Yahoo Groups archive
Messages
Page 225 of 564 · 28179 messages matched
2008-11-01 by Florian Anwander
Hi Bakis > ok, idea noted. this will be yet another poll. > one poll for a vc sampler for audio, one for a vc sampler for dc(cv/gates) and one for a more generic module like the one that you describe in this email. I am not realy sure about how a sampler should be done like. I pe
2008-11-01 by achtung_999
That is almost the newprice??http://www.thomann.de/nl/mfb_modul_osc01.htm On Sat, Nov 1, 2008 at 4:19 PM, pro2andrius wrote: > in perfect condition, 150 eur including worldwide shipping > > Miguel. Madrid spain > > > [Non-text portions of this message have been removed]
2008-11-01 by Florian Anwander
Hi Christophe > I'd like to have the module to record and play at the same time, so, > having one gate for record and another for play. > [...] > This would > require one extra feature: a cross fade between the old and new > sample-play position. > [...] > Same type of crossfade
2008-11-01 by achtung_999
Hello, In my list of wishes I have one old wish that is still there, that was already a poll once: http://launch.groups.yahoo.com/group/Doepfer_a100/surveys?id=12050590 "the Tendency mask generator at Sonology is a device which you feed an upper limit and a lower limit as cv inpu
2008-11-01 by pro2andrius
in perfect condition, 150 eur including worldwide shipping Miguel. Madrid spain
2008-11-01 by Korhan Erel
Hi Bakis, Apologies if that's already been discussed. I am a bit behind the mass of emails on this subject and may have missed it. I am glad that someone else has already suggested it. Korhan On 01.Kas.2008, at 10:22, Bakis Sirros wrote: > isn't that the same with the proposed (U
2008-11-01 by Bakis Sirros
ok, idea #2 noted. there was a poll about such an advanced envelope module in the past, but i'll create one again. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic
2008-11-01 by gribus88
1- @ Silence module.Most of you are kidding. But it is sometimes worthwhile or confronting to just stop the automated music for a period, or a part. (you can always switch it back on !). The knob could be a fader, and a normal switch and a momentary switch could be useful. Not fo
2008-11-01 by Bakis Sirros
isn't that the same with the proposed (USB) OSC to cv/gate module? Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. mysp
2008-11-01 by Korhan Erel
Hi there! While I was reading all these messages on future modules and interaction with computers, an idea sprung up in my mind: a hardware box of, let's say 16 CV generators, that connects to a computer thru USB, that runs a software for sequencing those CV outputs. The sequence
2008-10-31 by Bakis Sirros
ok, idea noted. ;-) Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk www. mu
2008-10-31 by Frequency Divider
not to be confused with the 'just passing through' filter Brandon Daniel schreef: > > > On Fri, Oct 31, 2008 at 12:38 PM, tkrakowiak > wrote: > > ok. how about a silence module. one out and a volume knob to control > > an amount of calmness? > > Also doubles as a no-pass filter!
2008-10-31 by daad_noise
Two killer new records from snapped in half, and we couldn't have hoped for a better release date for these two spooky offerings: Total System Point Never - Power In That Which Compels You cdr Total System Point Never is Daniel Lopatin of Oneohtrix Point Never / Astronaut / Infin
2008-10-31 by Brandon Daniel
On Fri, Oct 31, 2008 at 12:38 PM, tkrakowiak wrote: > ok. how about a silence module. one out and a volume knob to control > an amount of calmness? Also doubles as a no-pass filter! -Brandon
2008-10-31 by tkrakowiak
ok. how about a silence module. one out and a volume knob to control an amount of calmness? t
2008-10-31 by Monroe Eskew
What did you make the glissando melody with? Sounds like French Connection, two VCO, two VCA, LPF. On Oct 30, 2008, at 9:13 PM, Maxime wrote: > Hi, > This is my last video, featuring Doepfer A100 system. > I wanted to make a sound installation using that absinth see saw > brouill
2008-10-31 by Argitoth
youtube sucks, use vimeo: http://vimeo.com/ On Thu, Oct 30, 2008 at 9:13 PM, Maxime wrote: > Hi, > This is my last video, featuring Doepfer A100 system. > I wanted to make a sound installation using that absinth see saw > brouilleur device because I love the randomness of it ! >
2008-10-31 by Maxime
Thanks, I'll upload it there. Found a way to get stereo on youtube by the way... http://fr.youtube.com/watch?v=DAlct4GSH1I&fmt=18 That's the new link. --- In Doepfer_a100@yahoogroups.com, Argitoth wrote: > > youtube sucks, use vimeo: http://vimeo.com/ > > On Thu, Oct 30, 2008 at
2008-10-31 by Maxime
Hi, This is my last video, featuring Doepfer A100 system. I wanted to make a sound installation using that absinth see saw brouilleur device because I love the randomness of it ! The video features my home made robot cabinet with CV lights and scope screen, using mfb videoscope.
2008-10-31 by achtung_999
I like the idea of that Quad VC-LFO Dieter!!!Any idea when this will be available? * holds back buying the MFB dual vc-lfo * On Thu, Oct 30, 2008 at 10:09 AM, Bakis Sirros wrote: > ok, so'll keep in mind idea #3b for a poll. the others are probably > covered... > > Bakis Sirros -
2008-10-30 by Don Kim
I still like the OSC 2 CV module idea, it's more open ended, the way a modular system should be. :)
2008-10-30 by Christophe Stoelinga
That makes sense. I think you can have mapped zones by using a comparator (A-167) on the output of the position CV's. (Well, I think, I don't have the A-167). I like the mouse/touchpad over the joystick because the mouse sits horizontal on the tabletop verses the joystick that is
2008-10-30 by James Husted
I thought of the other options available with other controllers and the problem lies in special drivers needed to implement non-standard non-mouse functions. I would love a Wacom tablet controller (with mapped zones and pressure etc) but that would require a more sophisticated mo
2008-10-30 by Christophe Stoelinga
Could I suggest a 4th version of the USB Mouse module? It would be like the 3rd, but some of those controllers (wacom pad and some touch pads) are pressure sensitive. That would be great to have on CV too. Another extra feature that would sound cool to me is a switch that switche
2008-10-30 by dkimcg
I blew my power transformer (the wallwart part) in the dual buss DIY kit and I was wondering what the proper specs are to look for in a new wallwart/transformer. 15v, 1500ma? Regulated or not? Anything else I should be aware of? -D
2008-10-30 by James Husted
I have just posted 3 ideas for a USB Mouse module to the photo section on the newsgroup site. http://launch.ph.groups.yahoo.com/group/Doepfer_a100/photos/browse/8b4d All versions have CV outs for left/right, Forward/back and wheel Up/ down. I see this as a bipolar voltage that ac
2008-10-30 by ilanode
--- In Doepfer_a100@yahoogroups.com, James Husted wrote: > > I have just posted 3 ideas for a USB Mouse module to the photo > section on the newsgroup site. > > http://launch.ph.groups.yahoo.com/group/Doepfer_a100/photos/browse/8b4d Great! Especially the full featured one! Rgds,
2008-10-30 by Don Kim
Awesome! I will definately pick it up if it can record LFOs and slow envelopes as well as audio, I'm more interested in the CV side, there's other samplers out there, but a high quality CV/waveform recorder playback device, like a recordable Miniwave, would be perfection. Like Hi
2008-10-30 by Christophe Stoelinga
I think such a module would be very interesting! See my comments below on what I'd like to see in such a module. Christophe >> gate to select play or record >This record setting should be an pre-enable setting; the real write >setting should be done by the start signal. I'd like
2008-10-30 by Bakis Sirros
ok, noted. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk www. musicamaxim
2008-10-30 by Bakis Sirros
so, should i not make a poll for a dc-coupled version of the proposed vc samper module by florian? or? Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace
2008-10-30 by Bakis Sirros
so, the cheap solution would be the base module plus the basic sampler add-on module and the more expensive solution would be the base module plus the full-featured audio or cv recorder add-on module, right? Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_
2008-10-30 by Bakis Sirros
no problem. just tell me what the 'slimmer version' should have. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspac
2008-10-30 by Bakis Sirros
ok, great. poll on the way for this too. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www.
2008-10-30 by Bakis Sirros
ok, idea noted. this will be yet another poll. one poll for a vc sampler for audio, one for a vc sampler for dc(cv/gates) and one for a more generic module like the one that you describe in this email. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100]
2008-10-30 by yahoo@doepfer.de
> just for the record: i think that in the past there has been talk > already about a digital delay that would be capable of delaying gate and > cv. i still think that would be a very nice thing to have > > greetings, anton The planned digital delay/sampler module will be DC coup
2008-10-30 by astroschnautzer
ok, Ill try to come up with some info... --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > hi wille, > > ok, but, please, tell me some specific features to include in the poll, when i create it. > > thanks, > bakis. > > > > Bakis Sirros - Parallel Worlds / Interconnect
2008-10-30 by omegaattraktor
i would really like to see a drum module that can do bassdrums, snares and hihats similar to the nord modular drum module. for synthesizing drum sounds i need a large amount of modules but i don't use all the features of the modules (e.g. decay envelopes are sufficient). the modu
2008-10-30 by Frequency Divider
just for the record: i think that in the past there has been talk already about a digital delay that would be capable of delaying gate and cv. i still think that would be a very nice thing to have greetings, anton
2008-10-30 by Florian Anwander
Hi Stu > i'm personally not a fan of leaving running, looping, one-shotting and > stopping to the sampler, i think gating it continuously allows more > control. If you want to do wavetable like stuff, you need a loop in the release-phase of an ADSR.envelope. If you do drummachine
2008-10-30 by Sean Williams
Sorry, more details: A Dual/Stereo Parametric Equaliser 2 audio inputs, 2 audio outputs +/- 15dB Gain, CV controlled +/- 5V Q/bandwidth, CV controlled Centre Frequency 20-20KHz, CV controlled. A Switch to route all CV controls for the first EQ section to be normalled to control t
2008-10-30 by Florian Anwander
Hi Bakis > that sounds great. > so, i guess these will be the feauters of an advanced vc sampler/wavetable module. ok? Maybe. Another idea (based on the original Doepfer SoundSampleSystem from 1984): Make one base module with - signal A/D-in (on the frontplate) - signal D/A-out (
2008-10-30 by Stu Grimshaw
hi florian, bakis, > > gate (not trigger) for play/record > replace this by: > gate(+switch) for run/stop > gate(+switch) to select between single shot / loop mode > gate(+switch) to switch from gated mode to so called "release-mode" (if > in single shot, the sample should be pla
2008-10-30 by Bakis Sirros
that sounds great. so, i guess these will be the feauters of an advanced vc sampler/wavetable module. ok? Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. mysp
2008-10-30 by Florian Anwander
Hi Stu I have some addon features for this: > 8/16 (maybe also 24?) bit sampling > gate (not trigger) for play/record replace this by: gate(+switch) for run/stop gate(+switch) to select between single shot / loop mode gate(+switch) to switch from gated mode to so called "release-
2008-10-30 by Bakis Sirros
hi wille, ok, but, please, tell me some specific features to include in the poll, when i create it. thanks, bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic
2008-10-30 by astroschnautzer
Hmmm... I have to think abit because I don`t remember exactly what features the reaktor samplers had, I used it just abit when it changed from generator to reaktor and then I played aroud with the demo version awhile ago. All I remember is that is was awesome to play with the sam
2008-10-30 by Bakis Sirros
ok, so'll keep in mind idea #3b for a poll. the others are probably covered... Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmus
2008-10-30 by Bakis Sirros
with what proposed features? Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. u
2008-10-30 by Stu Grimshaw
top of my list would be a bright new sampler: 8/16 (maybe also 24?) bit sampling gate (not trigger) for play/record gate to select play or record cv input for sample rate cv input to scan through sample separate audio outs for monitoring (which i don't need in my patches) and pla