Re: [bc2000] Re: Partial success, but partial fail (BCR2000/MKS50)
2016-10-14 by medio
Not sure if you have tried this but the learn function is looking for the value range, you need to go from value 0 to 127 or whatever it is, it might take a
Messages
Browse messages
Page 6 of 110 · 5497 messages matched
Re: Partial success, but partial fail (BCR2000/MKS50)
2016-10-14 by data_error23@...
I tried a couple of things today: BCR connected directly to MKS (in/outs of both). Nothing seems to register on BCR when trying to learn from the MKS. Tried
Re: [bc2000] Partial success, but partial fail (BCR2000/MKS50)
2016-10-13 by data_error23@...
The patch bay is a DMC (now Voodoo Labs) MX-8. I will do mode testing when I have chance later today.
Re: Partial success, but partial fail (BCR2000/MKS50)
2016-10-13 by caverhill2004@...
Yup, that was me asking. He s got it going way I want! Hope I get there. I will check MIDIOX tomorrow. Thanks.
Re: Partial success, but partial fail (BCR2000/MKS50)
2016-10-13 by caverhill2004@...
Hi Bruno, The MKS MIDI indicator hasn t flashed once yet from BCR. I did try connecting the BCR out direct to the MKS and still nothing.
Re: [bc2000] Partial success, but partial fail (BCR2000/MKS50)
2016-10-13 by Bruno
What kind of MIDI patchbay are you using? If the MKS MIDI indicator flashes, when you tweak BCR knobs, but there s no change in sound, then most likely it
Re: [bc2000] Partial success, but partial fail (BCR2000/MKS50)
2016-10-13 by sghookings@...
Here s a link to Ctrlr and MKS50 Topic: Roland MKS-50 Advanced | Ctrlr - Control your MIDI life (MIDI editor for all your hardware)
Re: [bc2000] Partial success, but partial fail (BCR2000/MKS50)
2016-10-13 by Stephen Hookings
Use a midi interpreter like MidiOx to see what is happening. As I said I am sure I use s3 between Miniak and BCR2000 so.that messages from Miniak update BCR
Partial success, but partial fail (BCR2000/MKS50)
2016-10-13 by caverhill2004@...
It appears, using Mode S4, that I got MKS50.syx (from this group) loaded into a Preset on my BCR2000. That s great. Unforutnately no response from the MKS50. I
Re: New Noob...questions re setup and using with MKS-50 etch
2016-10-12 by caverhill2004@...
Hi Stephen, I did try S3 but it seems to have less results than S2. I can give it a shot again though. Do you know if i should be able to get BCR to learn as
Re: overlay blanks
2016-10-12 by w.james.meagher@...
Hi Daniel, I ve made BCR2000 presets for use with the Vecoven 4.X PWM Roland Super JX10/MKS70. I also designed some overlays in Photoshop for use with these
Re: overlay blanks
2016-10-12 by ad.vangerven@...
Wow, your custom zaquencer case is beautiful!
Re: overlay blanks
2016-10-12 by ad.vangerven@...
Dear Daniel, These are looking very good and professional! (So I ordered some). I m also looking forward to a pre-printed set, in my case for the zaquencer
Re: [bc2000] UPDATE: New Noob...questions re setup and using with MKS-50 etch
2016-10-12 by Stephen Hookings
Have u tried s3 which i think echoes parameters? On 12 Oct 2016 08:58, caverhill2004@yahoo.com [bc2000] wrote: I found S2 mode
UPDATE: New Noob...questions re setup and using with MKS-50 etch
2016-10-12 by caverhill2004@...
I found S2 mode gets a connecton between keyboard, BCR, and MKS via patchbay. I even got a knob to learn something (I believe it was the function in MKS that
New Noob...questions re setup and using with MKS-50 etch
2016-10-11 by caverhill2004@...
Hello. I have just gotten the BCR2000 to hopefully use with my MKS-50 as well as my soft synths, DAW, etc. I am not sure, looking at the manual, how to
Re: [bc2000] Re: overlay blanks
2016-10-09 by Scott Stanley
What I really want is that custom chassis your BCR is in! -Scott
Re: overlay blanks
2016-10-09 by danielhesse1@...
Dear all, good news: new supplier for the overlays and back to old pricing. I have built a webpage for the overlays: Products - Taktility
Re: [bc2000] Purchased Bcr2000 Zaquencer mod: opinions?
2016-09-29 by F.Manduca
Hello! No, I was wrong, it was just Mercatinomusicale. I was always happy with it, at least for the 5 6 times I dealt using it. All the best, Francesco. ...
Re: [bc2000] Purchased Bcr2000 Zaquencer mod: opinions?
2016-09-29 by Boniforti Flavio
Ciao Francesco, are you talking about mercatinomusicale.com or is there really a site strumentimusicali for buy/sell? F. https://soundcloud.com/bonnyfused
Re: [bc2000] Purchased Bcr2000 Zaquencer mod: opinions?
2016-09-28 by F.Manduca
Hello Flavio, nice to see You here. I purchased my Bcr From another italian musician, throuhg the italian Strumentimusicali buy & sell site. I asked for a
Re: [bc2000] Purchased Bcr2000 Zaquencer mod: opinions?
2016-09-28 by F.Manduca
Thanks a lot for Your kind advice, Alex. Francesco. ... Lun 26/9/16, Alex brufordrules@gmail.com [bc2000] ha scritto: Oggetto: Re:
Re: [bc2000] Purchased Bcr2000 Zaquencer mod: opinions?
2016-09-26 by Alex
The ZAQuencer developer uploads a video with the new features every time a new firmware is released. You can subscribe to ZAQ Audio YouTube s channel and see
Re: [bc2000] Purchased Bcr2000 Zaquencer mod: opinions?
2016-09-26 by Boniforti Flavio
Hi Francesco - I m italian as well and I m enjoying ZAQuencer pretty much! Where did you have the luck to get a BCR2000 with already ZAQuencer firmware
Purchased Bcr2000 Zaquencer mod: opinions?
2016-09-26 by F.Manduca
Hi there, I m a newbie product user from Italy. Never had to do with this product before, but decided to subscribe a long time ago considering it very
Re: [bc2000] Re: BCR memories
2016-09-23 by Sarmad Attar Bashi Shargool
Well, well, well... This is getting more and more interesting! Adding new dimensions to my imagined performance... I hadn t even planned on changing patches.
Re: [bc2000] Re: BCR memories
2016-09-23 by rpcfender@...
If you want to, you can have the same BC MKS-7 patch in each of the 32 locations, but with different default values for each parameter. This means you could
Re: [bc2000] Re: BCR memories
2016-09-23 by Smiley
you re going to be loving life! :D On Thu, Sep 22, 2016 at 7:40 PM, Sarmad Attar Bashi Shargool ... --
Re: [bc2000] Re: BCR memories
2016-09-22 by Sarmad Attar Bashi Shargool
Hi, Thanks Royce! I ve been trying to find this out. So it is possible to save different states on the BCR/BCF and recall them as if they are different sysex
Re: BCR memories
2016-09-22 by rpcfender@...
Yes. You can set it up in the preset so when you change to that preset the current / default values are sent to the synth. You can also send all the current BC
BCR memories
2016-09-22 by Sarmad Attar Bashi Shargool
Thanks for accepting me into the group! Before I actually buy a BCR 2000, I need to check one thing: I d be using it as a controller for my MKS 7. And I need a
Re: Behringer BCR XL Control Script
2016-09-19 by rpcfender@...
I think you will find there is a learning curve whichever way you go. SO the three options 1) Set up a CC preset (Behringer has one, but they are every where
Re: Behringer BCR XL Control Script
2016-09-18 by senang@...
Yeah, I know you can map directly and BC Manager is just a tool/interface to make mapping more easy. I also know there are some other tools but so far BC
Re: [bc2000] Re: Behringer BCR XL Control Script
2016-09-18 by Jan Vandeweyer
Are you aware that you do not need BC Manager nor other software to map third party vstis like Diva or Kontakt? You can do all that on the BCR controller
Re: Behringer BCR XL Control Script
2016-09-18 by senang
Thanks for your response! I hear what you re saying but I think (again, I m looking for info so I m not that knowledgeable about Isotonik/Sigabort) you re
Re: Behringer BCR XL Control Script
2016-09-18 by w.james.meagher@...
Disclaimer: I have firsthand experience with BCmanager, but I have only read the website info on Sigabort and PrEditor. From what I can gather they are apples
Re: Behringer BCR XL Control Script
2016-09-18 by senang@...
I realize BC Manager is awesome. I have much respect for the developer as well since he chose to make it availble for free -along with some other great tools
Re: [bc2000] Re: Behringer BCR XL Control Script
2016-09-14 by Smiley
i cannot speak on the specifics of your post but just want to chime in that BC Manager for me has been a terrific app. i like the GUI and found that i became
Re: Behringer BCR XL Control Script
2016-09-14 by senang@...
Hi, I just looked at Isotonik s website and am very impressed by what they have to offer. Still I don t quite understand the differences: You can buy PrEditor,
New file uploaded to bc2000
2016-09-10 by bc2000@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the bc2000 group. File : /Presets/Vecoven
New file uploaded to bc2000
2016-09-10 by bc2000@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the bc2000 group. File : /Presets/Vecoven
Re: Presets and Overlay template for Vecoven 4.X PWM Roland Super JXs
2016-09-10 by W. James Meagher
New set of files uploaded to group.New files fix an incorrect value for Upper Voice VCA ENV SELECT in preset 01
New kit for Jx8p
2016-09-10 by Andres Cataluña
the new kit is manufactured kiwitechnics, I contacted them and they told me to be published in October. here they have posted an advance:
Re: [bc2000] Re: New file uploaded to bc2000
2016-09-10 by w.james.meagher@...
I believe KiwiTechnics is cooking up a JX8p ROM upgrade, but it might not be on their site yet. Sent from my iPhone
Re: New file uploaded to bc2000
2016-09-10 by rpcfender@...
Thanks James. Glad to see you got it going and decided to share it. Do you know if there is there a ROM mod for the JX-8P as well. All the best Royce
New file uploaded to bc2000
2016-09-09 by bc2000@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the bc2000 group. File : /Presets/Vecoven
Presets and Overlay template for Vecoven 4.X PWM Roland Super JXs
2016-09-09 by w.james.meagher@...
For those with a JX10 or MKS70 with the Vecoven 4.X OS + PWM upgrade, I ve made a programmer for it using a Behringer BCR2000. All Tone Parameters (Upper and
Re: Newbie attempting to create Vecoven 4.X Roland JX10 preset
2016-09-05 by rpcfender@...
Hi James, if you have a PC I would download and install MidiOX. I would load the PC USB drivers. Change to mode U3 - (EDIT + STORE then twist top left encoder
Re: Newbie attempting to create Vecoven 4.X Roland JX10 preset
2016-09-05 by W. James Meagher
Thanks again for your pointers Royce. I ve been following your advice and have certainly made progress. I ve got Rainer s JX8p Preset open in BC Manager and
Re: Newbie attempting to create Vecoven 4.X Roland JX10 preset
2016-09-04 by w.james.meagher@...
Many thanks for the reply Royce! I gave the Behringer Manual a read and it actually all made sense to me so I started experimenting with the LEARN function.