Yahoo Groups archive
Messages
Page 445 of 564 · 28179 messages matched
2004-05-13 by Tommy DOG
Hi Bruno, I will give you my review. I have (at this moment) only a system made up of a 6 space and 3 space rack, so it is pretty modest. I will continue to buy Doepfer products for a number of reasons. 1. the wide variety of modules. 2. the fact that he company cares about the u
2004-05-12 by Julian
(warning - this is a long post) >>There should be a noise if there is on one input no signal and a dry signal if he works. Is this right? Is it better to buy another Ringmod? Yes, there shouldnt be any sound when only one input is used, but there is. Do other manufacturers ring m
2004-05-12 by David Salter
I agree with Bakis on this one. I own a largish A100 system (100 modules) and a more modest AS system (30 modules) plus some of the larger format expensive modules by MOTM, as well as having had several older systems, Roland, Korg and ARP. The A100 system has a depth and characte
2004-05-12 by Florian Anwander
Hi Tom > [...] and though the > Doepfer doesn't sound as "present" as the Synton, [...] The problem for a comparison is, that there is no "Doepfer Vocoder", but some modules, that provide vocoder functions for the complete modular system. If you include other modules (e.g. Highpa
2004-05-12 by Bakis Sirros
hello bruno, i don't know why this reviewer isn't,but i am really pleased with my doepfer a100's sound and i'm using a huge system for four years now.i also have an integrator system and even the expensive technosaurus selector modular.but i don't really hear that much difference
2004-05-12 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, Kika LaCroix wrote: > > > > Hi to all (again)! > > Starter question No. 2: > How does the Doepfer Vocoder compare to the "classics" > such as Moog, EMS etc? > (Primilary soundwise, because I think the different > operation facilities like patc
2004-05-12 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, Kika LaCroix wrote: > > Hi to all! > > For the moment I don't own any Doepfer-Modules, but > I'm seriously thinking to add some modules to my > Roland 100-m. > Starter question No. 1: > Are there any modules, which could be used to clone a > E
2004-05-12 by James Husted
I devoted one portable Doepfer rack I have to emulating a AKS. It can sound in many ways similar and have the same functions, but what it lacks is the control voltage ranges are not as sensitive as on the AKS. I used to own 2 AKSs and a VCS3 and the VCOs would sweep a larger rang
2004-05-11 by ALMAGATA@telefonica.net
Hi Kika, There are a couple of modules by Analogue systems uk: EMS filter clone and EMS trapezoid clone. Well, you`ll get the the nice sound for the filter and the functions for the envelope shaper but cloning an EMS is more dificult than just have the individual modules: Each mo
2004-05-11 by Bakis Sirros
hello, if you would want to emulate the vcs3 filter(18db),you can use the a102 diode filter and any doepfer vca in combination with any envelope module(a140,a141) plus the comparator module(a167) for emulating the vcs3 envelope shaper with auto repeat.also,you need the a199 sprin
2004-05-11 by Bakis Sirros
hello, and of course the doepfer a129 vocoder sounds much better than my korg vc10 vocoder too!and,for sure,better than all the virtual vocoders i have(nord modular,ms2000r). as for creative posibilities,the doepfer has a huge number of available options, being modular. bakis. --
2004-05-11 by Tom Butcher
> Starter question No. 2: How does the Doepfer Vocoder > compare to the �classics� such as Moog, EMS etc? It sounds pretty good. I bought the basic A129 1/2 from a list member (hi Paul!), and I have been very happy with the results. It sounds good even without the addition of the
2004-05-11 by Kika LaCroix
Hi to all (again)! Starter question No. 2: How does the Doepfer Vocoder compare to the classics such as Moog, EMS etc? (Primilary soundwise, because I think the different operation facilities like patchboard make it difficult to compare them at this level). Greetings Kika _____
2004-05-11 by Kika LaCroix
Hi to all! For the moment I don't own any Doepfer-Modules, but I'm seriously thinking to add some modules to my Roland 100-m. Starter question No. 1: Are there any modules, which could be used to clone a EMS-VCS3? Greetings Kika ___________________________________________________
2004-05-11 by brunowalz
Hi everybody! I am looking forward to buy me a modular synthesizer. My budget is low (1600 ) so the one made by Doepfer is (maybe?) the best solution. Until now, I have a few questions about it I have read many tests of persons and magazines and there are some things that were c
2004-05-11 by Florian Anwander
Hi, Does anyone of you know, whether there is a module on the market (by any manufacturer), that "translates" DIN-Sync to different Clocksignals (1/8, 1/16, etc...) and Start/Stop- and Reset-Signals? Florian
2004-05-10 by Modular Fan
hello, Sorry for the late replies, as you can see I'm on digest. Kevin...thanks for the kind words. Hans...so I'm in the USA, Louisville, KY to be exact, but no problem shipping internationally. Paypal would be fine for payment if you're interested. Please reply privately so as t
2004-05-10 by mritenburg
Hi Ho! I'm selling an A-190 MIDI/CV/SYNC module. The sale of this module includes the +5v. My price is firm. Shipping and Handling are extra. I prefer to sell in the U.S. I accept paypal, however, if you pay via credit card on paypal, you pay the fees. A190 w/ +5v supply $125.00
2004-05-09 by Modular Fan
hello, Below is the list of Asys modules that I'm selling. Price is 70% of new prices at www.bigcitymusic.com All modules work perfectly and come with the ribbon cable and mounting screws. Some of below are on "hold" pending a final buyer decision. 1 x RS-20 Ring Mod 3 x RS-60 En
2004-05-09 by klamb000
Just a quick word about Shawn... I've had excellent dealings with him in the past on a couple of bigger ticket items, and would not hesitate dealing with him again. Top man, and quite a civilized person. Regards, Kevin --- In Doepfer_a100@yahoogroups.com, Modular Fan wrote: > hel
2004-05-09 by Hans Greuber
Hi; I might be interested in the AS envelopes, are you located in Europe¿ For How much? Thanks; Hans >From: Modular Fan >Reply-To: Doepfer_a100@yahoogroups.com >To: Doepfer_a100@yahoogroups.com >Subject: Re: [Doepfer_a100] Digest Number 851 >Date: Sun, 9 May 2004 12:12:10 -0700 (
2004-05-09 by klamb000
It had both Doepfer and ASol modules in it. Doug at Sonic Highway (www.sonichighway.com) has them for $80. I also put in a Doepfer bus board ($52 from Doug). Regards, Kevin --- In Doepfer_a100@yahoogroups.com, "rrooyyccee" wrote: > Interesting. Are you using any ASol modules in t
2004-05-09 by Modular Fan
hi royce and list, i don't have any doepfer envs for sale but i have some analogue systems envs (rs60) for sale and some other modules by asys. i am pulling them from my 8500 system to make room for more doepfer modules...like that killer new phaser. email privately or i'll post
2004-05-09 by rrooyyccee
Interesting. Are you using any ASol modules in the new case? Or just Doepfer? If you don't mind my asking, how much did you pay for the Doepfer power supply? Thanks! Royce --- In Doepfer_a100@yahoogroups.com, "klamb000" wrote: > Funnily enough, I had pretty much the same thing ha
2004-05-08 by klamb000
Funnily enough, I had pretty much the same thing happen. I recently replace the power supply from an ASol case that housed Doepfer modules. I replaced it with a Doepfer supply and have had no problems since. As for the modules, they all survived. Regards, Kevin --- In Doepfer_a10
2004-05-08 by Bakis Sirros
hello royce, i buy all the doepfer modules direct from doepfer,as there is no doepfer distributer in greece,and the modules that i told you they were in the warranty period. my concussor case had a broken regulator from the time it arrived in athens.so,i just sent the PSU pcb bac
2004-05-08 by Bakis Sirros
hello royce, that's really odd about your doepfer modules,as i have a huge system(230 doepfer modules)and i only had two broken modules in 4 years!one of these modules was repaired free of charge from doepfer,of course,and the other was replaced with a brand new one,free of charg
2004-05-08 by rrooyyccee
yes, i'm guessing it is the concussor case as well. . . power brown out perhaps. . . that could damage a module, no? how did you get your concussor fixed? and your doepfer modules. . . did you buy them directly from doepfer, or did you have a warranty? royce -- In Doepfer_a100@ya
2004-05-08 by rrooyyccee
hi folks, I am new to the list, but have been using doepfer modules in a analogue solutions concussor case for a few years now. i've had two modules fail on me in the last three years. . . but i only use about 6 doepfer modules, so that seems like a high failure rate. yesterday i
2004-05-05 by Julian
> Do you connect the batteries direct to the -/+12V lines or do you feed > them into the voltage stabilizers (7812/7912) in the power supply? I sold all my g6 racks in order to finance the new case.. ; ) In this, i dont use any circuitary between the batteries and the modules. In
2004-05-05 by Florian Anwander
Hi Julian > There isnt a whole load of difference in the price of the SLA batteries as > you increase Ah (at least to a point), just they get heavier. Depending on > your situation, if you decide to use the SLA type, you may like to get > larger ones, for future possibilities too
2004-05-05 by Julian
My system runs of two 12Ah sealed lead acid cells. Its 40 modules or so (12u) and runs for hours (i dont know how many - half a day or so) Two chargers are a good idea if you go this way, as the high Ah batteries take an age to charge. Theres an early photo of my setup in the pho
2004-05-05 by Florian Anwander
Hi, I am planning to participate the "Klangwanderung" of "Weltklang" on 15th of may (see http://www.weltklang-music.de/html/body_pics_moving_electronics.html). I want to go with a small A100 system which has to be battery powered. I am planning to use a system containing two A111
2004-05-04 by selfoscillate
hello list, yesterday i received the a197 analog meter and the a101/3 vactrol phaser. i will have some time to try them out during this week. anyway i did some short tests yesterday and want to share my thoughts. a197 ---- looks really nice. the three modes make sense. as dieter
2004-05-02 by Julian
Now i know this is off topic, but i couldnt find another worthy place to ask - The doepfer drehbank. Do many of you use this peice of kit? Ive recently aqquired one and its pretty nice. It was easy to program up for my jomox airbase, but i think it may be a strain for me to get a
2004-04-30 by braineeter
Thanks for the info Florian...good tips on the checking the A100's status after every separate module installation, and using a small mirror to directly dbl check power bus power cable pin alignment... FWIW I've got a self-made case (ie i bought my own Schroff subrack and accesso
2004-04-30 by Florian Anwander
Hi Glenn > improperly pin alignment where i attached a couple power cables to > the power bus... A tip for the future: power up the system after each new module. To test, whether the connector sits right. Before powering up I also use a small dentists mirror to have look at the c
2004-04-30 by braineeter
I like troubleshooting my own tech probs, and i this time is no exception, although I am chastened; the prob turned out to be improperly pin alignment where i attached a couple power cables to the power bus...can't believe that nothing got fried, but that appears to be the case..
2004-04-30 by braineeter
Greetings; Hoping to get some troubleshooting help here...I installed a couple new modules today (and rearranged a bunch of old ones), and at the end of the exercise my A100 won't come on.... The fuse looks ok, and i think juice is reaching the PSU (that big block on the switch l
2004-04-29 by Paul Schulz
correction: prices for all the modules / frames / patchcords are without shipping and handling!!! cheers, Paul
2004-04-29 by Paul Schulz
Hi list, I changed my plan: I won´t sell the whole Doepfer modular system, rather single modules. Here we go. ALL PRICES ARE IN EURO ! The stuff is located in D-10435 Berlin, Germany, Europe. two A-110 VCOs. each VCO 65 Euro one A-114 Ring Mod 30 Euro one A-118 Noise 30 Euro one
2004-04-28 by Bakis Sirros
you, lucky vince clark! many thanks for the review!i'm waiting for your opinion on the a101-3 modular phaser! bakis. --- selfoscillate wrote: > > hello list, > > last weekend i've received some new modules, > the most interesting are a137, a149/2 and a154. > > a137 > ---- > a gre
2004-04-28 by selfoscillate
hello list, last weekend i've received some new modules, the most interesting are a137, a149/2 and a154. a137 ---- a great module. creates fat sync-like sounds out of a single triangle/sine waveform. it is a bit difficult to get a neutral setting, but who wants that anyway? i tri
2004-04-28 by David Salter
I have come to the conclusion that those of us who use Doepfer products are very happy not with just the product but the service also. This is fine when these thoughts are being shared within the user group but I think we should make our thoughts heard in the wider world, else po
2004-04-28 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, Keld Sørensen wrote: > Yeah and hopefully anyone interested in Doepfer products will check > the yahoo group first - and not rely only on Harmony central. > As for customer support - Doepfer has the best I´ve ever seen. > Dieters comment that
2004-04-28 by Tommy DOG
The most stupid part is that there are few companies that not only respond to E-mail as fast but Doepfer are clearly as interested in it's user base and reacts to it with products that we want. As far as I'm concerned the ONLYproblem with Doepfer as a company is that they don't p
2004-04-27 by andrew dalio
If you look at all the other Doepfer reviews (albeit for different products), all the custmer service scores are excellent (pay close attention to the e-mail response scores). I've never had any problems with my A100 gear, and I suspect that if I did, Dieter would respond just as
2004-04-27 by David Salter
Not sure why this guy has gotten so worked up? Ask any Doepfer distributor (EMIS in the UK are excellent) and they will either do the upgrade or facilitate with Doepfer and considering that the control board and the main processor board are completely replaced, plus drilling hole
2004-04-27 by unknown freak
That Harmony Central review was written by a person? I'd assumed a lemur or something. > -----Original Message----- > From: klamb000 [mailto:lamb@charter.net] > Sent: Tuesday, April 27, 2004 11:06 AM > To: Doepfer_a100@yahoogroups.com > Subject: [Doepfer_a100] Re: Fwd: AW: why wo
2004-04-27 by Keld Sørensen
Yeah and hopefully anyone interested in Doepfer products will check the yahoo group first - and not rely only on Harmony central. As for customer support - Doepfer has the best I´ve ever seen. Dieters comment that he replies the day after on e-mails is true. Never any hesitation