lot. i have a very small system so if i get this i need to be able to use it as an audio splitter as well if necessary. i have the rs70 now but i find that the inverter acts as a lpf even with the slew turned all the way down and i wanted to make sure that the r
Re: recording tracks
2003-05-19 by (i think you can figure that out)
Arnauld- Thanks for the kind words on Electrolux. It was much work , but a lot of fun. My platform is Digital Performer. I chose this because at the time I was shopping around and asking people about this, everybody opened with "Well, if you can't afford Digital Performer, then..
Re: [analogue_systems] recording tracks
2003-05-19 by Bakis Sirros
hi arnauld, where did you find and download that piece?i would like to hear it,too.... bakis. --- Arnauld Michelizza wrote: > > Hi Peter, > > I have just heard "ElectroLux" and I like it. It's a > great piece ! > As a beginner in making electronic music, I was just > wondering ho
recording tracks
2003-05-19 by Arnauld Michelizza
Hi Peter, I have just heard "ElectroLux" and I like it. It's a great piece ! As a beginner in making electronic music, I was just wondering how you recorded and mixed that track ? For information, my own way of making music is : 1. recording layers (synth sounds + effetcs) with p
Re: recording tracks
2003-05-19 by selfoscillate
take a look here: http://www.buzzclick-music.com/music.html best wishes self oscillate --- In analogue_systems@yahoogroups.com, Bakis Sirros wrote: > hi arnauld, > where did you find and download that piece?i would > like to hear it,too.... > bakis. > > > > --- Arnauld Michelizza
Re: rs230 buffer/inverter
2003-05-18 by piperplaysynth
Hi Adam, I ran a quick audio test for you as I have two of these. There were no problems with the sound quality of a sawtooth wave as I swept it up to the limit of my hearing range through the buffer/inverter module. I tried the same with the inv output and - no problem. An A-B c
Re: rs230 buffer/inverter
2003-05-17 by (i think you can figure that out)
--- In analogue_systems@yahoogroups.com, Arnauld Michelizza wrote: > On Fri, 16 May 2003, adamburr1973 wrote: > > > can anyone tell me, will the rs230 pass audio signals? or is it for > > cvs only? > It all depends on the module. Some can handle DC or AC without any weirdness. Th
Re: [analogue_systems] rs230 buffer/inverter
2003-05-16 by Arnauld Michelizza
On Fri, 16 May 2003, adamburr1973 wrote: > can anyone tell me, will the rs230 pass audio signals? or is it for > cvs only? You can use both. What is cool with patchable analogue synth is that there is no difference between a cvs and an audio signal : both are signals ! Arnauld
rs230 buffer/inverter
2003-05-16 by adamburr1973
can anyone tell me, will the rs230 pass audio signals? or is it for cvs only? thanks, adam
Re: Analogue Systems DCO is coming...
2003-05-12 by selfoscillate
hmmm sounds promising. --- In analogue_systems@yahoogroups.com, Bakis Sirros wrote: > hi peter, > yes,end it will include a midi to cv interface and an > arpegiattor.it will be an additive engine basically!!! > bob told me to be prepared to want one!:-) > it will be combined with
Re: [analogue_systems] Analogue Systems DCO is coming...
2003-05-10 by Bakis Sirros
hi peter, yes,end it will include a midi to cv interface and an arpegiattor.it will be an additive engine basically!!! bob told me to be prepared to want one!:-) it will be combined with an expander module to add even more features.the single voice module together with it's expan
Analogue Systems DCO is coming...
2003-05-10 by (i think you can figure that out)
Newsbyte: I have heard that Analogue System is working on a 6 voice polyphonic, DSP based VCO - a DCO in effect. You plug a midi keyboard into it, put down 6 fingers, you hear those 6 pitches - all from one oscillator. Multi waveforms, full analog VC control of pitch and about a
Re: [analogue_systems] rs390
2003-04-29 by Peter Grenader
If I am not mistaken, the 390 has the same DSP engine as the 290, without the ability to sample or really break into the digital feature set like you can with its big brother. It sounds great! Peter selfoscillatewrote: hello, anybody here using a rs390 echo module? i wonder how i
rs390
2003-04-29 by selfoscillate
hello, anybody here using a rs390 echo module? i wonder how it sounds. best wishes self oscillate
Re: difference between comb filter and roland analogue chorus???
2003-04-29 by selfoscillate
good decision. you won't regret it. best wishes self oscillate --- In analogue_systems@yahoogroups.com, Bakis Sirros wrote: > thanks selfosc, > that's what i was expecting to find out! > so,now i know that i'll need the reverb/chorus module > in my next integrator order! > bakis.
Re: [analogue_systems] Re: difference between comb filter and roland analogue chorus???
2003-04-28 by Bakis Sirros
thanks selfosc, that's what i was expecting to find out! so,now i know that i'll need the reverb/chorus module in my next integrator order! bakis. --- selfoscillate wrote: > > hello bakis, > > the rs120 comb filter is a "normal" bbd device. > (bbd = bucket brigade delay = analogu
Re: difference between comb filter and roland analogue chorus???
2003-04-28 by selfoscillate
hello bakis, the rs120 comb filter is a "normal" bbd device. (bbd = bucket brigade delay = analogue delayline) the juno-chorus is more like the rs310 reverb/chorus module, these use another type of bbd. this bbd generates six unrelated taps instead of one. thats why the juno-chor
Re: difference between comb filter and roland analogue chorus???
2003-04-27 by piperplaysynth
Hi Bakis I used to own a Juno 6 many years ago. The chorus on it was stereo and had 2 fixed settings. I too, thought it was very warm and nice. I have suggested a stereo patch (below) which should generate some very good chorus effects and a whole lot more using the A.S. comb fil
Re: difference between comb filter and roland analogue chorus???
2003-04-27 by synth_freak_2000
hi arnauld, thanks for uploading the clip but i don't have winamp installed,so i can't listen to it...maybe if you can make it a mp3...? but,please,don't get in trouble i'll buy one,anyway...:-) bakis. --- In analogue_systems@yahoogroups.com, Arnauld Michelizza wrote: > > > hi li
Re: [analogue_systems] difference between comb filter and roland analogue chorus???
2003-04-24 by Arnauld Michelizza
> hi list, > does anyone knows what is the difference(technical and > in terms of sound)between the AS comb filter module I do not know the difference but I made a short demo you can find in "Files/sound" folder. Arnauld
difference between comb filter and roland analogue chorus???
2003-04-24 by Bakis Sirros
hi list, does anyone knows what is the difference(technical and in terms of sound)between the AS comb filter module and the classic warm sounding roland analogue chorus found in keyboards like juno60,jx8p and rs09??? i'm interested to know because i like a lot the warm roland cho
Another message from Bob William
2003-04-24 by Arnauld Michelizza
Bob said : "It seems that our manual and the p.d.f on the website has not been updated and is still showing the old 500ma figure. Could you post to the user group that for quite some time now our power supply can handle 800ma with ease and that the manual and website will be chan
RS 500 510:Power supplies:Bob Williams
2003-04-23 by piperplaysynth
I thought I would throw a couple of of comments into the ring to add to the current postings. Firstly... the RS500E filter. I have not played around much with this yet, but I am glad I have one. This is not an A.S. design but a copy of the old EMS filter made under licence (as is
Re: RS290 answer by Bob William
2003-04-23 by (i think you can figure that out)
The A Sysy power supply uses regulators which are rated as follows: 5 volt line: 7805 rated at 1 amp +12 volt line: LM317 rated at 1.5 amps -12 volt line: LM337 rated at 1. 5 amps Your mileage may vary - but it looks to be good for more than half an amp. This is not to say that I
Re: [analogue_systems] RS290 answer by Bob William
2003-04-23 by Bakis Sirros
hi list, yes,but ,doesn't analogue systems own case(rs15) has a PSU that can handle only 500mA???so,if someone want to add an rs290 into this rs15,what can he do??add a second PSU?can this be done by AS?? bakis. --- Arnauld Michelizza wrote: > > I have forwarded your bug reports
RS290 answer by Bob William
2003-04-23 by Arnauld Michelizza
I have forwarded your bug reports about rs290 module to Bob William. Here is his answer : We have learnt that the faults are to do with power supply issues due to our modules being fitted into inferior cases from other manufacturers. It seems the +12v and +5v rails are being affe
Re: RS500E and RS510E
2003-04-22 by selfoscillate
hello, the rs510e is a wonderful module. it does it all, envelope, lfo, cv-source, vca. it is one of the modules i use all the time since i got it. the rs500e is not my favorite filter. it sounds ok, but it is no "must have". i would describe it as a bit "thin". best wishes self
Re: RS290 Issues.
2003-04-22 by ethanzer0
--- In analogue_systems@yahoogroups.com, > in the meanwhile, we have a great instrument > to enjoy - the 290 is a lot of fun. Fortunately, > none of these bugs make this module unusable in > the meantime Peter, I agree with you that the RS290 is an amazing achievement and a worth
RS290 Issues.
2003-04-21 by (i think you can figure that out)
Regarding the anomalies with the RS290: The 290 is somewhat groundbreaking in that it's the first time (to my knowledge) a DSP-based device has made it to the analog domain, complete with analog VC. Undoubtedly, something like this may have some bugs at the onset. Afterall, it's
Re: [analogue_systems] Modding the RS200
2003-04-21 by keithw@cix.compulink.co.uk
In-Reply-To: HI, > I have seen your website : what an amazing collection of synth ! > The cabinet for your RS is very nice. But what are those strange black > modules ? I assume you mean the 3.5mm socket modules? Its mainly EFM synth modules done in AS layout with moogish knobs a
Re: [analogue_systems] Re: Modding the RS200
2003-04-21 by keithw@cix.compulink.co.uk
In-Reply-To: Thanks for the help Peter, much appreciated, I may try adding banks, I am not sure yet it was just a muse. I have two other sequencers to build first. :o) cheers Keith http://home.freeuk.net/lowpass
Re: [analogue_systems] Re: RS290 Question
2003-04-21 by Arnauld Michelizza
> Are you saying 44.1k at 4 bits does not > produce the typcial speak-and-spell > aliased sample sound? Yes, aliasing is related to frequency. Sampling theorem states that sampling rate must be twice as the higher frequency of the sound you want to reproduce. If the sampling rate
Re: [analogue_systems] RS290 Question
2003-04-21 by Arnauld Michelizza
> I just received my RS290 this weekend > and I am wondering if there is something > wrong with mine, or, if software version > v1.0 is buggy. > > I noticed the following: > > * The maximum sampling rate is 46.9k > not 48k. > > * With the feedback turned up in delay > mode I get
Re: [analogue_systems] RS290 Question
2003-04-21 by Peter Grenader
Gareth Greenwrote: im not an owner of an RS290 so cant answer your questions. Other than point out that aliasing noise is not a by product of low bit depths . Aliasing is a by product of low sample rates. sorry to act like teacher but that is my job ;) regards ----- Original Mess
Re: [analogue_systems] RS290 Question
2003-04-21 by Gareth Green
im not an owner of an RS290 so cant answer your questions. Other than point out that aliasing noise is not a by product of low bit depths . Aliasing is a by product of low sample rates. sorry to act like teacher but that is my job ;) regards ----- Original Message ----- From: eth
Re: RS290 Question
2003-04-21 by ethanzer0
--- In analogue_systems@yahoogroups.com, "Gareth Green" > sorry to act like teacher but that is my job ;) > > regards > Are you saying 44.1k at 4 bits does not produce the typcial speak-and-spell aliased sample sound? Ethan
RS290 Question
2003-04-21 by ethanzer0
I just received my RS290 this weekend and I am wondering if there is something wrong with mine, or, if software version v1.0 is buggy. I noticed the following: * The maximum sampling rate is 46.9k not 48k. * With the feedback turned up in delay mode I get high frequency aliasing
Re: [analogue_systems] Modding the RS200
2003-04-18 by Arnauld Michelizza
On Fri, 18 Apr 2003 keithw@cix.compulink.co.uk wrote: > I am just in the garden on a glorious day building a cabinet for my > RS 200 sequencer. I have just been snooping round the back > and at first sight it looks like I can add extra channels with or > without slew quite easily
Modding the RS200
2003-04-18 by keithw@cix.compulink.co.uk
Hi All, I am just in the garden on a glorious day building a cabinet for my RS 200 sequencer. I have just been snooping round the back and at first sight it looks like I can add extra channels with or without slew quite easily to it just by connecting more knob boards to the data
Re: Modding the RS200
2003-04-18 by (i think you can figure that out)
in regard to adding banks to sequencers: You can do this, given the drive method that supplies the pots (the outputs of the final counter which is being gated by the banks) isn't near it's maximum load. The pots and pulse banks themselves aren't so much the culprit - it's the pul
Re: RS500E and RS510E
2003-04-17 by Robair, Gino
It was asked: getting some reviews before buying.>> > I was lucky enough to spend an evening with both modules last week, as well as the 390 Echo, 400 Phase Shifter, 95 High End VCO, and 120 Comb Filter. I was especially pleased with the Trapezoid module, because it has the flavo
Re: [analogue_systems] RS500E and RS510E
2003-04-17 by Arnauld Michelizza
> RS500E and RS510E > > has anyone tried these? > > They really intrigue me and I wouldn't mind hearing them or > getting some reviews before buying. So do I ! If someone with enough time or enough courage (or both) can make a little demo, it would be nice :-) Arnauld
RS500E and RS510E
2003-04-16 by keithw@cix.compulink.co.uk
RS500E and RS510E Hi all has anyone tried these? They really intrigue me and I wouldn't mind hearing them or getting some reviews before buying. I have diode ladder filters and a lack of cash so I am not sure whether to dive in or not. cheers... Keith http://home.freeuk.net/lowpa
rs120 sample
2003-04-15 by Arnauld Michelizza
I just uploaded a sample that permit to listen rs120 / comb filter in action. That's a very basic patch indeed. You can find the sound file in the "File/Sound" folder. Arnauld Note : if you want to know why I prefer Ogg, you can have a look at http://www.vorbis.com/).
Re message from Bob Williams
2003-04-15 by piperplaysynth
Thanks for the mention Bob. I will soon be placing the other two tracks on my site in MP3 format. The above tracks will be - Andante Largo. A very old piece of music which I have taken some licence with. It features the sound of a pipe organ, trumpet and choir - all on the 8500.
Re: [analogue_systems] Ok, there is an AS Group.......
2003-04-15 by Gareth Green
Whoa Doooood! what an amazing track , amazing production , but those drums bit GM sounding ;) hehehehe ----- Original Message ----- From: ekchuana To: analogue_systems@yahoogroups.com Sent: Tuesday, April 15, 2003 3:33 PM Subject: [analogue_systems] Ok, there is an AS Group......
Re: [analogue_systems] Ok, there is an AS Group.......
2003-04-15 by Arnauld Michelizza
> www.synaethesia.com/cakehole.mp3 - spot the RS \m/ Great song ! I like a lot how it sounds. Can you give us more details about how you did it ? Which gear, which sequencer, etc. ? Arnauld
Re: Ok, there is an AS Group.......
2003-04-15 by ethanzer0
--- In analogue_systems@yahoogroups.com, "ekchuana" > www.synaethesia.com/cakehole.mp3 - spot the RS \m/ BTW, nice track! Ethan
Re: Ok, there is an AS Group.......
2003-04-15 by ethanzer0
--- In analogue_systems@yahoogroups.com, "ekchuana" > > Does anyone have the Sampler/delay mod? I want it! Please let me > know if you rate it.. I just purchased the RS290/295. It should be here by this coming weekend. I'll make sure to post clips and pictures as soon as it arriv