Re: [disklavier] Some newbie questions...
2014-05-06 by <kassey22000@...>
I highly recommend upgrading to the DKC-850 and have done so myself on a DC5 MkIIxg Pro. It not only allows greater flexibility with music formats, but
Yahoo Groups archive
Messages
Page 52 of 274 · 13692 messages matched
2014-05-06 by <kassey22000@...>
I highly recommend upgrading to the DKC-850 and have done so myself on a DC5 MkIIxg Pro. It not only allows greater flexibility with music formats, but
2014-05-06 by Donal Galvin
The dkc 850 plays back at a lower volume from my experience. Not sure what you mean by sound quality but the midi sounds are pretty good but not much different
2014-05-06 by <larsmagnus@...>
I´ve just bought a Disklavier DC3A with the DKC55RCD control unit. 1) I´m thinking of upgrading to the new DKC850 control unit, and have read about new
2014-05-05 by Bob Gonzalez
Free floppy disks. 160 High Density 1.44 MB disks. Mostly unused. Can be used as 720 KB by covering a hole. Can be used in older controllers not accepting HD
2014-05-02 by <holkanen@...>
Hi, Could anyone here help me? I m having same problem as Peter, I think. Display in my MX100a is in japanese - has always been... I saw the instuctions Bill
2014-05-01 by Sam Kanter
Thanks! Good advice. Anyone else have anything to add re checking DKV before buying? Sam www.keyboardcollective.com (212) 684-3304 *(Sent from phone - please
2014-05-01 by James Fry
... I have the same piano. I d check that the XG tone generator works, that the silent piano generator works (should be if he s been using it for silent piano)
2014-05-01 by Skanter123
Hi all, One of my students is selling his DKV, a 2001 MPX1Z upright. I am considering buying it for my teaching studio, I have a MPX100II at home. I will go
2014-04-26 by mangez@...
Hello, I m sorry I didn t get back to you any sooner, but I had a serious problem with my computer and lost a lot of records (daily back-ups are now
2014-04-23 by <mbutterfly548@...>
HI, My Mx100II have problem in these days. It plays couple note then stops. On LCD, it shows piano power off (PWM over) . As for other function on the
2014-04-18 by mangez@...
Hello, you can call me anytime after Monday on +44 (0)7885 568846. I would charge £15.00 for a consultation, up to 15 minutes or so. I would send you a PayPal
2014-04-17 by George Frederick Litterst
Good afternoon, everyone. Sam, I don t know the answer to your question. The diagnostic/calibration programs have been different from one generation of
2014-04-17 by Sam Kanter
Hi George, I do have the service manual for my MPX100 II, so I could run calibration programs. I just would want to see if there are any issues that might need
2014-04-17 by Frederick L. Faulkner
Good point. Where can I find the specs on mechanical adjustment of the sustain pedal? Fred On Thu, Apr 17, 2014 at 9:23 AM, George Frederick Litterst
2014-04-17 by Bill Current Gmail
Sam, I agree with George. Calibration cannot overcome problems with the piano itself. In addition to that, I am always a bit reluctant to provide these manuals
2014-04-17 by George Frederick Litterst
Good morning, everyone. Sam, there are limits to what the typical customer can gain from attempting to calibrate the instrument himself. For example, if the
2014-04-17 by mangez@...
Hi, with earlier models, there used to be a service manual and a maintenance manual. The maintenance manual had the adjustment and calibration procedure, but
2014-04-16 by Skanter123
Is there a tutorial about DKV calibration on different pianos and how they might be used by the owner without a tech? Sam www.keyboardcollective.com (212)
2014-04-16 by PianoBench@...
Good morning, everyone. The built-in calibration features of the Disklavier are amazing. However, I agree with Adrian that there is no substitute for regular
2014-04-16 by mangez@...
Hi, you may also find that, on older models, the LEDs in the sensor assemblies get dimmer and cause sensing problems. On the other hand, as GFL says, pianos
2014-04-16 by George Frederick Litterst
Good morning, everyone. Kevin, Disklavier models that have hammer sensors are designed to ensure that hammer velocity on playback is correct. Over time, there
2014-04-14 by Kevin Weng
The problem is fixed. The technician did a calibration. I learned something new today. I thought the recording should be a black or white thing: either you
2014-04-14 by Richard Seldin
I have a Yamaha Grand piano which has a Diskklavier DKC 850 and Silent Contriol unit. They replaced an older version and were installed by John Miladelaroca,
2014-04-13 by Bill Current Gmail
There are no AUX Outs in a Mark IV. OMNI OUTS are not affected by Silent Mode. Only the audio Outputs are Off when in Silent Mode. Bill On Apr 13, 2014, at
2014-04-13 by Kevin Weng
I did get to the setting for OMNI OUT. But still two dependencies: 1. I don t see any AUX OUT. I check the manual there is no AUX OUT, only OMNI OUT. 2. I set
2014-04-13 by Kevin Weng
Awesome! I got it now. The line in works perfectly. My daughter can now pick a video from youtube and sing and play. Wonderful. Thanks Bill! On Sun, Apr 13,
2014-04-13 by Bill Current Gmail
OMNI Out gives you several options: - Output (giving you the same output as the Audio Outputs.) - Output plus PianoTG (Same as Output plus a Digital piano
2014-04-13 by Bill Current Gmail
Hi Kevin, Sorry for the mis-information. Highlight the OMNI IN VOLUME line, you have an outer ring that goes around the SELECT button on the PRC-100. Use the
2014-04-12 by Kevin Weng
Sorry Bill I still can t find the yes/no key. Here is picture of my prc-100. Kevin On Apr 12, 2014 1:25 PM, Bill Current Gmail
2014-04-12 by mangez@...
AUX OUT will give all the backing, minus the piano part. OMNI OUT will give you backing + (sampled) piano. Adrian Thomas Music Services On Apr 12 2014, Kevin
2014-04-12 by Bill Current Gmail
Highlight the line then use your YES/NO buttons. Bill On Apr 12, 2014, at 1:10 PM, Kevin Weng wrote: Yes I get there and indeed the
2014-04-12 by Kevin Weng
Yes I get there and indeed the audio in is set to 0. However I don t see how I can change it. I can get into the field but then? Kevin On Apr 12, 2014 10:59
2014-04-12 by Kevin Weng
Thanks that makes sense. How about the other way around: I only want to hear the acoustic part? I only want the speaker sound for the voice and other audio
2014-04-12 by mangez@...
Yous need to set the piano to Silent Mode if you don t want to hear the acoustic piano. Adrian Thomas Music Services On Apr 11 2014, Kevin Weng wrote: Yes
2014-04-12 by Bill Current Gmail
Go into Setup, then Audio I/O, (last page of User functions on the PRC-100.) Bill On Apr 12, 2014, at 10:27 AM, Kevin Weng wrote: Hi
2014-04-12 by Kevin Weng
Hi Bill, Where I can set the OMNI IN level? I look at the volume setting, I only see ... Voice TG Audio Mic Thanks, Kevin
2014-04-12 by Bill Current Gmail
Kevin, I am glad to hear that you found it! Bill On Apr 12, 2014, at 10:14 AM, Kevin Weng wrote: Yes i see the menu in silence mode
2014-04-12 by Kevin Weng
Yes i see the menu in silence mode now. Thanks Bill! Kevin On Apr 11, 2014 12:08 PM, Bill Current Gmail
2014-04-12 by PianoBench@...
Good morning, everyone. Kevin, the iOS controller for the Mark IV does not have a lot of the features of the PRC-100. Regards, PianoBench
2014-04-11 by Bill Brandom
It sounds like your OMNI IN volume is set to 00. Raise your volume level to 60 or so and see if you can hear what is being sent to the OMNI IN. Bill On Apr 11,
2014-04-11 by Bill Current Gmail
My suggestion is to have your piano calibrated. If this doesn t fix the sensing problems on those two keys, then have him check the key and hammer shutters,
2014-04-11 by Bill Current Gmail
The function is available in Silent Mode. If it was available in acoustic mode, you wouldn t hear anything. :) Bill On Apr 11, 2014, at 11:59 AM, Kevin Weng
2014-04-11 by Kevin Weng
I see from the manual that there is a way to disable the keys from moving/playing when playing back recording. However I could not find such menu on my pda
2014-04-11 by Kevin Weng
I am record ing my practice and realize there are 2 keys not being recorded: #D 1 octave up and E 2 octave down For existing recording that has these two keys
2014-04-11 by Kevin Weng
I used the ios app Disklavier controller as it is more responsive than the pocket pda. However it does not have the full features. E.g., there is no record
2014-04-11 by Kevin Weng
I am trying to setup the karaoke on the disklavier to have input accompany sound like from a youtube video. It is working but I have to use the Remote Live
2014-04-11 by Kevin Weng
Yes the omni out works like a champ! Wonderful to have added bass when playing back. Thanks Adrian Thomas Music Services! One thing I don t quite understand is
2014-04-07 by <sbassi@...>
Hi I understand you may have a 500RXG controller for sale. As I am looking for a UK power rated unit, please advise if it would be suited, and if so the
2014-04-07 by Joe Morris
FWIW, I recently purchased one of those sound bars that are for under a TV. Most of them have Bluetooth subwoofers. I purchases the Boston Acoustics sound bar
2014-04-07 by mangez@...
Oohps, pressed send too early. The OMNI OUT gives you all the backing + sampled piano, the AUX OUT gives you just the backing Adrian Thomas Music Services On