Yahoo Groups archive
Messages
Page 158 of 564 · 28179 messages matched
2010-01-25 by Phil
Hi, It looks like the fuse in the back of my G9 suitcase blew this evening. I've taken the fuse out (at the back of the suitcase underneath the plug socket) and almost certainly is blown (I can the filament is broken). Could some one in the UK point me to where I can get a replac
2010-01-25 by james.husted@mac.com
I just saw the Sonic State video that showed the DIY synthesizer PCB and Dieter's home built box for it. One thing that stuck out for me was the shape of the DIY PCB. Dieter - Have you thought of making the DIY PCB in a square format instead of the long skinny one? A size that ca
2010-01-25 by yahoo@doepfer.de
> Hi Ollie > > > > I've seen that some of you uses the A-100 in a studio. Which > VCA would you recommend for studio applications to connect the > A-100 to the audio interface? > All A100 VCAs are ok for average synth use, but are not comparable to > the VCAs used in professional
2010-01-25 by davevosh@aol.com
In a message dated 1/25/2010 9:57:06 AM Pacific Standard Time, yahoo@doepfer.de writes: That's similar to our plans. But the "manual" has to include the basic circuitry for the touch sensing because it would not work to wire the pads over a long distance and then detect the touch
2010-01-25 by yahoo@doepfer.de
> dieter, > f.w.i.w., i`d like to see a "module" for the circuitry and a separate > "manual" ala a-198. > good luck ! > best, > dave That's similar to our plans. But the "manual" has to include the basic circuitry for the touch sensing because it would not work to wire the pads o
2010-01-25 by davevosh@aol.com
In a message dated 1/25/2010 5:06:24 AM Pacific Standard Time, yahoo@doepfer.de writes: > suspect i`m in the minority but i`d have preferred something more "controller" > and less "sequencer" from the touch unit but we`ll see what, if anything, emerges. At first the touch keyboar
2010-01-25 by david.salter@thomsonreuters.com
Hi Stu, Farnell sell them. No reason why you can't use them I can think of. David * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant SSG UKI Thomson Reuters O +44 (0)20 7542 2402X 52402 M 07990562402 david.salter@thomsonre
2010-01-25 by Bakis Sirros
great! waiting for poll instructions, Dieter. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist
2010-01-25 by grimshaw_stuart
hi group, despite repeated and varied googling, i have been unable to find a source of digital potentiometers in germany that will sell me, say, five units, as opposed to a thousand. more specifically, i'm looking for AD5206's. conrad doesn't stock them :) anyone got any tips? th
2010-01-25 by Howard & Di
HI All I love the idea of the low cost DIY synth, would it be possible to do the same thing with a low cost DIY step sequencer to make our own variant of a MAQ 16/3 Howard. [Non-text portions of this message have been removed]
2010-01-25 by yahoo@doepfer.de
> that aside - > what were the reactions to the touch kybd and other new modules - ? i Hi Dave, The reactions were very good but the problem is to find a consensus concerning the layout, shape, dimension and arrangement of the pads. Even the interest in the new modules (especiall
2010-01-25 by yahoo@doepfer.de
> the lower section of my a-156 is just putting out a steady 1.76 > volts. i have the jumper set so the upper section is affected by > the switches on the lower section, but the lower section doesn't > work with the jumper in either position. the upper section works. > any sugges
2010-01-25 by yahoo@doepfer.de
> I wonder can this boards used to build the polyphonic synth? > Sorry, if it sounds stupid, I'm really new to all this stuff. > > Mikhail The new version of the TKB shown at NAMM is fully polyphonic. The prototype worked perfect at NAMM. Now we have to decide how the TKB will be
2010-01-25 by david.salter@thomsonreuters.com
Thanks Florian David * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant SSG UKI Thomson Reuters O +44 (0)20 7542 2402X 52402 M 07990562402 david.salter@thomsonreuters.com thomsonreuters.com P Please consider the environmen
2010-01-25 by Florian Anwander
Hello David > Assuming that each board is set-up the same is there any reason why 4 > boards can not be wired to single set of controls and sockets? Only the VCF Cutoff, and the VCO tuning are direct voltage controlled parameters. All parameters of envelope, LFO, and all modulati
2010-01-25 by Мясоедов Михаил
Thanks for reply! May be the solution is to wire 1 knob to 4 boards in parallel. Is it possible? Mikhail On 25.01.2010, at 12:24, Florian Anwander wrote: > Hi Mikhail, > > >> I wonder can this boards used to build the polyphonic synth? >> Sorry, if it sounds stupid, I'm really ne
2010-01-25 by david.salter@thomsonreuters.com
Florian, Assuming that each board is set-up the same is there any reason why 4 boards can not be wired to single set of controls and sockets? David * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant SSG UKI Thomson Reuters
2010-01-25 by Florian Anwander
Hi Mikhail, > I wonder can this boards used to build the polyphonic synth? > Sorry, if it sounds stupid, I'm really new to all this stuff. Not a stupid question at all. Basically yes, but it would be always like the Oberheim SEM based two/four/eight/voice synths, with individual
2010-01-25 by yahoo@doepfer.de
> I tried a couple of things very quickly (the first one was > spectacularly ineffective!). However the following seemed OKish: > between C10 and Q7 there are 4 resistors - the 2k2 amongst these > is R24 (the 'bottom one' if you hold the faceplate nearest you); > swap this for a
2010-01-25 by yahoo@doepfer.de
> Hi, > > does anybody know, if it's possible to braze a separate VCO > output of the A-111-5? > > Ollie As the A-111-5 uses the CEM3394 there is no separate VCO output available. One the triangle would be available if the signal of the frequency capacitor of the CEM3394 is buffe
2010-01-24 by Bakis Sirros
welcome aboard Mikhail! Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk www
2010-01-24 by Мясоедов Михаил
I wonder can this boards used to build the polyphonic synth? Sorry, if it sounds stupid, I'm really new to all this stuff. Mikhail P.S. this is my first post, so I'm very glad to meet you here! On Jan 24, 2010, at 11:37 PM, okmog wrote: > It was released two days ago: > http://ww
2010-01-24 by davevosh@aol.com
hello to all - and, olli, funny you should post this today as i was going to ask about it myself - in the 30 sec. attention span age of the internet, video`s have become a more prevelent way to disseminate information. okay, fine as far as that goes but what about that segment wi
2010-01-24 by okmog
It was released two days ago: http://www.sonicstate.com/news/2010/01/22/wnamm10-doepfer-diy-synth-and-more/ BTW another interesting video about Dieter Doepfer themselves: http://www.sonicstate.com/news/2009/09/19/dieter-doepfer-totally-wired/
2010-01-24 by Soy Sos
Any more thoughts on this?
2010-01-24 by Bakis Sirros
Hello, For trade, is my fine condition Serge m-boat with ‘Quad Slope’ and ‘Gator’ m-odules, plus a PS2a power supply (euro plug), ready to play, for One of the following: Arp Odyssey plus 450 euros from your side Or Roland system-100m 191j cabinet (with 5 modules) plus 400 euros
2010-01-24 by mickgrit
Thanks folks, its good to know at least the filter is not faulty. Another thing on the list of modifications I will get round to doing one day! Mick --- In Doepfer_a100@yahoogroups.com, "okmog" wrote: > > > @ Ollie: it is my favourite filter. (Next to the wasp filter, that's > >
2010-01-24 by Mark Pulver
Pricing and other info is here: http://midiwall.com/forsale/ Analogue Systems RS40: Noise generator Doepfer A-101-1: Steiner Vactrol VCF A-101-3: Vactrol Phaser A-104: Trautonium Formant Filter A-120: 24db VCF A-127: VC Triple Resonance Filter A-136: Distortion / Waveshaper Elby/
2010-01-23 by goodnessgrows
thanks tim. after messing around with it some more, it is behaving differently, but still strangely. now the lower quantizer works as the upper one does, except with nothing plugged in the input it gives a steady 1.84 volts. when a signal is introduced to the input jack, it will
2010-01-23 by Tim
Make sure all the socketted ICs are firmly pushed in. Also make sure that all the jack sockets are making good contact with your patch leads. The two signal paths share parts of the three main ICs, so I'm thinking that if they work for one section, then why not for the other, so
2010-01-23 by goodnessgrows
the lower section of my a-156 is just putting out a steady 1.76 volts. i have the jumper set so the upper section is affected by the switches on the lower section, but the lower section doesn't work with the jumper in either position. the upper section works. any suggestions? it
2010-01-23 by dingfutzer
FS: Doepfer a165 Trig Mdfr - as new - $50 MFB 99 Mixer - new in box - $85 Behringer MDX 4600 Quad Comp/Lmtr - new in box - $55 http://home.ptd.net/~eyesaw/Misc/07.jpg Buyer pays shipping/ins & online fees - Bill in PA, U.S.A. [Non-text portions of this message have been removed]
2010-01-23 by okmog
> @ Ollie: it is my favourite filter. (Next to the wasp filter, that's > something different). > I use the A102 with very moderate resonance settings. I just love diode > filters. Wow, that's impressive. I really have to try them! Thank you. I think I should try them all! ;) > Bu
2010-01-22 by achtung_999
@ Ollie: it is my favourite filter. (Next to the wasp filter, that's something different). I use the A102 with very moderate resonance settings. I just love diode filters. But the A108 is also very good. But the character is completely different. It's like comparing apples and pe
2010-01-22 by okmog
@Tim: WRONG! No, relax, I'm joking ... ;) @all: May I ask you by the way how you like the sound of the diode-ladder filter? I mean do you find it more or less musical than the transistor-cascade e.g. for bass sounds or leads or so? Last question: Does the Doepfer transistor ladde
2010-01-22 by Tim
Hi Mick, > Can someone tell me if my A102 filter is acting correctly - The resonance seems to be set really high. The filter will self oscillate with the resonance set to just 4 (when the cut off is set between 3 and 6). > > Is this normal? Yes, both mine behave similarly - basic
2010-01-22 by okmog
For Sale: A-119 External Input / Envelope Follower 40 EUR + Shipping Ollie
2010-01-22 by achtung_999
I have two of them. They both act like you describe. One is a bit milder. I would be interested to know how to adjust too. Only to match them better. grtz Ernst On Fri, Jan 22, 2010 at 12:40 AM, mickgrit wrote: > > > Hi > > Can someone tell me if my A102 filter is acting correctl
2010-01-21 by mickgrit
Hi Can someone tell me if my A102 filter is acting correctly - The resonance seems to be set really high. The filter will self oscillate with the resonance set to just 4 (when the cut off is set between 3 and 6). Is this normal? As a result of this the range of usable resonance i
2010-01-21 by No Fun
Lloqqqqcryrj
2010-01-20 by liamcloyd
hey rafe, did you ever get your 03b? there was in fact of 03a but alas no more. but who cares with this new doepfer module coming out? if it even has temp comp and the dual outs and double cv ins... i mean this thing is packed. the only change i see was the 3 way switch as you ag
2010-01-19 by rafe127
I agree, this does look like the Modcan 03b (is there also an 03a?) With the 03b, there are switching jacks so that when any individual LFO has it's output in use, that signal is removed from the mix. I think this would be a great feature. The 3-way switch kills the individual ou
2010-01-18 by Bakis Sirros
vu-us is very proud to present their newest release, Interconnected - “Current Flow”.(VU-US018) Interconnected is a collaborative electronica/ idm/ experimental project between Bakis Sirros (of Parallel Worlds, Memory Geist) and Ingo Zobel (of DRON, Signalform, Self Oscillate, Da
2010-01-18 by david.salter@thomsonreuters.com
Stu, Well if arduino is a popular standard that would make a lot of sense. Much as I love the idea of TipTop's Z-DSP, it's expensive for someone who doesn't develop - in case 3rd party programs don't appear. I may change my mind if over the next 12 months there are say 6 drop dea
2010-01-18 by liamcloyd
has anyone commented on the similarity to the old modcan 03b quad lfo? they both look amazing though sadly the modcan is no longer available)!i know the modcan one has a switch which can disable each channel from the mix. i think they were three way switches (1 for two different
2010-01-18 by grimshaw_stuart
i use mac too. the software for the arduino boards - an atmega168 chip - is available for mac, linux and windows. if this idea did go ahead, there could be arguements in favour of keeping it arduino compatible, since there is so much code already out there, and arduino is compati
2010-01-18 by david.salter@thomsonreuters.com
I fall into the second category that Stu mentions. The only other thing I would like to mention is that being an exclusively Mac user I would appreciate a cross platform system for loading programs on to the module. David * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
2010-01-17 by charles kerr
charles babbage memorial analytical engine module That I'd like to see! --- On Sun, 17/1/10, grimshaw_stuart wrote: From: grimshaw_stuart Subject: [Doepfer_a100] Re: doepfer apps To: Doepfer_a100@yahoogroups.com Date: Sunday, 17 January, 2010, 13:15 i think the dsp thing would be
2010-01-17 by dingfutzer
FS/FT: MFB 99 Mixer - new in box - $85 Behringer MDX 4600 Quad Comp/Lmtr - new in box - $55 http://home.ptd.net/~eyesaw/Misc/07.jpg WTB: MakeNoise QMMG, A138b, A160 Buyer pays shipping/ins & online fees - Bill in PA, U.S.A. [Non-text portions of this message have been removed]
2010-01-17 by grimshaw_stuart
i think the dsp thing would be too much, way over my head anyway. anyone with a bit of patience would get a microprocessor, of the basic stamp/atmel64 type, up and running and clocking away happily in a few hours. dsp in assembler language is heavy stuff, and i think the number o