[Digital BW] Re: Custom sizes on mac -3800/3880 printer
2011-04-22 by frankg_photo
I can understand why a bigger margin may allow for operator error (paper taped to substrate), but i dont understand why it would make a difference to whether
Messages
Browse messages
Page 141 of 2186 · 109257 messages matched
Re: [Digital BW] "spotting" K3 PK prints
2011-04-22 by jvee
I believe that there was a reference somewhere to a new pigment ink spotting pen set just for inkjet prints which was archival etc. Anybody recall this? J
Re: [Digital BW] Re: Custom sizes on mac -3800/3880 printer
2011-04-22 by anne saint Peter
That sounds correct. I have to set my margins for a bleed and operator error (me). Basically you are tell the printer where on the paper or substrate to print
Re: Custom sizes on mac -3800/3880 printer
2011-04-22 by frankg_photo
Would you say that if my paper is 17 (43 cm) wide (call it my substrate ) and my image is sized to 15.75 inches (40 cm) (call it my paper ) the difference is
Re: [Digital BW] Custom sizes on mac -3800/3880 printer
2011-04-22 by anne saint Peter
The front feeder will only take paper 16 inches wide. What I am printing now is 14 x 30+ .The substrate has been 15 x 35. I set the paper size for 15 x 30 and
Re: [Digital BW] Custom sizes on mac -3800/3880 printer
2011-04-22 by frankg_photo
Thank you Anne, It is encouraging that you have the same OS and it s working for you. I have not tried the Front Feeder nor have I ensured 1/2 inch margins. I
Re: [Digital BW] Custom sizes on mac -3800/3880 printer
2011-04-22 by anne saint Peter
Not sure what help this is...I m printing up 30 + inches on my 3800 using the front feeder. I am using a larger, 35 inch substrate to hold my paper. I just
Custom sizes on mac -3800/3880 printer
2011-04-22 by frankg_photo
I am trying to print an image that is sized to 40cm x 60 cm (23.619 inches x 15.747 inches) on an epson 3880. Since the image is longer than the preset paper
Re: Cleaning 3800 print head
2011-04-22 by Harry Lockwood
Richard, On the Epsons I ve owned (now, the 2400), pulling the plug while the head is in motion, say, during a nozzle check, prevents it from locking up. Harry
Re: [Digital BW] "spotting" K3 PK prints
2011-04-22 by Ernst Dinkla
... They are made to be filled by the user. Are cartridges really empty when declared empty these days ? A syringe is needed to pull the remaining ink out and
Re: Epson 2000P refillable cartridge problem--Help
2011-04-22 by Paul
... In the older 2000p carts there was a tape/yellow tab that had to be removed. It covered the air inlets. In the photo you link to above of the cart it
Re: [Digital BW] "spotting" K3 PK prints
2011-04-22 by Richard Smallfield
Hi Frank, The best method I ve found, that works perfectly once mastered, is to just do what you would with a silver gelatin print: some black retouching ink
Cleaning 3800 print head
2011-04-22 by Richard Smallfield
Hi, my printer s had a break for a couple of months and I had bad clogging problems (funnily enough they only started after the first three prints). I found
Re: [Digital BW] "spotting" K3 PK prints
2011-04-22 by Marks
try printing a small section of the effected area on a acetate media, such as pictorico trans, or absolute backlight, that will not absorb the ink , then
Re: [Digital BW] "spotting" K3 PK prints
2011-04-22 by frankg_photo
how do you fill the pen nyway...is it easy ?
Re: [Digital BW] "spotting" K3 PK prints
2011-04-21 by frankg_photo
Thanks. I was hoping to not have to open a separate cartridge :-(
Epson 2000P refillable cartridge problem--Help
2011-04-21 by ioannislambadaris
Hello I am converting my EPSON stylus photo 2000P into BW. I have bought the MIS BW inkset (EBONI6) from www.inksupply.com. Upon trying the color TO16
Re: [Digital BW] "spotting" K3 PK prints
2011-04-21 by Ernst Dinkla
... Mars-Staedtler Marsmatic 700 ISO 0.13 mm or alike filled with inkjet ink. -- Met vriendelijke groeten, Ernst Try:
"spotting" K3 PK prints
2011-04-21 by frankg_photo
anyone had success with a pigment pen or similar for spotting gloss black? Prints have large areas of plain photo black and are ruined by the occasional white
Re: [Digital BW] Hi
2011-04-18 by andy bessette
Spam. ... From: Paul Banks Subject: [Digital BW] Hi To: DigitalBlackandWhiteThePrint@yahoogroups.com Date: Monday, April 18, 2011,
Hi
2011-04-18 by Paul Banks
I scored $347 in a day or so on the web. collected it easily from - http://x.co/WeA7 - you will love life so much more!
Re: [Digital BW] 3880 or 4880 help please ?
2011-04-17 by Andrew Darlow
Hi Frank: The main differences are not in the hardware, but in the software. Most photographers have no need for the graphic arts edition-there is no 3880
Re: [Digital BW] 3880 or 4880 help please ?
2011-04-16 by pdesmidt tds.net
I have a 4880. It is a much bigger and more substantial unit than the 3880, and the cartridges are much, much bigger, which save lots of money in the long run
Re: [Digital BW] 3880 or 4880 help please ?
2011-04-16 by frankg_photo
Thanks for the reply and the article link. II think the choice is clear - 3880. However what s between the regular, the portrait, the pro & the graphic arts
Re: [Digital BW] 3880 or 4880 help please ?
2011-04-16 by Andrew Darlow
Hi Frank: You have another option these days, and that s the Epson Stylus Pro 4900. The advantage of the Stylus Pro 3880 and Epson Stylus Pro 4900 are that
3880 or 4880 help please ?
2011-04-16 by frankg_photo
I ve been out of the loop for some time now. I want to upgrade my 2200 printer for one that can do bigger sheets and I think the options are the 3880 or 4880.
Re: [Digital BW] 1100 & Eboni-4
2011-04-15 by Phillip Kimble
Paul, For what it is worth, I ordered fresh bottles of Eboni in the various tones to provide a fresh baseline. Inksupply does state the base can be used to
Re: [Digital BW] 1100 & Eboni-4
2011-04-14 by Paul
... Carbon is our most stable pigment, and Eboni is the most neutral carbon. That is what Eboni-6 is for. It is for matte paper only. ... Those are the
Re: [Digital BW] 1100 & Eboni-4
2011-04-14 by Phillip Kimble
Paul, You are a tremendous help and a very patient person. Thank you for both. I think I lack the basic understanding of what each inkset is developed from and
Re: [Digital BW] 1100 & Eboni-4
2011-04-14 by Paul
... The glossy carbons from MIS -- for example the K4 PK, LK, & LLK are pure carbon -- no colors mixed in. The Plus inks are where the color is. The reasons
Re: [Digital BW] 1100 & Eboni-4
2011-04-14 by Phillip Kimble
Paul, I think I am completely and definately turned around backwards and a little inside out. What you are sayng is the K4+ inks are not pure carbon inks in
Re: [Digital BW] 1100 & Eboni-4
2011-04-14 by Paul
... I m not sure I understand what you re asking here. K4+ (http://www.paulroark.com/BW-Info/4K+.pdf) used Eboni Mk for the K, but then used the
Re: [Digital BW] 1100 & Eboni-4
2011-04-13 by Phillip Kimble
Paul, So UT14-K and Eboni MK are the same ink even though the label on the bottle is UT14-4-K . I can live with that. I need to order more matte black &
[Digital BW] Re: Monaco Profiler now officially dead.
2011-04-13 by dfaprinting
No emails back yet. I sent one this morning saying that there is no way that I can allow Xrite to remotely connect to my computer when ever they desire, this
Re: [Digital BW] Re: Monaco Profiler now officially dead.
2011-04-13 by Ernst Dinkla
On 04/13/2011 05:14 PM, mrjimbo wrote: Many including me still scan originals via drum or flat bed.. additionally their will in the not distant future be no
Re: [Digital BW] 1100 & Eboni-4
2011-04-13 by Paul
... All MIS matte blacks in the inksets we usually talk about are Eboni MK -- the same ink. The midtones in UT14 are not based on Eboni. They are glossy
Re: [Digital BW] 1100 & Eboni-4
2011-04-13 by Phillip Kimble
Paul, Is there a difference between the MIS Eboni ink and UTR14 ink- black or Eboni-K vs UT14-K in specific? ________________________________ From: Paul
[Digital BW] Re: Ink on Paper Workshop
2011-04-13 by Paul
pdesmidt tds.net wrote: ... I once adapted my Rollei SL66 lenses to a Canon (FD mount). I ran into the same issue that the wide angle didn t
Re: [Digital BW] Re: Ink on Paper Workshop
2011-04-13 by pdesmidt tds.net
... That s a pretty neat setup. I have a Nikon PB4 macro bellows, and it works well, except for wide angle lenses and non macro focus. [Non-text portions of
Re: Ink on Paper Workshop
2011-04-13 by Paul
... Thank you. That was another multi-focus zone shot, this time with a 35mm and full frame digital. Three shots were taken, using a tripod. While I ve been
Re: [Digital BW] Re: Monaco Profiler now officially dead.
2011-04-13 by mrjimbo
A few added things/... I m looking deeper into this presently and can t seem to get what xrite is up too. In effect this is by no means an upgrade as I see it
Re: Ink on Paper Workshop
2011-04-13 by Clayton Price
Paul - What a beautiful shot - I like Roy s also, but the unusual composition of yours is striking. Thanks for sharing it with us -- Makes me hungry for the
Re: Ink on Paper Workshop
2011-04-13 by Roy
And another Buttermilk viewpoint: http://harrington.com/mar2011/content/10_021_buttermilks_2_large.html Roy www.harrington.com
Re: Ink on Paper Workshop
2011-04-13 by Paul
... in Bishop, California in September... www.ovimaging.com While I have not participated in Tom Mallonee s workshops, I ve seen his excellent work and know a
Re: Exhibition of Eboni 6 Carbon Prints at Light Work in NY
2011-04-13 by scalesnyt
All digital. Nikon D700 Prime lenses only. Used Quadtone RIP and an Epson 1400 printer. PremierArt Smooth Fine Art 325 Paper - and PremierArt Generations
Re: Exhibition of Eboni 6 Carbon Prints at Light Work in NY
2011-04-13 by scalesnyt
I used both the PremierArt Smooth Fine Art 325 Paper and the PremierArt Generations Alise Museum Fine Art Paper - Natural White I ultimately think I prefer the
Re: Monaco Profiler now officially dead.
2011-04-13 by dfaprinting
Thanks for the tip on the issues, I have some questions to ask when I call them. The lack of scanner profiles will be an issue since I do still use film. The
Re: Monaco Profiler now officially dead.
2011-04-12 by tboleyyh
i1Profiler is a v1.0 product release, and bringing it to market was apparently arduous enough to face constant delays. Now that users have their hands on it,
Ink on Paper Workshop
2011-04-12 by tmallonee2001
We still have some spaces available for the Seventh Annual Ink on Paper Workshop in Bishop, California in September. We can t promise you the serenity,
1100 & Eboni-4
2011-04-12 by Paul
MIS has loaded Eboni-4 (100%, 18%, 6%, & 2%) into carts for the Epson WorkForce 1100. See http://www.inksupply.com/epson_workforce_1100_eb4.cfm I have a brief