RE: [Suspected Spam] [DSI Synths] Re:PEK
2009-02-25 by Iain Bryden
I m torn between the Keith Emerson pit from the 70 s with the giant Modular in the background and Tony Kay s setup with Yes in their 9021 Live tour - a
Messages
Browse messages
Page 16 of 144 · 7159 messages matched
Re:PEK
2009-02-25 by Bodie
Dale you have always had a great setup ;-) For me, it s three racks like so top to bottom: Prophet PEK Yamaha S90ES Nord G2X Nord Wave Nord Stage 73 Moog
Re: [DSI Synths] Re:PEK
2009-02-24 by Dale
;-) fav configuration right now SE Prophet 08 on top PEK middle Korg Extreme bottom that rounds up the core sure there are many other synths here, hardware
soundtower question
2009-02-24 by Harry Pinna
I have a desktop evolver and a remote zero SL that I m using with the soundtower editor on a Mac. I am trying to use the controller map so that when I move a
Re: [DSI Synths] Re:PEK
2009-02-24 by John Wieczorek
To get rid of an extra 20K I guess! I m preaching to the choir here, but I think that the evolvers are very, very deep units. and often compare mine to an Arp
Re: [DSI Synths] Re:PEK
2009-02-24 by dustin sedlacek
Sounds like the PEK is a monster! Why would anyone buy a Buchla 200e ? ... -- Dustin Sedlacek Marketing Concepts 901-828-6801
RE: [DSI Synths] Re:PEK
2009-02-23 by Iain Bryden
Also, ulike using 4 individual Monos, Combo mode is very limited. If you send a patch change to one part of the combo all parts of the combo change to that
Re: [DSI Synths] Re:PEK
2009-02-23 by evening@soundgate.org
One thing to note is that the PEK only has one set of inputs - so it s not exactly like having multiple Evolvers.
Re:PEK
2009-02-23 by Mark Lewis
BOTH. In combo mode it can act as 2,3,4 Evolvers... or it can be a poly synth but it does allow you to stack voices too.
PEK
2009-02-23 by dustin sedlacek
Is the PEK like having 4 evolvers in a box? Or is it a Ubersynth with 16 oscillators and 16 LFOs ? -- Dustin
New file uploaded to DSI_Evolver
2009-02-21 by DSI_Evolver@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the DSI_Evolver group. File : /Dave Smith
Controlling Poly Evolver Rack with Novation Automap 3
2009-02-13 by stefan_audioengineer
Hello Everyone, I have already setup templates for Pek useing the automap software. They work fine and I get to control a lot of parameters in
Re: [DSI Synths] Cleanest Evolver thru settings?
2009-02-12 by peter sedin
have the hipass filter set to zero, as it`s kind of noisy..boost your signal with a touch of dist(3-4) signal gets kind of amped this way..if you want a
Cleanest Evolver thru settings?
2009-02-12 by m.calhoun
Hello, I just added my desktop Evolver to an FX chain on my mixer s aux bus. The signal flow is something like: mixer send - Evolver - some guitar pedals -
Re: [DSI Synths] Re:Strange knob behavior on my MEK
2009-02-08 by Danny
Actually, It was just the one knob. I got my new one the other day and so far so good..........
[DSI Synths] FS: Prophet 08
2009-02-07 by Joe McGinty
I m selling my Prophet 08. It s a great sounding synth, but I m not using it so much. I m pretty well covered in the analog polysynth department. It s less
Re:Strange knob behavior on my MEK
2009-02-07 by colossalhoagie
Sorry this turned into such a long winded response on this matter. Hopefully it is helpful to someone experiencing encoder frustrations. I too recently had
Re: [DSI Synths] All 4 voices heard in Mono Mode
2009-02-05 by synthmdl76
thanks for the Rep. But Im talking about the 4 voice boards, not the 4 osc. say you put the poly evolver in program mode and play 4 different notes (you see
Re: [DSI Synths] All 4 voices heard in Mono Mode
2009-02-05 by dustin sedlacek
Each OSC has a level control, you want to adjust the level of each osc as needed. ... -- Dustin Sedlacek Marketing Concepts 901-828-6801
All 4 voices heard in Mono Mode
2009-02-05 by synthmdl76
ok, lets say I want to only use 1 voice for drone type sounds. I turn it to mono mode and then as I raise the Amp level to get my drone sound, ALL 4 of the
PEK new(er?) OS update
2009-02-04 by synthmdl76
I have a PEK that seems to be fine other than the sometimes rotory glitchiness. Is there anything the newest os update fixes thats important? See.. I have no
Re:Strange knob behavior on my MEK
2009-02-03 by J Lesser
Hmm... I guess I m having a hard time believing its an encoder since it seems to be happening across ALL the knobs... Is there any possibility this is a
[PEK] scriptname
2009-02-02 by chuckchilloutfr
Hi, does anyone knows where can I find the programs and combis list ? I d like to call them directly from my sequencer.. Thanks Fred.
Re: [DSI Synths] play different programs in cubase
2009-02-02 by chuckchilloutfr
... playback in ... Settings ... Yes, when Clock is set to INTERNAL I can start/play sequences manualy, but the synth is not sync with the PC anymore.. Is it
Re:Strange knob behavior on my MEK
2009-01-31 by dankselly
I contacted DSI tech support and was told it was a bad encoder. I happened to be within the 30 day return policy so I was able to exchange it-I m still waiting
Re: [DSI Synths] play different programs in cubase
2009-01-30 by Stefan Trippler
I use the mode key triggers and resets sequencer for that. Works flawlessly. ... From: Iain Bryden To:
Re: [DSI Synths] play different programs in cubase
2009-01-30 by Filch
... Yes, it is possible. Check the manual section for Global and Clock Settings
Re:Strange knob behavior on my MEK
2009-01-30 by J Lesser
UGH... Did replacing them fix the issue? ... me the ... them in, ... don t seem
RE: [DSI Synths] Mopho loads Prophet 08 banks!
2009-01-30 by Iain Bryden
Good to know. I wonder if that works the other way as well. Makes sense since the Prophet 08 is basically a PEK, + polyphony, - delay, - digital oscs. Perhaps
RE: [DSI Synths] play different programs in cubase
2009-01-30 by Iain Bryden
Unfortunately The Poly Evolver won t work that way. You can t send a patch change to an individual part. This is contrary to the DSI claim that a Poly Evolver
[PEK] combo issues
2009-01-29 by chuckchilloutfr
hello, I ve just purchased the PEK and try to set a combo of 2 instruments to play them simultaneously and separatly within Cubase. But as I try to change
[DSI Synths] Re: Strange knob behavior on my MEK
2009-01-29 by synthmdl76
same thing happens on the pek. but its not to bad. I think its just that the encoders are having some minor bounce (or de-bounce) issues. But i could be
Free Evolver Editor
2009-01-29 by enzogiovanni1986
Here it is: http://electro-music.com/forum/viewtopic.php?p=225878#225878
play different programs in cubase
2009-01-28 by chuckchilloutfr
hello everybody, I ve got my PEK since few days and I m struggling with combis and sequences ! Manual is not very clear for me, especially the way of using the
Re: [DSI Synths] delay 3 feedback
2009-01-27 by dustin sedlacek
Thanks Christian, that is the answer that I needed. I didnt assume that the internal feedback affected the delay, but I was assuming that the three delay taps
Re: [DSI Synths] delay 3 feedback
2009-01-27 by Christian Brun
You have got the feedback/delay stuff messed up, I think.. -There are 3 delays. In each of these 3 you can set time , amount , and feedback 1&2 . Feedback 1
delay 3 feedback
2009-01-27 by dustin sedlacek
I read through the manual, it seems that delay 3 feedback is not documented well. Is it a part of the feedback path? Is it the sum of feed back 1 and 2? I
Mopho loads Prophet 08 banks!
2009-01-27 by jdroecker@ymail.com
I looked on this group and found no mention of being able to load Prophet 08 banks into the Mopho. Well I just did it and it worked flawlessly! Used SysEx
Strange knob behavious on my MEK
2009-01-21 by Geoff Hood
Well, it appears we re not alone in this bizarre behaviour. Does anyone have any solutions to this problem then? I m really hoping it s a software fix, as
Re: [DSI Synths] Re: Strange knob behavior on my MEK
2009-01-20 by Danny
That s sort of what s happening, but it eventually makes its way up to 100.
Re: Strange knob behavior on my MEK
2009-01-19 by J Lesser
I ve been having this same issue for a little while. Mine, however, gets shaky and jumps randomly thru values...
DSP - OS update incomplete
2009-01-19 by Geoff Hood
I had same problem. I m away from my MEK/Midi-ox at the moment, but try messing with the settings for the sysex transfer (decrease speed, increase buffer and
Re:Strange knob behavior on my MEK
2009-01-19 by Dave Hartl
Yes, this is a problem I had on a half-dozen knobs on mine. DSI sent me the rotators when I contacted them, and I had my local repair guy put them in, but he
Strange knob behavior on my MEK
2009-01-16 by dankselly
Hi, I bought my MEK about 2 weeks ago, and I m having problems with the OSC Level knob when decreasing the value. If I don t turn it VERY slowly, the value
Re: Greetings and a question
2009-01-16 by spectralhelix
Just to let you know that my Axiom key and Evolver are now happily talking to each other, just as they were , CC commands with no tweaking or anything. It
Re: [Evolver] clipping
2009-01-12 by sushipizzascience
Do the calbration (reset + num 2) and load the latest OS systems. Helped in my case. ... osc at ... ok,is it ... modular,not ... that
Re: OSC Bleeding & OS Update
2009-01-12 by sushipizzascience
Software update worked finally with another MIDI Interface. Bleeding solved with the calbration routine. Did not get it to work earlier because the calibration
Mono Evolver - DSP OS update incomplete...
2009-01-11 by gil_we
I was trying to upload my Mono Key Evolver with the latest DSP version 3.4, using MIDI-OX. The dump was working ok while MIDI-OX suddenly reported some kind of
Mopho free editor
2009-01-11 by Kotró László Lehel
Hi! The new free Mopho editor available in files section or http://lady.rdsor.ro/~kotro/mopho features -sound editor -sound organizer -sound restrictioned
Re: Greetings and a question
2009-01-06 by spectralhelix
Yes, there s a good selection of CC commands, I found the list at the DSI site, so that ll work OK - in principle. But at the moment I m frustrated by the