Yahoo Groups archive

Fairlight-CMI

Index last updated: 2026-04-29 00:03 UTC

Messages

Browse messages

Page 48 of 109 · 5429 messages matched

Re: My Series III booting up (or not!)

2007-11-10 by buchla300

Hi Bill Thanks for that! I will check that out. Where is it located??? Thanks again David --- In Fairlight-CMI@yahoogroups.com, "billyrockplay" wrote: > > Hi David. Bill Rayner here. i have a series III, earlier rev. iencountered this problem before > and it turned out lithium ba

Thread view Attachments: 0

Re: My Series III booting up (or not!)

2007-11-09 by billyrockplay

Hi David. Bill Rayner here. i have a series III, earlier rev. iencountered this problem before and it turned out lithium battery had to be replaced. hope things work out for you. Bill --- In Fairlight-CMI@yahoogroups.com, "buchla300" wrote: > > My Series III booting up and stoppi

Thread view Attachments: 0

Re: My Series III booting up (or not!)

2007-11-09 by buchla300

Hello Harald! Right now it isn't terminated but I had the same situations when it was terminated last time I tried. I will put a different terminator on just in case the last one I tried had an issue. Possible I suppose!! Thanks David --- In Fairlight-CMI@yahoogroups.com, "Harald

Thread view Attachments: 0

Re: [Fairlight-CMI] My Series III booting up (or not!)

2007-11-09 by Harald Feldmann

David, are you terminating the SCSI connector in the back ? The software might be checking for more SCSI devices and think there is something connected while there is nothing. regards, Harald > My Series III booting up and stopping on the Fairlight E.S.P rev 9.34 > page > > Serie

Thread view Attachments: 0

Re: [Fairlight-CMI] New member saying hello!

2007-11-09 by Harald Feldmann

Hi David, Thought you had already joined long ago ! Best regards, Harald > Hi to all! > David Vandenborn put me onto the group and I joined up! > I have a series I, IIx and series III (mostly in need of a bit of help!) > Anyway, hopefully I can be of some use here ;-) > > David M

Thread view Attachments: 0

Re: IIx for sale on Vemia

2007-11-09 by buchla300

Here is my Series I and it looks very similar. I would presume it is a Series I that has been upgraded to a Series II Series I front panel --- In Fairlight-CMI@yahoogroups.com, Alexander Guelfenburg wrote: > > Hi guys, > > well, if you watch the picture of the opened mainframe th

Thread view Attachments: 0

Re: Analogue interface

2007-11-09 by buchla300

Here is a picture of my Analog Interface on my IIx. Analogue Interface It is just SUB D Connectors on the back, so I presume these would go straight to a console or to a breakout box which mine doesn't have --- In Fairlight-CMI@yahoogroups.com, Jean-Bernard EMOND wrote: > > good

Thread view Attachments: 0

My Series III booting up (or not!)

2007-11-09 by buchla300

My Series III booting up and stopping on the Fairlight E.S.P rev 9.34 page Series III booting pics Maybe someone can help me with what might be happening! It was upgraded by Peter Wielk and worked until I moved from Germany to Belgium. Then it lay dormant for a while and when I b

Thread view Attachments: 0

Re: [Fairlight-CMI] Re: Analogue interface

2007-11-09 by Jean-Bernard EMOND

good ;) Le 9 nov. 07 à 08:58, buchla300 a écrit : > I have an analog interface too and it looks different. It is a long > strip about 1 inch high that runs along the back of the system. I'll > take a photo later. > Never worked it out though! > > --- In Fairlight-CMI@yahoogroups.

Thread view Attachments: 0

Re: Analogue interface

2007-11-09 by buchla300

I have an analog interface too and it looks different. It is a long strip about 1 inch high that runs along the back of the system. I'll take a photo later. Never worked it out though! --- In Fairlight-CMI@yahoogroups.com, jbemond@... wrote: > > Selon Malte Rogacki : > > > I actu

Thread view Attachments: 0

New member saying hello!

2007-11-09 by buchla300

Hi to all! David Vandenborn put me onto the group and I joined up! I have a series I, IIx and series III (mostly in need of a bit of help!) Anyway, hopefully I can be of some use here ;-) David Morley

Thread view Attachments: 0

Re: IIx for sale on Vemia

2007-11-09 by buchla300

--- In Fairlight-CMI@yahoogroups.com, "dvdborn" wrote: > > Looking at the pictures of the Fairlight at VEMIA I see an XLR-output at the back labelled > Sampling Filter Out. > > What's the purpose of that output? > > David > http://dvdborn.blogspot.com > Hi David! I believe it is

Thread view Attachments: 0

Re: Trimpots

2007-11-09 by pstnotpd

Tnx guys, missed that one in the diagnostics section. Thought I had to look in the (non available) channel card schematics. Cheers, Patrick

Thread view Attachments: 0

RE: [Fairlight-CMI] Analogue interface

2007-11-09 by jbemond@free.fr

Hi Tim, do you have a picture of your CMI-07 card ? JB Selon Tim Curtis : > I have one of these as well, although mine is black in color. > > Actually, the external box is nothing but a break out box for the jacks - no > electronic components besides wires and jacks in there. > >

Thread view Attachments: 0

RE: [Fairlight-CMI] Analogue interface

2007-11-09 by Tim Curtis

I have one of these as well, although mine is black in color. Actually, the external box is nothing but a break out box for the jacks - no electronic components besides wires and jacks in there. All the CVs come directly from the card. Tim -----Original Message----- From: Fairlig

Thread view Attachments: 0

Re: [Fairlight-CMI] Analogue interface

2007-11-09 by jbemond@free.fr

Selon Malte Rogacki : > I actually do have the analog interface (not just the card), like this ? > but since my > own IIx has been dead for several years now I can't check it. Yes, I intend > to fix it very soon now. I believe my CMI-02 card is bad. > > -- > Malte Rogacki gacki@g

Thread view Attachments: 0

Re: [Fairlight-CMI] Analogue interface

2007-11-08 by Malte Rogacki

I actually do have the analog interface (not just the card), but since my own IIx has been dead for several years now I can't check it. Yes, I intend to fix it very soon now. I believe my CMI-02 card is bad. -- Malte Rogacki gacki@gacki.sax.de ------------------------------------

Thread view Attachments: 0

nformation about Stavewriter, Film Music Processor, and others...

2007-11-08 by jbemond@free.fr

who has information in connection with : - CMI I / Qasar Service manual, - Stavewriter (soft), - Film Music Processor (soft), - Analog interface card - CMI-07 [slot 11], - 4 port ACIA Module - Q014 [slot 15], - Channel card - CMI-01, - Hard disk / Tape DMA Interface - Q-077, - Fa

Thread view Attachments: 0

Re: [Fairlight-CMI] Analogue interface

2007-11-08 by jbemond@free.fr

Selon NormLeete@aol.com: > Hi everyone, > > Does anyone have any info on the CMI-07 analogue interface card? Was there a > manual? > > Regards, > Norm Hi, I know "PAGE A" for Analog... but write "help" on command line dont give help :( After this... none form me... Analog interfa

Thread view Attachments: 0

Analogue interface

2007-11-08 by NormLeete@aol.com

Hi everyone, Does anyone have any info on the CMI-07 analogue interface card? Was there a manual? Regards, Norm

Thread view Attachments: 0

Re: [Fairlight-CMI] Trimpots

2007-11-08 by Jean-Bernard EMOND

Le 8 nov. 07 à 20:31, Peter Kersten a écrit : > Here is a list I made a while ago, while calibrating my IIx. VR7 Is > the top-one. > > The pagenumbers are the actual original pagenumbers of the > service-manual. The numbers in the PDF are higher. (Also there are two > versions ou

Thread view Attachments: 0

Re: [Fairlight-CMI] Trimpots

2007-11-08 by Harald Feldmann

Thanks Peter ! :) > Here is a list I made a while ago, while calibrating my IIx. VR7 Is > the top-one. > > The pagenumbers are the actual original pagenumbers of the > service-manual. The numbers in the PDF are higher. (Also there are two > versions out there. One is scanned in w

Thread view Attachments: 0

Trimpots

2007-11-08 by Peter Kersten

Here is a list I made a while ago, while calibrating my IIx. VR7 Is the top-one. The pagenumbers are the actual original pagenumbers of the service-manual. The numbers in the PDF are higher. (Also there are two versions out there. One is scanned in wrong, the pages are not straig

Thread view Attachments: 0

Re: IIx for sale on Vemia

2007-11-08 by dvdborn

Looking at the pictures of the Fairlight at VEMIA I see an XLR-output at the back labelled Sampling Filter Out. What's the purpose of that output? David http://dvdborn.blogspot.com

Thread view Attachments: 0

Re: [!! SPAM] Re: [Fairlight-CMI] IIx for sale on Vemia

2007-11-08 by Harald Feldmann

I'll check if there is a section on the settings this weekend and let you know in a mail. Probably the description of the right setting will help you. Regards, Harald >> I may have a description in one of my service manuals. >> But why would you want to have them all have the sam

Thread view Attachments: 0

Re: [!! SPAM] Re: [Fairlight-CMI] IIx for sale on Vemia

2007-11-08 by Harald Feldmann

Hi Patrick, I may have a description in one of my service manuals. But why would you want to have them all have the same volume ? It is a strength of the Fairlight that each voice has its own volume. In real life, violin players also do not have exactly the same volume. It adds t

Thread view Attachments: 0

[!! SPAM] Re: [Fairlight-CMI] IIx for sale on Vemia

2007-11-08 by pstnotpd

> I may have a description in one of my service manuals. > But why would you want to have them all have the same volume ? It is a > strength of the Fairlight that each voice has its own volume. In real > life, violin players also do not have exactly the same volume. It adds to >

Thread view Attachments: 0

[!! SPAM] Re: [Fairlight-CMI] IIx for sale on Vemia

2007-11-08 by pstnotpd

> This extra card is a series I card, since it has only one trim pot. > It is the most left card in the spare parts picture. The series > II/IIX cards have got 7 pots. Does anybody have a description of what these 7 pots actually do? I've got a download of the service manual, but

Thread view Attachments: 0

Re: [Fairlight-CMI] Re: IIx for sale on Vemia

2007-11-07 by WT

Because this is a combined auction-lot with all the remaining Fairlight-stuff from the Dutch Fairlight-distributor, Synton. Buy this and you´ll get a lot of stuff that you probably won´t need. Or, maybe you do ! I´d say the price is right, for the right person. Don´t expect it to

Thread view Attachments: 0

Re: [!! SPAM] Re: [Fairlight-CMI] IIx for sale on Vemia

2007-11-07 by WT

This item is clearly for a super Fairlight user !! Not for me then ;-) WT http://medlem.spray.se/waveterm/LJLab2006/ ----- Original Message ----- From: Alexander Guelfenburg To: Fairlight-CMI@yahoogroups.com Sent: Wednesday, November 07, 2007 2:46 PM Subject: Re: [!! SPAM] Re: [F

Thread view Attachments: 0

Re: [!! SPAM] Re: [Fairlight-CMI] IIx for sale on Vemia

2007-11-07 by Alexander Guelfenburg

At 14:24 07.11.2007, you wrote: Yes, one is missing. But, there is included one card "extra". Read the description. This extra card is a series I card, since it has only one trim pot. It is the most left card in the spare parts picture. The series II/IIX cards have got 7 pots. I

Thread view Attachments: 0

Re: [Fairlight-CMI] IIx for sale on Vemia

2007-11-07 by WT

Then by all means place a bid :-) WT http://medlem.spray.se/waveterm/LJLab2006/ ----- Original Message ----- From: Alexander Guelfenburg To: Fairlight-CMI@yahoogroups.com Sent: Wednesday, November 07, 2007 2:25 PM Subject: Re: [Fairlight-CMI] IIx for sale on Vemia At 14:12 07.11.

Thread view Attachments: 0

Re: [Fairlight-CMI] IIx for sale on Vemia

2007-11-07 by Alexander Guelfenburg

At 14:12 07.11.2007, you wrote: >I can tell one is missing in the mainframe ... Indeed! But this would be a minor issue since I have some channel cards in spare :-) Alexander

Thread view Attachments: 0

Re: [Fairlight-CMI] IIx for sale on Vemia

2007-11-07 by WT

Yes, one is missing. But, there is included one card "extra". Read the description. However, I have not been able to get any info on what cards are mounted in the frame, what version they are. WT http://medlem.spray.se/waveterm/LJLab2006/ ----- Original Message ----- From: Lauren

Thread view Attachments: 0

IIx for sale on Vemia

2007-11-07 by Alexander Guelfenburg

Hi guys, well, if you watch the picture of the opened mainframe then you can see that there is one card for the lightpen and another card for the video monitor. So this is an old 6800 system with the new series II voice cards. (The words "old" and "new" have a funny meaning in th

Thread view Attachments: 0

Re: [Fairlight-CMI] IIx for sale on Vemia

2007-11-07 by Harald Feldmann

I am answering my own question here. I had not found the photo option at first. Indeed this is a II at best. Not a IIx, so without MIDI. That also explains the lower bid price. A MIDI retrofit kit will be hard to find and cost $$$$. Thanks for pointing this out to us though, Hans

Thread view Attachments: 0

Re: [Fairlight-CMI] IIx for sale on Vemia

2007-11-07 by Harald Feldmann

Do you mean to say that it is a I, II or III instead or a different machine altogether ? I was misdirected because you added the link to the PPGs. The excel sheet clearly says it is a fairlight. > It is not a CMI IIx > > WT > > http://medlem.spray.se/waveterm/LJLab2006/ > > -----

Thread view Attachments: 0

Monitor for series III

2007-11-06 by NYMO's

Hi there, Just wondered if someone could give me the makes and models of the *LCD* sized type monitor that was originally in the Series III ad ?? I presume these would be compat with a MFX2 ?? Cheers N Y M O

Thread view Attachments: 0

Re: [Fairlight-CMI] IIx for sale on Vemia

2007-11-06 by WT

It is not a CMI IIx WT http://medlem.spray.se/waveterm/LJLab2006/ ----- Original Message ----- From: Hans Nijhof To: Fairlight-CMI@yahoogroups.com Sent: Tuesday, November 06, 2007 10:27 PM Subject: [Fairlight-CMI] IIx for sale on Vemia just came across this one. http://www.sphere

Thread view Attachments: 0

IIx for sale on Vemia

2007-11-06 by Hans Nijhof

just came across this one. http://www.spheremusic.com/Bargaindtl.asp?Item=5553 Also check out the other items the owner is selling. His name is Felix Visser, he owned in the eighties/nineties the Synton company in the Netherlands. They were distributor of PPG, Fairlight, Linn and

Thread view Attachments: 0

Fairlight CMI Series III sample cd?

2007-11-06 by antonyp69

Dear Members, Most of us know that there is a Fairlight CMI Series IIx sample cd from Pro-Rec Sounds. Is there a Fairlight CMI Series III sample library cd available? Regards, Antony

Thread view Attachments: 0

Re: Emu Emulator 1 v. CMI IIx

2007-10-30 by daniel_iix

Kevin (and Harald too!), Thanks for the input - I'm going for it! It's a one owner machine, all docs, and everything, so it really is a good find. As much as I loved my IIx, it too went to a good home, and frankly, the cost of repairs and utter lack of spares scared me into selli

Thread view Attachments: 0

Re: [Fairlight-CMI] Emu Emulator 1 v. CMI IIx

2007-10-30 by kevin kelley

Hello, I had both the IIx and the E1 I still have the E1 and I will not sell it! it sounds great, different than a IIx, but great! I do not regret selling my IIx's they went to a good home, but the E1 will fill your need for "that 80's smapler sound" and do it quite well. The E1

Thread view Attachments: 0

Re: [Fairlight-CMI] Emu Emulator 1 v. CMI IIx

2007-10-30 by Harald Feldmann

Daniel, if the price is right just go and buy it. How often have you seen an emulator 1 ? I saw one on ebay about a year ago, over a 5 year timespan, and decided not to buy it. I'm more into Fairlight. If you don't like it, just resell it. Enjoy life and take chances ! Regards, H

Thread view Attachments: 0

Re: [Fairlight-CMI] SonicState.com Top 5 Samplers

2007-10-30 by Peter Connelly

Interesting find... Thanks John :-) Kind regards, Peter On Oct 30, 2007 12:03 AM, JOHN HOPKINS john.hopkins2@btinternet.com > wrote: Interesting clip, enjoy http://www.sonicstate.com/news/shownews.cfm?newsid=5525

Thread view Attachments: 0

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.