Yahoo Groups archive
Messages
Page 252 of 564 · 28179 messages matched
2008-05-20 by Bryan E Cornell
Hmm. Maybe it was a peculiarity of the particular patch I was using. I'll investigate further. Bryan >>> 05/20/08 2:59 AM >>> > I noticed yesterday that when the my Velleman oscilloscope is on, > it adds a high-pictched frequency to the audio signal. Is there a > way to wire an o
2008-05-20 by aybee2004
Thanks Silas and Dieter for the information. One of the racks in my system is from 1999 apparently, so it looks like I have some hours of fun ahead of me as curl all the jack contacts on the modules... Can anyone recommend a pin-for-pin replacement jack socket? It may be quicker
2008-05-20 by David Salter
Thank you Dieter Rgds david * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant Thomson Reuters O +44 (0)20 7542 2402X 52402 M 07990562402 david.salter@thomsonreuters.com thomsonreuters.com ________________________________
2008-05-20 by hardware@doepfer.de
> That's great Dieter, > > How do different capacitor value affect the range in time, i.e. if I > replaced 100nF with 1000nF or 10nF what sort of difference would I > notice? 100nF -> 1000nF = tenfold the time or period 100nF -> 10nF = tenth part of the time or period > I was thi
2008-05-20 by David Salter
That's great Dieter, How do different capacitor value affect the range in time, i.e. if I replaced 100nF with 1000nF or 10nF what sort of difference would I notice? I was thinking that if it's a large difference to make a little pcb and have an additional switch to change from st
2008-05-20 by hardware@doepfer.de
> hiii, that would be great, thanks! We have added the timing capacitor positions of these modules: A-140 A-141 A-142 A-145 A-146 A-147 www(dot)doepfer(dot)com > PRODUCTS > A-100 > DIY page > Timing capacitors Best wishes Dieter Doepfer
2008-05-20 by hardware@doepfer.de
> The Module is _very_ useful for me. > Matching to 0,01% and paying finally a littlebit more would be the > better Deal at the end, > IMHO. > > thanks > H. It would be possible to equip the module with 100k/0,01% mathing resistors but this would increase the price clearly. The p
2008-05-20 by hardware@doepfer.de
> I noticed yesterday that when the my Velleman oscilloscope is on, > it adds a high-pictched frequency to the audio signal. Is there a > way to wire an off switch to this unit? > > Bryan I never noticed such a signal in our system. It might have two reasons: - The A-100 power su
2008-05-20 by hardware@doepfer.de
> Hi, > as sayed in the title i like to calibrate my A-185-2 precission adder. > It is not exactly 1V and not all Voltage adders are exactly 1V. > ( no, this is no critsm ) > > I must calibrate my VCOs and i like to have the precision adder as a > reference. > I see there are onl
2008-05-20 by hemi_ch
my A-185-2 has a difference of 2cents ( tonal) between the different switches. this seems to be too mutch for me to name it "precision" Adder. I hoped that i can trim this difference away. when i think that 1 Volt is divided by 12 to get semitones, 2 cents (of a Semitone) is not
2008-05-19 by partlydrone
it's ridiculous how much i want this module. --- In Doepfer_a100@yahoogroups.com, wrote: > > > Hello Dieter, do you know when you will release your planned A-189-1. > > I need a bit crusher soon and i`m visiting your site every week to > > control if this module is released. > >
2008-05-19 by Bryan E Cornell
I noticed yesterday that when the my Velleman oscilloscope is on, it adds a high-pictched frequency to the audio signal. Is there a way to wire an off switch to this unit? Bryan
2008-05-19 by hemi_ch
Hi, as sayed in the title i like to calibrate my A-185-2 precission adder. It is not exactly 1V and not all Voltage adders are exactly 1V. ( no, this is no critsm ) I must calibrate my VCOs and i like to have the precision adder as a reference. I see there are only two trimmers.
2008-05-19 by hardware@doepfer.de
> Hello Dieter, do you know when you will release your planned A-189-1. > I need a bit crusher soon and i`m visiting your site every week to > control if this module is released. The missing miniature rotary switches with 16 positions arrived end of last week and will be delivere
2008-05-19 by floris vanhoof
hiii, that would be great, thanks! + nobody had problems w/ headphones and modulars? --- In Doepfer_a100@yahoogroups.com, wrote: > > > can i speed up a146 lfo2? i think it's a little slower than a145 > > lfo 1, it sounds a bit lower in > > the "high" position too. > > > > thanks,
2008-05-19 by meic1965
Hello Dieter, do you know when you will release your planned A-189-1. I need a bit crusher soon and i`m visiting your site every week to control if this module is released.
2008-05-19 by hardware@doepfer.de
> Hi, > > I'm using a DIY kit #2 to convert an old euro rack into a Doepfer > case. Is it OK to connect the GND of the bus board to the aluminium > case? Yes Best wishes Dieter Doepfer
2008-05-18 by Bakis Sirros
Hello list, Selling my Plan B model 14 dual voltage procsssor. Selling this in fine cosmetic and working condition with screws and ribbon (hardly used, as i have too many mixers/processors). Price is 75% of new. That means: 213 USD plus 10 usd for shipping anywhere plus 4% paypal
2008-05-16 by Jilt van Moorst
Hi, I'm using a DIY kit #2 to convert an old euro rack into a Doepfer case. Is it OK to connect the GND of the bus board to the aluminium case? Then I could use metal bolts/nuts to attach the board to the bottom of the case Thanks, Jilt van Moorst
2008-05-15 by amnesia
> My Serge / Euro system has some panels banana jacked some not and I > bought 2 mults and made one side banana :-) So i have a pretend Buchla for now :-) > >
2008-05-15 by Bakis Sirros
ok, LOWER PRICE. in fine working and cosmetic condition: Analogue Systems RS-Integrator RS210 Fixed Filterbank module: 119 USD. (67% of new price) ( reason for sale: i have two of them in my AS modular and have to make room...) screws and cable included. paypal payment only, add
2008-05-15 by Bakis Sirros
sorry, prices are vice versa: 97.15 USD for the A123 HP filter, 60.3 USD for the A179 LCV Bakis Sirros --- Bakis Sirros wrote: > ok, in fine working and cosmetic condition: > > still left (i have five a179's and three a123's in > my > system, that's the only reason for sale): > >
2008-05-15 by hardware@doepfer.de
> can i speed up a146 lfo2? i think it's a little slower than a145 > lfo 1, it sounds a bit lower in > the "high" position too. > > thanks, floris You will have to replace the timing capacitors by other values. I can add the components overlay of the A-146 with the corresponding
2008-05-15 by Bakis Sirros
ok, in fine working and cosmetic condition: still left (i have five a179's and three a123's in my system, that's the only reason for sale): A179 Light To CV module (nice blue leds!): 97.15 USD A123 Curtis (CEM) 24db HighPass filter VCF4: 60.3 USD LOWER PRICE! (67% of new, in USD)
2008-05-14 by Bakis Sirros
hi all, i will be making a 3-hour analogue modular synthesis workshop (practical use of analogue modulars) based on the Doepfer A100 modular during the 3 days of Synch festival. links: http://www.doepfer.de/home_e.htm http://www.synch.gr/index.php?lang=1&cid=6 details for the wor
2008-05-14 by floris vanhoof
is it possible that i broke my sennheiser hd280 (64 ohm) headphones by listening to doepfer or formant modulars? the left speaker stopped working, and i only used it w/ my m-box and directly into doepfer/formant modules. + can i speed up a146 lfo2? i think it's a little slower th
2008-05-14 by Bakis Sirros
cause it seems a real nightmare to me, trying to short out the banana to banana, minijack to banana and minijack to minijack cables out of a cablemesh of hundreds of patchcords (really!). as my set-up is now, i only have to short out the banana's from the minijack cables and that
2008-05-14 by Anthony Rolando
So all you would need is a 4HP panel in the Doepfer case the took system gnd to a black banana socket. This saves alot of money, cables and space Bakis, why would you prefer to do it with banana to mini panels? Additionally, on complex patches, tracing cables would be easier. TOn
2008-05-14 by Bakis Sirros
btw, the serge psu has a black banana ground input on the back of it, so you do not need to make a ground banana socket in the serge modular at all. that's how you could ground the Serge psu to other serge psu's, or to other modular makers psu's. --- Anthony Rolando wrote: > > Ba
2008-05-14 by Bakis Sirros
yes, indeed that is a way to interface too. but, i prefer converter panels. --- Anthony Rolando wrote: > > Bakis was sayin that you need alot of banana to > mini-jack panels. I disagree with this. I think a > more economical solution (with regards to both space > and money) would
2008-05-14 by Anthony Rolando
Bakis was sayin that you need alot of banana to mini-jack panels. I disagree with this. I think a more economical solution (with regards to both space and money) would be to have a single 4hp system gnd panel. This module would connect to the doepfer powerbus and bring system GND
2008-05-14 by davevosh@aol.com
In a message dated 5/13/2008 1:31:55 PM Pacific Standard Time, bbaggett@baggettmccall.com writes: Has anyone any experience with or ideas about the wisdom of interfacing Doepfer modules with as Serge system ? 1. It seems that Doepfer audio modules run at 5 volts peak to peak (-2.
2008-05-14 by amnesia
Hi Bakis Yes you are correct Ross
2008-05-14 by amnesia
http://www.flickr.com/photos/cray5656/324130421/ I love my Serge euro system
2008-05-14 by Bakis Sirros
me too. --- implode7@comcast.net wrote: > > Actually, that's very good to know, since I'm > building a modcan/cynthia/serge system. I very much > like the metalbox stuff. > > -------------- Original message > ---------------------- > From: Bakis Sirros > > yes, Metalbox does bana
2008-05-13 by implode7@comcast.net
Actually, that's very good to know, since I'm building a modcan/cynthia/serge system. I very much like the metalbox stuff. -------------- Original message ---------------------- From: Bakis Sirros > yes, Metalbox does banana version modules, if you > want. > i have some banana me
2008-05-13 by Bakis Sirros
yes, Metalbox does banana version modules, if you want. i have some banana metalbox modules... --- implode7@comcast.net wrote: > > > Metalbox is frac rac, isn't it - mini jacks, not > bananas...unless he does those also. > -------------- Original message > ----------------------
2008-05-13 by Bakis Sirros
so far, i didn't have any problems interfacing my serge to any of the other modulars i have. indeed, serge working voltages range is +/-5volts, so it works fine with the doepfer, but as you would expect, in some instances, the output voltage of the doepfer modules will be partial
2008-05-13 by Guy D2
Metalbox is Frac indeed, and there's a few 3mm-or-banana modules. > > > Metalbox is frac rac, isn't it - mini jacks, not bananas...unless he > does those also. > -------------- Original message ---------------------- > From: Guy D2 > > > > > Has anyone any experience with or idea
2008-05-13 by implode7@comcast.net
Metalbox is frac rac, isn't it - mini jacks, not bananas...unless he does those also. -------------- Original message ---------------------- From: Guy D2 > > > Has anyone any experience with or ideas about the wisdom of > > interfacing Doepfer modules with as Serge system ? > > >
2008-05-13 by Guy D2
> Has anyone any experience with or ideas about the wisdom of > interfacing Doepfer modules with as Serge system ? > > 1. It seems that Doepfer audio modules run at 5 volts peak to peak > (-2.5v to +2.5v ?) - like the Serge - and uses bananna plugs too, so > great, right? > Doepf
2008-05-13 by williambbaggett
Has anyone any experience with or ideas about the wisdom of interfacing Doepfer modules with as Serge system ? 1. It seems that Doepfer audio modules run at 5 volts peak to peak (-2.5v to +2.5v ?) - like the Serge - and uses bananna plugs too, so great, right? 2. How about Panel
2008-05-13 by Julian
I have an a129/5 module left over from when i sold the other parts of my doepfer vocoder sub-system. Its the voiced / unvoiced detector, which can switch carrier signals accordingly. I am in england, and the local price here is GBP £64.00 excluding delivery I will sell this modul
2008-05-13 by Bakis Sirros
a116, a170, a122, a123 are now sold! but, i have more: one A123 module left 101UD and A179 Light to CV module (with blue leds!) 63 USD thank you, Bakis.
2008-05-13 by hardware@doepfer.de
> The first production runs used a different brand of mini jacks which > had some problems with reliability. According to list lore the > problems can be alleviated by gently pushing somewhere on the socket > with a small screwdriver - this procedure is described somewhere on > t
2008-05-13 by Silas Johansen
Thought I'd look it up for you and post the link here: http://www.doepfer.de/faq/a100_faq.htm#contact%20problems On Tue, May 13, 2008 at 1:56 PM, Silas Johansen wrote: > The first production runs used a different brand of mini jacks which > had some problems with reliability. Acc
2008-05-13 by Silas Johansen
The first production runs used a different brand of mini jacks which had some problems with reliability. According to list lore the problems can be alleviated by gently pushing somewhere on the socket with a small screwdriver - this procedure is described somewhere on the Doepfer
2008-05-13 by Floppy
i asked this before. when you use a vca in the patch its most likely the best point to go to the mixer after this module. but you can use any other output at any stage of your patch to either monitor the noises at this point or even record it, its not a matter of level or anythin
2008-05-13 by Guy D2
hi y'all, What's generally the last module you use before going out to the mixing desk/interface ? VCA/Panner/Mixer ? - Guy
2008-05-13 by aybee2004
Thanks Doug. We don't have Radio Shack here in the UK - it was Tandy for a while but they've all disappeared. Did check out the patch leads at Big City Music and they turn out to be from Analogue Systems in UK so I'll go ahead and order some. Along with the EMS licenced modules t