Yahoo Groups archive
Messages
Page 122 of 564 · 28179 messages matched
2011-02-01 by Alan
Thanks again Florian. I'll have a look at these videos. By the way, do you know if this form of synthesis is in any way related to how the, much maligned, Korg Poly 800 generates its tones? It too uses the 16, 8, 4, 2 footages of square waves, which can be combined to evince a ba
2011-02-01 by watson
apparently the demand for these modules is not as high as it was a few months ago. i will be accepting offers. also if you want to do some cash plus trade i am looking for a yamaha fs1r or a jomox 888 info below: These are brand new, i just received them in the mail today. since
2011-02-01 by Bakis Sirros
thanks for posting! listening to it now, very interesting! best regards, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Worlds/192093934136476 www. myspace. co
2011-02-01 by yahoo@doepfer.de
> Thanks for the help! I tried buying a compatible wall wart, but > there was no luck... Is there any way to purchase the original > one supplied by doepfer? > > Best, > David Of course. Please contact the Doepfer representative in your country. From your message I cannot see whe
2011-02-01 by ben_n_cameron
Hey All, I have a new 10 track digital album out over on www.isotopeofme.bandcamp.com. I look forward to hearing what you think, even if you just give it a listen, but don't feel like buying. Of course, I hope you like it, and spread the word to your friends. To make this on-topi
2011-02-01 by David Núñez
Thanks for the help! I tried buying a compatible wall wart, but there was no luck... Is there any way to purchase the original one supplied by doepfer? Best, David El 13/12/2010, a las 13:02, escribió: > > Dear All, > > > > I connected my dark energy to a 9V wall wart by mistake,
2011-01-31 by watson
These are brand new, i just received them in the mail today. since i ordered them my needs have changed so i will be letting these go. i am asking 1200 dollars each or best offer. located in bristol va 24201 USA you can look here for pictures https://picasaweb.google.com/11697545
2011-01-31 by Florian Anwander
Hi Alan unfortunatley my SH3a is parts and pieces at the moment: not in a shippable state definitely ;-) Nevertheless these my give some ideas: http://www.youtube.com/watch?v=QuqWtlKZCYY http://www.youtube.com/watch?v=dJ4I5Tgxs8E Also the way Roland made string sounds in the RS09
2011-01-31 by abstractjuz
Hello - my first post here after a little while of lurking. I currently have 5 Doepfer Eurorack modules for sale on eBay. No - I'm not getting rid of my modular - just changing the way it's organized. I'm based in the UK - but I'm happy to ship internationally and offer shipping
2011-01-31 by Bakis Sirros
hi list, added many tracks to our PW Reverbnation page player: http://www.reverbnation.com/parallelworlds#!/artist/artist_songs/1244432 tracks that use the mighty (and underrated by some) Doepfer A100: Sorinel (extract only) (from album 'Circo Divino' with Alio Die, HSL, 2010, IT
2011-01-30 by Shrewsbury Marie
Just thought i'd share this here as it's mostly Doepfer, using the A155 to generate odd and even clock divisions and then getting the TH48 sequencer to mod it's own clock source between them: http://www.youtube.com/watch?v=iFYXO5H2zKA Warning: May contain traces of arse. ________
2011-01-30 by dingfutzer
FS: Doepfer: a111 VCO - $249, a112 Sampler/Wvtbl - $220, a164-1 Manual Gate - $49, a190 Midi/cv w/5v adptr - $189, a100 psu-1 (650 ma) new $55, a199 Belton Spring Tanks (2) - new @ $10 Harvestman Tyme Sefari in box $259, Hertz Donut in box $325 Livewire Audio Frequency Gene
2011-01-30 by davevosh@aol.com
In a message dated 1/30/2011 8:44:11 AM Eastern Standard Time, synth_freak_2000@yahoo.com writes: you have to upload the photos to the photos section of the group. bakis, thanks - best, dave [Non-text portions of this message have been removed]
2011-01-30 by Bakis Sirros
hi Dave, you have to upload the photos to the photos section of the group. thanks, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Worlds/192093934136476 www. m
2011-01-30 by davevosh@aol.com
[Non-text portions of this message have been removed]
2011-01-29 by Jonathan Heslop
I will give a shout out to the love it/loath it A-136 Waveshaper. Unlike a filter, I never quite know what i'm going to get out of the waveshaper. Audio Frequency Modulated Nuts distortion: http://soundcloud.com/user8805415/doepfer-a-135-waveshaper-test Nice Rasp: http://soundclo
2011-01-29 by Jonathan Heslop
I have heard that if you turn all the knobs to 0 you can invert the origonal signal?!? Sold mine so I can't test it. I quite liked using mine towards the end of the signal path, after the filters. The F/16 output can always do some weird stuff if you use it to modulate filters/OS
2011-01-29 by Jonathan Heslop
In no order: A-145 - Why did I sell my second one?!? Often my patches are built around this humble module. A-125 - Put anything into this and it gets transported back in time to the 60's/70's - http://soundcloud.com/user8805415/a-diamond-sky A-101-2 - VERY good. Great as my main
2011-01-29 by Josef
In this sense 'Stringshit0065.mp3' sounds humorously ;-) An alternative is the A-113: http://www.modular-planet.de/synthlead/shanghai/shanghai.html --- In Doepfer_a100@yahoogroups.com, "Alan" wrote: > > Hey, thanks folks for such an enthusiastic response. These have all given me
2011-01-28 by jeph
5 is tough! Here are 8: 1. A106-1 - Gnarly crazy module, if you click with it, you might just be too sane. 2. A189-1 - Almost equally crazy when used for CV. Great for audio also. 3. A101-2 - Greatly overlooked warm, fun VCA. Also a great LPG/LPF. 4. A172 - I don't know how I liv
2011-01-28 by Alan
Thanks for the suggestion Florian. Do you think you could send me an SH3a so I can put it to the test? ;-) --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hello Alan > > you should look for some examples from the Roland SH3a. This might be a > suggestion. > > Flo
2011-01-28 by Alan
Hey, thanks folks for such an enthusiastic response. These have all given me a few more ideas of how best to employ the A-115. I particularly like the name of your patch Josef! I don't know how well it translates, but when 'strings' is closely followed by 'hit' it has a certain l
2011-01-28 by Josef
Patch example: http://www.modular-planet.de/instruments/stringshit/stringshit.html --- In Doepfer_a100@yahoogroups.com, "Alan" wrote: > > Hi folks, I'm new to modular synthesis and this is my first post to this group so please forgive my naivety. I recently purchased a second-han
2011-01-28 by Florian Anwander
Hello Alan you should look for some examples from the Roland SH3a. This might be a suggestion. Florian
2011-01-28 by Shrewsbury Marie
I've tended to use a A160 clock divider for sub osc sounds as i have that but not the A-115 and it can be clocked a fair way into the audio range. probably that works the other way too, some of the serious electronics heads here might know differently, but probably you can use th
2011-01-28 by zaum
You ideally run one oscillator into it. Whatever the frequency is that goes in you get a square wave that's half, a quarter, an 8th and a 16th of the frequency coming out with adjustable levels. In musical terms you get 1, 2, 3 and 4 octaves under separately adjustable. So it bas
2011-01-28 by David Núñez
Hi Alan, It's great that you have posted this question, because I too have the same impression. I do use it in an obvious kind of way, but ther's surely many cool alternatives & creative patches. I'll be looking forward to reading the group's replies. Best regards, David El 28/01
2011-01-27 by Alan
Hi folks, I'm new to modular synthesis and this is my first post to this group so please forgive my naivety. I recently purchased a second-hand, half filled A-100 G6. I though, at the price I paid, that it would be a good way of breaking into an area that has tempted me for years
2011-01-26 by Ross Goniakowski
I tested and couldn't detect a difference between the channels. I also tryed an old Roland BF-2 Flanger and the results were even worse, square wave "jumps" were completely rounded off. I don't detect much lag controlling an A-145, so I'm going to assume different devices respond
2011-01-26 by James Husted
Vactrols have a fairly high range of tolerance and in a single batch their may be ones that respond quite differently than others in the same bag. Do both channels in the module respond the same? The slewing in vactrols is part of their "charm" and won't be easily gotten away fro
2011-01-26 by Ross Goniakowski
Curious if it's possible to replace the vactrol on one half of the Universal Vactrol mod to get a quicker response. When I use it with an analog delay pedal there is a noticeable slew, not sure if that's how the pedal is reacting or if it's the value of the vactrol in question. I
2011-01-26 by yahoo@doepfer.de
> Hello Dieter, > > > The simplest "bus board" is nothing but a 16 pin ribbon cable > with several > > female connectors (10 or 16 pin, according to the connectors of > the modules) > > which are attached to the bus connectors of each module > (instead of the bus > > cable delive
2011-01-26 by Florian Anwander
Hello Dieter, > The simplest "bus board" is nothing but a 16 pin ribbon cable with several > female connectors (10 or 16 pin, according to the connectors of the modules) > which are attached to the bus connectors of each module (instead of the bus > cable delivered with the modul
2011-01-26 by yahoo@doepfer.de
> Hi Richard > > It should be very easy to make a bus board as DIY > > Get a striped breadboard pcb like > http://www.strippenstrolch.de/grafiken/loch1.jpg > Cut it to get a 8 holes wide strip and solder the 16 pin headers on it. > > Florian The simplest "bus board" is nothing bu
2011-01-26 by Florian Anwander
Hi Richard It should be very easy to make a bus board as DIY Get a striped breadboard pcb like http://www.strippenstrolch.de/grafiken/loch1.jpg Cut it to get a 8 holes wide strip and solder the 16 pin headers on it. Florian Scott schrieb: > ah, thank you Florian > > (though its 5
2011-01-26 by Richard Scott
ah, thank you Florian (though its 50 euros! ouch!) On 1/26/11 10:07 AM, Florian Anwander wrote: > Hello Richard > > Scott schrieb: > > is it possible to just buy the busboard on its own? > http://www.doepfer.de/a100z_d.htm > search for "A-100MNT" > Powerregulator and busboard are
2011-01-26 by Florian Anwander
Hello Richard Scott schrieb: > is it possible to just buy the busboard on its own? http://www.doepfer.de/a100z_d.htm search for "A-100MNT" Powerregulator and busboard are one pcb. Florian
2011-01-26 by Richard Scott
is it possible to just buy the busboard on its own? Richard -- my website is full of sounds and sights http://richard-scott.net
2011-01-26 by dancemachine
interesting thread. i dont have the numbers memorized so most of these lists mean nothing to me :P but i am digging: low pass gate precision adder (seems to be totally slept on) dual vc switch sequential switch quantizer honorable mention goes to the crazy 152 addressable 8 way s
2011-01-26 by martin sörensen
a101-2 lowpass gate a111 vco a142 vc decay/gate a155 sequencer a188-1 bbd delay /martin ----- Original Message ----- From: davevosh@aol.com To: Doepfer_a100@yahoogroups.com Sent: Friday, January 21, 2011 10:54 PM Subject: [Doepfer_a100] a fun question for 2011 - 5 favorite doepfe
2011-01-25 by Monroe Eskew
Price lowered to $400. Willing to ship anywhere. On Sat, Jan 22, 2011 at 10:23 AM, Monroe Eskew wrote: > This keyboard uses the Doepfer "A-100CGK" electronics kit plus a little > extra. It is housed in carefully cut, sanded, stained, and finished > hardwood, and has a nice alumin
2011-01-25 by Tony Steventon
Thanks for the nice comments about the adaptors everyone. I now also have a new variant that has sockets enabling you to plug an AS module into a Doepfer bus using an AS cable - check out my latest blog entry at http://synovatron.blogspot.com On the subject of AS and Doepfer hole
2011-01-25 by infrequent
On Thu, Jan 20, 2011 at 2:34 PM, wrote: > That's what needle files are for ;o) > Or individual hex nuts instead of rack strips. Excellent idea BTW. [Non-text portions of this message have been removed]
2011-01-25 by davevosh@aol.com
In a message dated 1/21/2011 4:55:18 PM Eastern Standard Time, davevosh@aol.com writes: hello to all, my 5 favorites : a-149-1/2 - my absolute favorite ! a-106-6 a-198 a-101-2 a-197 best, dave hello to all (again), well, thanks to those that replied - i found it fun and informati
2011-01-24 by Matt
I'd like to buy two A-132-3 modules but specifically want the CEM3360 version. Please let me know if you have one or two you'd like to sell. I'm in London UK and can pay by bank transfer within the UK or via PayPal. Matt
2011-01-24 by yahoo@doepfer.de
> I'd thought that the 'phase' of the lfo would be defined > by the capacitor that was being shorted. > So knowing this is not the case saves me from embarking on aa > doomed project. When the capacitor is discharged the LFO may start with the positive or negative slope. It depen
2011-01-24 by andy butler
yahoo@doepfer.de wrote: > There are no plans for a LFO reset feature. The reset circuit would be > larger than the LFO circuit itself (which is nothing but two opamps). It's > not only an electronic switch that shortens the capacitor of the LFO. You > also have to make sure that
2011-01-24 by yahoo@doepfer.de
> Anyone know if replacement knobs are available > anywhere for the Dark Energy? > (aside from buying another glide attachment) > > thanks > > andy butler The knobs are available as spare parts. You may order the knobs from the representative in your country (or directly from us
2011-01-24 by yahoo@doepfer.de
> Can anyone tell me if there are plans to give the Dark Time > the facility to retrigger the LFOs on the Dark Energy? > > Will there be information available above the technicalities of this? > > I'm not looking to get a Dark Time though. > My idea is to modify a DE so that the
2011-01-24 by yahoo@doepfer.de
> Dear Dieter, > > Thanks for your reply but, unfortunately, this is beyond my > ability, so can I send the modules back to you for modification? > > Thanks, > Matt It depends upon your home country. Shipments from outside the EU may cause a lot of troubles. It happened already t