Yahoo Groups archive
Messages
Page 200 of 564 · 28179 messages matched
2009-02-12 by achtung_999
Hey Daan. It is just an idea that someone higher up had. Like I said very premature and Limited edition DIY kits. But I thought I owed it to Dieter to inform him about it. Ernst On Thu, Feb 12, 2009 at 12:36 PM, daan Johan wrote: > > Hi there! > > Since I'm working at the conserv
2009-02-12 by daan Johan
Hi there! Since I'm working at the conservatory, in the sonology department (soldering 2 daysa week, to pay for college) i'd like to say that if there will be modules produced, it will probably be in a very limited amount... (think in amounts for students who own a modular and so
2009-02-12 by achtung_999
Hello Dieter, Nice that this is happening!! Some notes on the side though: I have been investigating further (with quite some help) into the workings of the Tendency Mask Generator. The workings of the calculations you proposed for the Tendency Processor don't act entirely like t
2009-02-11 by peteruertz
http://www.audiotie.com/audio/nikita/a-1491/peteruertz_pm_32.mp3 1x Plan B VCO, Doepfer A-149-1 control with LFOs, Doepfer A-143-1, Doepfer 147 VcLFO, LPG, digit Pitchshifter. Best, peter
2009-02-11 by yahoo@doepfer.de
Thank you for your interest. I'll heat-up the soldering iron. Best wishes Dieter Doepfer > -----Ursprungliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] > Gesendet: Dienstag, 10. Februar 2009 01:15 > An: Doepfer_a100@yahoogroups.com >
2009-02-10 by intellijel
I have the following Doepfer modules available for trade. I am only interested in other Eurorack modules: A-106-5 SEM filter A-109 VC signal processor (VCA+VCF+Panner) A-117 Dig Noise/808 sound source (allows you to make 808 cymbals and cowbells) I like all three but with a stric
2009-02-10 by argitoth
Large Sale (Plan B, Doepfer, Asys, etc.) -- Prices reduced I'm selling most or all of my eurorack modules because I'm moving to a larger format and going to be mostly doing DIY modules. See this thread for audio demos: http://modularsynth.net/viewtopic.php?p=12415#12415 Free Ship
2009-02-10 by chuck j
I've used these parts from Futurlec to make cables. On the other end I think you just want shrouded male IDC headers. 4 GRCABLE16 Grey Ribbon Cable - 16 core 1 GRCABLE10 Grey Ribbon Cable - 10 core 8 IDCC16 16 Contact IDC Socket Connector 8 IDCC10 10 Contact IDC Socket Connector
2009-02-10 by Pieter Volger
Please excuse my spamming.
2009-02-10 by Pieter Volger
Ha... the A-112 is the only one still available! you want it? Pieter jilt@robotfunk.com schrieb: > > hi, is the 112 still available? > I'm potentially interested in others if not, but my main interest is > in the sampler. > > thanks, > Jilt van Moorst (in Amsterdam) > Citeren Pie
2009-02-10 by jilt@robotfunk.com
hi, is the 112 still available? I'm potentially interested in others if not, but my main interest is in the sampler. thanks, Jilt van Moorst (in Amsterdam) Citeren Pieter Volger : > I am selling: > A-112 Sampler, only tested a few times 90,- Euro > these modules are older but not
2009-02-10 by fairlightus
2 racks full withs these modules: 1 A190 midi2cv 3 A110 VCO 1 Analogue Solutions VCO 1 A112 digital sampler/fx 1 A119 Ext in 1 A114 Ringmod 2 A138 lin mixer 4 A140 ADSR 1 A160 Clock divider 1 A161 Clock sequencer 1 A175 voltage inverter 1 A170 Dual Slew limiter 1 A151 Sequential
2009-02-09 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Would you like Doepfer to manufacture a Tendency Processor Module? (such a module would have the advantage that not only a random voltage but any other control voltage (LFO, ADSR and even au
2009-02-09 by Argitoth
that's one good way of looking at it. On Mon, Feb 9, 2009 at 3:54 PM, york luethje wrote: > Weather update: After devastating the islands of Euroland hurricane Argitoth > is poised for landfall around MOTM county by midnight. The president has > declared the area a disaster zone.
2009-02-09 by york luethje
Weather update: After devastating the islands of Euroland hurricane Argitoth is poised for landfall around MOTM county by midnight. The president has declared the area a disaster zone. All residents still residing in the area are required to evacuate immediately. Thank you for yo
2009-02-09 by brian
Looking to have some diy modules with a doepfer system and was wondering if anyone has any p/n for suitable pin headers and ribbon cable for the doepfer disto board? Mouser or Digikey numbers would be best as I am in the states. thanks, b. [Non-text portions of this message have
2009-02-09 by Argitoth
I'm selling most or all of my eurorack modules because I'm moving to a larger format and going to be mostly doing DIY modules. Go here for pricing and availability: http://modularsynth.net/viewtopic.php?t=2243 Free Shipping -I'm willing to bargain lower prices for ordering multip
2009-02-09 by pro2andrius
in good shape, Miguel, Madrid spain
2009-02-09 by argitoth
I'm selling most or all of my eurorack modules because I'm moving to a larger format and going to be mostly doing DIY modules. Go here for pricing and availability: http://modularsynth.net/viewtopic.php?t=2243 Selling entire setup for $2500 (Offer ends February 12). -DIY 12U case
2009-02-09 by Herman Pearl
I haven't posted any music here in a while but there is modular content here: http://share.ovi.com/media/SoySos.public/SoySos.10045 Soy Sos remix of 3 Generations Walking - "Feed I" featuring Christiane D on vocals 3 Generations Walking self titled release (2000) Special guest Re
2009-02-08 by James Husted
I just hooked a copy of the Nord G2 demo program up to my MOTU 828 Mk1 and fed it's outs to my Doepfer modular. I made a simple patch with a LFO, Sequencer, amp module, and output module. The Demo is limited to two output channels so I fed the Sequencer CV out one channel (throug
2009-02-08 by Pieter Volger
I am selling: A-112 Sampler, only tested a few times 90,- Euro these modules are older but not used very much; they are fully functional and in mitn condition A-116 Waveform Processor 25,- Euro 2 x A-115 AUdio Divider each 20,- Euro 2 x A-130 Linear VCA (older series) each 39,- E
2009-02-08 by Chidra_100@iinet.net.au
After the delight of the new yellow (15) Doepfer cables being available; thought it was about time i asked about uv responsive 3.5mm patch cables or any product/cable that is uv responsive available anywhere? (global question) I do this every month or so with no success... :) I c
2009-02-08 by Laurie Biddulph
Hi Danjel, The weight and costs of the individual racks is listed below. > 3U 160mm @ 1.25kg > 3U 220mm @ 1.35kg > 6U 160mm @ 2.5kg > 6U 220mm @ 2.70kg These weights have been rounded up a bit so adding units may result in a lower figure than initially calculated although we also
2009-02-06 by joshualiburdi
Looking to trade both specifically for a QMMG, or separately for other modules (contact me with offers). Otherwise, looking to sell the M13 for $230 and the M24 for $250. I cover priority shipping for both if you are in the USA. Email at liburdi [dot] joshua [at] gmail [dot] com
2009-02-06 by Silas Johansen
No experience with returning stuff for repairs, but I bought an A-155 sequencer from them some time ago. It arrived with a slightly bent pot in row one, and the knob on that pot had marks that made it look like the unit had gone through an impact. This was hardly surprising given
2009-02-05 by rwert@poczta.onet.pl
hello here is again: A110 VCO - 90 euro A122 VCF - 55 euro + shiping from EU paypal available please contact me on: rwert@poczta.onet.pl thanks and all the best r [Non-text portions of this message have been removed]
2009-02-05 by yahoo@doepfer.de
Dear Bakis, I have added a link to our website. For your information: I'm not in the office from tomorrow (Feb 06) until next Wednesday (Feb 11). Just in case that someone is wondering why I do not respond to questions. Best wishes Dieter > -----Ursprungliche Nachricht----- > Von
2009-02-05 by yahoo@doepfer.de
> > If you want to assemble a template of your system it's much > easier to use > > the front panel files from our website and print the complete > template than > > to use the single patch sheets of all modules and cut/paste them with > > scissors nad glue. > If I would want to
2009-02-05 by Florian Anwander
Hi > If you want to assemble a template of your system it's much easier to use > the front panel files from our website and print the complete template than > to use the single patch sheets of all modules and cut/paste them with > scissors nad glue. If I would want to edit graphi
2009-02-05 by yahoo@doepfer.de
> My 143-1 module just arrived and, as I've done with the rest of my > system, once it got here I went to the manufacturer's page and printed > up its manual. I keep them in a binder within arm's reach. I'm new at > this. It's handy. > > In any event, I just downloaded Doepfer's
2009-02-05 by speerpeter
Good to know-- thanks Dieter! --- In Doepfer_a100@yahoogroups.com, wrote: > > > My 143-1 module just arrived and, as I've done with the rest of my > > system, once it got here I went to the manufacturer's page and printed > > up its manual. I keep them in a binder within arm's re
2009-02-05 by speerpeter
My 143-1 module just arrived and, as I've done with the rest of my system, once it got here I went to the manufacturer's page and printed up its manual. I keep them in a binder within arm's reach. I'm new at this. It's handy. In any event, I just downloaded Doepfer's manual for t
2009-02-05 by Bakis Sirros
Audio Clips Here: http://www.din.org.uk/news.html DiN32 - Shade by Parallel Worlds Release date 23rd March 2009 thanks, best regards, :-) Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. mysp
2009-02-05 by Florian Anwander
Hello > 1) Is the A-190/AD5 combination supposed to send gate and CV > information to both rails, or just the one they are attached to? Just to the one it is attached to. > 2) If the AD5 was dead, would that result in a totally inoperative A-190? Yes > 3) If the A-190 were dead,
2009-02-05 by madrayken
Thanks, folks. --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hello > > > 1) Is the A-190/AD5 combination supposed to send gate and CV > > information to both rails, or just the one they are attached to? > Just to the one it is attached to. > > > 2) If the AD5 w
2009-02-05 by madrayken
One further wrinkle - and please forgive me for my ignorance here. I can't get the A-190 to do anything at all - i.e. even the menu's are inoperative. My A-190, AD5 and oscillators normally live on my top rail, so I the, to the lower rail. The same problem occured - but only if I
2009-02-04 by Derek Holzer
My simple advice is to get a multimeter and learn how to use it. Check for shorts between your power rails, and maybe take your problem A-190 and the 5V regulator out of the case and check for shorts between the power pins there as well. If all this is too much to figure out on y
2009-02-04 by madrayken
After the Monday-of-doom, I replaced my fuse, plugged in my modules. They seem to work... with one exception. When I plugged in the A-190, my two oscillators produced nothing but weird, very low-level ring-mod-y noise. I tried plugging in the A-190, *without* the AD5 - same probl
2009-02-04 by henfieldj
Dieter, Thank you for looking into the USA power supply matter and getting some resolution! Your swift response to this issue helps renew my faith in Doepfer, and hopefully will solve the issues that have been reported in various forums with both DIY kits. Thank you again, Henfie
2009-02-04 by yahoo@doepfer.de
I got an answer from Shawn Cleary from Analogue Haven concerning the transformers and power supplies for A-100 DIY#1 and #2. So far they found only a suitable transformer with 1100mA for A-100DIY#1. That's why the A-100DIY#1 in USA were delivered with an 1100mA transformer only.
2009-02-04 by yahoo@doepfer.de
> Hi list, > > After all this talk of which power inlet is good/bad etc., I decided to > take a few snaps of the one in the second-hand case I had to replace, > and made a page for it at my website: > > http://www.timstinchcombe.co.uk/synth/iec_mod/iec.html > > Also there is the
2009-02-04 by yahoo@doepfer.de
> You could always use the left over switch as a Ground Lift switch. > Might as well put it to use. > -James Please don't do that! Due to electrical safety reasons this is not allowed because the housing is no longer earthed in this case ! If one of the mains leading cables becom
2009-02-04 by Monroe Eskew
Not modules, but useful accessories: - Item #250368042003 - Bartoc Chromatic Tuner and Metronome http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250368042003 - Item #250368045542 - 15-Range Pocket Digital Multimeter by Radioshack http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&i
2009-02-03 by James Husted
Tim - You could always use the left over switch as a Ground Lift switch. Might as well put it to use. -James On Feb 3, 2009, at 5:46 AM, Tim Stinchcombe wrote: > Hi list, > > After all this talk of which power inlet is good/bad etc., I decided > to > take a few snaps of the one i
2009-02-03 by achtung_999
Thanks for clearing this up! I now know I am safe. I three of the cases I own, I bought second hand so I was dying to find out. It was all good. Ernst On Tue, Feb 3, 2009 at 6:58 PM, Sean Williams wrote: > ... and here's what one of mine looked like after the event: > > http://mo
2009-02-03 by Julian
>>...crack the metal can, cut/lever away the plastic/goo and remains of the filter, until all that's left are the metal connectors, >>then simply resolder the mains wires to these terminals. Id just like to add weight to Sean's comments, as thats how ive fixed a couple of old G6s
2009-02-03 by Sean Williams
... and here's what one of mine looked like after the event: http://monosynthorchestra.com/images/doepfer_meltdown.jpg I'd be surprised if there were many left now that haven't failed, but if it happens to you, an even cheaper way around it is to crack the metal can, cut/lever aw
2009-02-03 by dr_synthatron
I think the trouble with getting 400mA fuses is that they just keep blowing which is why I got 500mA ones. I think it was Dieter who said it was OK to use higher rated fuses. --- In Doepfer_a100@yahoogroups.com, "madrayken" wrote: > > Gotcha. Yup - mine's the big torus of coiled
2009-02-03 by Tim Stinchcombe
Hi list, After all this talk of which power inlet is good/bad etc., I decided to take a few snaps of the one in the second-hand case I had to replace, and made a page for it at my website: http://www.timstinchcombe.co.uk/synth/iec_mod/iec.html Also there is the part no. of a sugg