Yahoo Groups archive
Messages
Page 456 of 564 · 28179 messages matched
2004-01-18 by Keld Sørensen
Yeah, mine hum too. Not in the audio path but you can hear the transformer buzz/hum. Keld --- In Doepfer_a100@yahoogroups.com, "p. hendricks" wrote: > On 1/17/04 11:40 PM, "Pierre Zeeman" wrote: > > > Hi all, > > > > Quick question: do your PSUs make an audible buzz/hum? > > no.
2004-01-18 by p. hendricks
On 1/17/04 11:40 PM, "Pierre Zeeman" wrote: > Hi all, > > Quick question: do your PSUs make an audible buzz/hum? no. I have 3 G6's-- all silent. That's something the Matrix 1000 was notorious for. best, pH
2004-01-18 by Pierre Zeeman
Hi all, Quick question: do your PSUs make an audible buzz/hum? I have recently moved and my a100 is now right in front of me and I can hear an audible humming coming from the case (there is no ground hum in the signal, though). I can't recall hearing this before, but then the com
2004-01-18 by ps_minor
> > I´m wondering about the plans to discontinue the foot controller module. = > I like pedals and foot switches very much. And since you can switch > mixtures on the subharmonic generator A-113 (which was done by foot > switches on the original trautonium) and this module has ev
2004-01-17 by synth_freak_2000
hello list, the poll about the BIT CRUNCHER module ends in 5 days.also the two poll about the MULTIPLE LFO and MULTIPLE ENVELOPE modules end in 10 days.so,please,take a minute and vote in these polls. thank you, bakis [doepfer_a100] group owner
2004-01-16 by Tommy DOG
Regarding Dieter's comments about the 149-1. I am happy to bow to his and maybe Christian's judjement as to whether their choice is "more" random and less of an attempt to clone Don Buchla's SOU module. My comment's were directly at whether this was a mistake or choice. In truth
2004-01-16 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] G9?? Prohibitive cost > of G6 hurts module buyers? > Date: Fri, 16 Jan 2004 16:17:13 +0100 > > please forward .................... (I hope this > will be the last one :-) > > > >
2004-01-16 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] Re: more news about the > a154 and other modules from doepfer. > Date: Fri, 16 Jan 2004 16:17:12 +0100 > > Please forward ... > > > -----Urspr'ngliche Nachricht----- > > Von: Tom
2004-01-16 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] Re: more news about the > a154 and other modules from doepfer. > Date: Fri, 16 Jan 2004 16:17:12 +0100 > > Please forward ... > > > --- In Doepfer_a100@yahoogroups.com, Bakis Sir
2004-01-16 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] Re: doepfer asking for > suggestions about a possible MULTI STAGE ENVELOPE > MODULE! > Date: Fri, 16 Jan 2004 16:17:12 +0100 > > Please forward ... > > > -----Urspr'ngliche Nachr
2004-01-16 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] Prohibitive cost of G6 > hurts module buyers? > Date: Fri, 16 Jan 2004 16:17:12 +0100 > > please forward ... > > > -----Urspr'ngliche Nachricht----- > > Von: grove@zeta.org.au [m
2004-01-16 by levka0
Hi There For me personally, the multi-EG's & LFO's are much more useful than a multistage EG. I have always avoided the multistage EG as I find them counter-intuitive to use. Regards Joost
2004-01-16 by levka0
Yeah, I am ready for a G9 case if it would be priced at 350-400 E --- In Doepfer_a100@yahoogroups.com, "p. hendricks" wrote: > What about a G9? Would that really add that much to the cost? Or would it be > similar to the difference from a G3 to G6? > > best, > phil
2004-01-16 by selfoscillate
hello bakis, i noticed that issue especially when using envelope followers with the a132. using an a140 or a141 should work better with the a132, but maybe it is just me because i tend doing unusual things when making percussive sounds :-) best wishes ingo --- In Doepfer_a100@yah
2004-01-16 by David Salter
Personal opinion would be both. Have looked at the what possibilities are available with the Encore MOTM format multistage, I would really like something similar (I know I could buy the Encore!). Multi EG's/LFO's are a great idea, I can never have enough mod sources. david -----O
2004-01-16 by Bakis Sirros
hi ingo, you're right.but i have never noticed the problem with percussive sounds and the linearity of the a132's. bakis. --- selfoscillate wrote: > > i like the a132, it is a handy module. but please > note that they > are linear, which means that they are not very > percussive.
2004-01-16 by Bakis Sirros
hello, i have lots of a132 and use them all the time.they're fine for audio and,actually,i prefer their sound than the newer version a131's. bakis. --- Bilinger wrote: > somehow I think I will also prefer a multiple eg or > multiple low cost > lfo even with no leds than a multist
2004-01-16 by selfoscillate
i like the a132, it is a handy module. but please note that they are linear, which means that they are not very percussive. for typical synth sounds they are fine and sound well, for synth percussion you should better use a vca with exponential response. also you have no pots on
2004-01-16 by p. hendricks
What about a G9? Would that really add that much to the cost? Or would it be similar to the difference from a G3 to G6? best, phil
2004-01-16 by Bilinger
somehow I think I will also prefer a multiple eg or multiple low cost lfo even with no leds than a multistage enveloppe. in fact the low cost lfo seemed a very good basic module to me. I am also questionning sometimes buying A132, the low cost vca. has anyone use this module? is
2004-01-16 by Bilinger
hello list yeah yeah yeah, I am definately interrested in small size doepfer box. I asked dieter about a year ago if there was any solution he could offer for this. i am a A100 user, I have only one portable case version G6, plus 10 -12 spare modules. I use both A100 for studio w
2004-01-16 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > dieter says: > "We (actually Christian Assall) looked at the A-149-1 > concerning Peter's comments. Christian modified the > module so that the rising edge triggers the random > voltages as described in the manual. We cou
2004-01-16 by selfoscillate
hello, my personal opinion is, that a multiple eg module will make much more sense that a multistage envelope. ok, the a154/a155 solution will be big, but it will also be the most versatile option we can get. best wishes ingo --- In Doepfer_a100@yahoogroups.com, Paul Schulz wrote
2004-01-16 by selfoscillate
hello rachel, dieter mentioned in earlier posts, that they don't earn money with the cases, so i guess that a cheaper price is not possible. it's all about the international exchange rates, so i guess there is nothing he can do. best wishes ingo --- In Doepfer_a100@yahoogroups.co
2004-01-16 by grove@zeta.org.au
Perhaps the solution is for Doepfer to sell G6 cases at a bargain price, which would make them more accessible to more musicians. This would mean Doepfer's core business (selling modules) would improve markedly. I can't justify the price for an empty G6 case with just a buss boar
2004-01-15 by ringmod45
--- In Doepfer_a100@yahoogroups.com, "Tommy DOG" wrote: > --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > dieter says: > > > > >" to emulate the > > behaviour of the original Buchla module it is true > > that 2 separate shift registers are the right > > solution. > >
2004-01-15 by Tommy DOG
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > dieter says: > >" to emulate the > behaviour of the original Buchla module it is true > that 2 separate shift registers are the right > solution. This Isn't clear whether this was an oversight in design or a mistake that
2004-01-15 by ringmod45
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > dieter says:> > Christian is also about to put the finishing touches > to the A-154 and he/we are not sure in some details. > If it comes to the details it is not so easy to decide > how the module should work. E.g. which
2004-01-15 by Bakis Sirros
dieter says: "We (actually Christian Assall) looked at the A-149-1 concerning Peter's comments. Christian modified the module so that the rising edge triggers the random voltages as described in the manual. We could not duplicate that the A-149-1 triggers on both the rising and f
2004-01-15 by Paul Schulz
hi folks, Well, for sure one can use the combination A-155 / A-154 as a nice multi-stage envelope, but 390 Euros is quite expensive. Although... Encore Electronics´ UEG is $289.00 plus MOTM PSU plus custom costs to Europe. Is a lot, too. I take everything back! Still the UEG take
2004-01-15 by Gdaluz
Hi Stefan I think I´m interested in the Vocoder,is it still avaiable? Please tell me something. Guilherme. -----Mensagem original----- De: sinus [mailto:electroschroeder@gmx.de] Enviada: qua 14-01-2004 12:40 Para: Doepfer_a100@yahoogroups.com Cc: Assunto: [Doepfer_a100] doepfer b
2004-01-14 by Bakis Sirros
dieter says: "we updated the pages of A-154, A-101-2, A-101-3 and A-172. On the A-172 page a nice application of one of our customers is published: emulation of the Korg 700 travel filter." ===== Bakis Siros Parallel Worlds / Polariton Athens-Greece [Doepfer_a100] group owner htt
2004-01-14 by H.Ph.Neevel
Hello Stefan, Are you from the Netherlands ??? If so, maybee I'am interested. Greetings, Harmen. ----- Original Message ----- From: sinus To: Doepfer_a100@yahoogroups.com Sent: Wednesday, January 14, 2004 1:40 PM Subject: [Doepfer_a100] doepfer basic modular synth for 990,- vocod
2004-01-14 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] Poll results for > Doepfer_a100 > Date: Wed, 14 Jan 2004 14:32:49 +0100 > > > The following Doepfer_a100 poll is now closed. > Here are the > > final results: > > > > > > POLL QU
2004-01-14 by sinus
hello list i want to sell a doepfer basic modularsynth in the G6 case like new for 990,-euro with the manual + patch cable modules : 110 + 110 + 114 + 115 + 116+ 138 + 120 + 121 + 131 + 130 + 190 + 118 + 148 +145 + 146 + 160 + 161 + 180 + 138 + 170 + 140 + 140 Newprice 1660,- EUR
2004-01-14 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: would you like DOEPFER to release a Multi stage envelope (with loop points) module? CHOICES AND RESULTS - yes, 36 votes, 90.00% - maybe, 4 votes, 10.00% - no, 0 votes, 0.00% For more informa
2004-01-14 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: Would you like doepfer to release a MULTIPLE ENVELOPE MODULE?(four or five AD or AR envelopes in a single module) o yes! o maybe o no To vote, please visit the following web page: http://groups.yahoo.c
2004-01-14 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: Would you like doepfer to release a MULTIPLE LFO MODULE?(with 4-5 lfo's in a single module ,each one with one or two waveforms only,possibly triangle) o yes! o maybe o no To vote, please visit the foll
2004-01-14 by selfoscillate
> b.t.w. We also think about a general Vactrol module > that has the resistor of the vactrol as output and a > control voltage + manual control as input (like > A-101-X). It would be a little bit a DIY-ish module as > it requires to solder the vactrol output across the > variable
2004-01-13 by neilwight
has anyone got an empty G6 case lying about that they dont need. ive run out of space in my G3 and need to expand it out into a G6 but can only seem to find people selling complete cases with PSUs and bus boards or pricey wooden racks for them. i can give you my empty G3 case alo
2004-01-13 by Bakis Sirros
dieter says: "We will update the front panel pictures of the Vactrol modules as we added the diplay LED to each Vactrol module. I have to point out that the photoresistor inside the vactrol is much more sensitive than the LED/human eye combination - even if we use low current LED
2004-01-13 by tompaulsen2002
It´s a revenge-thing! Because Apple is charging Europeans so much more for their computer and stuff here, we return the favour now with Doepfer...;))) --- In Doepfer_a100@yahoogroups.com, "p. hendricks" wrote: > On 12/27/03 9:25 AM, "(i think you can figure that out)" > wrote: >
2004-01-13 by selfoscillate
in addition to the multiple lfo suggestion, a retrigger input for each lfo would be nice, especially for the guys who need this for polyphonic use. my preferred waveform would be triangle or sine. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "levka0" wrote: > I would ver
2004-01-13 by David Salter
I agree. Multiple envelopes and LFO's are so useful. Part of the problem is that we all love the more esoteric modules as they can add something different, but with out plenty of modulation sources they just end up sounding static. David -----Original Message----- From: shm1400 [
2004-01-13 by levka0
I would very much welcome a multiple (4-5 in 8 HP?) LFO with only one basic waveform per output and nothing more than a single rate control pot. I would also welcome a 4-fold EG with A & R or perhaps A, S & D/R knobs and 4 gate channels, perhaps with common control knobs, to set
2004-01-13 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "Tommy DOG" wrote: > --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote > > > > Bakis: > > "so,any comments?????" > > The Bit module sound very exciting. These effects are usually only available in digital form so it's very good news. > T
2004-01-13 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > dieter says: > "We will probably advance the Bit Crunsher module as > we got a lot of response to this suggestion. But it > will be much more than a simple Bit Crunsher. It will > have probably 3 different controls (incl.
2004-01-12 by Tommy DOG
--- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote > > Bakis: > "so,any comments?????" The Bit module sound very exciting. These effects are usually only available in digital form so it's very good news. The one made by Frostwave effects is great sounding but it has no c/v c
2004-01-12 by shm1400
I, for one, would be very interested in a multiple envelope module. I tend to use a lot of envelopes in my patches, and many of them could easily be simple AD or AR envelopes. If a module had two or three of these in, say, an 8hp space it would be very helpful. (However, I often
2004-01-12 by Bakis Sirros
dieter says: "We will probably advance the Bit Crunsher module as we got a lot of response to this suggestion. But it will be much more than a simple Bit Crunsher. It will have probably 3 different controls (incl. external CV inputs): Value, Sample Time and Mode. The function of