Yahoo Groups archive
Messages
Page 198 of 564 · 28179 messages matched
2009-02-21 by argitoth
> I am NOT talking about the click that happens with a fast envelope > controlling a fast VCA - this is caused by abruptly changing the > volume of a constantly running waveform - which creates a variable > click sound since the wave is suddenly going from zero to whatever > volt
2009-02-21 by mirror_saw7778
Another way to get rid of the "thump" is to use offset. If I patch the output of the A106-6 into my Plan B M14 and use the offset knob, a tiny bit of offset removes the thump sounds. If I look at a recording of the sound witout the offset I can see negative DC offset in the wavef
2009-02-21 by Monroe Eskew
On Sat, Feb 21, 2009 at 12:06 PM, argitoth wrote: > Monroe, you can't tell people what they should think is musical and > non-musical... if I hear an ugly thump and you don't, that means my > ears, musically/metaphorically speaking, are tuned differently than > yours... but my po
2009-02-21 by argitoth
Monroe, you can't tell people what they should think is musical and non-musical... if I hear an ugly thump and you don't, that means my ears, musically/metaphorically speaking, are tuned differently than yours... but my post is a useless one... I'm not trying to accomplish anythi
2009-02-21 by Monroe Eskew
This is what I expected. Some things have inherent slew. The A132 has very fast slew which makes it a flexible device. You can always fix a click or thump by using an EG or slew module as a mentioned above, in a non-sacrificial way. On Sat, Feb 21, 2009 at 10:49 AM, mirror_saw777
2009-02-21 by Monroe Eskew
I don't really hear what the big deal is in your sound demos. The A132-3 demo just sounds more staccato to me. I don't hear anything very annoying. This may be musically desirable. And you can certainly get ride of it with slower envelope time. I don't think this is any kind of f
2009-02-21 by mirror_saw7778
I just now listened to the A132-3 recording provided and did not hear the thump I am experiencing, or anything I would describe as a thump sound, it just sounded like a fast envelope. My "thump" sounds like a analog bass drum, or short bass note always at the same frequency. ---
2009-02-21 by mirror_saw7778
I did some simple patches and found out it is not the 132-3 VCAs making the "thump" it is in fact my new 106-6 filter. Sorry about not being absolutely sure before I posted. I did find some interesting differences between the Asol SY02 and 132-3 which might be of interest to some
2009-02-21 by kdziok1035
Hey everybody! I'm just filling my first modular rack and unfortunately I've already begun hitting a small snag. i bought a used 138-b linear mixer a few months ago and up until about 2 weeks ago it was working like a champ. It began with the output shorting out where I'd have to
2009-02-21 by Sean Williams
This used to happen on my ARP 2600 VCA and was a DC offset problem. Happily there was a straightforward calibration solution accessed with a small screwdriver through a tiny hole in the front panel and explained in detail in the manual. I have a few of the old CEM based A-131 and
2009-02-21 by Derek Holzer
One of the guys at Schneider's Buro in Berlin showed me this particular "feature" on a few Doepfer modules a while back, in particular the VCAs. I believe it has something to do with buffered vs unbuffered inputs, in which case the problem is definitely in the module. If this is
2009-02-21 by Monroe Eskew
I believe this is solely due to your amp. I have experienced this with several devices, including RS180 (ASys), A132-1, A132-3, ASol SY01, and even the RS100 filter, if I just modify the amplitude (or cutoff frequency) with a gate or a fast envelope. Maybe it's just because you a
2009-02-21 by argitoth
mirror_saw7778, you're not alone, take a look at this thread. I even have an audio demo. Let me know if you are hearing the same problem in my audio demo: http://modularsynth.net/viewtopic.php?t=2214&start=0 Monroe, the thump problem lies within the modules. Some modules thump, o
2009-02-21 by mirror_saw7778
I have a pair of 132-3 VCAs and love them except one thing which is making me sad. When I control them with a 143-2 ADSR they make a low "thump" sound. This sound happens regardless of input signal volume or frequency. the sound actually makes nice kicks ;) but makes a mess or my
2009-02-20 by Monroe Eskew
I wonder who's in the market for such a thing. Richard James? Alessandro Cortini? Johnny Greenwood? Wish I had that kind of money... On Wed, Feb 18, 2009 at 2:48 PM, Mark Pulver wrote: > > An easier link... > > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320342224388 > > -
2009-02-20 by peteruertz
ah, i am located in Düsseldorf! Germany --- In Doepfer_a100@yahoogroups.com, "peteruertz" wrote: > > Absolut Mint !! Latest OS !! > > I am sorry, but it has to go! > > for 700,- euro > > Best, peter >
2009-02-20 by peteruertz
Absolut Mint !! Latest OS !! I am sorry, but it has to go! for 700,- euro Best, peter
2009-02-19 by Dennis Verschoor
I think the seller means later ones in the synthi 100. And the Rehberg Synthi 100 is a refurbished one like all Rehberg stuff. Cheers, Dennis On Thu, Feb 19, 2009 at 12:16 PM, zaum wrote: > Sorry, before anyone needs to correct me, yes it is a different one > than the one often o
2009-02-19 by zaum
Sorry, before anyone needs to correct me, yes it is a different one than the one often on Ebay. I was thinking about the one that comes up for sale in the U.S. now and again. Odd to sell the pricing based on UK currency with the pound down these days. But maybe that's the point t
2009-02-19 by zaum
That same synth seems to go up on ebay for the same price maybe a couple times a year for the last couple of years. I would guess ebay is being used as sort of a classified ad. The few that have sold don't sell for anything like that much. Just guessing, but it would make busines
2009-02-18 by Mark Pulver
An easier link... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320342224388 ----- jmaddocks1975 (02:42 PM 2/18/2009) wrote: >Hope you guys don't mind me posting this, sale has nothing to do with >me. Just found on ebay and thought you guys would be interested: > >http://cgi
2009-02-18 by jmaddocks1975
thanks for sorting that, not sure why but my link went crazy :-) John --- In Doepfer_a100@yahoogroups.com, Mark Pulver wrote: > > > An easier link... > > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320342224388 > > ----- > jmaddocks1975 (02:42 PM 2/18/2009) wrote: > >Hope
2009-02-18 by pro2andrius
it includes Doepfer bus and a100 power supply, with fuse and ac outlet perfect condition. 200 euro. located in madrid spain pics http://rapidshare.com/files/199772934/P2150379_WEB.jpg.html http://rapidshare.com/files/199774287/P2150379_WEB.jpg.html
2009-02-18 by jmaddocks1975
Hope you guys don't mind me posting this, sale has nothing to do with me. Just found on ebay and thought you guys would be interested: http://cgi.ebay.co.uk/EMS-SYNTHI-100-modular-analog-AKS-VCS-MOOG-ARP- Roland_W0QQitemZ320342224388QQcmdZViewItemQQptZUK_Musical_Instruments_Pr o_
2009-02-18 by yahoo@doepfer.de
> from my experience, you probably need to replace the dead battery. > > i had similar symptoms (no sampling, and only clicks in the audio > output after sampling and only monitoring the incoming audio > worked fine) and, after the battery replacement, my A112 worked fine. Right.
2009-02-17 by Bakis Sirros
from my experience, you probably need to replace the dead battery. i had similar symptoms (no sampling, and only clicks in the audio output after sampling and only monitoring the incoming audio worked fine) and, after the battery replacement, my A112 worked fine. Bakis Sirros - P
2009-02-17 by vintagesynths123
i bought a few sets of modules but am looking to expand my doepfer system further. if youve got spare modules or systems for sale, please email me directly at minime123 at onebox dot com. im also interested in other newer manufacturers and vintage modules or systems, even if they
2009-02-17 by vintagesynths123
hi. i received a doepfer a112 sampler (wavetable oscillator) module with a broken battery terminal that appears to have broken due to battery corrosion. i just spent quite a while fussing with it and, while its monitoring the input signal ok, im not getting this module to sample.
2009-02-17 by Herman Pearl
> Use it as a CV processor/mangler! Big + on CV from me too! Here are some older demos I made when I first picked one up for anyone who hasn't checked them: http://share.ovi.com/media/SoySos.public/SoySos.10001 http://share.ovi.com/media/SoySos.public/SoySos.10003 http://share.ov
2009-02-17 by Kent Iverson
Use it as a CV processor/mangler! [Non-text portions of this message have been removed]
2009-02-16 by Ken
I bought one the other day. Any particular patches take your fancy? Give me something to play around with while I'm learning how to use it. Ken --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > hi group, > > just wanted to point out how amazing the A189-1 module is! >
2009-02-16 by John V. Talbert
> just wanted to point out how amazing the A189-1 module is! > i recently got two and use them all the time. > > the range of weird effects you can achieve with them is really impressive > and their price is rediculous, taking into consideration what they offer. > > totally recom
2009-02-15 by ysinollaysi
For sale: 1 x A-188-1D BBD Delay 4096 Stages - 130e 2 x A-131 VCA exp. - 50e / pc Or trade to: Doepfer A-141-1 Quad AD Doepfer A-106-6 XP VCF Doepfer A-189-1 Bit Cruncher Doepfer A-100Cxx Cables Analogue Systems RS95 / RS95e VCO Analogue Systems RS500e EMS Filter Analogue Solutio
2009-02-15 by achtung_999
Excuse me. I had not read correctly what you wanted to do. My bad! On Sun, Feb 15, 2009 at 7:24 PM, Monroe Eskew wrote: > Can that be used to plug Doepfer modules into ASys sockets? It looks like > it is a female ASys + female Doepfer, so it could only be used to plug ASys > into
2009-02-15 by Monroe Eskew
Can that be used to plug Doepfer modules into ASys sockets? It looks like it is a female ASys + female Doepfer, so it could only be used to plug ASys into Doepfer sockets, since the ASys sockets in the RS10/15 case are female. On Sun, Feb 15, 2009 at 3:39 AM, achtung_999 wrote: >
2009-02-15 by achtung_999
> (I wonder how many people may have thought Doepfer "should" manufacture a > particular > module, in the abstract, but then not bought it when it came out.) Oh, I had that several times. I thought that it was a nice idea but not for my way of working.
2009-02-15 by E_Karel
--- In Doepfer_a100@yahoogroups.com, "laryn91" wrote: > > The main problem I see with the polls is there is lack of participation. What has struck me is the way the questions are phrased. Maybe instead of "Should Doepfer manufacture X", it should ask a bit more directly, "Would y
2009-02-15 by Bakis Sirros
hi group, just wanted to point out how amazing the A189-1 module is! i recently got two and use them all the time. the range of weird effects you can achieve with them is really impressive and their price is rediculous, taking into consideration what they offer. totally recommend
2009-02-15 by achtung_999
I can highly recommend the Analogue Haven adapter. On Sun, Feb 15, 2009 at 11:39 AM, nicholas_kent wrote: > --- In Doepfer_a100@yahoogroups.com, Monroe Eskew wrote: >> >> There is an adapter made by AS to fit their modules in Doepfer cases. >> It looks like in theory it could be
2009-02-15 by nicholas_kent
--- In Doepfer_a100@yahoogroups.com, Monroe Eskew wrote: > > There is an adapter made by AS to fit their modules in Doepfer cases. > It looks like in theory it could be used for the reverse application, > fitting Doepfer modules to AS power sockets. Can someone verify that > this
2009-02-15 by pro2andrius
130 euro included shipping to EC countries in perfect shape Miguel. Madrid spain
2009-02-15 by Monroe Eskew
There is an adapter made by AS to fit their modules in Doepfer cases. It looks like in theory it could be used for the reverse application, fitting Doepfer modules to AS power sockets. Can someone verify that this works? Thanks, Monroe
2009-02-15 by robert piotrowicz
On 2009-02-13, at 13:58, John V. Talbert wrote: > hello > I do not want to be critical to much but instead of few option of expanding mixers from 138 family > one stereo with more inputs and pan cv would be just top and I think sell okay, theres so many people performing on A100
2009-02-15 by robert piotrowicz
On 2009-02-13, at 13:58, John V. Talbert wrote: > hello > I do not want to be critical to much but instead of few option of expanding mixers from 138 family > one stereo with more inputs and pan cv would be just top and I think sell okay, theres so many people performing on A100
2009-02-14 by Argitoth
How am I supposed to update my list? On Sat, Feb 14, 2009 at 5:18 AM, Bakis Sirros wrote: > please, do not post message about the very same sale every two days. > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist > > [Doepfer_a100] group owner > > www. parallel - w
2009-02-14 by Bakis Sirros
hello, i am upgrading to a bigger case for my live concerts. so, i have for sale two black Doepfer Mini cases (with transformer 230 volts) or i would prefer to trade them for module(s). price is 60% of new (as they are the older 28HP version) and that means: 54 euros each! (so, f
2009-02-14 by Bakis Sirros
please, do not post message about the very same sale every two days. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. my
2009-02-14 by argitoth
Large Sale (Plan B, Doepfer, Asys, Custom) -- at 73% I'm selling most or all of my eurorack modules because I'm moving to a larger format and going to be mostly doing DIY modules. See this thread for audio demos: http://modularsynth.net/viewtopic.php? p=12415#12415 Shipping in th
2009-02-14 by Don Kim
I'm using the DIY Kit#1 to power 3 rows (9u total). Most the modules in that case don't draw a lot of power, and I only have two oscillators in it, I don't hear any noise. On Fri, Feb 13, 2009 at 3:57 PM, intellijel wrote: > I have a G6 case and obviously the current draw of all
2009-02-13 by Monroe Eskew
Does anyone happen to have an extra long power ribbon cable? (By this I mean at least 50% longer than usual.) I need it for the A121 which I think uses 16-pin connectors. I will trade you my normal size one, plus $5 cash included in the shipment for your troubles. Thanks, Monroe