RE: [gsp-2101] Can I buy a 2101 power transformer??
2011-07-19 by M M
I l have to pull it from the rack and find that confounded little allen.. Never put off till tomorrow what you can ignore entirely. To:
Messages
Browse messages
Page 6 of 45 · 2224 messages matched
Re: [gsp-2101] Can I buy a 2101 power transformer??
2011-07-19 by krazydog
sure send me the part number & brand. thanks sean ... From: M M To: gsp-2101@yahoogroups.com Sent: Tuesday, July 19, 2011 1:33 AM Subject: RE: [gsp-2101] Can I
RE: [gsp-2101] Can I buy a 2101 power transformer??
2011-07-19 by M M
I had a power supply fail very close to a gig and had an electronics tech replace it with a non-digitech power supply. It has been working fine to this day
Re: [gsp-2101] Uploading of GSP 2101 patches to laptop?
2011-07-19 by chris.pelayo@sbcglobal.net
Thanks a ton M2! Gonna try it soon. - Sent from Chris R. Pelayo s Blackberry ... From: M M Sender: gsp-2101@yahoogroups.com Date:
Can I buy a 2101 power transformer??
2011-07-18 by krazydog
Luckily I have two 2101 units but one of them the power transformer needs to be replaced. It came loose (a few times) & now the wires are exposed very close to
RE: [gsp-2101] Uploading of GSP 2101 patches to laptop?
2011-07-18 by M M
It s not too difficult (Disclaimer: this procedure is partially from memory). Assuming your Sonar version is like mine and that your 2101 is properly connected
Re: [gsp-2101] Uploading of GSP 2101 patches to laptop?
2011-07-18 by chris.pelayo@sbcglobal.net
Sweet. I have Sonar. - Sent from Chris R. Pelayo s Blackberry ... From: M M Sender: gsp-2101@yahoogroups.com Date: Mon, 18 Jul 2011
RE: [gsp-2101] Uploading of GSP 2101 patches to laptop?
2011-07-18 by M M
You can do a sysx bulk dump (and subsequent restore) of your 2101 system data using Cakewalk/Sonar if you happen to have it installed. I assume there are other
Re: [gsp-2101] Uploading of GSP 2101 patches to laptop?
2011-07-18 by Neil Rego
Thanks for the clear & crisp information,Graham..Appreciate it.. ... From: Graham Pearson Subject: Re: [gsp-2101] Uploading of GSP 2101
Re: [gsp-2101] Uploading of GSP 2101 patches to laptop?
2011-07-18 by Graham Pearson
Neil: You will lose patches 1 - 100 (user programs) when you change your battery. MIDIWizard makes a backup of all user programs 1 - 100 and any associated
Re: [gsp-2101] Uploading of GSP 2101 patches to laptop?
2011-07-18 by Neil Rego
As I understand ,patches 1-100 can be edited and those from 101-200 cannot be edited. When the lithium battery is removed, which would entail a reset, which
Re: [gsp-2101] Uploading of GSP 2101 patches to laptop?
2011-07-18 by Graham Pearson
None of the software packages Dieter lists on his website work with recent versions of Microsoft Windows such as XP, Vista, or Windows 7. Only MIDIWizard
Re: [gsp-2101] Uploading of GSP 2101 patches to laptop?
2011-07-18 by C Mead
This will help: http://www.tube-tester.com/sites/gsp2101/sites/gsp2101main.htm ~Chris ... This will help:
Re: [gsp-2101] Uploading of GSP 2101 patches to laptop?
2011-07-18 by chris.pelayo@sbcglobal.net
Oh yeah, I do actually have a Tascam MIDI to USB interface but alas I ve never used it. And I have a Windows7 i5 machine w/8gb memory. Pretty capable
Re: [gsp-2101] Uploading of GSP 2101 patches to laptop?
2011-07-18 by chris.pelayo@sbcglobal.net
I too need to back up all of my patches but y know I bought my 2101 brand new back in the early 90 s but never got around to getting the whole MIDI thing down.
Re: [gsp-2101] Uploading of GSP 2101 patches to laptop?
2011-07-18 by chris.pelayo@sbcglobal.net
I too need to back up all of my patches but y know I bought my 2101 brand new back in the early 90 s but never got around to getting the whole MIDI thing down.
Uploading of GSP 2101 patches to laptop?
2011-07-17 by Neil Rego
Hi, It appears that I may need to remove the lithium battery from the unit ,which would entail in my presets being erased. Could you let me know how I
Re: [gsp-2101] Banks/Patches sitching back & forth automatically?
2011-07-12 by Filip Wyrwa
And make the backup of your patches before... Cheers, Filip www.facebook.com/twelvemoonsband
RE: [gsp-2101] Banks/Patches sitching back & forth automatically?
2011-07-12 by M M
Do you have any devices plugged into the midi port? Does the unit sit anywhere were there is vibration (such as on top of a speaker cabinet)? How is the power
Re: [gsp-2101] Banks/Patches sitching back & forth automatically?
2011-07-12 by tguitar
Take off the top cover of the unit. Right behind the LCD Display or close to it, you will see a button cell battery. Make sure the unit is powered off before
Re: [gsp-2101] Banks/Patches sitching back & forth automatically?
2011-07-12 by Neil Rego
Thanks for the reply & sorry if I do not sound too technical.Can you tell me where the battery s located? ... From: tguitar Subject:
Re: [gsp-2101] Banks/Patches sitching back & forth automatically?
2011-07-12 by tguitar
try changing the battery ... From: Neil Rego To: gsp-2101@yahoogroups.com Sent: Tuesday, July 12, 2011 6:07 AM Subject: [gsp-2101] Banks/Patches sitching back
Banks/Patches sitching back & forth automatically?
2011-07-12 by Neil Rego
Hi All, Since yesterday, whenever the unit is switched on & I use a particular patch, after 10-15 mins, the patch switches to another one automatically.Eg.
RE: [gsp-2101] Re: Control One Problems
2011-07-06 by M M
I d be especially suspicious of that cable. I ve had plenty of regular midi cables go bad out of the blue. Maybe test the cable for continuity with a
Re: Control One Problems
2011-07-06 by Mike DeVirgilio
I would rule out the external stuff as a problem first: make sure my 7-pin midi cable is good; then try it and foot unit with another Digitech unit that you
Control One Problems
2011-07-05 by Joe
I recently bought a GSP2101 and Control One footpedal off of eBay. After a few weeks of playing with the unit I plugged in the Control One and it didn t work.
Re: [gsp-2101] 2101FC footswitches ???
2011-07-05 by chris.pelayo@sbcglobal.net
Cool! Thanks for the tip. Chris P. & his Flying V - Sent from Chris R. Pelayo s Blackberry ... From: M M Sender:
RE: [gsp-2101] 2101FC footswitches ???
2011-07-05 by M M
Maybe see if you can find the replacment part: http://www.digikey.com/ Never put off till tomorrow what you can ignore entirely. To: gsp-2101@yahoogroups.com
2101FC footswitches ???
2011-07-05 by chris.pelayo@sbcglobal.net
Has anyone had any luck replacing or repairing one of the footswitches on the 2101FC? I ve got a non functioning switch (not the plastic cover but the actual
2101FC footswitches ???
2011-07-05 by chris.pelayo@sbcglobal.net
Has anyone had any luck replacing or repairing one of the footswitches on the 2101FC? I ve got a non functioning switch (not the plastic cover but the actual
Just added : Bunches of link for users and tech info
2011-07-05 by Scott
See the links database
Re: Help! 2101 on the fritz
2011-07-05 by Scott
... I know you ve changed tube but if the high-voltage for the tube circuits isn t right , you wont have any proper pre-amp feed. I dont have a schema but you
Re: Help! 2101 on the fritz
2011-07-04 by Dan
I have done a reset and changed out the tubes without success but I will try changing the battery and cleaning it out. Chris, you make a good point about
Re: [gsp-2101] Help! 2101 on the fritz
2011-07-04 by chris.pelayo@sbcglobal.net
I think what MM said about replacing the battery, resetting, etc should be automatic considering the long time without use. Might also give the entire inside
RE: [gsp-2101] Help! 2101 on the fritz
2011-07-04 by M M
Fresh battery, do a reset, maybe reseat all the chips and ribbon cables. I f had things stop working after storage/moving and reseating stuff fixed it (just
Help! 2101 on the fritz
2011-07-03 by Dan
I recently tried using my 2101 after a long period in storage. When I turned it on, everything started as usual but the only sound I got was this horrible
tube distortions not passing signal
2011-06-22 by Mark Connley
i have swapped tubes and tried a hard reset ..pulled the board out to look for soldier issues..hardware version 11-5039-a14....t9-24??written in marker?? a
RE: [gsp-2101] Re: calibrate
2011-06-22 by M M
I have 2.06.06 I don t think it s software because it didn t do it before and now all of a sudden.. Never put off till tomorrow what you can ignore entirely.
Re: calibrate
2011-06-22 by notaspeckofcereal
... It s cheap enough to try. But I suddenly remembered that there was a squeal a previous ROM version used to make in certain situations. Upgrading to the
Re: [gsp-2101] calibrate
2011-06-20 by chris.pelayo@sbcglobal.net
Different tubes are constructed differently and some are tighter (so-to-speak) giving a bit more of a controlled & smooth response. Again I would recommend
RE: [gsp-2101] calibrate
2011-06-20 by M M
So would you think that replacement tubes would cure the squealing noise? It seems like applying gain to the 2nd tube causes it more. I suppose the original
Re: [gsp-2101] calibrate
2011-06-20 by Hari Floura
I concour with Graham, Doug s Tubes is an exellent and reliable source or tubes. Doug actually made up a sampler set for me so I could try different
Re: [gsp-2101] calibrate
2011-06-20 by Dieter Waechter
... Of course th unit still works fine. ... After replacing the tubes AND calibrating I doubt that you can hear a sound difference. You only can measuere it.
Re: [gsp-2101] calibrate
2011-06-20 by Dieter Waechter
... See here at my page: http://www.tube-tester.com/sites/gsp2101/sites/gsp2101test_procedure.htm Dieter
Re: [gsp-2101] calibrate
2011-06-20 by Graham Pearson
Regarding a source for 12AX7 tubes, I repeat my previous recommendation, Doug s Tubes: http://www.dougstubes.com/preamp-tubes/12ax7-ecc83-7025.html?limit=all
Re: [gsp-2101] calibrate
2011-06-20 by Graham Pearson
I ve successfully tried all kinds of 12AX7 tubes in both my regular 2101 and my 2101 Pro without any ill side effects. Yes, your 2101 might sound different
RE: [gsp-2101]
2011-06-20 by M M
Try these monkey brains! They re delicious! ? Never put off till tomorrow what you can ignore entirely. To: gsp-2101@yahoogroups.com From:
RE: [gsp-2101] calibrate
2011-06-20 by M M
It s confusing but it seems like many people are buying whatever tubes and putting them in and it works fine? I see that its possible that your 2101 might
calibrate
2011-06-19 by mikedv1
How do you calibrate preamp tubes for the 2101?
Re: [gsp-2101]
2011-06-19 by Dieter Waechter
... Grab a pair of these! These are Shuguang silver dragon. Dieter