Yahoo Groups archive
Messages
Page 253 of 564 · 28179 messages matched
2008-05-12 by Tim Stinchcombe
> http://search.retrosynth.com/synth-diy/search/lookit.cgi?-v0805.169 Dammit! Don't you just hate being thwarted by technology? There's something 'dynamic' I don't understand about that link that gives 'internal server error' (well it does for me!), but if you then back arrow out
2008-05-12 by Tim Stinchcombe
Hi Dieter, > MM5837 data sheet (digital noise source) > Digital Noise Generator of the Formant Synthesizer (Book Elektor Verlag, > ISBN 3-921608-19-8, 1981, pages 24-25) > Digital Noise Generator published in the magazine Elektor about 1978/1979 Thanks for those pointers - I foun
2008-05-12 by Doug
bigcitymusic offers good patchcords in many lengths and colors. My used A-100 came with a few gray, thin patchcords that have intermittent connectivity problems. The ones from bigcitymusic are fine. For immediate gratification, you can find patch cords (I think they're 18") at Ra
2008-05-12 by Bakis Sirros
hello, in fine working and cosmetic condition: Analogue Systems RS-Integrator RS210 Fixed Filterbank module: 126 USD. (70% of new price) ( reason for sale: i have two of them in my AS modular and have to make room...) screws and cable included. paypal payment only (email me first
2008-05-12 by aybee2004
Hi all, I've finally entered the world of modulars. I got a good Doepfer setup from ebay last week and it's been great fun so far :-) I don't know how the unit has been stored - or if this is just a problem with 3.5mm jacks - but I have a few intermittent connections and so I'd l
2008-05-12 by Bakis Sirros
hi List, all modules in fine working and cosmetic condition: (you all have seen pics of my modular, right?) price is 70% of new price: A116 VC WAVEFORM PROCESSOR : 63USD A122 24db LOWPASS vcf3 : 80USD A123 24 db HIGHPASS vcf4 : 101USD A170 Dual Slew LIMITER : 56USD (screws and ri
2008-05-11 by Denis Gökdag
I think the output level of the a-111 is just a little too low for all waveforms to be able to sync another osc. also the impedance on the pulse wave seems to be slightly non-standard. On 11. May 2008, at 8:00 AM, beakanddune wrote: > Hi, > > I've been messing around with the syn
2008-05-11 by jalmari3
OK. I noticed that the MESI price for French Connection is not exactly a bargain: Price at Analogue Systems is only 1250 UK pounds including 17.5% VAT. Also, Euro is quite strong at the moment. My new price is Euro 1100 plus shipping! --- In Doepfer_a100@yahoogroups.com, "jalmari
2008-05-11 by beakanddune
Hi, I've been messing around with the sync of my A-110 and A-111 oscillators and have noticed something odd. If my A-111 is master then the A-110 will only track the square/pulse waveform of the A-111 (other waveforms don't do anything). If however the A-110 is master then the A-
2008-05-10 by dingfutzer
Doepfer A112 Sampler/Wavetable - $169, A113 Subharmonic Generator - $195, A107 Morphing VCF - $295. With ribbon cables and screws. Belton Reverb tank for A199 - $25 All are in excellent condition - Buyer pays shipping - Will trade towards Harvestman Sefari or Plan B Model 28 Tap
2008-05-09 by jeswa
Email sent... --- In Doepfer_a100@yahoogroups.com, David Bulog wrote: > > To clarify 1 x A-154 and 1 x A-155 (not two) > I have received several emails asking > price reduced to USD $515 plus shipping > > On 3/05/2008, at 10:12 PM, David Bulog wrote: > > > For Sale > > Doepfer A-
2008-05-09 by jeswa
Email sent... --- In Doepfer_a100@yahoogroups.com, Anthony Rolando wrote: > > > Last try to get a trade for some of these: > > Doepfer: A-156 quantizer, A145 LFO, > > Banalogue: WVX Serge Waveshaper > > Blacet: Improbability Drive (modded for audio signal processing and quantizer
2008-05-08 by hardware@doepfer.de
> Hi Silas, > > Well three of us have arrived at that figure independently, so I'm > reasonably confident it is good. I have now also checked it against > the 19-stage linear FSR equivalent, and that agrees too. Since I *do* > have the polynomial for the 19-stage sequence, I'm wo
2008-05-07 by Tim Stinchcombe
Hi Silas, Well three of us have arrived at that figure independently, so I'm reasonably confident it is good. I have now also checked it against the 19-stage linear FSR equivalent, and that agrees too. Since I *do* have the polynomial for the 19-stage sequence, I'm working on how
2008-05-07 by Bakis Sirros
hi all, a new great "Obsessive Surrealism" cd album review here: http://www.tokafi.com/newsitems/cd-feature-parallel-worlds-obsessive-surrealism/ thanks, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - musi
2008-05-07 by Silas Johansen
Tim, I'd be willing to bet you a patch-cord that those minus 4 comes from a miscalculation somewhere. It would be a lot easier to designing an algorithm or a circuit with a cycle length of 2^18 straight than 2^18-4 as for the latter you would need to reset the bit pattern at a sp
2008-05-06 by Tim Stinchcombe
> I'm now pretty sure the sequence is at least 2^19 = 524288 long, so at > 1kHz (approx knob setting 4), it will take nearly 9 minutes to repeat. With a little computational help from the kind people on the Synth DIY list, and some cajoling to get me to run some calcs myself, I c
2008-05-06 by David Bulog
I have for sale 1 x Roland 191j chassis --mint condition USD $399 + shipping email me off list if interested Wanted to buy: Polyvoks VCF Eurorack formatt thanks David
2008-05-06 by Anthony Rolando
Ross, I have purchased the Small Bear Davies Clones and I can confirm that they will fit on the Doepfer potentiometers. They have a set screw. The are nice knobs. Tony > To: Doepfer_a100@yahoogroups.com > From: amnesia@internode.on.net > Date: Tue, 6 May 2008 03:55:16 +0000 > Sub
2008-05-06 by cray5656
i put up 2 of phils serge knob modular pics in photo section.. if you are here phil hope you dont mind...thaey just look so cool
2008-05-06 by cray5656
hi all my pal Phil has sent me a photo of his euro/ doepfer/ plan b etc modular with the serge style knobs and they look great. I own a serge but I am sure , but not 100% positive that the serge knobs doent fit the doepfer pot, so maybe this below is made for doepfer pots? http:/
2008-05-06 by Hans Greuber
Hi , I have a 6 U case for 200 euros,never racked. Spain thanks! ________________________________ > To: Doepfer_a100@yahoogroups.com > From: parkavenuemusic@yahoo.com > Date: Tue, 6 May 2008 00:43:38 +0000 > Subject: [Doepfer_a100] WTB case > > > Hello, I just bought some modules
2008-05-05 by parkavenuemusic
Hello, I just bought some modules but I have no case. if anyone has one they want to sell me let me know. I didn't really want anything huge. I am in northern california. thanks! wes
2008-05-05 by ysinollaysi
Hi! I'm looking for some modules to fill up my rack: Doepfer: A-102 Diode LPF A-105 SSM 24db LPF A-106-1 Xtreme MS20 LPF/HPF A-106-5 12db SEM filter A-124 12db WASP filter 1 or 2 A-110 VCO 1 or 2 A-145 LFO 1 A-176 Manual CV source A-100AD5 +5V adapter Other VCF: The Harvestman Po
2008-05-05 by hpsounds_fr
Hi, Here is the last list of modules and others stuffs I sell: - 1 x Doepfer A-122 24db LP VCF - 1 x 55 Euros - 1 x Doepfer A-131 exp VCA - 1 x 45 Euros - 1 x Doepfer A-136 Distortion/Waveshaper - 1 x 40 Euros - 1 x Doepfer G6 rack - 1 x 300 Euros - 2 x Bespeco rack 6U - 2 x 50 E
2008-05-05 by Eyesaw
Thanks Dieter, Bill ----- Original Message ----- From: hardware@doepfer.de To: Doepfer_a100@yahoogroups.com Sent: Monday, May 05, 2008 12:42 PM Subject: AW: [Doepfer_a100] Tigger To Gate Circuit > Dieter - We spoke before on this issue. I may have improperly set > the A162 but as
2008-05-05 by hardware@doepfer.de
> Dieter - We spoke before on this issue. I may have improperly set > the A162 but as I remember even at the shortest of delay lengths > it produced too wide a pulse. > > Someone out there please test the 162 to see if it can properly > trigger a gate input on say a 140 ADSR - >
2008-05-05 by Eyesaw
Dieter - We spoke before on this issue. I may have improperly set the A162 but as I remember even at the shortest of delay lengths it produced too wide a pulse. Someone out there please test the 162 to see if it can properly trigger a gate input on say a 140 ADSR - Thanks, Bill -
2008-05-05 by hardware@doepfer.de
> Hello - I have a need for a circuit to convert triggers to gates. > I have found the Doepfer Trigger Delay created to wide a pulse. > Wondering if others need this process and if anyone knows a > circuit to address the issue. > > Thanks - > > Bill Actually it's not possible to
2008-05-05 by Eyesaw
Hello - I have a need for a circuit to convert triggers to gates. I have found the Doepfer Trigger Delay created to wide a pulse. Wondering if others need this process and if anyone knows a circuit to address the issue. Thanks - Bill ----- Original Message ----- From: hardware@do
2008-05-05 by henfieldj
I know that Doepfer has the A-190 MIDI to CV module, which has 2 CV outs. Is there any way to take a MIDI signal that has note information on multiple channels and then have multiple note CV outs to control various oscillators? The reason that I am asking, is I have been looking
2008-05-05 by hardware@doepfer.de
> > Do you mean, that the *knob* settings of A-149-1 affect A-149-2? > > > > Jari Jokinen > > In any case the clock of the A-149-1 QRV section affects the A-149-2. I'm > not sure if the QRV knob setting and CV affects the A-149-2 too. This > depends if the A-149-2 are "pre" or "p
2008-05-05 by pfichoux
A142 and A162 would do it. I'll try a clock divider as well cause I don't have those modules (first trigger : gate open / second trigger : gate close). Best, Pierre --- In Doepfer_a100@yahoogroups.com, "Eyesaw" wrote: > > Hello - I have a need for a circuit to convert triggers to
2008-05-05 by Anthony Rolando
Yes, Yes, I apologize for such a silly question. I should have looked more closely at the panel! Or better yet the manual. Tim's analysis of the sequence is very helpful. I am trying to find something SIMILAR to the Noise source of my SN-Voice (which I built as a FRAC module). I
2008-05-05 by hardware@doepfer.de
> Do you mean, that the *knob* settings of A-149-1 affect A-149-2? > > Jari Jokinen In any case the clock of the A-149-1 QRV section affects the A-149-2. I'm not sure if the QRV knob setting and CV affects the A-149-2 too. This depends if the A-149-2 are "pre" or "post" the gatin
2008-05-05 by hardware@doepfer.de
> What is the A-117 CV response like? Is it vaguely exponential? linear? The A-117 has no CV input ! > Is this a Shift register based noise circuit where the CLOCK is under VC? No, you only have a clock input and can use e.g. a VCO or HSVCO (e.g. from one of the BBD modules) as V
2008-05-05 by partlydrone
How about this, instead of going at the 112 panel, just buy a blank 4hp pane and put the mod into that, install the panel next to the 112. If you are feeling confident put a mult in the panel too! brilliant idea, will do that. i need to buy a mult anyway for another project, will
2008-05-05 by Tim Stinchcombe
> > Any idea how long is this sequence? Can you notice it repeat when > using high frequency clocks? > > Alas it is some years since > I studied such things, as otherwise I could probably have worked out > the appropriate polynomial and *told* you how long the sequence is...! Wel
2008-05-05 by hardware@doepfer.de
> -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von jalmari3 > Gesendet: Dienstag, 29. April 2008 21:18 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a100] Re: A-149-2 > > > Do you mean, that the *
2008-05-04 by bellenger_a
I did made holes in the A199 reverb to put RCA out and also add switch for CV1 on A110... and I'm not such of a DIY guy... I just used a dremel like machine, the one that was there my father kept and used for everything in the house for years... I did block the panel in a drill t
2008-05-04 by Silas Johansen
And I believe you can still get 4hp panels with 8 holes punched in them... On Sun, May 4, 2008 at 9:10 PM, Anthony Rolando wrote: > > > > > > > > How about this, instead of going at the 112 panel, just buy a blank 4hp > panel and put the mod into that, install the panel next to t
2008-05-04 by Anthony Rolando
How about this, instead of going at the 112 panel, just buy a blank 4hp panel and put the mod into that, install the panel next to the 112. If you are feeling confident put a mult in the panel too! TOny > To: Doepfer_a100@yahoogroups.com > From: partlydrone@yahoo.com > Date: Sun,
2008-05-04 by partlydrone
i mean this really unfacetiously: i find it inspiring that there are people out there who are so capable and diligent. i just want to get a hole through with the minimum of fuss, even if it looks a mess, my whole life is a botch. if i go at it with a dremmel, will i basically get
2008-05-04 by Anthony Rolando
If I were adding a switch to a doepfer module I would remove all electronics and center punch the BACK of the panel before I drilled. I would run my machine at about 3 or 4 thousand RPM. I would use a stepped drill and deburr after making the hole. I would drill the into BACK of
2008-05-04 by partlydrone
Just before I dive in, does anyone have advice or experience of drilling through doepfer module faceplates? I want to put an extra switch across jumper J1 of my a112 to switch the LP filter in and out (I quite like digital artefacts). Should I go through the palaver of removing a
2008-05-04 by Bakis Sirros
all the best with the Gigs, Gino! sadly i am quite far... --- ginorobair wrote: > Hey gang, > A gig note: I'm playing a couple of shows this week > with German tubaist Carl Ludwig > Hübsch, whose playing sounds electronic a lot of the > time. I'll have my A-100P with me, > as wel
2008-05-04 by Tim Stinchcombe
Hi Tony, > Any idea how long is this sequence? Can you notice it repeat when using high frequency clocks? Personally, no I can't, at least it is not obvious to me in the way that some sequences I've heard are. At high clock rates (say knob setting below about 3, so above a couple
2008-05-04 by ginorobair
Hey gang, A gig note: I'm playing a couple of shows this week with German tubaist Carl Ludwig Hübsch, whose playing sounds electronic a lot of the time. I'll have my A-100P with me, as well as bowed cymbals, ebow piano, etc. If you're near one of these venues, please stop by and
2008-05-03 by Anthony Rolando
Thanx Tim, I should have looked more closely! Pretty obvious there is no CV but rather an ext. clock input. Any idea how long is this sequence? Can you notice it repeat when using high frequency clocks? Thanx dude, tony > To: Doepfer_a100@yahoogroups.com > From: timothy@tstinchco
2008-05-03 by David Bulog
To clarify 1 x A-154 and 1 x A-155 (not two) I have received several emails asking price reduced to USD $515 plus shipping On 3/05/2008, at 10:12 PM, David Bulog wrote: > For Sale > Doepfer A-154 Enhanced Sequential Controller, A-155 A-155 Analog/ > Trigger Sequencer both purchas